cec@2.0 spec was published with HDMI 2.0b in March 2016.
it added a few important message types, and
also require new mechanism to build and maintain device information.
Test: manual
Bug: 122853595
Change-Id: I00819829573dc260b043f5b14a15c29bc2a119b0
Missing two CecMessageTypes that are in CEC Spec 1.4b,
but were not added in the original interface.
Test: manual
Bug: 122273961
Change-Id: Ifd3648544c8dcc85c23b4e2f88606a9347025f95
audio.h and its dependencies (audio-effect.h, sound_trigger.h...)
used to be shared between system and vendor code.
This led to multiple problems:
1) Such sharing contradicts the Treble policy of
strict independence of framework and vendor code.
2) When audio.h was changed, every vendor needed to update
its code in the next release. This meant that audio*.h
headers were mostly changed in backward compatible manner.
Nevertheless, for P the HIDL interface and thus the audio.h
interface are changed in backward incompatible way.
(Some enum are becoming 64 bit long).
3) As the headers were common, some API used only by the framework
needed to be visible to the vendors (mostly enum values).
4) Treble policy is to support at least one previous HAL version
As a result the audio*.h headers are now duplicated,
one set for the framework, and one for the vendor.
Each set will evolve independently. After this split,
the framework-only APIs will be removed from the vendor headers
and vice versa.
The split is implements as such:
+ for system code
- NOT moving the libaudio_system_headers
Eg: system/audio.h and system/audio_effects/effect_equalizer.h
are still in system/media/audio
- the legacy audio HAL API that were in libhardware headers
are now in libaudiohal_legacy_headers
Eg: hardware/audio.h and hardware/audio_effect.h
are now in frameworks/av/media/libaudiohal/legacy/
+ for vendor code
- moving libaudio_system_headers and the legacy audio HAL API
that were in libhardware_headers in
android.hardware.audio.common.legacy@2.0
Note that those headers are now versioned, so migrating to a @4.0
HIDL HAL will mean changing the legacy dependency too.
Eg: system/audio.h, system/audio-effect.h, hardware/audio.h
are now in hardware/interfaces/audio/common/2.0/legacy
- the legacy audio effect HAL API that was in libaudioeffects
is now moved in android.hardware.audio.effect.legacy@2.0
Eg: audio_effects/effect*.h are now in
hardware/interfaces/audio/effect/2.0/legacy
- the legacy sound trigger HAL API that were in libhardware_headers
is now moved in android.hardware.soundtrigger.legacy@2.0
Eg: hardware/sound_trigger.h is now in
hardware/interfaces/audio/effect/2.0/legacy
libaudioutil being used by both system and vendor, had
to be renamed for system to libaudioutil_system.
Vendor libs that now depend on the audio.h of a specific
version and are not extensively referenced in non google code,
append @2.0 to their name.
Note that headers that are not expected to change in the 4.0 HAL are
left in all-versions folder to avoid duplication.
This is an implementation detail as the versioned libraries export
the all-versions headers.
Note that strict vendor-system separation is enforced by the
build-system. The system headers are not available for vendor
libs and vice-versa.
Note that this patch is split between numerous git repository (>10),
all the commits having the same Change-id for searchability.
Note that audio_policy.h is no longer exposed to vendors
as the legacy audio policy HAL API was never officially supported.
As a result the audiopolicy stub implementation has been removed.
Test: compile taimen-userdebug walleye-userdebug
sailfish-userdebug marlin-userdebug
gce_x86_phone-userdebug gce_x86_phone
full-eng aosp_arm aosp_x86-eng
Test: check that the emulator booted and played audio
Test: full QA on sailfish-userdebug and taimen-userdebug
Bug: 38184704
Change-Id: I950f4e0a55613d72e32eba31bd563cb5bafe2d1a
Signed-off-by: Kevin Rocard <krocard@google.com>
Removing whenever I see these in code reviews.
Test: none
Merged-In: I4322f533a837d55618ec2ed2125e8966ace9d61d
Change-Id: I4322f533a837d55618ec2ed2125e8966ace9d61d
Removing whenever I see these in code reviews.
Test: none
Merged-In: I4322f533a837d55618ec2ed2125e8966ace9d61d
Change-Id: I4322f533a837d55618ec2ed2125e8966ace9d61d
Register a death recipient to remove the callback if
the framework side died.
BUG: 67913697
Test: VTS
Change-Id: I51ce5c85c9ec5d1bc90cac72f314647e1075d657
Automatic mk -> bp conversion for all modules here
which can be converted and built automatically.
