This patch allows the following construct:
/ {
property-a = "old";
property-b = "does not change";
};
/ {
property-a = "changed";
property-c = "new";
node-a {
};
};
Where the later device tree overrides the properties found in the
earlier tree. This is useful for laying down a template device tree
in an include file and modifying it for a specific board without having
to clone the entire tree.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
At present, both the grammar and our internal data structures mean
that there can be only one label on a node or property. This is a
fairly arbitrary constraint, given that any number of value labels can
appear at the same point, and that in C you can have any number of
labels on the same statement.
This is pretty much a non-issue now, but it may become important with
some of the extensions that Grant and I have in mind. It's not that
hard to change, so this patch does so, allowing an arbitrary number of
labels on any given node or property. As usual a testcase is added
too.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Currently, when in -Idts -Odtb or -Ifs -Odtb modes, dtc always
defaults to using 0 as the value for the boot_cpuid_phys header field.
That's correct quite often, but there are some systems where there is
no CPU with hardware ID of 0, or where we don't want to use the CPU
with hardware ID 0 at all (e.g. for AMP-style partitioning). The only
way to override this default currently, is with the -b command line
option.
This patch improves dtc to instead base the default boot_cpuid_phys
value on the reg property of the first listed subnode of /cpus. This
means that dtc will get boot_cpuid_phys correct by default in a
greater proportion of cases (since the boot cpu is usually listed
first, and this way at least the boot_cpuid_phys default will match
some existing cpu node). If the node doesn't exist or has an invalid
'reg' property (missing or not 4 bytes in length), then
boot_cpuid_phys is set to 0.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This mod allows successful build of dtc using both bison/flex and yacc/lex.
Signed-off-by: Lukasz Wojcik <zbr@semihalf.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
This patch cleans up our handling of input files, particularly dts
source files, but also (to an extent) other input files such as those
used by /incbin/ and those used in -I dtb and -I fs modes.
We eliminate the current clunky mechanism which combines search paths
(which we don't actually use at present) with the open relative to
current source file behaviour, which we do.
Instead there's a single srcfile_relative_open() entry point for
callers which opens a new input file relative to the current source
file (which the srcpos code tracks internally). It doesn't currently
do search paths, but we can add that later without messing with the
callers, by drawing the search path from a global (which makes sense
anyway, rather than shuffling it around the rest of the processing
code).
That suffices for non-dts input files. For the actual dts files,
srcfile_push() and srcfile_pop() wrappers open the file while also
keeping track of it as the current source file for future opens.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
yylloc is the correct way to get token positioning information.
yyloc is a bison internal variable that only works by accident.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that all in-kernel-tree DTS files are properly /dts-v1/,
remove direct support for the older, un-numbered DTS
source file format.
Convert existing tests to /dts-v1/ and remove support
for the conversion tests themselves.
For now, though, the conversion tool still exists.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Implemented some print and copy routines.
Made empty srcpos objects that will be used later.
Protected .h file from multiple #include's.
Added srcpos_error() and srcpos_warn().
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Currently, dtc defines Linux-like names for various fixed-size integer
types. There's no good reason to do this; even Linux itself doesn't
use these names for externally visible things any more. This patch
replaces these with the C99 standardized type names from stdint.h.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
On Wed, Jun 04, 2008 at 09:26:23AM -0500, Jon Loeliger wrote:
> David Gibson wrote:
>
>> But as I said that can be dealt with in the future without breaking
>> compatibility. Objection withdrawn.
>>
>
> And on that note, I officially implore Scott to
> re-submit his binary include patch!
Scott's original patch does still have some implementation details I
didn't like. So in the interests of saving time, I've addressed some
of those, added a testcase, and and now resubmitting my revised
version of Scott's patch.
dtc: Add support for binary includes.
A property's data can be populated with a file's contents
as follows:
node {
prop = /incbin/("path/to/data");
};
A subset of a file can be included by passing start and size parameters.
For example, to include bytes 8 through 23:
node {
prop = /incbin/("path/to/data", 8, 16);
};
As with /include/, non-absolute paths are looked for in the directory
of the source file that includes them.
Implementation revised, and a testcase added by David Gibson
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Scott Wood <scottwood@freescale.com>
Currently, dtc will put the nonsense value 0xfeedbeef into the
boot_cpuid_phys field of an output blob, unless explicitly given
another value with the -b command line option. As well as being a
totally unuseful default value, this also means that dtc won't
properly preserve the boot_cpuid_phys field in -I dtb -O dtb mode.
This patch reworks things to improve the boot_cpuid handling. The new
semantics are that the output's boot_cpuid_phys value is:
the value given on the command line if -b is used
otherwise
the value from the input, if in -I dtb mode
otherwise
0
Implementation-wise we do the following:
- boot_cpuid_phys is added to struct boot_info, so that
structure now contains all of the blob's semantic information.
- dt_to_blob() and dt_to_asm() output the cpuid given in
boot_info
- dt_from_blob() fills in boot_info based on the input blob
- The other dt_from_*() functions just record 0, but we can
change this easily if e.g. we invent a way of specifying the boot cpu
in the source format.
- main() overrides the cpuid in the boot_info between input
and output if -b is given
We add some testcases to check this new behaviour.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Previously, only failure to parse caused the reading of the tree to fail;
semantic errors that called yyerror() but not YYERROR only emitted a message,
without signalling make to stop the build.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Looking in the diretory dtc is invoked from is not very useful behavior.
