`fixfiles -M relabel` temporary bind mounts file systems before
relabeling, but it left the / directory mounted in /tmp/tmp.XXXX when a
user hit CTRL-C. It means that if the user run `fixfiles -M relabel`
again and answered Y to clean out /tmp directory, it would remove all
data from mounted fs.
This patch changes the location where `fixfiles` mounts fs to /run, uses
private mount namespace via unshare and adds a handler for exit signals
which tries to umount fs mounted by `fixfiles`.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2125355
Signed-off-by: Petr Lautrbach <plautrba@redhat.com>
Tested-by: Christian Göttsche <cgzones@googlemail.com>
Acked-by: James Carter <jwcart2@gmail.com>
Commit 93902fc834 ("setfiles/restorecon: support parallel relabeling")
implemented support for parallel relabeling in setfiles. This is
available for fixfiles now.
Signed-off-by: Petr Lautrbach <plautrba@redhat.com>
Acked-by: Ondrej Mosnacek <omosnace@redhat.com>
I can't think of a good reason why they should be excluded. On the
contrary, excluding them can cause trouble very easily if some labeling
rules for these directories change. For example, we changed the label
for /dev/nvme* from nvme_device_t to fixed_disk_device_t in Fedora
(updating the allow rules accordingly) and after policy update they
ended up with an invalid context, causing denials.
Thus, remove /dev and /run from the excludes. While there, also add
/root to the basic excludes to match the regex that excludes fc rules
(that should be effectively no functional change).
I did a sanity check on my system by running `restorecon -nv /dev /run`
and it didn't report any label differences.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Petr Lautrbach <plautrba@redhat.com>
Mention the supported file systems ext4, gfs2 and btrfs.
The options check and verify are interchangeable, merge their
description.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Acked-by: Petr Lautrbach <plautrba@redhat.com>
By bind mounting every filesystem we want to relabel we can access all
files without anything hidden due to active mounts.
This comes at the cost of user experience, because setfiles only
displays the percentage if no path is given or the path is /
Signed-off-by: Jonathan Hettwer <j2468h@gmail.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
The previous check used getfilecon to check whether / slash contains a label,
but getfilecon fails only when SELinux is disabled. Therefore it's better to
check this using selinuxenabled.
Signed-off-by: Petr Lautrbach <plautrba@redhat.com>
Commit 6e289bb7bf ("policycoreutils: fixfiles: remove bad modes of "relabel"
command") added "$RESTORE_MODE" != DEFAULT test when onboot is used. It makes
`fixfiles -B onboot` to show usage instead of updating /.autorelabel
The code is restructured to handle -B for different modes correctly.
Fixes:
# fixfiles -B onboot
Usage: /usr/sbin/fixfiles [-v] [-F] [-f] relabel
...
Signed-off-by: Petr Lautrbach <plautrba@redhat.com>
"restorecon -n" (used in the "restore" function) has to be used with
"-v" to display the files whose labels would be changed.
Fixes:
Fixfiles verify does not report misslabelled files unless "-v" option is
used.
Signed-off-by: Vit Mojzis <vmojzis@redhat.com>
Use codespell (https://github.com/codespell-project/codespell) in order
to find many common misspellings that are present in English texts.
Signed-off-by: Nicolas Iooss <nicolas.iooss@m4x.org>
Fix the following ambiguous output (from booting with init=/bin/sh):
# /usr/sbin/fixfiles onboot
/usr/sbin/fixfiles: line 313: /.autorelabel: Read-only file system
/usr/sbin/fixfiles: line 317: /.autorelabel: Read-only file system
System will relabel on next boot
System will not relabel on next boot if we couldn't create ./autorelabel
(In case anyone reading this description is still confused: To run
`fixfiles onboot` after booting with init=/bin/sh, you must first run
`mount / -oremount,rw`).
As reported by Nicolas Iooss, there are still some inconsistencies
in the definitions and usage of Makefile variables related to bin
and sbin directories. Since we need to still support non-usrmerge
systems, we cannot completely synchronize them, but we can eliminate
unnecessary differences, remove unused variables, and drop the
USRSBINDIR variables.
