By default FreeBSD does not have 'gcc' in the PATH (on common platforms).
As on Linux 'cc' is available as a link to the default compiler (Clang or
GCC), so just use 'cc'.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Message-Id: <20191115155108.39488-1-emaste@freefall.freebsd.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If there is trailing zero, fdtget adds extra chacarter to the
property value. Thus comparing the expected with the actual
value, an error is emitted.
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Message-Id: <20191111080444.9819-3-stefan@olimex.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
BSD sed requires that an extension is provided to the -i (in-place edit)
flag, which may immediately follow the -i or may be separated by a space -
sed -i .bak and sed -i.bak are equivalent. The extension is optional with
GNU sed, but if provided must immediately follow the -i. Thus, sed -i.bak
behaves identically with both GNU and BSD sed.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Message-Id: <20191114203615.2866-1-emaste@freefall.freebsd.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When applying overlays, we merge symbols from the overlay into the target
tree. At the moment the logic for this assumes all symbols in the overlay
are attached to a node of the form:
/fragment@XXX/__overlay__/relative/path
And will end up applied to the relative/path node under the fragment's
target.
However, this disallows the case of a symbol in the form just:
/fragment@XXX/__overlay__
This does have a pretty obvious sensible meaning: attach the new symbol
directly to the fragment's target, but we don't currently do that.
It's pretty easy to workaround this limitation in one's overlays, but it's
also easy to handle in the overlay applying code, so we might as well
extend it to cover this case.
Reported-by: Christophe Braillon
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This adds a test case to demonstrate some issue seen when applying
overlays using 'fdtoverlay'. It fails with FDT_ERR_NOSPACE:
- with long target path
- symbols in order to use these nodes in possible subsequent overlay.
This is seen with this patch, by running:
$ make check # Reports a failed test
$ ./fdtoverlay -i tests/overlay_base.test.dtb -o out.dtb \
tests/overlay_overlay_long_path.fdoverlay.test.dtb
Failed to apply tests/overlay_overlay_long_path.fdoverlay.test.dtb (-3)
This overlay fails to apply, because dtb size is close to modulo 1024
bytes chunk: utilfdt_read() -> utilfdt_read_err() -> bufsize = 1024.
As there is not much extra space in the blob to resolve symbols (long
target path), it fails with FDT_ERR_NOSPACE. In fdtoverlay, size is :
/* grow the blob to worst case */
blob_len = fdt_totalsize(blob) + total_len;
I can see assumption is made that result should be lower than:
- base fdt size + overlay size. Is there a simple way to find to know
what the final size is?
I'm not sure what the correct fix might be, for such (worst) case?
Similar issue is also seen in u-boot/common/image-fit.c that implements
similar approach (e.g. base fdt size + overlay size).
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Message-Id: <1538553302-1353-1-git-send-email-fabrice.gasnier@st.com>
[dwg: To avoid breaking bisection, I committed this after a fix, so
the "failed" description is no longer accurate]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The typos have been discovered with the "codespell" utility.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190520081209.20415-1-thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Searching for duplicate names scales O(n^2) with the number of names
added to a fdt, which can cause a noticable slowdown with larger device
trees and very slow CPU cores.
Add FDT_CREATE_FLAG_NO_NAME_DEDUP that allow the caller to trade fdt size
for speed in the creation process.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20190509094122.834-4-npiggin@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If fdt_add_property or fdt_property_placeholder fail after allocating
a string for the name, they return without freeing that string. This
does not change the structure of the tree, but in very specific cases
it could lead to undesirable space consumption.
Fix this by rolling back the string allocation in this situation.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20190509094122.834-2-npiggin@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently the libfdt based tools (fdtput, fdtget, etc.) and all the
test binaries using libfdt are linked against the static version of libfdt.
That's made it very easy in the past to forget to properly update the
version.lds file which is needed to make functions publicaly accessible
from the shared library.
To avoid problems like that in future, alter the build so that we link and
run the tests against the shared library version of libfdt.
That immediately points out several important symbols that are still
missing from the version.lds, so fix those as well.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
tests.sh has a bunch of shell setup that's sourced in a number of other
scripts. It _doesn't_ actually run a bunch of tests, which is kind of what
the name suggests. So rename it to be more obvious.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This function will append an address range property using parent node's
"#address-cells" and "#size-cells" properties.
