- Create role declarations no matter if the declaration is in base or
a module. Since CIL does not permit role re-declarations, this change
will break existing policies that have the same role declared in multiple
modules. To fix this, the policies will need to change the role to be
defined in a single place.
- Pass around the avrule_decl stack rather than just the most recent
decl. The full stack is needed to determine if identifiers are in
scope
- Only create roletype statements for a role and a type in two cases:
1) The role is declared/required and the type is declared/required in
the same scope or an ancestor scope of the role
2) The type is declared/required and the role is declared/required in
an ancestor scope of the type
Signed-off-by: Yuli Khodorkovskiy <ykhodorkovskiy@tresys.com>
Acked-by: Steve Lawrence <slawrence@tresys.com>
This fixes the build with "make PYTHON=python2" on systems where python
is python3.
For PYLIBVER and PYTHONLIBDIR definitions, I tested Python 2.5, 2.6, 2.7,
3.3 and 3.4. For each of them, these commands print the expected result:
python -c 'import sys;print("python%d.%d" % sys.version_info[0:2])'"
python -c "from distutils.sysconfig import *;print(get_python_lib(1))"
Acked-by: Steve Lawrence <slawrence@tresys.com>
In C, defining a function with () means "any number of parameters", not
"no parameter". Use (void) instead where applicable and add unused
parameters when needed.
Acked-by: Steve Lawrence <slawrence@tresys.com>
log_err, cil_printf and cil_println use printf formats to process their
arguments. Use __attribute__((format(printf,...))) to make "gcc
-Wformat -Wformat-security" detect issues.
This detected this issue several times on a x86_64 system:
format '%lx' expects argument of type 'long unsigned int', but
argument has type 'uint32_t'
Fix this by introducing an explicit cast to unsigned long.
While at it, constify the format string argument of each function.
Acked-by: Steve Lawrence <slawrence@tresys.com>
Building from the root directory with "make DEBUG=1" enables -Wshadow
option. This makes the compilation fail with the following error:
semodule_unpackage.c: In function 'usage':
semodule_unpackage.c:17:25: error: declaration of 'progname' shadows a global declaration [-Werror=shadow]
static void usage(char *progname)
^
semodule_unpackage.c:14:7: error: shadowed declaration is here [-Werror=shadow]
char *progname = NULL;
^
Fix this error by no longer passing a global variable as a parameter to
usage function.
Acked-by: Steve Lawrence <slawrence@tresys.com>
Building from the root directory with "make DEBUG=1" enables -Wshadow
option. This makes the compilation fails with the following error:
cc -g3 -O0 -gdwarf-2 -fno-strict-aliasing -Wall -Wshadow -Werror -g
-I/usr/include -DPACKAGE="\"policycoreutils\"" -Wall -Werror -Wextra
-W -c -o seunshare.o seunshare.c
seunshare.c: In function 'spawn_command':
seunshare.c:141:6: error: declaration of 'child' shadows a global declaration [-Werror=shadow]
int child;
^
seunshare.c:58:12: error: shadowed declaration is here [-Werror=shadow]
static int child = 0;
^
Fix this error by renaming the "child" variable in spawn_command.
Acked-by: Steve Lawrence <slawrence@tresys.com>
"gcc -O2 -Wall -Werror" failed with two errors when building pp due to
the use of unitialized variables.
Acked-by: Steve Lawrence <slawrence@tresys.com>
mcstrans still uses CONTEXT__CONTAINS from av_permissions.h to calculate
a permission access vector. However, av_permissions.h was deprecated, so
it does not have access to the constant. This updates mcstrans to use
string_to_av_perm() to get the value for context contains.
Reported-by: Sven Vermeulen <sven.vermeulen@siphos.be>
Signed-off-by: Steve Lawrence <slawrence@tresys.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Add a new -S option to semodule. This option overrides store_root
in semanage.conf and sets the SELinux store's root path. If neither -S,
nor store_root are specified in semanage.conf, then the default
location is used.
Signed-off-by: Yuli Khodorkovskiy <ykhodorkovskiy@tresys.com>
Providing --ignore-module-cache will cause the recompilating of all HLL
modules, and recaching of the resulting CIL files.
Signed-off-by: Yuli Khodorkovskiy <ykhodorkovskiy@tresys.com>
Reads in a policy package file via stdin or via filename, and writes out
the equivilent CIL to stdout or to an output file, depending on the
parameters passed in.
Signed-off-by: Steve Lawrence <slawrence@tresys.com>
- Remove version references
- Use new methods for enabling/disabling modules
- Add support to set priority when adding/removing modules
- Modify module --list output to include priority and language extension
- Update permissiveRecords call to support cil policy
Signed-off-by: Steve Lawrence <slawrence@tresys.com>
Signed-off-by: Jason Dana <jdana@tresys.com>
Providing --upgrade or --base will now just call --install, and display
a deprecation message to the user. Additionally, because CIL has no
concept of version numbers, this removes the version output from --list.
Signed-off-by: Yuli Khodorkovskiy <ykhodorkovskiy@tresys.com>
This updates the semodule tool with the ability to set the priority for
commands, to enable/disable modules, and extended module listing options
for displaying extra module information (e.g., priority, enabled status,
and language extension).
