Do not rely on blocking behavior of 'IStreamOut.write',
instead use stream callbacks. Measure the time between
write start and drain complete. This makes the test
working reliably across different chipsets.
Bug: 219767875
Test: atest VtsHalAudioV7_0TargetTest:CompressedOffloadOutputStream/CompressedOffloadOutputStreamTest
Test: atest VtsHalAudioV7_1TargetTest:CompressedOffloadOutputStream/CompressedOffloadOutputStreamTest
Change-Id: I26fd4fd26914ed2a0b3273f4ae5512a87f9cca2c
Merged-In: I26fd4fd26914ed2a0b3273f4ae5512a87f9cca2c
(cherry picked from commit a0a5d4a9f6)
Update CompressedOffloadOutputStream to fail the test if
compressed offload mix port does not support gapless offload
for a new device launching on T+.
Bug: 219767875
Test: atest VtsHalAudioV7_0TargetTest
Test: atest VtsHalAudioV7_1TargetTest
Change-Id: Iaadf6e9b9bb7340ccaf5bc26c45fda9654190510
Merged-In: Iaadf6e9b9bb7340ccaf5bc26c45fda9654190510
(cherry picked from commit 1bc0dc4ceb)
Two changes that are necessary to test offloaded output:
1. Pass all mix port flags specified in the config to HAL when
opening an output stream. Previously the generator was
omitting the 'NON_BLOCKING' flag, however it is necessary
for offloaded output to work. This also now passes
the 'GAPLESS_OFFLOAD' flag to the stream opening call site.
2. Provide the DeviceAddress of the attached source/sink
device to tests that use mix ports. Some tests were looking
up the device address anyway. Also, HAL implementations
seem to prefer to have the actual output device instead
of 'DEFAULT' when opening offload streams.
Bug: 219767875
Test: atest VtsHalAudioV7_0TargetTest
Test: atest VtsHalAudioV7_1TargetTest
Test: atest HalAudioV7_0GeneratorTest
Change-Id: I0482376ecc7d6964f45f508a80716ffab18044b4
Merged-In: I0482376ecc7d6964f45f508a80716ffab18044b4
(cherry picked from commit 713d2c5590)
When opening a stream on an ultrasound input
(AUDIO_INPUT_FLAG_ULTRASOUND), the source type
AUDIO_SOURCE_ULTRASOUND must be used.
Bug: 231275185
Test: atest VtsHalAudioV7_0TargetTest
Test: atest VtsHalAudioV7_1TargetTest
Change-Id: Ib1fb5b8218eb0c52edf31789fa937c0a8b6c5082
Merged-In: Ib1fb5b8218eb0c52edf31789fa937c0a8b6c5082
(cherry picked from commit 1ce9d5488a)
TV devices can list a lot of configurations and have low
performing CPUs which causes the test to run for a significant
amount of time. From b/229824670 it seems that 10 minutes
should be enough.
Bug: 229824670
Test: atest VtsHalAudioV6_0TargetTest
Test: atest VtsHalAudioV7_0TargetTest
Test: atest VtsHalAudioV7_1TargetTest
Change-Id: Id7fa8eaa98bf2437fd1f676b9e5a7290df260fbd
(cherry picked from commit 0b9b03eb71)
Merged-In: Id7fa8eaa98bf2437fd1f676b9e5a7290df260fbd
Align the behavior of minor version mismatch with the behavior
of major version mismatch. For example, trying to run VTS test
intended for V7.0 on a device with V7.1 yields no results,
similar to what happens when running a V6.0 test on V7.0 device.
This is done to avoid test failures when the device uses
features added by V7.1 in the APM XML config.
Bug: 227150535
Test: atest VtsHalAudioV7_0TargetTest
Test: atest VtsHalAudioV7_1TargetTest
Change-Id: I8ad6595a221f0bc9aedea057f27a75c172954da5
* Timed out runs do not show any warning messages.
* These test files cannot finish clang-tidy runs with
the following settings:
TIDY_TIMEOUT=90
WITH_TIDY=1
CLANG_ANALYZER_CHECKS=1
* When TIDY_TIMEOUT is set, in Android continuous builds,
tidy_timeout_srcs files will not be compiled by clang-tidy.
When developers build locally without TIDY_TIMEOUT,
tidy_timeout_srcs files will be compiled.
* Some of these test modules may be split into smaller ones,
or disable some time consuming checks, and then
enable clang-tidy to run within limited time.
Bug: 201099167
Test: make droid tidy-hardware-interfaces_subset
Change-Id: I1de28f1572fff368f67eab512fffec9f2e5c2a9b
Straighten out logic in DeviceManager for proper handling
of IPrimaryDevice and IDevice instances across all supported
HAL versions.
