tequilaOS/platform_hardware_interfaces
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
platform_hardware_interfaces/radio/1.0/IRadio.hal
Wileen Chiu d87bd02d5a Add p2 option in OpenLogicalChannel 
- Adding support for P2 parameter
- Needed to support OMAPI 3.0 defined
  by SIM Alliance

Test: Basic telephony sanity
Bug: 27360148
Merged-In: I6a274195065ab1ef8406849228f60859ee826e53
Change-Id: I88134eded001e14c12e1f2a18efd0a2b51bc22fe
2017-04-12 17:16:50 +00:00

1574 lines
56 KiB
Text
Raw Blame History

/*
* Copyright (C) 2016 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package android.hardware.radio@1.0;
import IRadioResponse;
import IRadioIndication;
/**
* This interface is used by telephony & telecom to talk to cellular radio.
* All the functions have minimum one parameter:
* serial: which corresponds to serial no. of request. Serial numbers must only be memorized for the
* duration of a method call. If clients provide colliding serials (including passing the same
* serial to different methods), multiple responses (one for each method call) must still be served.
*/
interface IRadio {
/**
* Set response functions for radio requests & radio indications.
*
* @param radioResponse Object containing response functions
* @param radioIndication Object containing radio indications
*/
setResponseFunctions(IRadioResponse radioResponse,
IRadioIndication radioIndication);
/**
* Requests status of the ICC card
*
* @param serial Serial number of request.
*
* Response function is IRadioResponse.getIccCardStatusResponse()
*
*/
oneway getIccCardStatus(int32_t serial);
/**
* Supplies ICC PIN. Only called if CardStatus has AppState.PIN state
*
* @param serial Serial number of request.
* @param pin PIN value
* @param aid AID value, See ETSI 102.221 8.1 and 101.220 4, empty string if no value.
*
* Response function is IRadioResponse.supplyIccPinForAppResponse()
*
*/
oneway supplyIccPinForApp(int32_t serial, string pin, string aid);
/**
* Supplies ICC PUK and new PIN.
*
* @param serial Serial number of request.
* @param puk PUK value
* @param pin New PIN value
* @param aid AID value, See ETSI 102.221 8.1 and 101.220 4, empty string if no value.
*
* Response function is IRadioResponse.supplyIccPukForAppResponse()
*
*/
oneway supplyIccPukForApp(int32_t serial, string puk, string pin, string aid);
/**
* Supplies ICC PIN2. Only called following operation where SIM_PIN2 was
* returned as a a failure from a previous operation.
*
* @param serial Serial number of request.
* @param pin2 PIN2 value
* @param aid AID value, See ETSI 102.221 8.1 and 101.220 4, empty string if no value.
*
* Response function is IRadioResponse.supplyIccPin2ForAppResponse()
*
*/
oneway supplyIccPin2ForApp(int32_t serial, string pin2, string aid);
/**
* Supplies ICC PUK2 and new PIN2.
*
* @param serial Serial number of request.
* @param puk2 PUK2 value
* @param pin2 New PIN2 value
* @param aid AID value, See ETSI 102.221 8.1 and 101.220 4, empty string if no value.
*
* Response function is IRadioResponse.supplyIccPuk2ForAppResponse()
*
*/
oneway supplyIccPuk2ForApp(int32_t serial, string puk2, string pin2,
string aid);
/**
* Supplies old ICC PIN and new PIN.
*
* @param serial Serial number of request.
* @param oldPin Old pin value
* @param newPin New pin value
* @param aid AID value, See ETSI 102.221 8.1 and 101.220 4, empty string if no value.
*
* Response function is IRadioResponse.changeIccPinForAppResponse()
*
*/
oneway changeIccPinForApp(int32_t serial, string oldPin, string newPin,
string aid);
/**
* Supplies old ICC PIN2 and new PIN2.
*
* @param serial Serial number of request.
* @param oldPin2 Old pin2 value
* @param newPin2 New pin2 value
* @param aid AID value, See ETSI 102.221 8.1 and 101.220 4, empty string if no value.
*
* Response function is IRadioResponse.changeIccPin2ForAppResponse()
*
*/
oneway changeIccPin2ForApp(int32_t serial, string oldPin2, string newPin2,
string aid);
/**
* Requests that network personalization be deactivated
*
* @param serial Serial number of request.