It will be used in implementing kdump with kexec_file_load system call
at linux kernel for arm64 once it is merged into kernel tree.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Message-Id: <20190327061552.17170-2-takahiro.akashi@linaro.org>
[dwg: Correct a SEGV error in the testcase]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Python 3 C extensions have suffix containing platform, Python version
and another details in the name so the condition has to be extended.
Signed-off-by: Lumir Balhar <lbalhar@redhat.com>
Message-Id: <20190218164856.23861-5-frenzy@frenzy.cz>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When some warning appears in test result, "ok" is still
at the end of the line but without three dots.
Signed-off-by: Lumir Balhar <lbalhar@redhat.com>
Message-Id: <20190218164856.23861-4-frenzy@frenzy.cz>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This function does not have its own test at present. Add one.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Python 2 is still the default but it can be changed by
setting environment variable PYTHON before build/test.
Signed-off-by: Lumir Balhar <lbalhar@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The logic in wrap_test() was effectively squashing valgrind errors into
the "FAIL" bucket rather than their own bucket as intended. Correct it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Otherwise the FAIL results won't be accounted for in the summary.
Easily testable by artifically causing them to fail:
- if [ $(($size % $align)) -eq 0 ] ;then
+ if [ $(($size % $align)) -eq 666 ] ;then
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit 8c59a97ce0 ("Fix missing labels when emitting dts format")
fixed label output, but broke output when there is a REF_PATH marker.
The problem is a REF_PATH marker causes a zero length string to be
emitted. The write_propval_string() function requires a length of at
least 1 (including the terminating '\0'), but that was not being
checked.
For the integer output, a length of 0 is valid as it is possible to have
labels inside the starting '<':
int-prop = < start: 0x1234>;
REF_PHANDLE is another marker that we don't explicitly handle, but it
doesn't cause a problem as it is fundamentally just an int.
Fixes: 8c59a97ce0 ("Fix missing labels when emitting dts format")
Reported-by: Kumar Gala <kumar.gala@linaro.org>
Cc: Grant Likely <grant.likely@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This commit adds test cases for commits "Correct overlay syntactic
sugar for generating target-path fragments" and "Merge nodes with
local target label references".
It verifies that target path references are not resolved locally and
that target label references that can be resolved locally are.
Signed-off-by: Fredrik Markstrom <fredrik.markstrom@gmail.com>
[dwg: Fixed some whitespace problems]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since commit 7975f64222 ("Fix widespread incorrect use of strneq(),
replace with new strprefixeq()") simple-bus checks have been silently
skipped. The problem was 'end - str' is one more than the string length
and the strnlen in strprefixeq fails. This can't be fixed simply by
subtracting one as it is possible to have multiple '\0' at the end of
the property. Fix this by making the 'compatible' property string list
check a dependency, and then we can assume the property is null
terminated and we can just use streq() for comparisons.
Add some tests so the problem doesn't happen again.
Fixes: 7975f64222 ("Fix widespread incorrect use of strneq(), replace with new strprefixeq()")
Reported-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
YAML encoded DT is useful for validation of DTs using binding schemas.
The YAML encoding is an intermediate format used for validation and
is therefore subject to change as needed. The YAML output is dependent
on DTS input with type information preserved.
Signed-off-by: Grant Likely <grant.likely@arm.com>
[robh: make YAML support optional, build fixes, Travis CI test,
preserve type information in paths and phandles]
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz added a trivial test of the -I fs mode recently, which was
previously basically untested. This is an oversight, since we
recently had a bug which completely broke it.
This replaces Greg's test with a more thorough test of -I fs mode. We
use a test helper to create the familiar test_tree1 in "fs" form, then use
dtc -I fs to process it, and check that the results match what they
should.
We only check the content in -I fs -O dtb mode, since that's simplest,
but we do run -I fs -O dts mode as well to make sure it doesn't blow
up (the aforementioned bug caused just such a blow up, specific to -O
dts mode, for example).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Some recent changes caused '-I fs -O dts' to crash instantly when
emitting the first property holding actual data, ie, coming from
a non-empty file. This got fixed already by another patch.