Before:
$ find . -name Makefile -exec cat {} + |grep '^[A-Z_]*BINDIR' |sort -u
BINDIR=$(PREFIX)/bin
BINDIR ?= $(PREFIX)/bin
BINDIR ?= $(PREFIX)/sbin
SBINDIR ?= $(DESTDIR)/sbin
SBINDIR ?= $(PREFIX)/sbin
USRSBINDIR ?= $(PREFIX)/sbin
After:
$ find . -name Makefile -exec cat {} + | grep '^[A-Z_]*BINDIR' | sort -u
BINDIR ?= $(PREFIX)/bin
SBINDIR ?= $(DESTDIR)/sbin
SBINDIR ?= $(PREFIX)/sbin
This does not change the actual install location of any file.
It does drop the legacy symlink from /usr/sbin/load_policy to
/sbin/load_policy; packagers can create that separately if
desired.
Reported-by: Nicolas Iooss <nicolas.iooss@m4x.org>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Files in /tmp, /var/tmp, /var/run and /var/lib/debug labeled as
unlabeled_t or undefined_t are relabeled to match corresponding
directory label. Stop dereferencing link files in these folders
in order not to accidentally change label of other files in the
system.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1458831
Signed-off-by: Vit Mojzis <vmojzis@redhat.com>
* `fixfiles -B relabel` or `fixfiles -C previouscontext relabel` would
skip the code that handles e.g. `/var/tmp`, which would be run by
`fixfiles relabel`. It would still remove all files in /tmp (subject to
user confirmation). This is confusing, undocumented, and unlikely to
be intentional.
* `fixfiles relabel path1 path2` is the same, except it would only relabel
the first path.
* `fixfiles -R ... relabel` was equivalent to `fixfiles -R ... restore`,
again contradicting the man page.
Also `fixfiles onboot` would ignore paths, -C, or -R.
fixfiles is mostly for users, where it should be acceptable to remove these
non-sensical combinations.
`fixfiles -C` is used in selinux-policy rpm install scripts. However I
believe the rpms used `fixfiles -C previouscontext restore`, and did not
either require user interaction or blow away /tmp without prompting. So
they should still work fine.
With these combinations removed, we can remove the `exit` calls which were
seen in some of the (non-error) code paths in `restore()`.
Signed-off-by: Alan Jenkins <alan.christopher.jenkins@gmail.com>
`fixfiles -R -a` is much less useful than it was made to sound, because -R
now works recursively. Therefore `fixfiles -R -a` relabels every file on
the system, multiple times. On my system it took over 5 times as long as
plain `fixfiles` (which takes about a minute).
Signed-off-by: Alan Jenkins <alan.christopher.jenkins@gmail.com>
This commit allows the use of `set -u` to detect reads of unset variables.
But what I really liked was making the code more explicit about these
modes. I hope that this is easier for a new reader to reason about.
`fixfiles restore` has accumulated five different modes it can run in.
Now use a single variable to indicate the mode, out-of-band of the
variables used for the individual modes.
Apparently `set -u` / `set -o nounset` doesn't work correctly with arrays.
If we ever need bash arrays, we can simply remove `set -u`. The `set -u`
dialect is a strict subset. See http://mywiki.wooledge.org/BashFAQ/112
Extra notes:
RESTORE_MODE was created because I couldn't bring myself to use an empty
FILEPATH, as a special case to indicate the default mode. Arguments
to the script (paths) could be empty already, so it would mean I had to
work out how we behaved in that case and decide whether it was reasonable.
It turns out the `-B | -N time` mode is distinct and does not respect
paths. So we can tell the user we're not going to do anything with the
paths they passed. Make sure this distinction is shown in the usage error
message.
We already rejected the combination of `-R rpmpackage,... dir/file...`.
Being aware of the different modes just causes more bogus combinations
to be rejected.
Signed-off-by: Alan Jenkins <alan.christopher.jenkins@gmail.com>
New users may try something like `fixfiles restore -v /dir/file` -
not realizing they are required to use `fixfiles -v restore /dir/file`.
Detect that `restorecon` aborts due to being run on the non-existent file
`-v`, and stop immediately. This will show the error much more clearly,
instead of continuing to restore `/dir/file` *without* verbose messages.
