RAW boost key inside result and request metadata could be
absent depending on CameraHal. In case RAW boost range is
supported, the RAW boost value must always be present.
Bug: 34392075
Test: runtest -x
cts/tests/camera/src/android/hardware/camera2/cts/DngCreatorTest.java
Change-Id: I4c27b3fe5228ff604e3f2796abc670be5c17da67
CameraHal version 3.2 doesn't support cancel AE pre-capture
trigger. Camera request metadata that contains this value
needs to be overriden respectively. The corresponding results
also require the same kind of modification.
Bug: 34392075
Test: runtest -x
cts/tests/camera/src/android/hardware/camera2/cts/StillCaptureTest.java
-m testAePrecaptureTriggerCancelJpegCapture
Change-Id: If8bcf7e97ca8691cf890d5d6306d49dc3ddd087a
Older CameraHal versions are still using deprecated dataspace
definitions. Mapping between these dataspaces is needed to avoid
discrepancies.
Bug: 34392075
Test: Manual using camera application
Change-Id: I811dec879494445736b4e3731b2d516e396a9058
The camera-HAL implementation may need to communicate with other vendor
components over /dev/vndbinder. Route all libbinder traffic to that
node.
b/36651814
b/36651237
b/35870313
b/36683636
Test: sailfish
Change-Id: I9b80fefbcdf5ce18a2d788e8582ea8791a604435
Signed-off-by: Iliyan Malchev <malchev@google.com>
Revise IAllocator and IMapper to reduce IPC and to support gralloc0
devices.
Specifically, IAllocator is trimmed down to have essentially only
allocate(BufferDescriptor descriptor, uint32_t count)
generates (Error error,
uint32_t stride,
vec<handle> buffers);
The ability to allocate buffers with shared backing store is
removed. ProducerUsage and ConsumerUsage are moved to the
graphics.common package and are merged and renamed to BufferUsage.
BufferUsage's bits follow gralloc0.
IMapper gains
typedef vec<uint32_t> BufferDescriptor;
createDescriptor(BufferDescriptorInfo descriptorInfo)
generates (Error error,
BufferDescriptor descriptor);
where BufferDescriptor is an implementation-defined blob. lockFlex
is replaced by lockYCbCr. All getters are removed.
Reference counting with retain/release is replaced by
importBuffer/freeBuffer.
Most if not all gralloc1 features are not used by the runtime yet.
There is also not too much test written for them. As such, they
tend to behave differently between implementations and cannot be
used reliably.
Bug: 36481301
Test: builds and boots on Pixel
Change-Id: I1d31105120517ea2c128c7a19297acf3bfd312bb
Files relying on transitive include of utils/Log.h (and things that it
includes) from MQDescriptor.h
Test: pass
Merged-In: Iff316b21bef556bb026378b7f89e97ded3febef4
Change-Id: Iff316b21bef556bb026378b7f89e97ded3febef4
The match will use iterators that will be invalidated when the
used string input goes out of scope. Refactor the API to return
the two components of the match.
Bug: 36871785
Test: m && m SANITIZE_TARGET=address
Change-Id: I2418541234a09e53856ea61e0fbc4b67d8036308
Otherwise some bits will be set incorrectly.
Also move device@1.0 to use ProducerUsageFlags instead of ProducerUsage,
and add a compatibility workaround to set the gralloc0 HW_CAMERA_ZSL flags
when ConsumerUsage::CAMERA is passed in.
Test: Camera CTS passes, updated VTS tests pass
Bug: 35215313
Change-Id: I981dc1a650f838f94d932944fe835fd267f2004d
Specify the HAL behavior when stream usage flag is combination for
multiple consumers.
Test: Compile
Bug: 33777818
Change-Id: I97e7bcc79ee36a395210c7cf8deefc4f175d3e07
Currently only batching high speed recording request/results.
Test: GCA slow motion recording working
Bug: 34899394
Change-Id: Id83b9d1cefe011391c86a5e7e898262a169cc9e7
Each concurrent camera device in use needs 1 thread to maintain
operational semantics, plus we probably need threads for sensor service
calls, misc camera service calls, etc.
Up thread count to 6. That should be enough for everybody.
Test: Camera still works on sailfish
Change-Id: I2262c69985756fbf762034663ce24f45bf7ce2f1
getDeviceVersion calls get_camera_info, which could contain vendor tags.
As a result, we need to set up vendor tag before that.
Test: Verify vendor tag in static metadata works.
