/*
 * Copyright 2016 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

package android.hardware.wifi@1.0;

import IWifiChipEventCallback;
import IWifiIface;
import IWifiApIface;
import IWifiNanIface;
import IWifiP2pIface;
import IWifiStaIface;
import IWifiRttController;

/**
 * Interface that represents a chip that must be configured as a single unit.
 * The HAL/driver/firmware will be responsible for determining which phy is used
 * to perform operations like NAN, RTT, etc.
 */
interface IWifiChip {
  /**
   * Set of interface types with the maximum number of interfaces that can have
   * one of the specified type for a given ChipIfaceCombination. See
   * ChipIfaceCombination for examples.
   */
  struct ChipIfaceCombinationLimit {
    vec<IfaceType> types; // Each IfaceType must occur at most once.
    uint32_t maxIfaces;
  };

  /**
   * Set of interfaces that can operate concurrently when in a given mode. See
   * ChipMode below.
   *
   * For example:
   *   [{STA} <= 2]
   *       At most two STA interfaces are supported
   *       [], [STA], [STA+STA]
   *
   *   [{STA} <= 1, {NAN} <= 1, {AP} <= 1]
   *       Any combination of STA, NAN, AP
   *       [], [STA], [NAN], [AP], [STA+NAN], [STA+AP], [NAN+AP], [STA+NAN+AP]
   *
   *   [{STA} <= 1, {NAN,P2P} <= 1]
   *       Optionally a STA and either NAN or P2P
   *       [], [STA], [STA+NAN], [STA+P2P], [NAN], [P2P]
   *       Not included [NAN+P2P], [STA+NAN+P2P]
   *
   *   [{STA} <= 1, {STA,NAN} <= 1]
   *       Optionally a STA and either a second STA or a NAN
   *       [], [STA], [STA+NAN], [STA+STA], [NAN]
   *       Not included [STA+STA+NAN]
   */
  struct ChipIfaceCombination {
    vec<ChipIfaceCombinationLimit> limits;
  };

  /**
   * A mode that the chip can be put in. A mode defines a set of constraints on
   * the interfaces that can exist while in that mode. Modes define a unit of
   * configuration where all interfaces must be torn down to switch to a
   * different mode. Some HALs may only have a single mode, but an example where
   * multiple modes would be required is if a chip has different firmwares with
   * different capabilities.
   *
   * When in a mode, it must be possible to perform any combination of creating
   * and removing interfaces as long as at least one of the
   * ChipIfaceCombinations is satisfied. This means that if a chip has two
   * available combinations, [{STA} <= 1] and [{AP} <= 1] then it is expected
   * that exactly one STA interface or one AP interface can be created, but it
   * is not expected that both a STA and AP interface could be created. If it
   * was then there would be a single available combination
   * [{STA} <=1, {AP} <= 1].
   *
   * When switching between two available combinations it is expected that
   * interfaces only supported by the initial combination must be removed until
   * the target combination is also satisfied. At that point new interfaces
   * satisfying only the target combination can be added (meaning the initial
   * combination limits will no longer satisfied). The addition of these new
   * interfaces must not impact the existence of interfaces that satisfy both
   * combinations.
   *
   * For example, a chip with available combinations:
   *     [{STA} <= 2, {NAN} <=1] and [{STA} <=1, {NAN} <= 1, {AP} <= 1}]
   * If the chip currently has 3 interfaces STA, STA and NAN and wants to add an
   * AP interface in place of one of the STAs then first one of the STA
   * interfaces must be removed and then the AP interface can be created after
   * the STA had been torn down. During this process the remaining STA and NAN
   * interfaces must not be removed/recreated.
   *
   * If a chip does not support this kind of reconfiguration in this mode then
   * the combinations must be separated into two separate modes. Before
   * switching modes all interfaces must be torn down, the mode switch must be
   * enacted and when it completes the new interfaces must be brought up.
   */
  struct ChipMode {
    /**
     * Id that can be used to put the chip in this mode.
     */
    ChipModeId id;

    /**
     * A list of the possible interface combinations that the chip can have
     * while in this mode.
     */
    vec<ChipIfaceCombination> availableCombinations;
  };