Signed-off-by: Alan Jenkins <alan.christopher.jenkins@gmail.com>
The idea is to print a usage error, then terminate with EXIT_FAILURE.
Don't print the usage error twice when run with no command.
Don't try to check for bogus extra arguments _after_
performing a long-running operation... particularly
if that operation terminates the script with EXIT_SUCCESS first.
Signed-off-by: Alan Jenkins <alan.christopher.jenkins@gmail.com>
$ shellcheck fixfiles
...
In fixfiles line 94:
[[ "${i}" =~ "^[[:blank:]]*#" ]] && continue
^-- SC2076: Don't quote rhs of =~, it'll match
literally rather than as a regex.
Signed-off-by: Alan Jenkins <alan.christopher.jenkins@gmail.com>
DIRS was suspicious because you can't store file names in a normal variable,
and it's not that common to use arrays in bash. It's not actually used.
While we're here, there's another variable which is never used
and should just be removed. (Pointed out by `shellcheck`.
It makes a couple of other points too, but I have more specific
patches I want to put those in).
Signed-off-by: Alan Jenkins <alan.christopher.jenkins@gmail.com>
Make sure usage() in fixfiles shows all the current options.
It's printed when there's a user error, so it needs to be
helpful! (Excluding the deprecated option - see below).
manpage:
Remove the deprecated option `-l logfile`.
Add missing space in `restore|[-f] relabel`.
It's not clear why `-R rpmpackagename` was considered optional in the
second invocation. (If the user omits it, they are just performing the
first invocation). It desn't match usage() in fixfiles either.
Clean up bolding for `fixfiles onboot`.
Disable justification (troff "adjustment") in the synopsis. We want the
common options in the different invocations to line up consistently.
Signed-off-by: Alan Jenkins <alan.christopher.jenkins@gmail.com>
...and write log messages to standard output.
Some versions of fixfiles in 2004 created a logfile by default.
Apparently they also used `tee` to log to standard output at the same time.
We're also told that the logfile was implemented because there was too
much output generated for use on a tty, and it scrolled out of reach.
https://bugzilla.redhat.com/show_bug.cgi?id=131707
In the current version, none of these original reasons for `-l` remain.
The logfile is not created by default. If no log file is specified,
messages are written to stdin [sic]... if and only stdin is a tty. If
stdin is not a tty, the log defaults to /dev/null.
When a user runs fixfiles on a tty and finds there is too much output, she
is likely to try redirecting standard output and/or standard error using
the shell. She will find this doesn't help, because fixfiles is writing
the verbose log messages to standard input.
I tried to fix the problem non-intrusively, by changing the default log
file to `/dev/stdout`. Sadly, this breaks down where you have
`echo >>$LOGFILE "Log message"` inside a specific function, which is run
with output redirected in order to "return" a string value (captured
into a variable). exclude_dirs_from_relabelling() was such a function.
I was trying to abstract over writing to both normal files and stdout, but
my abstraction "leaks" in a non-obvious way.
There is a simple solution. We can write the log messages to standard
output. When we are passed `-l` by a legacy script, we can redirect
standard output to the logfile.
This removes any distinctions between the logfile and "non-log" messages.
Some calls to restorecon were missing redirections to the log file.
"Cleaning out /tmp" was written to the log file, but "Cleaning out labels
on /tmp" was not. There were no comments to explain these distinctions.
Move call to logit() outside a function which has its output redirected.
See next commit for explanation.
The logit calls are moved into a new function LogExcluded(), similar to
LogReadOnly(). I don't see a pretty way to resolve this, so I just went
for the most explicit approach I could think of.
Behaviour change: diff_filecontext will now log *all* excluded paths.
I think that approach is an improvement, because e.g. the fact that `-C`
mode excludes `/home` was not previouslly documented anywhere.
The LogReadOnly() call which warns the user about R/O filesystems, applies
to the `-B` mode (newer() function), and the `fixfiles check` mode
(no paths).
Make sure to print it for these modes, and these modes only.
The usage of exclude_dirs() is non-obvious.