* @param netPin Network depersonlization code
*
* Response function is IRadioResponse.supplyNetworkDepersonalizationResponse()
*
*/
oneway supplyNetworkDepersonalization(int32_t serial, string netPin);
/**
* Requests current call list
*
* @param serial Serial number of request.
*
* Response function is IRadioResponse.getCurrentCallsResponse()
*
*/
oneway getCurrentCalls(int32_t serial);
/**
* Initiate voice call.
* This method is never used for supplementary service codes
*
* @param serial Serial number of request.
* @param dialInfo Dial struct
*
* Response function is IRadioResponse.dialResponse()
*
*/
oneway dial(int32_t serial, Dial dialInfo);
/**
* Get the SIM IMSI
* Only valid when radio state is "RADIO_STATE_ON"
*
* @param serial Serial number of request.
* @param aid AID value, See ETSI 102.221 8.1 and 101.220 4, empty string if no value.
*
* Response function is IRadioResponse.getImsiForAppResponse()
*
*/
oneway getImsiForApp(int32_t serial, string aid);
/**
* Hang up a specific line (like AT+CHLD=1x)
* After this HANGUP request returns, Radio must show the connection is NOT
* active anymore in next requestGetCurrentCalls query.
*
* @param serial Serial number of request.
* @param gsmIndex Connection index (value of 'x' in CHLD above)
*
* Response function is IRadioResponse.hangupResponse()
*
*/
oneway hangup(int32_t serial, int32_t gsmIndex);
/**
* Hang up waiting or held (like AT+CHLD=0)
* After this HANGUP request returns, Radio must show the connection is NOT
* active anymore in next getCurrentCalls() query.
*
* @param serial Serial number of request.
*
* Response function is IRadioResponse.hangupWaitingOrBackgroundResponse()
*
*/
oneway hangupWaitingOrBackground(int32_t serial);
/**
* Hang up waiting or held (like AT+CHLD=1)
* After this HANGUP request returns, Radio must show the connection is NOT
* active anymore in next getCurrentCalls query.
*
* @param serial Serial number of request.
*
* Response function is IRadioResponse.hangupForegroundResumeBackgroundResponse()
*
*/
oneway hangupForegroundResumeBackground(int32_t serial);
/**
* Switch waiting or holding call and active call (like AT+CHLD=2)
* State transitions must be as follows:
*
* Call transitions must happen as shown below.
*
* BEFORE AFTER
* Call 1 Call 2 Call 1 Call 2
* ACTIVE HOLDING HOLDING ACTIVE
* ACTIVE WAITING HOLDING ACTIVE
* HOLDING WAITING HOLDING ACTIVE
* ACTIVE IDLE HOLDING IDLE
* IDLE IDLE IDLE IDLE
*
* @param serial Serial number of request.
*
* Response function is IRadioResponse.switchWaitingOrHoldingAndActiveResponse()
*
*/
oneway switchWaitingOrHoldingAndActive(int32_t serial);
/**
* Conference holding and active (like AT+CHLD=3)
*
* @param serial Serial number of request.
*
* Response function is IRadioResponse.conferenceResponse()
*
*/
oneway conference(int32_t serial);
/**
* Send UDUB (user determined user busy) to ringing or
* waiting call answer)
*
* @param serial Serial number of request.
*
* Response function is IRadioResponse.rejectCallResponse()
*
*/
oneway rejectCall(int32_t serial);
/**
* Requests the failure cause code for the most recently terminated call.
*
* @param serial Serial number of request.
*
* Response function is IRadioResponse.getLastCallFailCauseResponse()
*
*/
oneway getLastCallFailCause(int32_t serial);
/**
* Requests current signal strength and associated information.
* Must succeed if radio is on.
*
* @param serial Serial number of request.
*
* Response function is IRadioResponse.getSignalStrengthResponse()
*/
oneway getSignalStrength(int32_t serial);
/**
* Request current voice registration state
*
* @param serial Serial number of request.
*
* Response function is IRadioResponse.getVoiceRegistrationStateResponse()
*/
oneway getVoiceRegistrationState(int32_t serial);
/**
* Request current data registration state
*
* @param serial Serial number of request.
*
* Response function is IRadioResponse.getDataRegistrationStateResponse()
*/
oneway getDataRegistrationState(int32_t serial);
/**
* Request current operator ONS or EONS
*
* @param serial Serial number of request.