[semodule priority]
-X --priority set the priority for following operations
Notes:
* This sets the priority for the following operations.
* It can be used any number of times with its effect continuing until
the next priority is specified.
* The default priority is used if no priority has yet been specified.
Impact on current operations:
* Install module
* Without priority - Install at default priority.
* With priority - Install at specified priority.
* New warning when overriding (issued by libsemanage).
* Upgrade module
* Without priority - Upgrade at default priority (current upgrade
semantics apply).
* With priority - Upgrade at specified priority (current upgrade
semantics apply).
* New warning when overriding (issued by libsemanage).
* Remove module
* Without priority - Remove a module at the default if exists.
* With priority - Remove at that priority.
* New info messages (issued by libsemanage):
* If no modules exist at the given priority but do exist at other
priorities, give an info message listing the modules and priority.
* If a new module at a lower priority will become active print a
message.
* If the last module with this name is being removed print a
message.
* Base
* The name of base module on install is fixed to "_base" (performed by
libsemanage).
* Without priority - Install at default priority.
* With priority - Install at specified priority.
* New warning when overriding (issued by libsemanage).
* List modules
* See listing changes below.
Examples:
semodule -i foo.pp
semodule -X 500 -i foo.pp
[semodule enable/disable]
Add enable/disable status:
-e --enable enable the module (at all priorities)
-d --disable disable the module (at all priorities)
Notes:
* Base modules are always enabled and cannot have their enabled/disabled
status changed.
* New error when disabling a base module (from libsemanage).
* New warning when enabling a base module (from libsemanage).
Impact on current operations:
* Install module
* If a module with that name is already installed, then the enabled
status will remain the same after installing the new module.
* New warning when installing a module which will be disabled by
existing enabled status (from libsemanage).
* Upgrade module
* If a module with that name is already installed, then the enabled
status will remain the same after installing the new module.
* New warning when installing a module which will be disabled by
existing enabled status (from libsemanage).
* Remove module
* When the last module with a given name is removed (no more exist at
other priorities) then the enabled status is forgotten.
* Base
* Base modules are always installed enabled and remain so (can't be
disabled).
* List modules
* See listing changes below.
Examples:
semodule -e foo
semodule -d foo
[semodule list]
-l --list list modules as if by -lstandard
-lstandard --list=standard list name and version of highest priority,
enabled, non-base modules sorted alphabetical
by name
-lfull --list=full list all fields of all modules columnated
sorted high priority to low, within priority
alphabetical by name
Impact on current operations:
* List modules
* Default listing stays the same.
* New long options for 'standard' and 'full'.
Examples:
semodule -l
semodule -lstandard
semodule --list=standard
alsa 1.7.1
apm 1.9.1
apt 1.5.2
authlogin 2.0.0
avahi 1.10.3
bluetooth 3.1.3
...
semodule -lfull
semodule --list=full
600 alsa 1.7.1 disabled pp
400 _base 1.0.0 pp
400 alsa 1.7.1 disabled pp
400 apm 1.9.1 pp
400 apt 1.5.2 pp
400 authlogin 2.0.0 pp
...
100 alsa 1.7.1 disabled pp
Signed-off-by: Chad Sellers <csellers@tresys.com>
semanage currently uses /var/lib/selinux/tmp to create permissive
modules. However, with the move to /var, the same tmp directory is used
for building policy binaries, causing a conflict. This patch creates a
random temporary directory in /tmp and moves permissive module creation
to that directory, avoiding the directory conflict.
This patch also imports shutil for rmtree to easily delete all created
temporary files.
Signed-off-by: Chad Sellers <csellers@tresys.com>
Also remove all internal uses by libselinux.
This requires deleting the old class/perm string lookup tables
and compatibility code for kernels that predate the /sys/fs/selinux/class
tree, i.e. Linux < 2.6.23.
This also fixes a longstanding bug in the stringrep code; it was allocating
NVECTORS (number of vectors in the legacy av_perm_to_string table, i.e.
the total number of legacy permissions) entries in the per-class perms array
rather than MAXVECTORS (the maximum number of permissions in any
access vector). Ho hum. I already fixed this in Android but forgot it
here.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
If seunshare uses PR_SET_NO_NEW_PRIVS, which certain versions of
libcap-ng set, setexeccon will cause execve to fail. This also
makes setting selinux context the very last action taken by
seunshare prior to exec, as it may otherwise cause things to fail.
Note that this won't work without adjusting the system policy to
allow this use of setcurrent. This rule appears to work:
allow unconfined_t sandbox_t:process dyntransition;
although a better rule would probably relax the unconfined_t
restriction.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Currently, the selevel/serange values (which are often set on a default
's0' value) are used for ports, users, contexts and logins. This breaks
non-MLS setups.
This patch will only call the necessary mls functions if mls is actually
enabled.
Signed-off-by: Sven Vermeulen <sven.vermeulen@siphos.be>
Sandbox policy is huge do to macro expansion. We do not install this by default
but sandbox command can fail without it installed. This patch prints a message to the
user to install the package.
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