Bug: 33641150
Change-Id: Id4cfea52235542b19170a757b4c6bea3ad1d190d
* changes:
Camera: Check for transport errors during VTS
Camera: Add Hal version 1 get-/setParameter tests
Camera: Add Hal version 1 sendcommand tests
Camera: Add Hal version 1 autofocus test cases
Camera: Add Hal version 1 video recording test cases
Camera: Add Hal version 1 image capture test cases
Camera: Add device ver. 1 preview test cases
Camera: Extend camera test cases for camera 1.0 devices
Camera: Add flush test cases
Camera: Enable and check for torch callbacks
- Check for transport errors during IPC calls.
- Some code clean up and refactoring.
BUG: 32022758
Test: compile and run the gtest binary on device
Change-Id: I71f96704f82db629d1982997940d8d1b7525ffea
Tests are required for checking the basic camera parameters
functionality.
BUG: 32022758
Test: compile and run the gtest binary on device
Change-Id: I5725fef0bb4f5ac08ecae94def5cae66a640409a
Tests are needed for verifying 'sendCommand' API call.
Several new test cases will be available:
"sendCommandFaceDetection" - This will check whether face detection is
available and try to enable&disable it.
"sendCommandSmoothZoom" - Will try to verify whether smooth zoom can
be enabled&disabled in case the camera supports it.
BUG: 32022758
Test: compile and run the gtest binary on device
Change-Id: Ib56f363126907f24b1af04187b093aa6c8e8ac99
Tests should be available for autofocus verification. The new
cases include:
"autoFocus" - Check whether the camera supports autofocus. In case
auto is supported it will continue and test all available modes that
allow 'autoFocus' calls.
"cancelAutoFocus" - In case auto is supported, the test will trigger
full AF scan and cancel it immediately.
'CameraParameters' functionality is also required and should be included.
BUG: 32022758
Test: compile and run the gtest binary on device
Change-Id: I3bef25c5fdb6bbfa87517e6d255e4e6e01544d7d
Now cameraservice only sends one shutter notify and capture result to
the application per batch. Update the HAL interface doc to reflect this.
Test: Compiles
Bug: 35775704
Change-Id: I3a7967f0342213699989c70f485b379ccb94a1ff
Tests involving Hal version 1 video recording APIs are
required. Several cases will be available:
- 'startStopRecording' - Verifies basic video recording
functionality. Metadata support will be tested if available.
- 'startRecordingFail' - Checks that recording can be enabled
only after preview starts.
Bug: 32022758
Test: compile and run the gtest binary on device
Change-Id: Id9dd8d3a554a1aa3bbbae9b836e4d14da5c4446b
Tests involving Hal version 1 image capture APIs are
required. Several cases cover this:
- 'takePicture' - Regular image capture after preview gets enabled.
- 'takePictureFail' - Checks correct behavior in case preview is not
running.
- 'cancelPicture' - Verifies that image capture can be cancelled.
- 'cancelPictureFail' - Checks that image capture cancel fails as
expected in case 'takePicture' didn't get called.
Switch to BufferItemConsumer instead of CpuConsumer and use GLConsumer
default usage flags.
Bug: 32022758
Test: compile and run the gtest binary on device
Change-Id: I8db60aa8a21b6f829574fc9538da5644a4051e49
Test cases enabling/disabling preview using version 1
camera devices are needed. Test case is also available
for "setPreviewWindow".
BUG: 32022758
Test: compile and run the gtest binary on device
Change-Id: I234881fe940309dbb6ac11bfee7d01cc76d09f59
Test cases involving camera version 1.0 devices are
required. The API methods which overlap between 3.x and 1.0
devices should be considered in the respective test cases.
BUG: 32022758
Test: compile and run the gtest binary on device
Change-Id: I044b6586b812aed14d66867d51f97123addcd718
Camera should flush pending requets and buffers
correctly. Two new test cases will help with
the verification of this method:
- 'flushPreviewRequest' - Constructs a valid camera request
and sends it to camera. The test will not wait for the request
to complete instead it will call flush immediately. The results
and notifications that follow are checked for consistency with
expected behavior.
- 'flushEmpty' - Triggers flush without any pending request. Check
whether the camera behaves as expected.
BUG: 32022758
Test: compile and run the gtest binary on device
Change-Id: Iab9e37b3864491f970a783a68952a9c0c1703520
The expected torch callbacks can be verified during
the torch set test.
BUG: 32022758
Test: compile and run the gtest binary on device
Change-Id: Idaa1a4c6eb5306f1a2e1d126f54fcb26aaa1dc7c