*
* Response function is IRadioResponse.getOperatorResponse()
*/
oneway getOperator(int32_t serial);
/**
* Toggle radio on and off (for "airplane" mode)
* If the radio is turned off/on the radio modem subsystem
* is expected return to an initialized state. For instance,
* any voice and data calls must be terminated and all associated
* lists emptied.
*
* @param serial Serial number of request.
* @param on To turn on radio -> on = true, to turn off radio -> on = false.
*
* Response function is IRadioResponse.setRadioPowerResponse()
*/
oneway setRadioPower(int32_t serial, bool on);
/**
* Send a DTMF tone
*
* If the implementation is currently playing a tone requested via
* startDtmf(), that tone must be cancelled and the new tone
* must be played instead
*
* @param serial Serial number of request.
* @param s string with single char having one of 12 values: 0-9, *, #
*
* Response function is IRadioResponse.sendDtmfResponse()
*/
oneway sendDtmf(int32_t serial, string s);
/**
* Send an SMS message
*
* @param serial Serial number of request.
* @param message GsmSmsMessage as defined in types.hal
*
* Response function is IRadioResponse.sendSmsResponse()
*
* Based on the return error, caller decides to resend if sending sms
* fails. RadioError:SMS_SEND_FAIL_RETRY means retry (i.e. error cause is 332)
* and RadioError:GENERIC_FAILURE means no retry (i.e. error cause is 500)
*/
oneway sendSms(int32_t serial, GsmSmsMessage message);
/**
* Send an SMS message. Identical to sendSms,
* except that more messages are expected to be sent soon. If possible,
* keep SMS relay protocol link open (eg TS 27.005 AT+CMMS command)
*
* @param serial Serial number of request.
* @param message GsmSmsMessage as defined in types.hal
*
* Response function is IRadioResponse.sendSMSExpectMoreResponse()
*
* Based on the return error, caller decides to resend if sending sms
* fails. RadioError:SMS_SEND_FAIL_RETRY means retry (i.e. error cause is 332)
* and RadioError:GENERIC_FAILURE means no retry (i.e. error cause is 500)
*/
oneway sendSMSExpectMore(int32_t serial, GsmSmsMessage message);
/**
* Setup a packet data connection. If DataCallResponse.status
* return DataCallFailCause:NONE it is added to the list of data calls and a
* unsolDataCallListChanged() is sent. The call remains in the
* list until deactivateDataCall() is issued or the
* radio is powered off/on. This list is returned by getDataCallList()
* and dataCallListChanged().
*
* The Radio is expected to:
* - Create one data call context.
* - Create and configure a dedicated interface for the context
* - The interface must be point to point.
* - The interface is configured with one or more addresses and
* is capable of sending and receiving packets. The prefix length
* of the addresses must be /32 for IPv4 and /128 for IPv6.
* - Must NOT change the linux routing table.
* - Support up to getDataRegistrationState response[5]
* number of simultaneous data call contexts.
*
* @param serial Serial number of request.
* @param radioTechnology Radio technology to use.
* @param dataProfileInfo data profile info.
* @param modemCognitive Indicating this profile was sent to the modem through setDataProfile
* earlier.
* @param roamingAllowed Indicating data roaming is allowed or not by the user.
* @param isRoaming Indicating the device is roaming or not. The 'protocol' parameter in the old
* RIL API must be filled accordingly based on the roaming condition.
* Note this is for backward compatibility with the old radio modem. The modem
* must not use this param for any other reason.
*
* Response function is IRadioResponse.setupDataCallResponse()
*/
oneway setupDataCall(int32_t serial, RadioTechnology radioTechnology,
DataProfileInfo dataProfileInfo, bool modemCognitive, bool roamingAllowed,
bool isRoaming);
/**
* Request ICC I/O operation.
* This is similar to the TS 27.007 "restricted SIM" operation
* where it assumes all of the EF selection must be done by the
* callee
*
* Arguments and responses that are unused for certain
* values of "command" must be ignored or set to empty string
*
* @param serial Serial number of request.
* @param iccIo IccIo
*
* Please note that IccIo has a "PIN2" field which may be empty string,
* or may specify a PIN2 for operations that require a PIN2 (eg
* updating FDN records)
*
* Response function is IRadioResponse.iccIOForAppResponse()
*/
oneway iccIOForApp(int32_t serial, IccIo iccIo);
/**
* Send a USSD message.
