On a low-end device which does not support STA-SAP concurrency, if STA
is currently enabled and user/app tries to enable SAP, then Wi-Fi needs
to reconfigure and stop Wi-Fi HAL first. Among other stopping actions,
HAL needs to set global_handle_ to nullptr and send "Exit" to
wifi_event_loop then waits no more than kMaxStopCompleteWaitMs. If the
wait times out, then reconfiguration fails and causes Wi-Fi controller
returns to STA mode and creates new STA iface indirectly. In this
process, HAL needs to access global_handle_, but since it was cleared,
we can only get a Native Exception.
Because there is no proper error recovery for UNKNOWN errors, I suggest
to simply set kMaxStopCompleteWaitMs to a higher value to circumvent
this timing issue.
Bug: 173760638
Change-Id: I1b5a0a7a554409704c017ffaf52a767b9424c61e
The logic to skip the p2p tests on non-p2p devices appear to have
inadventently flipped since d6436731.
Bug: 173134041
Test: atest VtsHalWifiSupplicantV1_1TargetTest
Change-Id: I7945950e8483241e47e308a2c5ad97571d74a769
Fix VtsHalWifiSupplicantP2pV1_0TargetTest to skip tests
in such a way that VTS reports the module as complete on
devices that don't support Wifi Direct.
Bug: 170326147
Test: run vts -m VtsHalWifiSupplicantP2pV1_0TargetTest
Change-Id: Ia418c4bb72f4772422d724636453395c4ba9fb2d
We don't need to test supplicant in the presence of vendor HAL & without
it. For a given device, this behavior is fixed.
Bug: 161951052
Test: atest VtsHalWifiSupplicantV1_1TargetTest
Merged-In: I71097c3afef1765ca514abf2c350c423e3999020
Change-Id: I71097c3afef1765ca514abf2c350c423e3999020
(cherry picked from commit 984b6e0607)
aosp/1427815 add invoke terminate function in teardown function.
It will cause Create Test case fail since Create killed global hostapd_
service to re-generate the local one.
Use global hostapd_ to replace local variable to make teardown function
work normally.
Bug: 169248773
Test: atest -c VtsHalWifiHostapdV1_2TargetTest
Test: atest -c VtsHalWifiHostapdV1_1TargetTest
Test: atest -c VtsHalWifiHostapdV1_0TargetTest
Change-Id: I6300a626db76e68873bbc34c489a9a8ee2d55e7a
When OEM register different hostapd instance without update the StopHostapd.
It will cause VTS clean fail because hostapd process name is the new
one.
Call terminate to request clean HAL state.
Bug: 161682236
Bug: 167636313
Test: atest -c VtsHalWifiHostapdV1_2TargetTest
Test: atest -c VtsHalWifiHostapdV1_1TargetTest
Test: atest -c VtsHalWifiHostapdV1_0TargetTest
Change-Id: If56e5b5351abd31865150bdf97d27674dbbc4257
Added test for 2 sided RTT.
Added RTT measurement type capability check in range request tests.
Bug: 163327074
Test: vts test - VtsHalWifiRttV1_4TargetTest
Change-Id: I546806605b6b3ecd124068fc81b9fb275b745f45
(cherry picked from commit d85edb7f66)
The stopHostapd uses vendor HAL HIDL interface.
The interface name should use wifi_instance.
Bug: 161682236
Test: atest VtsHalWifiHostapdV1_2TargetTest
Change-Id: I8215cba3e2a36f48863f57e199684c7446e20692
Merged-In: I8215cba3e2a36f48863f57e199684c7446e20692
Switch away from using wifi's custom implementation to block for
supplicant/hostapd daemon to come up.
Bug: 161682236
Test:
vts-tradefed run commandAndExit vts --module VtsHalWifiHostapdV1_0Target
vts-tradefed run commandAndExit vts --module VtsHalWifiSupplicantV1_0Host
Change-Id: Ia05f93ba4a28c036315558edbba30f19c2e6ac95
(cherry picked from commit 6d0af445ee)
Pass one 2.4GHz channel (1) and one 5GHz channel(40) in
URI channel-list, so that devices which support only one band
can initiate Authentication.
