Added changes as per ANAPIC review to improve
documentation of few hidl APIs.
Bug: 148617258
Test: Not tested as there is no code change.
Change-Id: I3f91c6b8aad3f34807534a3fbc3cf5a3c3233cd7
Since some of the APIs are overridden by an upgraded API in newer HAL,
Check the return value of such deprecated APIs and if it's
FAILURE_UNKNOWN, don't proceed and consider it as pass.
Bug: 147821406
Bug: 146991831
Bug: 149045565
Test: atest VtsHalWifiSupplicantV1_0TargetTest
Test: atest VtsHalWifiSupplicantV1_1TargetTest
Test: atest VtsHalWifiSupplicantV1_2TargetTest
Change-Id: I28c4431bfeaaa7a628be71f41f8299a85fed7eed
Check the return value of deprecated APIs and if it's
FAILURE_UNKNOWN, don't proceed and consider it as pass.
Bug: 147434122
Test: atest VtsHalWifiSupplicantV1_2TargetTest
Change-Id: Ib6cfb70c514f10faa54ca11011657528374175e6
Add channel bandwidth, max number of Rx spatial streams, max number of
Tx spatial streams to connectionCapabilitie() which is derived from
association request and response frames after a new association.
bug: 147390882
Test: VTS test
Test: manual test with various phones and APs.
Change-Id: Iaeb5e0419887b766ec1a4cb13843494539aa3ddd
Add support to configure FILS key_mgmt types while adding
configurations for FILS enabled APs. FILS defines two different
AKM suites, one based on SHA256 and the other based on SHA384.
Also add API to enable ERP keys generation while connecting FILS
enabled APs. Once generated, the ERP keys can be used to make faster
connections to the FILS enabled APs which are within the same realm
as that of the AP with which the ERP keys are generated.
FILS also provides provision to exchange Higher Layer Packets(HLPs)
along with association request and association response frames. Add
API to configure HLP packets that can be sent with Association
request while connecting to FILS enabled APs. Also add API to flush the
HLP packets that were already configured during previous connection
requests.
Bug: 143259898
Test: WiFi basic sanity test
Test: VTS test
Change-Id: If5cb0c112d46fa8695b4517f42cb7c6706970751
Create new callback to deliver eap error code
from supplicant to framework
Bug: 139880103
Test: atest VtsHalWifiSupplicantV1_3TargetTest
Change-Id: I6604356672899d7a0933af6fb20879bb91871efd
Add support to add SAE Authentication algorithm in the
framework (public API), and in the Supplicant HAL.
Bug: 147253259
Test: Manual connection to SAE, PSK, OWE and Open APs
Test: atest WifiConfigurationTest
Change-Id: I853e816be1ba618d61ac0fcb4b116879baba4be2
Added hidl call back function to notify framework about
bss transition request frame handling status.
Also fixed few code style issues by running hidl-gen -Lformat.
Bug: 139474288
Test: Manual
Test: VTS test
Change-Id: I00760f14d81a59e63042b1a5be9f9e3f74ff3a83
Update VTS test for supplicant 1.2 to skip the DPP tests
if the underyling HAL is 1.3. The reason is because 1.3
HAL uses different callbacks.
Bug: 139381558
Test: atest VtsHalWifiSupplicantV1_2Host
Change-Id: Ie9cd93e33bda3ca22ee2b5593d185f1918be847e
Added necessary types and enhanced the callbacks for DPP R2.
Added VTS tests for DPP R2 using HAL 1.3.
Bug: 139381558
Test: atest VtsHalWifiSupplicantV1_3Host
Change-Id: I18a58d6bd0e0b8260946f2186abda5bac93729c7
P2P vts tests should be omitted if p2p
is not supported.
Bug: 145315660
Test: atest VtsHalWifiSupplicantP2pV1_0TargetTest
Change-Id: Ia4cda22a2fce22335f8f230dbd7fd3418b1b3890
This change includes two parts:
* Define WAPI proto, key management, and cipher constants.
* Expose WAPI HAL API for setting the certificate suite.
Bug: 139257562
Test: atest VtsHalWifiSupplicantV1_3TargetTest
Change-Id: Id7a58b242776d641a091b9ede3f147b7d42003d1
1. Added hidl API to return MBO and OCE feature capability.
2. Added hidl API to update the cellular data status.
Bug: 139474288
Test: Manual
Test: VTS test
Change-Id: I4fe1c2ff054f5cc7288e9ed234d29a8ffcca7456
From the log and case logic,when assertTrue isSupplicantRunning is not the real wpa_supplicant status.