*
* If a USSD session already exists, the message must be sent in the
* context of that session. Otherwise, a new session must be created.
*
* The network reply must be reported via unsolOnUssd
*
* Only one USSD session must exist at a time, and the session is assumed
* to exist until:
* a) The android system invokes cancelUssd()
* b) The implementation sends a unsolOnUssd() with a type code
* of "0" (USSD-Notify/no further action) or "2" (session terminated)
*
* @param serial Serial number of request.
* @param ussd string containing the USSD request in UTF-8 format
*
* Response function is IRadioResponse.sendUssdResponse()
*
* See also requestCancelUssd, unsolOnUssd
*/
oneway sendUssd(int32_t serial, string ussd);
/**
* Cancel the current USSD session if one exists.
*
* @param serial Serial number of request.
*
* Response function is IRadioResponse.cancelPendingUssdResponse()
*/
oneway cancelPendingUssd(int32_t serial);
/**
* Gets current CLIR status
*
* @param serial Serial number of request.
*
* Response function is IRadioResponse.getClirResponse()
*/
oneway getClir(int32_t serial);
/**
* Set current CLIR status
*
* @param serial Serial number of request.
* @param status "n" parameter from TS 27.007 7.7
*
* Response function is IRadioResponse.setClirResponse()
*/
oneway setClir(int32_t serial, int32_t status);
/**
* Request call forward status.
*
* @param serial Serial number of request.
* @param callInfo CallForwardInfo
*
* Response function is IRadioResponse.getCallForwardStatusResponse()
*/
oneway getCallForwardStatus(int32_t serial,
CallForwardInfo callInfo);
/**
* Configure call forward rule
*
* @param serial Serial number of request.
* @param callInfo CallForwardInfo
*
* Response function is IRadioResponse.setCallForwardResponse()
*/
oneway setCallForward(int32_t serial, CallForwardInfo callInfo);
/**
* Query current call waiting state
*
* @param serial Serial number of request.
* @param serviceClass Service class is the TS 27.007 service class to query
*
* Response function is IRadioResponse.getCallWaitingResponse()
*/
oneway getCallWaiting(int32_t serial, int32_t serviceClass);
/**
* Configure current call waiting state
*
* @param serial Serial number of request.
* @param enable is false for "disabled" and true for "enabled"
* @param serviceClass is the TS 27.007 service class bit vector of services to modify
*
* Response function is IRadioResponse.setCallWaitingResponse()
*/
oneway setCallWaiting(int32_t serial, bool enable,
int32_t serviceClass);
/**
* Acknowledge successful or failed receipt of SMS previously indicated
* via unsolResponseNewSms
*
* @param serial Serial number of request.
* @param success is true on successful receipt
* (basically, AT+CNMA=1 from TS 27.005 is 0 on failed receipt
* (basically, AT+CNMA=2 from TS 27.005)
* @param cause: if success is false, this contains the failure cause as defined
* in TS 23.040, 9.2.3.22.
*
* Response function is IRadioResponse.acknowledgeLastIncomingGsmSmsResponse()
*/
oneway acknowledgeLastIncomingGsmSms(int32_t serial, bool success,
SmsAcknowledgeFailCause cause);
/**
* Answer incoming call
* Must not be called for WAITING calls.
* switchWaitingOrHoldingAndActive() must be used in this case
* instead
*
* @param serial Serial number of request.
*
* Response function is IRadioResponse.acceptCallResponse()
*/
oneway acceptCall(int32_t serial);
/**
* Deactivate packet data connection and remove from the
* data call list if RadioError:NONE is returned. Any other return
* values must also try to remove the call from the list. An
* unsolDataCallListChanged must be
* issued because of an deactivateDataCall.
*
* @param serial Serial number of request.
* @param cid Indicates CID
* @param reasonRadioShutDown Indicates Disconnect Reason
* false => No specific reason specified
* true => Radio shutdown requested
*
* Response function is IRadioResponse.deactivateDataCallResponse()
*/
oneway deactivateDataCall(int32_t serial, int32_t cid,
bool reasonRadioShutDown);
/**
* Query the status of a facility lock state
*
* @param serial Serial number of request.
* @param facility is the facility string code from TS 27.007 7.4
* (eg "AO" for BAOC, "SC" for SIM lock)
* @param password is the password, or "" if not required
* @param serviceClass is the TS 27.007 service class bit vector of services to query
* @param appId is AID value, See ETSI 102.221 8.1 and 101.220 4, empty string if no value.