  /**
   * Information about the version of the driver and firmware running this chip.
   *
   * The information in these ASCII strings are vendor specific and does not
   * need to follow any particular format. It may be dumped as part of the bug
   * report.
   */
  struct ChipDebugInfo {
    string driverDescription;
    string firmwareDescription;
  };

  /**
   * Capabilities exposed by this chip.
   */
  enum ChipCapabilityMask : uint32_t {
    /**
     * Memory dump of Firmware.
     */
    DEBUG_MEMORY_FIRMWARE_DUMP = 1 << 0,
    /**
     * Memory dump of Driver.
     */
    DEBUG_MEMORY_DRIVER_DUMP = 1 << 1,
    /**
     * Connectivity events reported via debug ring buffer.
     */
    DEBUG_RING_BUFFER_CONNECT_EVENT = 1 << 2,
    /**
     * Power events reported via debug ring buffer.
     */
    DEBUG_RING_BUFFER_POWER_EVENT = 1 << 3,
    /**
     * Wakelock events reported via debug ring buffer.
     */
    DEBUG_RING_BUFFER_WAKELOCK_EVENT = 1 << 4,
    /**
     * Vendor data reported via debug ring buffer.
     * This mostly contains firmware event logs.
     */
    DEBUG_RING_BUFFER_VENDOR_DATA = 1 << 5,
    /**
     * Host wake reasons stats collection.
     */
    DEBUG_HOST_WAKE_REASON_STATS = 1 << 6,
    /**
     * Error alerts.
     */
    DEBUG_ERROR_ALERTS = 1 << 7
  };

  /**
   * Get the id assigned to this chip.
   *
   * @return status WifiStatus of the operation.
   *         Possible status codes:
   *         |WifiStatusCode.SUCCESS|,
   *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|
   * @return id Assigned chip Id.
   */
  getId() generates (WifiStatus status, ChipId id);

  /**
   * Requests notifications of significant events on this chip. Multiple calls
   * to this must register multiple callbacks each of which must receive all
   * events.
   *
   * @param callback An instance of the |IWifiChipEventCallback| HIDL interface
   *        object.
   * @return status WifiStatus of the operation.
   *         Possible status codes:
   *         |WifiStatusCode.SUCCESS|,
   *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|
   */
  registerEventCallback(IWifiChipEventCallback callback) generates (WifiStatus status);

  /**
   * Get the capabilities supported by this chip.
   *
   * @return status WifiStatus of the operation.
   *         Possible status codes:
   *         |WifiStatusCode.SUCCESS|,
   *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
   *         |WifiStatusCode.ERROR_NOT_AVAILABLE|,
   *         |WifiStatusCode.ERROR_UNKNOWN|
   * @return capabilities Bitset of |ChipCapabilityMask| values.
   */
  getCapabilities()
      generates (WifiStatus status, bitfield<ChipCapabilityMask> capabilities);

  /**
   * Get the set of operation modes that the chip supports.
   *
   * @return status WifiStatus of the operation.
   *         Possible status codes:
   *         |WifiStatusCode.SUCCESS|,
   *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|
   * @return modes List of modes supported by the device.
   */
  getAvailableModes() generates (WifiStatus status, vec<ChipMode> modes);

  /**
   * Reconfigure the Chip.
   * Any existing |IWifiIface| objects must be marked invalid after this call.
   * If this fails then the chips is now in an undefined state and
   * configureChip must be called again.
   * Must trigger |IWifiChipEventCallback.onChipReconfigured| on success.
   * Must trigger |IWifiEventCallback.onFailure| on failure.
   *
   * @param modeId The mode that the chip must switch to, corresponding to the
   *        id property of the target ChipMode.
   * @return status WifiStatus of the operation.
   *         Possible status codes:
   *         |WifiStatusCode.SUCCESS|,
   *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
   *         |WifiStatusCode.ERROR_NOT_AVAILABLE|,
   *         |WifiStatusCode.ERROR_UNKNOWN|
   */
  configureChip(ChipModeId modeId) generates (WifiStatus status);