As part of the code reorganization to implement this, I removed the
uniquifying of name storage -- it seemed a rather dubious optimization
given likely usage, and some aspects of it would have been mildly awkward
to integrate with the new code.
Signed-off-by: Scott Wood <scottwood@freescale.com>
This patch extends dtc syntax to allow references (&label, or
&{/full/path}) directly within property definitions, rather than
inside a cell list. Such references are expanded to the full path of
the referenced node, as a string, instead of to a phandle as
references within cell lists are evaluated.
A testcase is also included.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
On several occasions, I've accidentally put properties after subnodes
in a dts file. I've then spent ages thinking that the resulting
syntax error was because of something else.
This patch arranges for this specific syntax error to generate a more
specific and useful error message.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently, every 'data' object, used to represent property values, has
two lists of fixup structures - one for labels and one for references.
Sometimes we want to look at them separately, but other times we need
to consider both types of fixup.
I'm planning to implement string references, where a full path rather
than a phandle is substituted into a property value. Adding yet
another list of fixups for that would start to get silly. So, this
patch merges the "refs" and "labels" lists into a single list of
"markers", each of which has a type field indicating if it represents
a label or a phandle reference. String references or any other new
type of in-data marker will then just need a new type value - merging
data blocks and other common manipulations will just work.
While I was at it I made some cleanups to the handling of fixups which
simplify things further.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
dtc: Switch dtc to C-style literals
This patch introduces a new version of dts file, distinguished from
older files by starting with the special token /dts-v1/. dts files in
the new version take C-style literals instead of the old bare hex or
OF-style base notation. In addition, the "range" for of memreserve entries
(/memreserve/ f0000-fffff) is no longer recognized in the new format.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
The current scheme of having CELLDATA and MEMRESERVE states to
recognize hex literals instead of node or property names is
arse-backwards. The patch switches things around so that literals are
lexed in normal states, and property/node names are only recognized in
the special PROPNODENAME state, which is only entered after a { or a
;, and is left as soon as we scan a property/node name or a keyword.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
At present, defining a property as, say:
foo = [abcd], <ffffffff>;
Will cause dtc to insert 2 bytes of zeros between the abcd and the
ffffffff, to align the cell form data.
Doing so seemed like a good idea at the time, but I don't believe
there are any users who actually rely on this behaviour. Segher
claims that OF has some defined bindings which include properties an
unaligned subsection of which is interpreted as 32-bit ints (i.e. like
cell data).
Worse, this alignment will cause nothing but pain when we add
expression support to dtc (when celldata is included in a larger
bytestring expession, we won't know the size of the preceding chunk of
the expression until it's evaluated, so we would have to carry
alignment fixup information right through the expression evaluation
process).
Therefore, this patch kills off this alignment behaviour.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Previously, there were a few shift/reduce and reduce/reduce
errors in the grammar that were being handled by the not-so-popular
GLR Parser technique.
Flip a right-recursive stack-abusing rule into a left-recursive
stack-friendly rule and clear up three messes in one shot: No more
conflicts, no need for the GLR parser, and friendlier stackness.
Compensate by reversing the property list on the node.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
I like to see the basis cases established early in
the rule sets, so place "empty" reduction first.
Purely cosmetic.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
This large patch removes all trailing whitespace from dtc (including
libfdt, the testsuite and documentation). It also removes a handful
of redundant blank lines (at the end of functions, or when there are
two blank lines together for no particular reason).
As well as anything else, this means that quilt won't whinge when I go
to convert the whole of libfdt into a patch to apply to the kernel.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Extend the parser grammer to allow labels before or after any
property data (string, cell list, or byte list), and any
byte or cell within the property data.
Store the labels using the same linked list structure as node
references, but using a parallel list.
When writing assembly output emit global labels as offsets from
the start of the definition of the data.
Note that the alignment for a cell list is done as part of the
opening < delimiter, not the = or , before it. To label a cell
after a string or byte list put the label inside the cell list.
For example,
prop = zero: [ aa bb ], two: < four: 1234 > eight: ;
will produce labels with offsets 0, 2, 4, and 8 bytes from
the beginning of the data for property prop.
Signed-off-by: Milton Miller <miltonm@bga.com>
Allow a label to be placed on a memory reserve entry.
Change the parser to recognize and store them. Emit
them when writing assembly output.
Signed-off-by: Milton Miller <miltonm@bga.com>
Check that strtoul() parsed the complete string.
As with the number overflow case, write a non-fatal error
message to stdout.
Signed-off-by: Milton Miller <miltonm@bga.com>
Keeps track of open files in a stack, and assigns
a filenum to source positions for each lexical token.
Modified error reporting to show source file as well.
No policy on file directory basis has been decided.
Still handles stdin.
Tested on all arch/powerpc/boot/dts DTS files
Signed-off-by: Jon Loeliger <jdl@freescale.com>
New syntax d#, b#, o# and h# allow for an explicit prefix
on cell values to specify their base. Eg: <d# 123>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
At present each property definition in a dts file must give as the
value either a string ("abc..."), a bytestring ([12abcd...]) or a cell
list (<1 2 3 ...>). This patch allows a property value to be given as
several of these, comma-separated. The final property value is just
the components appended together. So a property could have a list of
cells followed by a string, or a bytestring followed by some cells.
Cells are always aligned, so if cells are given following a string or
bytestring which is not a multiple of 4 bytes long, zero bytes are
inserted to align the following cells.
The primary motivation for this feature, however, is to allow defining
a property as a list of several strings. This is what's needed for
defining OF 'compatible' properties, and is less ugly and fiddly than
using embedded \0s in the strings.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