* This is only applicable in the case of Fixed Dialing Numbers (FDN) requests.
*
* Response function is IRadioResponse.getFacilityLockForAppResponse()
*/
oneway getFacilityLockForApp(int32_t serial, string facility,
string password, int32_t serviceClass, string appId);
/**
* Enable/disable one facility lock
*
* @param serial Serial number of request.
* @param facility is the facility string code from TS 27.007 7.4 (eg "AO" for BAOC)
* @param lockState false for "unlock" and true for "lock"
* @param password is the password
* @param serviceClass is string representation of decimal TS 27.007
* service class bit vector. Eg, the string
* "1" means "set this facility for voice services"
* @param appId is AID value, See ETSI 102.221 8.1 and 101.220 4, empty string if no value.
* This is only applicable in the case of Fixed Dialing Numbers (FDN) requests.
*
* Response function is IRadioResponse.setFacilityLockForAppResponse()
*/
oneway setFacilityLockForApp(int32_t serial, string facility, bool lockState,
string password, int32_t serviceClass, string appId);
/**
* Change call barring facility password
*
* @param serial Serial number of request.
* @param facility facility string code from TS 27.007 7.4 (eg "AO" for BAOC)
* @param oldPassword old password
* @param newPassword new password
*
* Response function is IRadioResponse.setBarringPasswordResponse()
*/
oneway setBarringPassword(int32_t serial, string facility,
string oldPassword, string newPassword);
/**
* Query current network selection mode
*
* @param serial Serial number of request.
*
* Response function is IRadioResponse.getNetworkSelectionModeResponse()
*/
oneway getNetworkSelectionMode(int32_t serial);
/**
* Specify that the network must be selected automatically.
* This request must not respond until the new operator is selected and registered.
*
* @param serial Serial number of request.
*
* Response function is IRadioResponse.setNetworkSelectionModeAutomaticResponse()
*/
oneway setNetworkSelectionModeAutomatic(int32_t serial);
/**
* Manually select a specified network.
* This request must not respond until the new operator is selected and registered.
*
* @param serial Serial number of request.
* @param operatorNumeric string specifying MCCMNC of network to select (eg "310170")
*
* Response function is IRadioResponse.setNetworkSelectionModeManualResponse()
*/
oneway setNetworkSelectionModeManual(int32_t serial, string operatorNumeric);
/**
* Scans for available networks
*
* @param serial Serial number of request.
*
* Response function is IRadioResponse.getAvailableNetworksResponse()
*/
oneway getAvailableNetworks(int32_t serial);
/**
* Start playing a DTMF tone. Continue playing DTMF tone until
* stopDtmf is received.
* If a startDtmf() is received while a tone is currently playing,
* it must cancel the previous tone and play the new one.
*
* @param serial Serial number of request.
* @param s string having a single character with one of 12 values: 0-9,*,#
*
* Response function is IRadioResponse.startDtmfResponse()
*/
oneway startDtmf(int32_t serial, string s);
/**
* Stop playing a currently playing DTMF tone.
*
* @param serial Serial number of request.
*
* Response function is IRadioResponse.stopDtmfResponse()
*/
oneway stopDtmf(int32_t serial);
/**
* Return string value indicating baseband version, eg response from AT+CGMR
*
* @param serial Serial number of request.
*
* Response function is IRadioResponse.getBasebandVersionResponse()
*/
oneway getBasebandVersion(int32_t serial);
/**
* Separate a party from a multiparty call placing the multiparty call
* (less the specified party) on hold and leaving the specified party
* as the only other member of the current (active) call
*
* Like AT+CHLD=2x
*
* See TS 22.084 1.3.8.2 (iii)
* TS 22.030 6.5.5 "Entering "2X followed by send"
* TS 27.007 "AT+CHLD=2x"
*
* @param serial Serial number of request.
* @param gsmIndex contains Connection index (value of 'x' in CHLD above)
*
* Response function is IRadioResponse.separateConnectionResponse()
*/
oneway separateConnection(int32_t serial, int32_t gsmIndex);
/**
* Turn on or off uplink (microphone) mute.
* Must only be sent while voice call is active.
* Must always be reset to "disable mute" when a new voice call is initiated
*
* @param serial Serial number of request.
