If fdt_getprop() fails, negative error code should be returned.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If fdt_getprop() fails, negative error code should be returned.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Rename the blobs to have a more explicit output that will give us a clearer
idea about whether a DT (and the test) has been compiled using a dtc with
our without overlays support.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The compiled blobs in the overlay tests do not have the test suffix which
is usually used to clean up and ignore the test artifacts.
Let's add that suffix.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
fdt_overlay_apply was not usable in the shared library. Export it to allow
its use.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There's one FDT_ERR_BADOVERLAY too many in the fdt error table.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The bad fixups tests were meant to be usable even for a non-overlay-enabled
dtc.
Move them out of that check.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Some base device tree might not have any __symbols__ nodes, since they
might not have any phandle at all.
Similarly, if an overlay doesn't use any base device tree phandles, its
__fixups__ node will be empty.
In such cases, we don't want to stop the phandle parsing, but rather just
ignore the error reported about the missing node.
If it's actually an issue for the overlay we're trying to apply on a given
base device tree, it will be caught later on, but we cannot make the
assumption that early in the application process.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The __local_fixups__ node as a structure that mimics the structure of the
main overlay part.
This means that if we have a child node somewhere in the local fixups
sub-tree and if that node is not present in the main tree, the overlay is
poorly formatted, and we should report it as such.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The BADPHANDLE error was missing a string, leading to an <unknown error>
string being returned if you were to call fdt_strerror.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Using 'index' as a local variable name shadows the standard library index()
function. This causes warnings on at least some compiler versions. The
recently added overlay code has a number of instances of this.
This patch replaces 'index' with 'poffset', since 'index' is being used to
mean "offset within a property value" in these cases.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add some test infrastructure to test that the overlay can be merged, but
also that poorly formatted fixups would fail as expected.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
[dwg: Don't execute bad overlay tests without overlay aware dtc]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The device tree overlays are a good way to deal with user-modifyable
boards or boards with some kind of an expansion mechanism where we can
easily plug new board in (like the BBB, the Raspberry Pi or the CHIP).
Add a new function to merge overlays with a base device tree.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
So far, the BADPHANDLE error was only used for incorrect phandle values.
Extend that meaning to an improperly formatted phandle property.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add a few new error codes to report the failure conditions we might
encounter in the overlay application code:
- FDT_ERR_BADOVERLAY, when an overlay cannot be parsed, even though its
structure is correct
- FDT_ERR_NOPHANDLES, when we ran out of available phandles and we
cannot use a new phandle without either using an invalid one (-1 or
0), or one already used.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The supposed home page hasn't existed for some time. We don't really have
anything else, so remove the link from the README.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Correct some typos discovered with the codespell utility.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Boring release. This has a few bugfixes, and most importantly, it
includes a number of symbols in version.lds which should have been
exported all along, but were left out previously.
-----BEGIN PGP SIGNATURE-----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=/ZUB
-----END PGP SIGNATURE-----
Merge tag 'v1.4.2'
Fix a mistake where the v1.4.2 release tag wasn't actually merged to master.
We just added the -a option to allow padding of the output dtb's size to
a specified alignment. Unfortunately the test cases for this had several
bugs:
* Didn't actually test anything since "alignbase" instead of $alignbase
was passed to the checker function
* Introduced an unnecessary run_local_test wrapper
* Didn't provide very helpful output on failure
* Only attempted to check one alignment value
This patch fixes up these problems.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There is one condition that need cat the dtb files
into one dtb.img which can support several boards
use same SoC platform.
And the original dtb file size is not aligned to any base.
This may cause "Synchronous Abort" when load from a unligned
address on some SoC machine, such as ARM.
So this patch implement the -a <aligned number> option to
pad zero at the end of dtb files and make the dtb size aligned
to <aligned number>.
Then, the aligned dtbs can cat together and load without "Synchronous
Abort".
Signed-off-by: Tim Wang <timwang@asrmicro.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This has some fixes to the make dist target, and a new make kup target for
maintainer convenience uploading new releases.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The variable "err" is unneeded.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add a function to modify inplace only a portion of a property..
This is especially useful when the property is an array of values, and you
want to update one of them without changing the DT size.
Acked-by: Simon Glass <sjg@chromium.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
[dwg: Remove unnecessary unsigned qualifier, correct a comment]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add a function to retrieve a writeable property only by the first
characters of its name.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add a function to retrieve the highest phandle in a given device tree.
