These tests were created for IRadio 1.2 when all devices supported GSM,
and REQUEST_NOT_SUPPORTED was valid for devices that didn't support GSM. Change the VTS logic to test EUTRAN instead of GERAN.
Remove REQUEST_NOT_SUPPORTED for tests now without GERAN and add REQUEST_NOT_SUPPORTED for all GERAN-specific tests.
Test: atest VtsHalRadioTargetTest
Bug: 294965245
Change-Id: Ib36b171e33451bf0c9adc0b065a4c74df357e77e
Merged-In: Ib36b171e33451bf0c9adc0b065a4c74df357e77e
These tests were created for IRadio 1.2 when all devices supported GSM,
and REQUEST_NOT_SUPPORTED was valid for devices that didn't support GSM. Change the VTS logic to test EUTRAN instead of GERAN.
Remove REQUEST_NOT_SUPPORTED for tests now without GERAN and add REQUEST_NOT_SUPPORTED for all GERAN-specific tests.
Test: atest VtsHalRadioTargetTest
Bug: 294965245
Change-Id: Ib36b171e33451bf0c9adc0b065a4c74df357e77e
If the test fails, the allowed network type bitmap will not be reset to
the previous value. Instead of using ASSERT_EQ, change to EXPECT_EQ to
allow the test to continue to the reset.
Test: atest VtsHalRadioTargetTest
Bug: 264913330
Change-Id: I719afa2e0d9ebc41a329f38f3eca597c9381f2f9
To be consistent with the timeout set in IRadio 1.0/1.1 VTS
This increases the timeout per-test, but there is still a timeout
for all tests in the module to complete.
Test: atest VtsHalRadioV1_*TargetTest for all
Bug: 292197532
(cherry picked from https://googleplex-android-review.googlesource.com/q/commit:f0c772199bde052764a697b6de478851126fa596)
Merged-In: I421c13e65efa565753337dc21e6520682e726e81
Change-Id: I421c13e65efa565753337dc21e6520682e726e81
To be consistent with the timeout set in IRadio 1.0/1.1 VTS
This increases the timeout per-test, but there is still a timeout
for all tests in the module to complete.
Test: atest VtsHalRadioV1_*TargetTest for all
Bug: 292197532
Change-Id: I421c13e65efa565753337dc21e6520682e726e81
For devices not in LTE service, the vts test returns INVALID_ ARGUMENTS is an expected result
Bug:289756066
Test:
VtsHalRadioV1_5TargetTest PerInstance/RadioHidlTest_v1_5#startNetworkScan/0_slot1
VtsHalRadioV1_5TargetTest PerInstance/RadioHidlTest_v1_5#startNetworkScan/1_slot2
Change-Id: I873d51e089b27aa0cc0dc9f5f25fd8ffaa4d8f40
Signed-off-by: liuxiangjun <liuxiangjun3@xiaomi.com>
Merged-In: I873d51e089b27aa0cc0dc9f5f25fd8ffaa4d8f40
For devices not in LTE service, the vts test returns INVALID_ ARGUMENTS is an expected result
Bug:289756066
Test:
VtsHalRadioV1_5TargetTest PerInstance/RadioHidlTest_v1_5#startNetworkScan/0_slot1
VtsHalRadioV1_5TargetTest PerInstance/RadioHidlTest_v1_5#startNetworkScan/1_slot2
Change-Id: I873d51e089b27aa0cc0dc9f5f25fd8ffaa4d8f40
Signed-off-by: liuxiangjun <liuxiangjun3@xiaomi.com>
Refactor class design so RadioServiceTest extends TestWithParam and
each individual radio service test extends RadioServiceTest.
Move setup and teardown logic common to all classes to RadioServiceTest.
Add logs to print when each test starts/finishes to help debug issues.
Remove unused imports and fix some typos.
Change unique_lock to lock_guard in notify to prevent MTE errors.
Test: atest VtsHalRadioTargetTest on fullmte build
Bug: 263940636
Change-Id: I2f6844f07d4518c00d47f98e5e15bea0a809fa84
Merged-In: I2f6844f07d4518c00d47f98e5e15bea0a809fa84
nvResetConfig takes some time to reset the modem, causing subsequent
tests to fail with a timeout since the modem is unavailabe.
Add a timeout after nvResetConfig to allow the modem to be up again
before running the next test.
Bug: 259674407
Test: atest VtsHalRadioTargetTest
Change-Id: Ic7188f9d8ccfcd90d844b45e3b370a3be3c515d6
Merged-In: Ic7188f9d8ccfcd90d844b45e3b370a3be3c515d6
(cherry picked from commit ddaea2e5a4)
Network scan check periodicity only if scan type is PERIODIC.