  /**
   * Get the current mode that the chip is in.
   *
   * @return modeId The mode that the chip is currently configured to,
   *         corresponding to the id property of the target ChipMode.
   * @return status WifiStatus of the operation.
   *         Possible status codes:
   *         |WifiStatusCode.SUCCESS|,
   *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|
   */
  getMode() generates (WifiStatus status, ChipModeId modeId);

  /**
   * Request information about the chip.
   *
   * @return status WifiStatus of the operation.
   *         Possible status codes:
   *         |WifiStatusCode.SUCCESS|,
   *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
   *         |WifiStatusCode.ERROR_NOT_AVAILABLE|,
   *         |WifiStatusCode.ERROR_UNKNOWN|
   * @return chipDebugInfo Instance of |ChipDebugInfo|.
   */
  requestChipDebugInfo() generates (WifiStatus status, ChipDebugInfo chipDebugInfo);

  /**
   * Request vendor debug info from the driver.
   *
   * @return status WifiStatus of the operation.
   *         Possible status codes:
   *         |WifiStatusCode.SUCCESS|,
   *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
   *         |WifiStatusCode.ERROR_NOT_AVAILABLE|,
   *         |WifiStatusCode.ERROR_UNKNOWN|
   * @param blob Vector of bytes retrieved from the driver.
   */
  requestDriverDebugDump() generates (WifiStatus status, vec<uint8_t> blob);

  /**
   * Request vendor debug info from the firmware.
   *
   * @return status WifiStatus of the operation.
   *         Possible status codes:
   *         |WifiStatusCode.SUCCESS|,
   *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
   *         |WifiStatusCode.ERROR_NOT_AVAILABLE|,
   *         |WifiStatusCode.ERROR_UNKNOWN|
   * @param blob Vector of bytes retrieved from the driver.
   */
  requestFirmwareDebugDump() generates (WifiStatus status, vec<uint8_t> blob);

  /**
   * Create an AP iface on the chip.
   *
   * Depending on the mode the chip is configured in, the interface creation
   * may fail (code: |ERROR_NOT_AVAILABLE|) if we've already reached the maximum
   * allowed (specified in |ChipIfaceCombination|) number of ifaces of the AP
   * type.
   *
   * @return status WifiStatus of the operation.
   *         Possible status codes:
   *         |WifiStatusCode.SUCCESS|,
   *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
   *         |WifiStatusCode.ERROR_NOT_SUPPORTED|
   * @return iface HIDL interface object representing the iface if
   *         successful, null otherwise.
   */
  createApIface() generates (WifiStatus status, IWifiApIface iface);

  /**
   * List all the AP iface names configured on the chip.
   * The corresponding |IWifiApIface| object for any iface are
   * retrieved using |getApIface| method.
   *
   * @return status WifiStatus of the operation.
   *         Possible status codes:
   *         |WifiStatusCode.SUCCESS|,
   *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|
   * @return ifnames List of all AP iface names on the chip.
   */
  getApIfaceNames() generates (WifiStatus status, vec<string> ifnames);

  /**
   * Gets a HIDL interface object for the AP Iface corresponding
   * to the provided ifname.
   *
   * @param ifname Name of the iface.
   * @return status WifiStatus of the operation.
   *         Possible status codes:
   *         |WifiStatusCode.SUCCESS|,
   *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
   *         |WifiStatusCode.ERROR_INVALID_ARGS|
   * @return iface HIDL interface object representing the iface if
   *         it exists, null otherwise.
   */
  getApIface(string ifname) generates (WifiStatus status, IWifiApIface iface);

  /**
   * Removes the AP Iface with the provided ifname.
   * Any further calls on the corresponding |IWifiApIface| HIDL interface
   * object must fail.
   *
   * @param ifname Name of the iface.
   * @return status WifiStatus of the operation.
   *         Possible status codes:
   *         |WifiStatusCode.SUCCESS|,
   *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
   *         |WifiStatusCode.ERROR_INVALID_ARGS|
   */
  removeApIface(string ifname) generates (WifiStatus status);