This simply adds a test for the original problem.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add internal fdt_cells() to avoid copy and paste. Test error cases and
default values. Fix typo in fdt_size_cells() documentation comment.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We primarily test fdt_resize() in the sw_tree1 testcase, but it has
some deficiencies:
- It didn't check for errors actually originating in fdt_resize(),
just for errors before and after
- It only tested cases where the resized buffer was at the same
address as the original one, whereas fdt_resize() is also supposed
to work if the new buffer is entirely separate, or partly
overlapping
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If datatype markers are present in the property value, use them to
output the data in the correct format instead of trying to guess the
datatype. This also will preserve data grouping, such as in an
interrupts list.
This is a step forward for preserving and using datatype information
when processing DTS/DTB files. Schema validation tools can use the
datatype information to make sure a DT is correctly formed and
intepreted.
Signed-off-by: Grant Likely <grant.likely@arm.com>
[robh: rework marker handling and fix label output]
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
'prop_name_chars' is not a valid check name, but the test was passing due
to a bug in dtc-checkfails.sh. Fix it to be the correct name,
'property_name_chars'.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Extend the Properties class with some functions to read a single integer
property. Add a new getprop_obj() function to return a Property object
instead of the raw data.
This suggested approach can be extended to handle other types, as well as
arrays.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This new function implements a complete and thorough check of an fdt blob's
structure. Given a buffer containing an fdt, it should return 0 only if
the fdt within is structurally sound in all regards. It doesn't check
anything about the blob's contents (i.e. the actual values of the nodes and
properties), of course.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Simon Glass <sjg@chromium.org>
fdt_num_mem_rsv() and fdt_get_mem_rsv() currently don't sanity check their
parameters, or the memory reserve section offset in the header. That means
that on a corrupted blob they could access outside of the range of memory
that they should.
This improves their safety checking, meaning they shouldn't access outside
the blob's bounds, even if its contents are badly corrupted.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Simon Glass <sjg@chromium.org>
fdt_string() is used to retrieve strings from a DT blob's strings section.
It's rarely used directly, but is widely used internally.
However, it doesn't do any bounds checking, which means in the case of a
corrupted blob it could access bad memory, which libfdt is supposed to
avoid.
This write a safe alternative to fdt_string, fdt_get_string(). It checks
both that the given offset is within the string section and that the string
it points to is properly \0 terminated within the section. It also returns
the string's length as a convenience (since it needs to determine to do the
checks anyway).
fdt_string() is rewritten in terms of fdt_get_string() for compatibility.
Most of the diff here is actually testing infrastructure.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Currently fdt_check_header() performs only some rudimentary checks, which
is not really what the name suggests. This strengthens fdt_check_header()
to check as much about the blob as is possible from the header alone: as
well as checking the magic number and version, it checks that the total
size is sane, and that all the sub-blocks within the blob lie within the
total size.
* This broadens the meaning of FDT_ERR_TRUNCATED to cover all sorts of
improperly terminated blocks as well as just a structure block without
FDT_END.
* This makes fdt_check_header() only succeed on "complete" blobs, not
in-progress sequential write blobs. The only reason this didn't fail
before was that this function used to be called by many RO functions
which are supposed to also work on incomplete SW blobs.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Simon Glass <sjg@chromium.org>
When creating a tree with the sequential write functions, certain things
have to be done in a certain order. You must create the memory reserve map
and only then can you create the actual tree structure.
The -FDT_ERR_BADSTATE return code is for if you try to do things out of
order. However, we weren't checking that very thoroughly, so it was
possible to generate a corrupted blob if, for example, you started calling
fdt_begin_node() etc. before calling fdt_finish_reservemap().
This makes the state checking more thorough disallow that.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Simon Glass <sjg@chromium.org>
The newly introduced /omit-if-no-ref/ needs a few test cases, make
sure to test them.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add checks for DT graph bindings. These checks check node names,
unit-addresses and link connections on ports, port, and endpoint nodes.
The graph nodes are matched by finding nodes named 'endpoint' or with a
'remote-endpoint' property. We can't match on 'ports' or 'port' nodes
because those names are used for non-graph nodes. While the graph nodes
aren't really buses, using the bus pointer to tag matched nodes is
convenient.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Child nodes with the same unit-address (and different node names) are
either an error or just bad DT design. Typical errors are the unit-address
is just wrong (i.e. doesn't match reg value) or multiple children using the
same overlapping area. Overlapping regions are considered an error in new
bindings, but do exist in some existing trees. This check should flag
most but not all of those errors. Finding all cases would require doing
address translations and creating a full map of address spaces.