Fix MCC/MNC checks to handle null strings.
Test: atest VTS
Bug: 259674407
Change-Id: I77e0706f413ce9defb174f00ee145dcc01f5d780
We check SIM card status is PRESENT before running any VTS tests, so
ensure that it's enforced in the configs as well.
Test: atest VtsHalRadioTargetTest
Bug: 249143796
Change-Id: I1b2c317e21db118e4b957804feb76f266d887b20
Merged-In: I1b2c317e21db118e4b957804feb76f266d887b20
(cherry picked from commit 658fdaaa2a)
We check SIM card status is PRESENT before running any VTS tests, so
ensure that it's enforced in the configs as well.
Test: atest VtsHalRadioTargetTest
Bug: 237504027
Change-Id: I1b2c317e21db118e4b957804feb76f266d887b20
Merged-In: I1b2c317e21db118e4b957804feb76f266d887b20
1. nvResetConfig takes some time to reset the modem, causing subsequent
tests to fail with a timeout since the modem is unavailabe.
Add a timeout after nvResetConfig to allow the modem to be up again
before running the next test.
2. Remove invalid errors for start/stopKeepalive. These tests should
fail due to invalid arguments, so remove NONE as a possible error.
RADIO_NOT_AVAILABLE should also be removed.
3. Fix incorrect startNetworkScan_InvalidInterval tests, since we only
check the interval when the scan type is PERIODIC.
4. Save and reset the previous allowed network type bitmap after the
test. Combine get/set into one test that tests both behaviors.
5. Fix checks for MCC/MNC in getDataRegistrationState
Bug: 277626718
Bug: 240953393
Bug: 264913330
Bug: 259674407
Bug: 242801688
Test: atest VtsHalRadioTargetTest
Change-Id: Ic7188f9d8ccfcd90d844b45e3b370a3be3c515d6
Merged-In: Ic7188f9d8ccfcd90d844b45e3b370a3be3c515d6
The code currently uses 'dsds' to detect dual-SIM configurations,
but it misses 'dsda' configurations, resulting in test failures.
Should use the detection mechanism by adding handling for 'dsda',
ensuring accurate detection of all dual-SIM configurations.
Bug: 277705768
Test: vts -m VtsHalRadioTargetTest -t PerInstance/RadioConfigTest#checkPortInfoExistsAndPortActive/0_android_hardware_radio_config_IRadioConfig_default
Change-Id: Ie73a958ff14e86f440831e18291b6599b6eac30b
Signed-off-by: Jia Jia <jia.jia@zte.com.cn>
The code currently uses 'dsds' to detect dual-SIM configurations,
but it misses 'dsda' configurations, resulting in test failures.
Should use the detection mechanism by adding handling for 'dsda',
ensuring accurate detection of all dual-SIM configurations.
Bug: 277705768
Test: vts -m VtsHalRadioTargetTest -t PerInstance/RadioConfigTest#checkPortInfoExistsAndPortActive/0_android_hardware_radio_config_IRadioConfig_default
Change-Id: Ie73a958ff14e86f440831e18291b6599b6eac30b
Signed-off-by: Jia Jia <jia.jia@zte.com.cn>
1. nvResetConfig takes some time to reset the modem, causing subsequent
tests to fail with a timeout since the modem is unavailabe.
Add a timeout after nvResetConfig to allow the modem to be up again
before running the next test.
2. Remove invalid errors for start/stopKeepalive. These tests should
fail due to invalid arguments, so remove NONE as a possible error.
RADIO_NOT_AVAILABLE should also be removed.
3. Fix incorrect startNetworkScan_InvalidInterval tests, since we only
check the interval when the scan type is PERIODIC.
4. Save and reset the previous allowed network type bitmap after the
test. Combine get/set into one test that tests both behaviors.
5. Fix checks for MCC/MNC in getDataRegistrationState
Bug: 277626718
Bug: 240953393
Bug: 264913330
Bug: 259674407
Bug: 242801688
Test: atest VtsHalRadioTargetTest
Change-Id: Ic7188f9d8ccfcd90d844b45e3b370a3be3c515d6
We check SIM card status is PRESENT before running any VTS tests, so
ensure that it's enforced in the configs as well.
Test: atest VtsHalRadioTargetTest
Bug: 237504027
Change-Id: I1b2c317e21db118e4b957804feb76f266d887b20
Currently getSlicingConfigAPI always returns NOT_SUPPORTED.
But GetSlicingConfig is supported in Android U. and VTS will fail.
This change updates the expected errorcodes for getSlicingConfig API.
Tests: Builds, Boots, RadioDataTest
Bug: 228996685
Change-Id: I10cf7b0b9ba09e56605d5a498ec48c4b8972f00b