  /**
   * Create a NAN iface on the chip.
   *
   * Depending on the mode the chip is configured in, the interface creation
   * may fail (code: |ERROR_NOT_AVAILABLE|) if we've already reached the maximum
   * allowed (specified in |ChipIfaceCombination|) number of ifaces of the NAN
   * type.
   *
   * @return status WifiStatus of the operation.
   *         Possible status codes:
   *         |WifiStatusCode.SUCCESS|,
   *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
   *         |WifiStatusCode.ERROR_NOT_SUPPORTED|
   * @return iface HIDL interface object representing the iface if
   *         successful, null otherwise.
   */
  createNanIface() generates (WifiStatus status, IWifiNanIface iface);

  /**
   * List all the NAN iface names configured on the chip.
   * The corresponding |IWifiNanIface| object for any iface are
   * retrieved using |getNanIface| method.
   *
   * @return status WifiStatus of the operation.
   *         Possible status codes:
   *         |WifiStatusCode.SUCCESS|,
   *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|
   * @return ifnames List of all NAN iface names on the chip.
   */
  getNanIfaceNames() generates (WifiStatus status, vec<string> ifnames);

  /**
   * Gets a HIDL interface object for the NAN Iface corresponding
   * to the provided ifname.
   *
   * @param ifname Name of the iface.
   * @return status WifiStatus of the operation.
   *         Possible status codes:
   *         |WifiStatusCode.SUCCESS|,
   *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
   *         |WifiStatusCode.ERROR_INVALID_ARGS|
   * @return iface HIDL interface object representing the iface if
   *         it exists, null otherwise.
   */
  getNanIface(string ifname) generates (WifiStatus status, IWifiNanIface iface);

  /**
   * Removes the NAN Iface with the provided ifname.
   * Any further calls on the corresponding |IWifiNanIface| HIDL interface
   * object must fail.
   *
   * @param ifname Name of the iface.
   * @return status WifiStatus of the operation.
   *         Possible status codes:
   *         |WifiStatusCode.SUCCESS|,
   *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
   *         |WifiStatusCode.ERROR_INVALID_ARGS|
   */
  removeNanIface(string ifname) generates (WifiStatus status);

  /**
   * Create a P2P iface on the chip.
   *
   * Depending on the mode the chip is configured in, the interface creation
   * may fail (code: |ERROR_NOT_AVAILABLE|) if we've already reached the maximum
   * allowed (specified in |ChipIfaceCombination|) number of ifaces of the P2P
   * type.
   *
   * @return status WifiStatus of the operation.
   *         Possible status codes:
   *         |WifiStatusCode.SUCCESS|,
   *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
   *         |WifiStatusCode.ERROR_NOT_SUPPORTED|
   * @return iface HIDL interface object representing the iface if
   *         successful, null otherwise.
   */
  createP2pIface() generates (WifiStatus status, IWifiP2pIface iface);

  /**
   * List all the P2P iface names configured on the chip.
   * The corresponding |IWifiP2pIface| object for any iface are
   * retrieved using |getP2pIface| method.
   *
   * @return status WifiStatus of the operation.
   *         Possible status codes:
   *         |WifiStatusCode.SUCCESS|,
   *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|
   * @return ifnames List of all P2P iface names on the chip.
   */
  getP2pIfaceNames() generates (WifiStatus status, vec<string> ifnames);

  /**
   * Gets a HIDL interface object for the P2P Iface corresponding
   * to the provided ifname.
   *
   * @param ifname Name of the iface.
   * @return status WifiStatus of the operation.
   *         Possible status codes:
   *         |WifiStatusCode.SUCCESS|,
   *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
   *         |WifiStatusCode.ERROR_INVALID_ARGS|
   * @return iface HIDL interface object representing the iface if
   *         it exists, null otherwise.
   */
  getP2pIface(string ifname) generates (WifiStatus status, IWifiP2pIface iface);

  /**
   * Removes the P2P Iface with the provided ifname.
   * Any further calls on the corresponding |IWifiP2pIface| HIDL interface
   * object must fail.
   *
   * @param ifname Name of the iface.
   * @return status WifiStatus of the operation.
   *         Possible status codes:
   *         |WifiStatusCode.SUCCESS|,
   *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
   *         |WifiStatusCode.ERROR_INVALID_ARGS|
   */
  removeP2pIface(string ifname) generates (WifiStatus status);