* @param enable true for "enable mute" and false for "disable mute"
*
* Response function is IRadioResponse.setMuteResponse()
*/
oneway setMute(int32_t serial, bool enable);
/**
* Queries the current state of the uplink mute setting
*
* @param serial Serial number of request.
*
* Response function is IRadioResponse.getMuteResponse()
*/
oneway getMute(int32_t serial);
/**
* Queries the status of the CLIP supplementary service
* (for MMI code "*#30#")
*
* @param serial Serial number of request.
*
* Response function is IRadioResponse.getClipResponse()
*/
oneway getClip(int32_t serial);
/**
* Returns the data call list. An entry is added when a
* setupDataCall() is issued and removed on a
* deactivateDataCall(). The list is emptied when
* setRadioPower() off/on is issued.
*
* @param serial Serial number of request.
*
* Response function is IRadioResponse.getDataCallListResponse()
*/
oneway getDataCallList(int32_t serial);
/**
* Enables/disables supplementary service related notifications from the network.
* Notifications are reported via unsolSuppSvcNotification().
*
* @param serial Serial number of request.
* @param enable true = notifications enabled, false = notifications disabled.
*
* Response function is IRadioResponse.setSuppServiceNotificationsResponse()
*/
oneway setSuppServiceNotifications(int32_t serial, bool enable);
/**
* Stores a SMS message to SIM memory.
*
* @param serial Serial number of request.
* @param smsWriteArgs SmsWriteArgs defined in types.hal
*
* Response function is IRadioResponse.writeSmsToSimResponse()
*/
oneway writeSmsToSim(int32_t serial, SmsWriteArgs smsWriteArgs);
/**
* Deletes a SMS message from SIM memory.
*
* @param serial Serial number of request.
* @param index Record index of the message to delete.
*
* Response function is IRadioResponse.deleteSmsOnSimResponse()
*/
oneway deleteSmsOnSim(int32_t serial, int32_t index);
/**
* Assign a specified band for RF configuration.
*
* @param serial Serial number of request.
* @param mode RadioBandMode defined in types.hal
*
* Response function is IRadioResponse.setBandModeResponse()
*/
oneway setBandMode(int32_t serial, RadioBandMode mode);
/**
* Get the list of band modes supported by RF.
*
* @param serial Serial number of request.
*
* Response function is IRadioResponse.getAvailableBandModesResponse()
*/
oneway getAvailableBandModes(int32_t serial);
/**
* Requests to send a SAT/USAT envelope command to SIM.
* The SAT/USAT envelope command refers to 3GPP TS 11.14 and 3GPP TS 31.111
*
* @param serial Serial number of request.
* @param command SAT/USAT command in hexadecimal format string starting with command tag
*
* Response function is IRadioResponse.sendEnvelopeResponse()
*/
oneway sendEnvelope(int32_t serial, string command);
/**
* Requests to send a terminal response to SIM for a received proactive command
*
* @param serial Serial number of request.
* @param commandResponse SAT/USAT response in hexadecimal format string starting with
* first byte of response data
*
* Response function is IRadioResponse.sendTerminalResponseResponseToSim()
*/
oneway sendTerminalResponseToSim(int32_t serial, string commandResponse);
/**
* When STK application gets stkCallSetup(), the call actually has
* been initialized by mobile device already. (We could see the call has been in the 'call
* list') So, STK application needs to accept/reject the call according to user
* operations.
*
* @param serial Serial number of request.
* @param accept true = accept the call setup, false = reject the call setup
*
* Response callback is IRadioResponse.handleStkCallSetupRequestFromSimResponse()
*/
oneway handleStkCallSetupRequestFromSim(int32_t serial,
bool accept);
/**
* Connects the two calls and disconnects the subscriber from both calls.
*
* @param serial Serial number of request.
*
* Response callback is IRadioResponse.explicitCallTransferResponse()
*/
oneway explicitCallTransfer(int32_t serial);
/**
* Requests to set the preferred network type for searching and registering
* (CS/PS domain, RAT, and operation mode)
*
* @param serial Serial number of request.
* @param nwType PreferredNetworkType defined in types.hal
*
* Response callback is IRadioResponse.setPreferredNetworkTypeResponse()
*/
oneway setPreferredNetworkType(int32_t serial,
PreferredNetworkType nwType);
/**
* Query the preferred network type (CS/PS domain, RAT, and operation mode)
* for searching and registering
*
* @param serial Serial number of request.