It turns out it is only used by the `-C` mode of fixfiles. The other four
modes use the narrower list generated by exclude_dirs_from_relabelling().
Let's make this distinction more obvious.
(The purpose of the extra exclusions is not clear. E.g. there's an
exclusion for /dev. Whereas the `fixfiles check` mode explicitly tells you
that it's going to relabel /dev, without causing any problem. Maybe that
part is out of date? But without some explanation of the list, I don't
want to change anything!)
setfiles is now run with $exclude_dirs.
We shouldn't need to patch the file contexts as well.
This is fortunate, since the file context patching code was broken
(by the same commit which introduced the redundancy). It takes the
list of directories to exclude from $tempdirs, but $tempdirs is
never set.
Also messages about skipping directories were printed twice. Firstly when
exclude_dirs is generated, and secondly in the file context patching code.
Also TEMPFCFILE was only removed in one path out of several.
This reverts commit ac7899fc3a,
which is not yet part of an officially tagged release
(or release candidate).
`LOGFILE=/proc/self/fd/1` was wrong.
`LOGFILE=$(tty)` was being relied on in one case (exclude_dirs),
to log messages from a function run specifically with stdout redirected
(captured into a variable).
Having `logit "message"` break inside redirected functions
is a nasty leaky abstraction.
This caused e.g. `fixfiles restore` to terminate early with the error
skipping: No such file or directory
if the user had configured any excluded paths in
/etc/selinux/fixfiles_exclude_dirs
Don't force output through a pipe - let them access the TTY.
When run interactively, this acts as a workaround for
"Output of fixfiles gets garbled?"
https://bugzilla.redhat.com/show_bug.cgi?id=1435894
E.g. it would also be useful if restorecon ever decides it doesn't want to
output backspace characters on non-TTY outputs.
Signed-off-by: Alan Jenkins <alan.christopher.jenkins@gmail.com>
I accidently ran `fixfiles "a b"` during testing. Let's fix this too.
Before:
/sbin/fixfiles: line 394: [: a: binary operator expected
Usage: ...
After:
Usage: ...
Signed-off-by: Alan Jenkins <alan.christopher.jenkins@gmail.com>
E.g. `fixfiles restore -v /usr` - before:
Warning: Skipping the following R/O filesystems:
/sys/fs/cgroup
Progress and Verbose mutually exclusive
usage: /sbin/restorecon [-iFnprRv0] [-e excludedir] pathname...
usage: /sbin/restorecon [-iFnprRv0] [-e excludedir] -f filename
Warning: Skipping the following R/O filesystems:
/sys/fs/cgroup
229k
after:
Warning: Skipping the following R/O filesystems:
/sys/fs/cgroup
/sbin/restorecon: lstat(-v) failed: No such file or directory
Warning: Skipping the following R/O filesystems:
/sys/fs/cgroup
229k
This matches the usage shown in the manual page. While we're in there,
we should handle spaces as well e.g `fixfiles restore "a b"`. Before:
Warning: Skipping the following R/O filesystems:
/sys/fs/cgroup
/sbin/restorecon: lstat(b) failed: No such file or directory
After:
Warning: Skipping the following R/O filesystems:
/sys/fs/cgroup
/sbin/restorecon: lstat(a b) failed: No such file or directory
Signed-off-by: Alan Jenkins <alan.christopher.jenkins@gmail.com>
fixfiles was redirecting log output to `tty`. This overrides user intent
e.g. when shell redirection is used.
Redirect it to stdout, using /proc. `tty` equally depended on /proc.
We do not depend on /dev/stdout: it might not be present, if a rescue
system is booted with devtmpfs (no udev daemon).
By default, log messages were redirected into the void when not run from a
tty. We consider this a bug, which is now fixed.
1. If calling scripts happen to require the old behaviour, they can easily
write the same code themselves.
2. When fixfiles is run from Fedora's selinux-autorelabel.service,
the calling script is specifically run from a tty.
Also Fedora's calling script chooses to redirect stdout and stderr to
/dev/null. This redirection will now suceed, improving the transparency
of the code. The previous behaviour may be obtained by choosing not
to redirect the progress messages of this long-running process to
/dev/null. A patch has been submitted to Fedora to suggest this novel
approach: https://bugzilla.redhat.com/show_bug.cgi?id=1415674
Complete disclosure:
* Remove unused variable LOGGER.