This fixes a recently introduced bug which was causing
the same HAL device to be opened twice in a row, and then closed
twice.
Bug: 218610286
Test: atest VtsHalAudioV7_0TargetTest
Test: atest VtsHalAudioV7_1TargetTest
Change-Id: I415cbadae9d325ac63160e49e5e638906c8c63fd
(cherry picked from commit 285c0a041c)
Merged-In: I415cbadae9d325ac63160e49e5e638906c8c63fd
android.hardware.audio.common@7.1-util and
android.hardware.audio@7.1-util utilize the 7.1 XSD enums
conversion library and thus can work with the new
enum strings added in 7.1
Bug: 218504031
Test: atest VtsHalAudioV7_1TargetTest
Test: atest android.hardware.audio.common@7.0-util_tests
Test: atest android.hardware.audio.common@7.1-util_tests
Test: atest android.hardware.audio@7.0-util_tests
Test: atest android.hardware.audio@7.1-util_tests
Change-Id: Icc5a354cdc2e377a2a2424c28377bcb0ba05bf4e
(cherry picked from commit fa4a4f8da7)
Merged-In: Icc5a354cdc2e377a2a2424c28377bcb0ba05bf4e
This has turned out to be an empty interface. By removing
it we save about 100 kB in the interface code.
Bug: 217752112
Test: atest VtsHalAudioV7_1TargetTest
Change-Id: I2522653600a254ddcf2c4eac8bed1df69ac11d3d
(cherry picked from commit 893ea21681)
Merged-In: I2522653600a254ddcf2c4eac8bed1df69ac11d3d
This is an updated version of IDevice.setConnectedState which
accepts a full AudioPort so that additional data like extra
audio descriptors can be passed to the audio HAL.
Bug: 211601178
Test: atest VtsHalAudioV7_1TargetTest
Change-Id: Id746caa32122dabfb83feb5b515bed7717bcb67c
(cherry picked from commit 533f78f411)
Merged-In: Id746caa32122dabfb83feb5b515bed7717bcb67c
Straighten out logic in DeviceManager for proper handling
of IPrimaryDevice and IDevice instances across all supported
HAL versions.
This fixes a recently introduced bug which was causing
the same HAL device to be opened twice in a row, and then closed
twice.
Bug: 218610286
Test: atest VtsHalAudioV7_0TargetTest
Test: atest VtsHalAudioV7_1TargetTest
Change-Id: I415cbadae9d325ac63160e49e5e638906c8c63fd
android.hardware.audio.common@7.1-util and
android.hardware.audio@7.1-util utilize the 7.1 XSD enums
conversion library and thus can work with the new
enum strings added in 7.1
Bug: 218504031
Test: atest VtsHalAudioV7_1TargetTest
Test: atest android.hardware.audio.common@7.0-util_tests
Test: atest android.hardware.audio.common@7.1-util_tests
Test: atest android.hardware.audio@7.0-util_tests
Test: atest android.hardware.audio@7.1-util_tests
Change-Id: Icc5a354cdc2e377a2a2424c28377bcb0ba05bf4e
Provide instantiation statements for the new tests.
Bug: 210803914
Test: atest VtsHalAudioV7_1TargetTest
Change-Id: I4ed95be6e50a9dcd1362a87ec120e66abea659b6
Add APis for controlling the latency mode on an output stream.
Latency mode control is optional but mandated if spatial audio with
head tracking is supported over Bluetooth classic audio link.
Bug: 187446271
Test: m android.hardware.audio@7.1-impl
Change-Id: I363db3bf7f7b6439e326d0f6f4becc10b3947e7d
(cherry picked from commit 040984fd44)
Merged-In: I363db3bf7f7b6439e326d0f6f4becc10b3947e7d
Mechanical updates from global greps. Updated test code
to use new methods from V7.1.
Added missing checks for null pointers in
PcmOnlyConfig...StreamTest::releasePatchIfNeeded for V7.
Bug: 214426419
Test: atest VtsHalAudioV7_1TargetTest
Change-Id: Id3a99993bf2ee0c87d44f668d759f7c10db9a435
(cherry picked from commit 40fde0bc07)
Merged-In: Id3a99993bf2ee0c87d44f668d759f7c10db9a435
Split versions of "common" and "core" types from
the version of the interfaces. "Common" and "core"
versions are set to 7.0.
Implemented new methods of V7.1 interfaces.