Mixing more than one address/number space at a level is bad design. It only
works if both spaces can use the same #address-cells and #size-cells sizes.
It also complicates parsing have a mixture of types of child nodes. The
best practice in this case is adding child container nodes for each
address/number space or using additional address bits/cells to encode
different address spaces.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We've recently added "syntactic sugar" support to generate runtime dtb
overlays using similar syntax to the compile time overlays we've had for
a while. This worked with the &label { ... } syntax, adjusting an existing
labelled node, but would fail with the &{/path} { ... } syntax attempting
to adjust an existing node referenced by its path.
The previous code would always try to use the "target" property in the
output overlay, which needs to be fixed up, and __fixups__ can only encode
symbols, not paths, so the result could never work properly.
This adds support for the &{/path} syntax for overlays, translating it into
the "target-path" encoding in the output. It also changes existing
behaviour a little because we now unconditionally one fragment for each
overlay section in the source. Previously we would only create a fragment
if we couldn't locally resolve the node referenced. We need this for
path references, because the path is supposed to be referencing something
in the (not yet known) base tree, rather than the overlay tree we are
working with now. In particular one useful case for path based overlays
is using &{/} - but the constructed overlay tree will always have a root
node, meaning that without the change that would attempt to resolve the
fragment locally, which is not what we want.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
So far, the tests for generating runtime overlays with dtc weren't checking
the syntactic sugar. This adds such a test.
Furthermore the existing tests were only minimally testing dtc's output
for the overlay. This adds a test comparing the dtc output with the
more or less manually constructed overlays we already have for testing
libfdt's overlay application code. This does require some minor changes
to that manually constructed overlay which don't change the sematics but
re-order / rename things to match the way dtc does it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
GNU stat(1) uses '-c "%s"' as the proper invocation to print filesize of the
file in question, while BSD stat(1) uses '-f "%Uz"'. Do some trivial
autodetection to check if we're using GNU stat(1) and assume we're using BSD
stat(1) if we don't detect otherwise.
This should allow the test suite to run properly out-of-the-box on *BSDs and
MacOS in addition to the current Linux support.
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
stat -c %s's equivalent on FreeBSD is stat -f %Uz; these differ enough, allow
STATSZ in the environment to specify local replacement for a stat that outputs
size in bytes of an argument.
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add some checks for /chosen node. These check that chosen is located at
the root level and that bootargs and stdout-path properties are strings.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add a string list check for common properties ending in "-names" such as
reg-names or interrupt-names.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add a check for string list properties with compatible being the first
check.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add a string property check for 'label' property. 'label' is a human
readable string typically used to identify connectors or ports on devices.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This adds some simple tests for the checks of correctly formatted PCI
bridge nodes. Doesn't test all that much, but it's a start.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add a single test makeing sure the &foo { }; syntax works.
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add a check for nodes with interrupts property that they have a valid
parent, the parent has #interrupt-cells property, and the size is a
valid multiple of #interrupt-cells.
This may not handle every possible case and doesn't deal with
translation thru interrupt-map properties, but should be enough for
modern dts files.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The GPIO binding is different compared to other phandle plus args
properties in that the property name has a variable, optional prefix.
The format of the property name is [<name>-]gpio{s} where <name> can
be any legal property string. Therefore, custom matching of property
names is needed, but the common check_property_phandle_args() function
can still be used.
It's possible that there are property names matching which are not GPIO
binding specifiers. There's only been one case found in testing which is
"[<vendor>,]nr-gpio{s}". This property has been blacklisted and the same
should be done to any others we find. This check will prevent getting
any more of these, too.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Many common bindings follow the same pattern of client properties
containing a phandle and N arg cells where N is defined in the provider
with a '#<specifier>-cells' property such as:
intc0: interrupt-controller@0 {
#interrupt-cells = <3>;
};
intc1: interrupt-controller@1 {
#interrupt-cells = <2>;
};
node {
interrupts-extended = <&intc0 1 2 3>, <&intc1 4 5>;
};
Add checks for properties following this pattern.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