* Fix logfiles containing spaces.
Disclaimer:
1. "Log" output may contain escape sequences (backspace?) e.g. in
`fixfiles -l log.txt restore`. This is not the usual understanding
of a log file.
2. For some reason, not all informative messages are sent to `-l` e.g.
the list of filesystems, and "cleaning up labels on /tmp".
3. `function logit` is retained, but the logfile is also written to
outside this function. Implementing support for the system log
would require another function which accepts piped input.
Also see point 1.
Signed-off-by: Alan Jenkins <alan.christopher.jenkins@gmail.com>
Fix missing and surplus commas. Fix the following formatting errors:
.BR selinux(8)
renders the the "(8)" in bold as well as the "selinux". This is wrong.
.B selinux
(8)
renders with a space between "selinux" and "(8)", this is wrong.
.B selinux (8)
commits both of the above mistakes.
.BR selinux (8), apparmor (8)
omits the space separating "selinux(8)," and "apparmor(8)", this is wrong.
Correct all the above using the following markup:
.BR selinux (8),
.BR apparmor (8)
Signed-off-by: Alan Jenkins <alan.christopher.jenkins@gmail.com>
-n was not being passed down to restorecon properly in the code path
for -C and -N
Patch-by: Dan Callaghan <dcallagh@redhat.com>
Signed-off-by: Petr Lautrbach <plautrba@redhat.com>
The commit 7574a50f tried to improve compatibility with Python 3. It changed
the code to use subprocess.getstatusoutput() instead of
commands.getstatusoutput(). Unfortunately subprocess.getstatusoutput() is not
available in Python 2. This patch changes how getstatusoutput() is imported so
the code works on Python 2 and Python 3.
Fixes:
$ chcat -d something
Traceback (most recent call last):
File "/usr/bin/chcat", line 432, in <module>
sys.exit(chcat_replace(["s0"], cmds, login_ind))
File "/usr/bin/chcat", line 271, in chcat_replace
rc = subprocess.getstatusoutput(cmd)
AttributeError: 'module' object has no attribute 'getstatusoutput'
Signed-off-by: Petr Lautrbach <plautrba@redhat.com>
Install gettext the same way everywhere and have fallbacks to use
str/unicode depending on python version.
Signed-off-by: James Carter <jwcart2@tycho.nsa.gov>
Some teminal emulators (like the latest version of gnome-terminal) are
not setting entries in the utmp file, this leads getlogin() to return an
empty string.
Fallback to the name of the user running the chcat process.
When trying to get policycoreutils working in python3, I kept running
into TabErrors:
Traceback (most recent call last):
File "/usr/lib/python-exec/python3.3/semanage", line 27, in <module>
import seobject
File "/usr/lib64/python3.3/site-packages/seobject.py", line 154
context = "%s%s" % (filler, raw)
^
TabError: inconsistent use of tabs and spaces in indentation
Python3 is a lot stricter than python2 regarding whitespace and looks like
previous commits mixed the two. When fixing this, I took the chance to fix
other PEP8 style issues at the same time.
This commit was made using:
$ file $(find . -type f) | grep -i python | sed 's/:.*$//' > pyfiles
$ autopep8 --in-place --ignore=E501,E265 $(cat pyfiles)
The ignore E501 is long lines since there are many that would be wrapped
otherwise, and E265 is block comments that start with ## instead of just #.
Signed-off-by: Jason Zaman <jason@perfinion.com>
- __builtin__ module has been renamed to "builtins" in Python 3
- use reserved word `as` in try-except
- replace print statement with print function
- migrate from commands to subprocess
- fix formatting
Signed-off-by: Michal Srb <msrb@redhat.com>
Fix check for seclabel flag.
Restorecon commands should always use FORCEFLAG command if passed in.
Found a bug in handling of regex difference
All restorecon commands should use the exclude file path call.
Only cleanup /tmp on a Full Relabel, not a Check.
Set BOOTIME flag in /.autorelabel file, so that we can only relabel
files created since this time. Should speed up relabel.