Bug: 161331637
Test: VtsHalWifiSupplicantV1_2TargetTest
Test: VtsHalWifiSupplicantV1_3TargetTest
Change-Id: Ic2677c5f2c2bebe632f823f0472da0a5ae404c0d
(cherry picked from commit 6b75eeb045)
Switch away from using wifi's custom implementation to block for
supplicant/hostapd daemon to come up.
Bug: 161682236
Test:
vts-tradefed run commandAndExit vts --module VtsHalWifiHostapdV1_0Target
vts-tradefed run commandAndExit vts --module VtsHalWifiSupplicantV1_0Host
Change-Id: Ia05f93ba4a28c036315558edbba30f19c2e6ac95
Wifi VendorHAL is optional for STA mode to function.
Tests should be runnable even on devices without VendorHAL.
Bug: 148883970
Bug: 158343746
Test: run vts -m VtsHalWifiSupplicantV1_0Host
Signed-off-by: Oleh Cherpak <oleh.cherpak@globallogic.com>
Change-Id: Ife6e09e41ccfd6c3ccbdc19394175d17986d310d
Merged-In: Ife6e09e41ccfd6c3ccbdc19394175d17986d310d
Wifi VendorHAL is optional for Soft AP mode to function.
Tests should be runnable even on devices without VendorHAL.
Test: run vts -m VtsHalWifiHostapdV1_1Target
Bug: 148907288
Bug: 158343986
Signed-off-by: Oleh Cherpak <oleh.cherpak@globallogic.com>
Change-Id: Id65d09d39d93e540a24e58fda233fd2faf8c3258
Merged-In: Id65d09d39d93e540a24e58fda233fd2faf8c3258
HIDL libs are not necessarily part of VNDK now. Because some are
used by VNDK libs, they are still VNDK. But rest are now just
vendor-available.
.hidl_for_test files are also removed because they are used to exclude
test-purpose hidl libs from VNDK libs.
Instead, .hidl_for_system_ext files are added to tests/lazy to
distinguish them from others which are installed /system.
Bug: 143933769
Test: update-makefiles.sh && m com.android.vndk.current
Merged-In: Ia81312dda340b6b5cbdd7a3c21e1d323bda39a4a
Change-Id: Ia81312dda340b6b5cbdd7a3c21e1d323bda39a4a
(cherry picked from commit b0907a6bb8)
HIDL libs are not necessarily part of VNDK now. Because some are
used by VNDK libs, they are still VNDK. But rest are now just
vendor-available.
.hidl_for_test files are also removed because they are used to exclude
test-purpose hidl libs from VNDK libs.
Instead, .hidl_for_system_ext files are added to tests/lazy to
distinguish them from others which are installed /system.
Bug: 143933769
Test: update-makefiles.sh && m com.android.vndk.current
Merged-In: Ia81312dda340b6b5cbdd7a3c21e1d323bda39a4a
Change-Id: Ia81312dda340b6b5cbdd7a3c21e1d323bda39a4a
(cherry picked from commit b0907a6bb8)
Wi-Fi Direct might not be supported, the test runner should
check it first before running tests.
Bug: 155372909
Test: * atest VtsHalWifiSupplicantP2pV1_2TargetTest
* remove Wi-Fi Direct support in device.mk
atest VtsHalWifiSupplicantP2pV1_2TargetTest
Change-Id: Ie32b5fb831eebba818b83a9b9855e8a66b929e3d
Some vendors implementation will reset wifi chip when doing interface
down.
Accordingly, We need to avoid the interface down/up when doing
setMacAddress to avoid loss of sync between framework and firmware.
This commit uses a BOARD_WIFI_AVOID_IFACE_RESET_MAC_CHANGE macro to
check if it is needed to avoid interface down/up at setMacAddress.
Bug: 153771961
Test: VTS Test
Test: atest VtsHalWifiV1_2TargetTest
Change-Id: I971764f1c272ebfd245959974fa0d1b10ba7c39b
The first test would always fail because it tries to
use system-initiating supplicant process.
Bug: 155257934
Test: atest VtsHalWifiSupplicantV1_3TargetTest
Change-Id: I79b69ec04faab5e8f2af0e5e3a9b1cc4c3aa0c36