So occasionally there will be a timeout when waiting for a callback in the waitForHidlService method.
Because this is a low memory version and it is gsi image, we can't modify the image, so we can solve it by extending the time.
Bug:[142585026]
Test:run vts of the VtsHalWifiSupplicantV1_2Host.
Change-Id: Ideef032d310165d956c3ca0967b26bc3e3f44c3b
This commit adds the API for getConnectionCapabilities() in
ISupplicantStaIface HAL. This is used to return the Wifi support
for the connection on this STA interface.
Bug: 138634524
Bug: 140168755
Test: Manual
Test: VTS test
Change-Id: I24ff3c16434067e41491298e41041bdfdf06452a
libcrypto is unused, which causes problems when boringssl hash
injection is turned on as the code is all stripped and there is
nothing left to inject the hash into.
See http://r.android.com/1117291 for the AOSP change to related
modules.
Bug: 137267623
Test: croot hardware/interfaces/wifi && mma
Change-Id: I9d002c0b723cf9a04ee64641b5281e65912595c8
libcrypto is unused, which causes problems when boringssl hash
injection is turned on as the code is all stripped and there is
nothing left to inject the hash into.
Bug: 137267623
Test: Ran the following together with the changes from
http://r.android.com/q/topic:bug137267623_bsslselftest
m VtsHalDrmV1_{0,1,2}TargetTest \
VtsHalWifiHostapdV1_{0,1}TargetTest{,Util} \
VtsHalWifiSupplicantV1_{0,1,2}TargetTest{,Util} \
VtsHalWifiSupplicantP2pV1_{0,2}TargetTest
(croot hardware/interfaces/confirmationui ; mma)
(croot hardware/interfaces/drm ; mma)
(croot hardware/interfaces/keymaster ; mma)
Change-Id: Ib0607671ef71d99becb483774f810aad9762f4f1
hidl-generated makefiles are now generated such that bpfmt(file) == file.
Bug: 67417008
Test: enable bpfmt hook
Change-Id: I53e5bf67a0d314e1b10c0ba0c7172a7af358ddcc
hidl-generated makefiles are now generated such that bpfmt(file) == file.
Bug: 67417008
Test: enable bpfmt hook
Change-Id: I1f69d292bc23a7cc293a66110cb02d597e1019ad
The force 5GHz Go will cause fail when country code is 00 or chip
doesn't support 5GHz.
Change test parameter to force 0 which means driver decide GO channel.
Bug: 130208180
Test: vts-tradefed run commandAndExit vts-hal --skip-all-system-status-check --primary-abi-only --skip-preconditions --module VtsHalWifiSupplicantP2pV1_2Target -l INFO
Change-Id: I0d2a8fcba4ece616ddeccbae36146329e9043157
Following ANAPIC Review:
onSuccess callback was returning only a single status code, CONFIGURATION_SENT.
Renamed the callback to onSuccessConfigSent and eliminated the status code.
Bug: 124459312
Test: atest DppManagerTest
Test: atest SupplicantStaIfaceHalTest
Test: act.py -c ../WifiDppConfig.json -tc WifiDppTest
Test: vts-tradefed run commandAndExit vts --skip-all-system-status-check --primary-abi-only --skip-preconditions --module VtsHalWifiSupplicantV1_2Host
Change-Id: I4d7c5732ded55902b1f235d40d3babe3be372bf7
There are compatibility issue with driver for P2P random MAC.
The framework needs to check driver capability first before enabling
P2P random MAC address feature.
Bug: 118904478
Test: vts - atest VtsHalWifiSupplicantP2pV1_2TargetTest
Test: manual test
* Enter WiFI Direct Page
* check the feature is enabled in logcat
* WifiP2pService: Supported feature: P2P MAC randomization
* check p2p0 MAC address is randomized.
Change-Id: I28e226e7d51e3d5e3e6013d3772e643c1df1ab54
This patch adds SHA256 key management definition
to be able to use more robust algorithm.
Test: Build with dependent CLs
Bug: 68787540
Signed-off-by: Daichi Ueura <daichi.ueura@sony.com>
Change-Id: I2233b9cb04488f6703f8fc3e6bb3a9188ed53ddc
(cherry-picked from commit 1a431a9e7c3ace89aabc738d9a19de2bb2aa57a5
