Update comments only for IStreamOutEventCallback::onCodecFormatChanged
Test: compiles, this is a comment change only.
Bug: 150175043
Change-Id: I1895c737997fbf3cb509b4078b545658d11df198
- For health checking, the car watchdog client attemps to get
PERF_VEHICLE_SPEED.
- If successful, it regards VHAL is healhty and responds to the car
watchdog daemon. Otherwise, VHAL will be killed by the daemon.
Bug: 154367059
Bug: 154262220
Test: dumpsys android.automotive.watchdog.ICarWatchdog/default and check
if vehicle hal is registered as a client
Change-Id: I2eb466550c56f25ba550ebbd35dc8fde9681ea59
SCOPED_TRACE enables the error message contains enough detail to
easily narrow down the root cause
Bug: 154357354
Test: atest VtsHalSensorsV2_0Target VtsHalSensorsV2_1Target
Change-Id: Id6dbbe8bd8617776efec383d5276e9e12006f27d
These tests assumed that they were rooted before running, and due to
a combination of b/152655658 and b/154638140, these appeared to work
when a device already happened to be rooted and the test failures showed
up as problems with the test rather than as problems with the target
preparer.
This is the same workaround being used elsewhere.
Fixes: 154445273 # specifically about VtsHalSapV1_0TargetTest
Test: atest VtsHalSapV1_0TargetTest # passes 100%
The following tests, I confirm MultiSimTargetPreparer works, although my
test device has no SIM so I cannot get fully useful results.
Test: atest VtsHalRadioV1_0TargetTest # slot2 cases can now pass
Test: atest VtsHalRadioV1_1TargetTest # slot2 cases can now pass
Test: atest VtsHalRadioV1_2TargetTest # slot2 cases can now pass
Test: atest VtsHalRadioV1_3TargetTest # fully passes
Test: atest VtsHalRadioV1_4TargetTest # fully passes
Change-Id: Id62cb2e1b7a95552b560ab1d4ff2f63c0a7569a3
- Also adds TEST_MAPPING filters here to make sure sample driver tests
are still being filtered out.
Bug: 155577050
Test: mm
Test: atest VtsHalNeuralnetworksV1_0TargetTest
Change-Id: Ic8f556a957e6af340d500e2c4696b41b2a6e8516
- Also adds TEST_MAPPING filters here to make sure sample driver tests
are still being filtered out.
Bug: 155674368
Test: mm
Test: atest VtsHalNeuralnetworksV1_2TargetTest
Change-Id: I5f5d272742d4cdd6a8cc87ec035b5e2508eaa98f
Private sensors are the only sensor types that must define a type
string. For public sensors, a type string can be left empty as it will
be overridden by the sensors frameork.
Bug: 155514483
Test: atest VtsHalSensorsV2_0Target
Change-Id: Ib5f8fd513313670e88c2b973c1ff724658914eb2
- detect cycle (CycleTest)
- detect bad execution order (mutateExecutionOrderTest)
- detect lifetime inconsistent with whether operand is written (mutateOperandLifeTimeTest)
- detect lifetime inconsistent with Model inputIndexes/outputIndexes (mutateOperandInputOutputTest)
- detect incorrect number of consumers (mutateOperandNumberOfConsumersTest)
- detect operand written multiple times (mutateOperandAddWriterTest)
- detect operand never written (mutateOperationRemoveWriteTest)
Bug: 66478689
Test: VtsHalNeuralnetworksV1_*TargetTest
Change-Id: Id4ba19660bbd31a16f8a675f7b6437f4d779e8da
Merged-In: Id4ba19660bbd31a16f8a675f7b6437f4d779e8da
(cherry picked from commit af51663e99)
For easy transition from SchedTune to UtilClamp, direct access to these
cgroups should be abstracted by using task profiles. Replace writepid
commands with new task_profiles command.
Bug: 155419956
Test: change .rc file and confirm task profile is applied
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Change-Id: I2732f7365351f132dbf0566319e3969c2a25b3e4
Merged-In: I2732f7365351f132dbf0566319e3969c2a25b3e4
For easy transition from SchedTune to UtilClamp, direct access to these
cgroups should be abstracted by using task profiles. Replace writepid
commands with new task_profiles command.
Bug: 155419956
Test: change .rc file and confirm task profile is applied
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Change-Id: Ide373c283359cf4b73af4cb0813d8c0306942595
Merged-In: Ide373c283359cf4b73af4cb0813d8c0306942595
For easy transition from SchedTune to UtilClamp, direct access to these
cgroups should be abstracted by using task profiles. Replace writepid
commands with new task_profiles command.
Bug: 155419956
Test: change .rc file and confirm task profile is applied
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Change-Id: Ie81da380a9343e098362f5fee5026799c4486e7e
Merged-In: Ie81da380a9343e098362f5fee5026799c4486e7e
Fixes: 154634207
Test: Load onto flame and confirm that subhal .so
android.hardware.sensors@2.X-fakesubhal-config3.so loads when it is
living in the /vendor/lib64/hw directory using
adb shell lshal debug android.hardware.sensors@2.0::ISensors/default
Change-Id: I8a676b97f6f6992e8937ecf31c3b7af06e676ebb
This is to handle the case where HAL isn't using the hidl shim.
Test: dumpsys on Pixel 2
Bug: 145300768
Change-Id: I74874a025904887cc27ec00518f4261dd24e291a
Some vendors implementation will reset wifi chip when doing interface
down.
Accordingly, We need to avoid the interface down/up when doing
setMacAddress to avoid loss of sync between framework and firmware.
This commit uses a BOARD_WIFI_AVOID_IFACE_RESET_MAC_CHANGE macro to
check if it is needed to avoid interface down/up at setMacAddress.
Bug: 153771961
Test: VTS Test
Test: atest VtsHalWifiV1_2TargetTest
Change-Id: I971764f1c272ebfd245959974fa0d1b10ba7c39b
Use the max/min in areaConfig to indicate the recommended tire
pressure.
Explain areaId for HVAC_MAX_DEFROST
Bug: 153906683
Test: make and flash
Change-Id: Ie71279dba4e87efdec75934dcac1c86e22fffaa3
setActiveConfig will take effect follow by a frame updated. To
make sure it takes effect, send a frame after setActiveConfig.
Bug: 150831726
Test: VtsHalGraphicsComposerV2_4TargetTest
Change-Id: Ib999e808ac1339d1cba9e25e9a57b681b055cc99
Updates tests and fake subhals to support Multi-HAL 2.1 to make
on-device testing feasible.
Bug: 149758467
Test: Verify that the new unit tests and subhals in this topic load and
run on a Pixel device
Change-Id: I7a9d7c1678826bb1956119e8b76f591c7bc213e1
Bug: 149758467
Test: Verify that the new unit tests and subhals in this topic load and
run on a Pixel device
Change-Id: I275274659816b3a00374fb0b7a93f199874afdcd
Bug: 149758467
Test: Load onto device and verify VTS passes
Test: Verify new fake subhals load properly and that unit tests pass
that have been updated in this topic
Change-Id: Ie73458b3447dab80f6b692e55832ef562636bfdb