  /**
   * Create an STA iface on the chip.
   *
   * Depending on the mode the chip is configured in, the interface creation
   * may fail (code: |ERROR_NOT_AVAILABLE|) if we've already reached the maximum
   * allowed (specified in |ChipIfaceCombination|) number of ifaces of the STA
   * type.
   *
   * @return status WifiStatus of the operation.
   *         Possible status codes:
   *         |WifiStatusCode.SUCCESS|,
   *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
   *         |WifiStatusCode.ERROR_NOT_SUPPORTED|
   * @return iface HIDL interface object representing the iface if
   *         successful, null otherwise.
   */
  createStaIface() generates (WifiStatus status, IWifiStaIface iface);

  /**
   * List all the STA iface names configured on the chip.
   * The corresponding |IWifiStaIface| object for any iface are
   * retrieved using |getStaIface| method.
   *
   * @return status WifiStatus of the operation.
   *         Possible status codes:
   *         |WifiStatusCode.SUCCESS|,
   *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|
   * @return ifnames List of all STA iface names on the chip.
   */
  getStaIfaceNames() generates (WifiStatus status, vec<string> ifnames);

  /**
   * Gets a HIDL interface object for the STA Iface corresponding
   * to the provided ifname.
   *
   * @param ifname Name of the iface.
   * @return status WifiStatus of the operation.
   *         Possible status codes:
   *         |WifiStatusCode.SUCCESS|,
   *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
   *         |WifiStatusCode.ERROR_INVALID_ARGS|
   * @return iface HIDL interface object representing the iface if
   *         it exists, null otherwise.
   */
  getStaIface(string ifname) generates (WifiStatus status, IWifiStaIface iface);

  /**
   * Removes the STA Iface with the provided ifname.
   * Any further calls on the corresponding |IWifiStaIface| HIDL interface
   * object must fail.
   *
   * @param ifname Name of the iface.
   * @return status WifiStatus of the operation.
   *         Possible status codes:
   *         |WifiStatusCode.SUCCESS|,
   *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
   *         |WifiStatusCode.ERROR_INVALID_ARGS|
   */
  removeStaIface(string ifname) generates (WifiStatus status);

  /**
   * Create a RTTController instance.
   *
   * RTT controller can be either:
   * a) Bound to a specific iface by passing in the corresponding |IWifiIface|
   * object in |iface| param, OR
   * b) Let the implementation decide the iface to use for RTT operations by
   * passing null in |iface| param.
   *
   * @param boundIface HIDL interface object representing the iface if
   *        the responder must be bound to a specific iface, null otherwise.
   * @return status WifiStatus of the operation.
   *         Possible status codes:
   *         |WifiStatusCode.SUCCESS|,
   *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|
   */
  createRttController(IWifiIface boundIface)
      generates (WifiStatus status, IWifiRttController rtt);

  /**
   * WiFi debug ring buffer life cycle is as follow:
   * - At initialization time, framework must call |getDebugRingBuffersStatus|.
   *   to obtain the names and list of supported ring buffers.
   *   The driver may expose several different rings each holding a different
   *   type of data (connection events, power events, etc).
   * - When WiFi operations start framework must call
   *   |startLoggingToDebugRingBuffer| to trigger log collection for a specific
   *   ring. The vebose level for each ring buffer can be specified in this API.
   * - During wifi operations, driver must periodically report per ring data to
   *   framework by invoking the
   *   |IWifiChipEventCallback.onDebugRingBufferDataAvailable| callback.
   * - When capturing a bug report, framework must indicate to driver that all
   *   the data has to be uploaded urgently by calling
   *   |forceDumpToDebugRingBuffer|.
   *
   * The data uploaded by driver must be stored by framework in separate files,
   * with one stream of file per ring. Framework must store the files in pcapng
   * format, allowing for easy merging and parsing with network analyzer tools.
   * TODO: Since we're not longer dumping out the raw data, storing in separate
   * pcapng files for parsing later must not work anymore.
   */
  /**
   * API to get the status of all ring buffers supported by driver.
   *
   * @return status WifiStatus of the operation.
   *         Possible status codes:
   *         |WifiStatusCode.SUCCESS|,
   *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
   *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
   *         |WifiStatusCode.NOT_AVAILABLE|,
   *         |WifiStatusCode.UNKNOWN|
   * @return ringBuffers Vector of |WifiDebugRingBufferStatus| corresponding to the
   *         status of each ring bufffer on the device.
   */
  getDebugRingBuffersStatus() generates (WifiStatus status,
                                         vec<WifiDebugRingBufferStatus> ringBuffers);

