Since these were combined into libhidlbase.
Bug: 135686713
Test: build only (libhwbinder/libhidltransport are empty)
Change-Id: I075670b64eebbbbd6a6ae0e84ad51bf1c6f5ba36
hidl-generated makefiles are now generated such that bpfmt(file) == file.
Bug: 67417008
Test: enable bpfmt hook
Change-Id: I1f69d292bc23a7cc293a66110cb02d597e1019ad
the configstore functionality was added in Q. But The configstore will
be deleted. So additional function is deleted.
Bug: 124531214
Test: build & boot
Test: adb shell lshal | grep configstore & check configstore 1.2
Change-Id: Idbb00b972bc082bd75bba94dbff9cee19df48b89
Previously we couple wide color gamut display and color management together,
which is because we only do color management when we have wide color gamut
display. However, we would also want display that doesn't support wide color
gamut but is calibrated and is capable of managing sRGB gamut to have color
management. This means we will decouple wide color gamut display from color
management, a device can indicate that it's color managed without having wide
color gamut display and only manage color within sRGB gamut.
BUG: 111505327
Test: BUild, flash and check Natural/Boosted mode.
Change-Id: If1241ce040a6f691609d8f8d72a2d6f3141557cf
This change provides a reference implementation of the configstore HAL
v1.1.
Bug: 69691076
Test: tested on walleye-userdebug
Change-Id: I68ee224bcbda64f6fef91e8a0f95adb32d504aad
Configstore was up-revisioned from 1.0 to 1.1. However no new
APIs were added to 1.1. Therefore configstore in master will be down
revisioned to 1.0.
Bug: 71555815
Test: lshal | grep configsotre
Test: "cat proc/<configstore pid>/status | grep Seccomp " return:
Seccomp: 2
Change-Id: I65d2dc06fbe12d0c0ccc020bbd287e0b14320f2f
To support pthread_attr_setinheritsched for any code that uses pthread_create.
Bug: http://b/67471710
Test: no rolling configstore crashes when booting with the pthread change
Change-Id: I5847adba36b6a5d13b7bd20f955e432c14ce78b8
To prevent property name collisions between properties of system and
vendor, 'vendor.' prefix must be added to a vendor HAL service name.
You can see the details in http://go/treble-sysprop-compatibility.
Test: succeeded building and tested on a walleye device
Bug: 36796459
Change-Id: I4e8fbee791ec917a8f627a1366f4d44ec7e6febc
Configstore was up-revisioned from 1.0 to 1.1. However no new
APIs were added to 1.1. Therefore configstore in mr1 will be down
revisioned to 1.0.
Bug: 64999074
Test: lshal | grep configsotre
Test: "cat proc/<configstore pid>/status | grep Seccomp " return:
Seccomp: 2
Change-Id: Ia2614439cd620fbe5fbd427571ab55a15089cc47
Information such as tombstones and callstack are important when
debugging why a process crashed. configstore's seccomp filter
and selinux policy are currently overly strict and are blocking
the collection of crash data.
In order to keep configstore's sandbox as strict as possible, use
Crash_dump's fallback mechanism to collect crash data. This uses a
local socket to send crash data to tombstoned.
Bug: 64768925
Test: killall -ABRT android.hardware.configstore@1.1-service
Verify that configstore callstack gets dumped to logcat.
Verify that a crash tombstone gets recorded to /data/tombstones
Test: proto_fuzzer runs without crashing
Change-Id: I3c3e13d6aa1c1e2dda2a619dfa815375ee7ebff6
(cherry picked from commit 60ced29112)
Information such as tombstones and callstack are important when
debugging why a process crashed. configstore's seccomp filter
and selinux policy are currently overly strict and are blocking
the collection of crash data.
In order to keep configstore's sandbox as strict as possible, use
Crash_dump's fallback mechanism to collect crash data. This uses a
local socket to send crash data to tombstoned.
Bug: 64768925
Test: killall -ABRT android.hardware.configstore@1.1-service
Verify that configstore callstack gets dumped to logcat.
Verify that a crash tombstone gets recorded to /data/tombstones
Test: proto_fuzzer runs without crashing
Change-Id: I3c3e13d6aa1c1e2dda2a619dfa815375ee7ebff6
And use VtsHalTargetTestDefaults.
Bug: 64040096
Test: crop out all non-affected tests from vts-hal-hidl.xml and run
vts-tradefed run commandAndExit vts-hal-hidl --skip-all-system-status-check
--skip-preconditions
2 failures, same as without this change:
GatekeeperHidlTest.DeleteAllUsersTest
GatekeeperHidlTest.DeleteUserTest
Change-Id: I8f6995e9536a9aefe283ee3effec9f5a7f03b620
Configstore HAL is accessible to third party apps and thus requires
a tight sandbox that reflects the limited system access this HAL
needs.
We use two primary mechanisms to sandbox configstore, selinux and
seccomp, with the goal of restricting its access to userspace and
the kernel. The addition of a seccomp filter is primarily aimed
at reducing the kernel's attack surface that is reachable by
configstore HAL.
Seccomp filters are architecture dependent, so filters need to be
added for each architecture. This change adds a seccomp filter for
arm64 and issues a non-fatal runtime warning for other architectures
which still require a seccomp filter.
Bug: 36453956
Test: boot Marlin and Angler. Verify that configstore is not aborting
due to seccomp violations.
Test: "cat proc/<configstore pid>/status | grep seccomp " returns:
seccomp: 2
Which indicates that configstore is using seccomp-bpf.
Change-Id: Iab014ff357b7329085a5e18a92f51838d2c72371
(cherry picked from commit ed95043d64)
Update the Android.bp generated with hidl-gen.
Test: build with and without BOARD_VNDK_VERSION=current
Bug: 63866913
Change-Id: I1a9db1df49e0f13c5790da2b118ae9ec63ba34a7
Allow HAL definition libs to be static.
Bug: 32920003
Bug: 64040096
Test: update-all-google-makefiles.sh
Change-Id: I1483d572bea6799717d1614fb7d52fe225e31104
Configstore HAL is accessible to third party apps and thus requires
a tight sandbox that reflects the limited system access this HAL
needs.
We use two primary mechanisms to sandbox configstore, selinux and
seccomp, with the goal of restricting its access to userspace and
the kernel. The addition of a seccomp filter is primarily aimed
at reducing the kernel's attack surface that is reachable by
configstore HAL.
Seccomp filters are architecture dependent, so filters need to be
added for each architecture. This change adds a seccomp filter for
arm64 and issues a non-fatal runtime warning for other architectures
which still require a seccomp filter.
Bug: 36453956
Test: boot Marlin and Angler. Verify that configstore is not aborting
due to seccomp violations.
Test: "cat proc/<configstore pid>/status | grep seccomp " returns:
seccomp: 2
Which indicates that configstore is using seccomp-bpf.
Change-Id: Iab014ff357b7329085a5e18a92f51838d2c72371
Add vts test module for configstore@1.1
Test: make vts -j40 && run commandAndExit vts -m
VtsHalConfigstoreV1_1Target
Bug: 63071317
Change-Id: I405f4409bc2ac4acdf07728b950ba9b653eb3328
These makefiles are not in dev topic branches
or AOSP currently so they were not updated. This
update adds hidl-generated-module defaults.
Test: pass
Change-Id: Ie52c54877d795bf5358aa600e6d1a13a4f166d25
This change provides a reference implementation of the configstore HAL
v1.1.
Bug: 37727469
Test: Built sailfish-userdebug and configstore-1.1 works
Change-Id: I75e7fd1da8e90ae48d779a3ba28957c5a93a5529
