platform_hardware_interfaces/audio/2.0/IDevice.hal

/*
 * Copyright (C) 2016 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

package android.hardware.audio@2.0;

import android.hardware.audio.common@2.0;
import IStreamIn;
import IStreamOut;

interface IDevice {
    typedef android.hardware.audio@2.0::Result Result;

    /*
     * Returns whether the audio hardware interface has been initialized.
     *
     * @return retval OK on success, NOT_INITIALIZED on failure.
     */
    initCheck() generates (Result retval);

    /*
     * Sets the audio volume for all audio activities other than voice call. If
     * NOT_SUPPORTED is returned, the software mixer will emulate this
     * capability.
     *
     * @param volume 1.0f means unity, 0.0f is zero.
     * @return retval operation completion status.
     */
    setMasterVolume(float volume) generates (Result retval);

    /*
     * Get the current master volume value for the HAL, if the HAL supports
     * master volume control. For example, AudioFlinger will query this value
     * from the primary audio HAL when the service starts and use the value for
     * setting the initial master volume across all HALs. HALs which do not
     * support this method must return NOT_SUPPORTED in 'retval'.
     *
     * @return retval operation completion status.
     * @return volume 1.0f means unity, 0.0f is zero.
     */
    getMasterVolume() generates (Result retval, float volume);

    /*
     * Sets microphone muting state.
     *
     * @param mute whether microphone is muted.
     * @return retval operation completion status.
     */
    setMicMute(bool mute) generates (Result retval);

    /*
     * Gets whether microphone is muted.
     *
     * @return retval operation completion status.
     * @return mute whether microphone is muted.
     */
    getMicMute() generates (Result retval, bool mute);

    /*
     * Set the audio mute status for all audio activities. If the return value
     * is NOT_SUPPORTED, the software mixer will emulate this capability.
     *
     * @param mute whether audio is muted.
     * @return retval operation completion status.
     */
    setMasterMute(bool mute) generates (Result retval);

    /**
     * Get the current master mute status for the HAL, if the HAL supports
     * master mute control. AudioFlinger will query this value from the primary
     * audio HAL when the service starts and use the value for setting the
     * initial master mute across all HALs. HAL must indicate that the feature
     * is not supported by returning NOT_SUPPORTED status.
     *
     * @return retval operation completion status.
     * @return mute whether audio is muted.
     */
    getMasterMute() generates (Result retval, bool mute);

    /*
     * Returns audio input buffer size according to parameters passed or
     * INVALID_ARGUMENTS if one of the parameters is not supported.
     *
     * @param config audio configuration.
     * @return retval operation completion status.
     * @return bufferSize input buffer size in bytes.
     */
    getInputBufferSize(AudioConfig config)
            generates (Result retval, uint64_t bufferSize);

    /*
     * This method creates and opens the audio hardware output stream.
     *
     * @param ioHandle handle assigned by AudioFlinger.
     * @param device device type and (if needed) address.
     * @param config stream configuration.
     * @param flags additional flags.
     * @return retval operation completion status.
     * @return outStream created output stream.
     */
    openOutputStream(
            AudioIoHandle ioHandle,
            DeviceAddress device,
            AudioConfig config,
            AudioOutputFlag flags) generates (Result retval, IStreamOut outStream);

    /*
     * This method creates and opens the audio hardware input stream.
     *
     * @param ioHandle handle assigned by AudioFlinger.
     * @param device device type and (if needed) address.
     * @param config stream configuration.
     * @param flags additional flags.
     * @param source source specification.
     * @return retval operation completion status.
     * @return inStream created input stream.
     */
    openInputStream(
            AudioIoHandle ioHandle,
            DeviceAddress device,
            AudioConfig config,
            AudioInputFlag flags,
            AudioSource source) generates (Result retval, IStreamIn inStream);

    /*
     * Creates an audio patch between several source and sink ports.  The handle
     * is allocated by the HAL and must be unique for this audio HAL module.
     *
     * @param sources patch sources.
     * @param sinks patch sinks.
     * @return retval operation completion status.
     * @return patch created patch handle.
     */
    createAudioPatch(vec<AudioPortConfig> sources, vec<AudioPortConfig> sinks)
            generates (Result retval, AudioPatchHandle patch);

    /*
     * Release an audio patch.
     *
     * @param patch patch handle.
     * @return retval operation completion status.
     */
    releaseAudioPatch(AudioPatchHandle patch) generates (Result retval);

    /*
     * Returns the list of supported attributes for a given audio port.
     *
     * As input, 'port' contains the information (type, role, address etc...)
     * needed by the HAL to identify the port.
     *
     * As output, 'port' contains possible attributes (sampling rates, formats,
     * channel masks, gain controllers...) for this port.
     *
     * @param port port identifier.
     * @return retval operation completion status.
     * @return port port descriptor with all parameters filled up.
     */
    getAudioPort(AudioPort port)
            generates (Result retval, AudioPort port);

    /*
     * Set audio port configuration.
     *
     * @param config audio port configuration.
     * @return retval operation completion status.
     */
    setAudioPortConfig(AudioPortConfig config) generates (Result retval);

    /*
     * Gets the HW synchronization source of the device. Calling this method is
     * equivalent to getting AUDIO_PARAMETER_STREAM_HW_AV_SYNC on the legacy
     * HAL.
     *
     * @return retval operation completion status.
     * @return hwAvSync HW synchronization source
     */
    getHwAvSync() generates (Result retval, AudioHwSync hwAvSync);

    /*
     * Sets whether the screen is on. Calling this method is equivalent to
     * setting AUDIO_PARAMETER_KEY_SCREEN_STATE on the legacy HAL.
     */
    setScreenState(bool turnedOn);

    /*
     * Generic method for retrieving vendor-specific parameter values.
     * The framework does not interpret the parameters, they are passed
     * in an opaque manner between a vendor application and HAL.
     *
     * @param keys parameter keys.
     * @return retval operation completion status.
     * @return parameters parameter key value pairs.
     */
    getParameters(vec<string> keys)
            generates (Result retval, vec<ParameterValue> parameters);

    /*
     * Generic method for setting vendor-specific parameter values.
     * The framework does not interpret the parameters, they are passed
     * in an opaque manner between a vendor application and HAL.
     *
     * @param parameters parameter key value pairs.
     * @return retval operation completion status.
     */
    setParameters(vec<ParameterValue> parameters) generates (Result retval);

    /*
     * Dumps information about the stream into the provided file descriptor.
     * This is used for the dumpsys facility.
     *
     * @param fd dump file descriptor.
     */
    debugDump(handle fd);
};