Bug: 214426419
Test: m android.hardware.audio@7.1-impl
Test: m android.hardware.audio@7.0-impl
Test: m android.hardware.audio.effect@7.0-impl
Test: m android.hardware.audio@6.0-impl
Change-Id: Ic4c44d4ac9bbfa7b62695866b9aa7473658390b2
(cherry picked from commit 7d01538eec)
Merged-In: Ic4c44d4ac9bbfa7b62695866b9aa7473658390b2
Add test cases for latency mode control APIs in V7.1 VTS.
Bug: 210803914
Test: atest VtsHalAudioV7_1TargetTest
Change-Id: I22691f97a5c9b54f4fdec0c5cd2bd64486d0dd76
This has turned out to be an empty interface. By removing
it we save about 100 kB in the interface code.
Bug: 217752112
Test: atest VtsHalAudioV7_1TargetTest
Change-Id: I2522653600a254ddcf2c4eac8bed1df69ac11d3d
This is an updated version of IDevice.setConnectedState which
accepts a full AudioPort so that additional data like extra
audio descriptors can be passed to the audio HAL.
Bug: 211601178
Test: atest VtsHalAudioV7_1TargetTest
Change-Id: Id746caa32122dabfb83feb5b515bed7717bcb67c
Add APis for controlling the latency mode on an output stream.
Latency mode control is optional but mandated if spatial audio with
head tracking is supported over Bluetooth classic audio link.
Bug: 187446271
Test: m android.hardware.audio@7.1-impl
Change-Id: I363db3bf7f7b6439e326d0f6f4becc10b3947e7d
Allow IDevice.setConnectedState to return NOT_SUPPORTED
when invalid device address is passed in.
Bug: 214426419
Test: atest VtsHalAudioV7_0TargetTest
Change-Id: I5084cbeedc10696e215c8decc235433849c3bfce
Mechanical updates from global greps. Updated test code
to use new methods from V7.1.
Added missing checks for null pointers in
PcmOnlyConfig...StreamTest::releasePatchIfNeeded for V7.
Bug: 214426419
Test: atest VtsHalAudioV7_1TargetTest
Change-Id: Id3a99993bf2ee0c87d44f668d759f7c10db9a435
Split versions of "common" and "core" types from
the version of the interfaces. "Common" and "core"
versions are set to 7.0.
Implemented new methods of V7.1 interfaces.
Bug: 214426419
Test: m android.hardware.audio@7.1-impl
Test: m android.hardware.audio@7.0-impl
Test: m android.hardware.audio.effect@7.0-impl
Test: m android.hardware.audio@6.0-impl
Change-Id: Ic4c44d4ac9bbfa7b62695866b9aa7473658390b2
V6 and V7 use actual device audio configuration
when testing I/O streams functionality. On low-end
TV devices this can cause the test to run for
significant time due to lower CPU speed and the
amount of multichannel configurations.
From testing on real devices, the timeout value
of 5 minutes seems to be adequate.
Bug: 211945822
Test: atest VtsHalAudioV6_0TargetTest
Change-Id: Ie233e014f9f3650f58319c4d5f5a836cfdea87ba
V6 and V7 use the audio policy configuration file for generating
the set of test profiles. The generator must only take into
account profiles of mix ports that are routed to device ports of
attached devices. Otherwise the HAL can rightfully refuse
to create a stream for the profile when the device isn't attached.
Bug: 205808571
Test: atest HalAudioV6_0GeneratorTest
Test: atest HalAudioV7_0GeneratorTest
Test: atest VtsHalAudioV6_0TargetTest
Test: atest VtsHalAudioV7_0TargetTest
Change-Id: I798f978c1c0bc32831c20e4b08338b462d8eea16
The profiles generator wasn't loading correctly from the Audio
Policy Manager config file profiles with unpopulated attributes,
which is typical for dynamic profiles.
Bug: 204314749
Test: atest HalAudioV7_0GeneratorTest
Change-Id: I514a4e03da165cacb5dbaaa16470130895681484
Each VTS module is required to have OWNERS file. The ownership is based on
go/vts-owners. For more information about ownership policy, please visit
go/xts-owners-policy.
Test: Tree Hugger
Bug: 143903671
Change-Id: I743c12b239732c85cecb421b4b4ee4ebcf36074a
Since tests depend statically on libaudiofoundation,
they also need to depend on the generated interfaces code,
which contains vtables for interface classes.
Update 'sthal_cli_3' test app.
Bug: 188932434
Test: m HalAudioV6_0GeneratorTest
Test: m sthal_cli_3
Change-Id: Ifb8f81d02764f7710ce207603aa6fe2d20123e89