  /**
   * API to trigger the debug data collection.
   *
   * @param ringName represent the name of the ring for which data collection
   *        shall start. This can be retrieved via the corresponding
   *        |WifiDebugRingBufferStatus|.
   * @parm maxIntervalInSec Maximum interval in seconds for driver to invoke
   *       |onDebugRingBufferData|, ignore if zero.
   * @parm minDataSizeInBytes: Minimum data size in buffer for driver to invoke
   *       |onDebugRingBufferData|, ignore if zero.
   * @return status WifiStatus of the operation.
   *         Possible status codes:
   *         |WifiStatusCode.SUCCESS|,
   *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
   *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
   *         |WifiStatusCode.NOT_AVAILABLE|,
   *         |WifiStatusCode.UNKNOWN|
   */
  startLoggingToDebugRingBuffer(string ringName,
                                WifiDebugRingBufferVerboseLevel verboseLevel,
                                uint32_t maxIntervalInSec,
                                uint32_t minDataSizeInBytes)
      generates (WifiStatus status);

  /**
   * API to force dump data into the corresponding ring buffer.
   * This is to be invoked during bugreport collection.
   *
   * @param ringName represent the name of the ring for which data collection
   *        shall be forced. This can be retrieved via the corresponding
   *        |WifiDebugRingBufferStatus|.
   * @return status WifiStatus of the operation.
   *         Possible status codes:
   *         |WifiStatusCode.SUCCESS|,
   *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
   *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
   *         |WifiStatusCode.ERROR_NOT_STARTED|,
   *         |WifiStatusCode.NOT_AVAILABLE|,
   *         |WifiStatusCode.UNKNOWN|
   */
  forceDumpToDebugRingBuffer(string ringName) generates (WifiStatus status);

  /**
   * API to stop the debug data collection for all ring buffers.
   *
   * @return status WifiStatus of the operation.
   *         Possible status codes:
   *         |WifiStatusCode.SUCCESS|,
   *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
   *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
   *         |WifiStatusCode.NOT_AVAILABLE|,
   *         |WifiStatusCode.UNKNOWN|
   */
  stopLoggingToDebugRingBuffer() generates (WifiStatus status);

  /**
   * API to retrieve the wifi wake up reason stats for debugging.
   * The driver is expected to start maintaining these stats once the chip
   * is configured using |configureChip|. These stats must be reset whenever
   * the chip is reconfigured or the HAL is stopped.
   *
   * @return status WifiStatus of the operation.
   *         Possible status codes:
   *         |WifiStatusCode.SUCCESS|,
   *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
   *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
   *         |WifiStatusCode.NOT_AVAILABLE|,
   *         |WifiStatusCode.UNKNOWN|
   * @return stats Instance of |WifiDebugHostWakeReasonStats|.
   */
  getDebugHostWakeReasonStats()
      generates (WifiStatus status, WifiDebugHostWakeReasonStats stats);

  /**
   * API to enable/disable alert notifications from the chip.
   * These alerts must be used to notify framework of any fatal error events
   * that the chip encounters via |IWifiChipEventCallback.onDebugErrorAlert| method.
   * Must fail if |ChipCapabilityMask.DEBUG_ERROR_ALERTS| is not set.
   *
   * @param enable true to enable, false to disable.
   * @return status WifiStatus of the operation.
   *         Possible status codes:
   *         |WifiStatusCode.SUCCESS|,
   *         |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
   *         |WifiStatusCode.ERROR_NOT_SUPPORTED|,
   *         |WifiStatusCode.NOT_AVAILABLE|,
   *         |WifiStatusCode.UNKNOWN|
   */
  enableDebugErrorAlerts(bool enable) generates (WifiStatus status);
};