Test: Soong resolves all dependencies
Bug: 37512442
Change-Id: Ib789212cb88d55731397c600d132e7c672c0d8be
To prevent property name collisions between properties of system and
vendor, 'vendor.' prefix must be added to a vendor HAL service name.
You can see the details in http://go/treble-sysprop-compatibility.
Test: succeeded building and tested on a walleye device
Bug: 36796459
Change-Id: I4e8fbee791ec917a8f627a1366f4d44ec7e6febc
And use VtsHalTargetTestDefaults.
This is a partial cherry-pick of ag/2657080.
Bug: 64040096
Test: compiles, works fine in internal master
Merged-In: I8f6995e9536a9aefe283ee3effec9f5a7f03b620
Change-Id: I76d47d8546416b57055841851a9d343026cd3210
And use VtsHalTargetTestDefaults.
Bug: 64040096
Test: crop out all non-affected tests from vts-hal-hidl.xml and run
vts-tradefed run commandAndExit vts-hal-hidl --skip-all-system-status-check
--skip-preconditions
2 failures, same as without this change:
GatekeeperHidlTest.DeleteAllUsersTest
GatekeeperHidlTest.DeleteUserTest
Change-Id: I8f6995e9536a9aefe283ee3effec9f5a7f03b620
Update the Android.bp generated with hidl-gen.
Test: build with and without BOARD_VNDK_VERSION=current
Bug: 63866913
Change-Id: I1a9db1df49e0f13c5790da2b118ae9ec63ba34a7
Allow HAL definition libs to be static.
Bug: 32920003
Bug: 64040096
Test: update-all-google-makefiles.sh
Change-Id: I1483d572bea6799717d1614fb7d52fe225e31104
android.hidl.base@1.0 and android.hidl.manager@1.0 are built into libhidltransport.
Test: links
Bug: 33276472
Merged-In: I08aaad80f7e2fc262aa3a8b66fe932e8133a928d
Change-Id: I08aaad80f7e2fc262aa3a8b66fe932e8133a928d
This has been copy pasted and isn't actually required.
Test: all hals manually tested to work on internal marlin (which have them binderized).
Note: tv hals not tested (and they never have been). Filed b/36562029
Note: for thermal hal, could only run VTS/check logs for errors.
Test: lshal outputs proper stuff
Fixes: 31928447
Change-Id: Id1be584dc0fa2d70e9189b922335146bf6d1382d
The getService() and registerAsService() methods of interface objects
now have default parameters of "default" for the service name. HALs
will not have to use any service name unless they want to register
more than one service.
Test: builds
Bug: 33844934
Change-Id: I380736fdf1cc85976c24f104e2cf5cb22ec24364
We need google shims on the vendor partition because they are providing
an implementation of a vendor defined interface. They were written by
google just as a courtesy/to make the transition easier. They're
basically a set for vendors to assemble their hal implementations
from.
Bug: 34135607
Test: marlin persist.hal.binderization on/off
Change-Id: I2e2af5af39264cf290259755bb9b2eb9827a21f5
Java intermediates are now created in the common rather than the device-
specific generated sources subdirectory.
Bug: 33842609
Test: make
Change-Id: I16af4cd19bf0b24baa0ad9ebfdb86b4d959c8672
The getService() and registerAsService() methods of interface objects
now have default parameters of "default" for the service name. HALs
will not have to use any service name unless they want to register
more than one service.
Test: builds; verify HAL still works
In support of b/33844934
Change-Id: I6d152b95c39723c72f527c0767d2f3775e9a29f1
Removing empty intermediate Android.mk files for vehicle, tv cec, and tv input vts test projects.
Replaced with direct pointing to the Android.mk file under functional/vts/testcases/hal
Test: make vts
Change-Id: I64a0a7c236f2ef6a2019cbde3b93ac2324df3752
Decide target_basepaths by device's bitness.
On 32-bit target, do not include */lib64.
Bug: 33930594
Test: vts-tradefed run commandAndExit vts -m VibratorHidlTest -l INFO
Change-Id: I340ded1d763dc194da461ecf183c6a2ff5f5ee6f
* Using update-makefiles.sh to add make rule for profiler in Android.bp
* Remove make rule for profiler in vts/Android.mk.
Bug:31930023
Test: mma
Change-Id: Iea834d8610501c2fce63f65742db31bafb85c0b8