Acked-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Implement a macro based on fdt_first_property_offset and
fdt_next_property_offset that provides a convenience to iterate over all
the properties of a given node.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Simon Glass <sjg@chromium.org>
[dwg: Removed a stray trailing blank line]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The fdt_for_each_subnode() iterator macro provided by this patch can be
used to iterate over a device tree node's subnodes. At each iteration a
loop variable will be set to the next subnode.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
CID 132821 (#1 of 1): Resource leak (RESOURCE_LEAK)
12. leaked_storage: Variable value going out of scope leaks the storage it points to.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
CID 132823 (#1 of 1): Resource leak (RESOURCE_LEAK)
5. leaked_storage: Variable blob going out of scope leaks the storage it points to.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
CID 132822 (#1 of 1): Resource leak (RESOURCE_LEAK)
9. leaked_storage: Variable newname going out of scope leaks the storage it points to
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
[dwg: Removed unnecessary hunk]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
CID 132817 (#1 of 1): Integer overflowed argument (INTEGER_OVERFLOW)
15. overflow_sink: Overflowed or truncated value (or a value computed from an overflowed or truncated value) endp - p - 4L used as critical argument to function.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If flatname was not referenced by the "node" structure, the reference to the
allocated string is lost at function exit.
We need to free it if is not used by "node".
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Property checking functions aren't particularly useful. They're used only
in a handful of cases, and most of those really only check a small handful
of specific properties. This patches converts the few cases to node check
functions and removes property check functions entirely.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The tree check functions from the checking infrastructure aren't very
useful. There were only two examples using them, and they're basically
equivalent to a node check which is applied only to the root node, so those
are easily replaced.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch allows dtc to accept multiple /dts-v1/ tags (provided they're
all at the beginning of the input), rather than giving a syntax error.
This makes it more convenient to include one .dts file from another without
having to be careful that the /dts-v1/ tag is in exactly one of them.
We a couple of existing testcases to take advantage of this, which
simplifies them slightly.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that we have an xasprintf() helper function, use it to simplify the
srcpos_string() implementation.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Include a portable asprintf variant that works on any C99
conforming platform.
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The code style here is slightly incorrect. Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There are a few lines that are over 80 columns. Fix these.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There are a few places with a space before a tab in this file. Fix them.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Because fdt_stringlist_contains() returns 1 or 0,
fdt_node_check_compatible() can just return the inverted value.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ePAPR 1.1 section 2.2.1.1 "Node Name Requirements" specifies that any
node that has a reg property must include a unit address in its name
with value matching the first entry in its reg property. Conversely, if
a node does not have a reg property, the node name must not include a
unit address. Also allow ranges property as it is deemed valid, but ePAPR
is not clear about it.
Implement a check for this. The code doesn't validate the format of the
unit address; ePAPR implies this may vary from (containing bus) binding
to binding, so doing so would be much more complex.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
[robh: also allow non-empty ranges]
Signed-off-by: Rob Herring <robh@kernel.org>
[moved new test in check_table]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We have a couple of checks of the form:
if (offset+size > totalsize)
die();
We need to check that offset+size doesn't overflow, otherwise the check
will pass, and we may access past totalsize.
Found with AFL.
Signed-off-by: Anton Blanchard <anton@samba.org>
[Added a testcase]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
1937095 "Prevent crash on division by zero" fixed a crash when attempting
a division by zero using the / operator in a dts. However, it missed the
precisely equivalent crash with the % (modulus) operator. This patch fixes
the oversight.
Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In order to work with preprocessed dts files more easily, dts will parse
line number information in the form emitted by cpp.
Anton Blanchard (using a fuzzer) reported that including a line number
directive with a nul character (a literal nul in the input file, not a \0
sequence) would cause dtc to SEGV. I spotted several more problems on
examining the code:
* It modified yytext in place which seems to work, but is ugly and I'm
not sure if it's safe on all lex/flex versions
* The regexp used in the lexer to recognize line number information
accepts strings with escape characters, but it won't process these
escapes.
- GNU cpp at least, will generate \ escapes in line number
information, at least with files containing " or \ in the name
This patch reworks the handling of line number information to address
these problems. \ escapes should now be handled directly. nuls in file
names (either with a literal nul in the input file, or with a \0 escape
sequence) are still not permitted, but will now result in a lexical error
rather than a SEGV.
Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If a dts file contains a string with \ followed by a nul byte - an actual
nul in the input file, not the \\0 escape - then the assert() in
get_escape_char() will trip, crashing dtc.
As far as I can tell, there isn't any valid need for this assert(), so just
remove it.
Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The code handling integer literals in dtc-lexer.l assumes that the flex
regexp means that strtoull() can't fail to interpret the string as a valid
integer (either decimal, octal, or hexadecimal). This is not true for
octals. For example '09' is accepted as a literal by the regexp,
strtoull() attempts to handle it as octal, but it has a bad digit.
This changes the code to give a more useful error in this case.
Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