*
* Response callback is IRadioResponse.getPreferredNetworkTypeResponse()
*/
oneway getPreferredNetworkType(int32_t serial);
/**
* Request neighboring cell id in GSM network
*
* @param serial Serial number of request.
*
* Response callback is IRadioResponse.getNeighboringCidsResponse()
*/
oneway getNeighboringCids(int32_t serial);
/**
* Enables/disables network state change notifications due to changes in
* LAC and/or CID (for GSM) or BID/SID/NID/latitude/longitude (for CDMA).
* Basically +CREG=2 vs. +CREG=1 (TS 27.007).
* Note: The Radio implementation must default to "updates enabled"
* when the screen is on and "updates disabled" when the screen is off.
*
* @param serial Serial number of request.
* @param enable true = updates enabled (+CREG=2), false = updates disabled (+CREG=1)
*
* Response callback is IRadioResponse.setLocationUpdatesResponse()
*/
oneway setLocationUpdates(int32_t serial, bool enable);
/**
* Request to set the location where the CDMA subscription shall
* be retrieved
*
* @param serial Serial number of request.
* @param cdmaSub CdmaSubscriptionSource
*
* Response callback is IRadioResponse.setCdmaSubscriptionSourceResponse()
*/
oneway setCdmaSubscriptionSource(int32_t serial,
CdmaSubscriptionSource cdmaSub);
/**
* Request to set the roaming preferences in CDMA
*
* @param serial Serial number of request.
* @param type CdmaRoamingType defined in types.hal
*
* Response callback is IRadioResponse.setCdmaRoamingPreferenceResponse()
*/
oneway setCdmaRoamingPreference(int32_t serial,
CdmaRoamingType type);
/**
* Request the actual setting of the roaming preferences in CDMA in the modem
*
* @param serial Serial number of request.
*
* Response callback is IRadioResponse.getCdmaRoamingPreferenceResponse()
*/
oneway getCdmaRoamingPreference(int32_t serial);
/**
* Request to set the TTY mode
*
* @param serial Serial number of request.
* @param mode TtyMode
*
* Response callback is IRadioResponse.setTTYModeResponse()
*/
oneway setTTYMode(int32_t serial, TtyMode mode);
/**
* Request the setting of TTY mode
*
* @param serial Serial number of request.
*
* Response callback is IRadioResponse.getTTYModeResponse()
*/
oneway getTTYMode(int32_t serial);
/**
* Request to set the preferred voice privacy mode used in voice scrambling.
*
* @param serial Serial number of request.
* @param enable false for Standard Privacy Mode (Public Long Code Mask)
* true for Enhanced Privacy Mode (Private Long Code Mask)
*
* Response callback is IRadioResponse.setPreferredVoicePrivacyResponse()
*/
oneway setPreferredVoicePrivacy(int32_t serial, bool enable);
/**
* Request the setting of preferred voice privacy mode.
*
* @param serial Serial number of request.
*
* Response callback is IRadioResponse.getPreferredVoicePrivacyResponse()
*/
oneway getPreferredVoicePrivacy(int32_t serial);
/**
* Send FLASH command
*
* @param serial Serial number of request.
* @param featureCode String associated with Flash command
*
* Response callback is IRadioResponse.sendCDMAFeatureCodeResponse()
*/
oneway sendCDMAFeatureCode(int32_t serial, string featureCode);
/**
* Send DTMF string
*
* @param serial Serial number of request.
* @param dtmf DTMF string
* @param on DTMF ON length in milliseconds, or 0 to use default
* @param off is the DTMF OFF length in milliseconds, or 0 to use default
*
* Response callback is IRadioResponse.sendBurstDtmfResponse()
*/
oneway sendBurstDtmf(int32_t serial, string dtmf, int32_t on, int32_t off);
/**
* Send a CDMA SMS message
*
* @param serial Serial number of request.
* @param sms Cdma Sms to be sent described by CdmaSmsMessage in types.hal
*
* Response callback is IRadioResponse.sendCdmaSmsResponse()
*/
oneway sendCdmaSms(int32_t serial, CdmaSmsMessage sms);
/**
* Acknowledge the success or failure in the receipt of SMS
* previously indicated via responseCdmaNewSms()
*
* @param serial Serial number of request.
* @param smsAck Cdma Sms ack to be sent described by CdmaSmsAck in types.hal
*
* Response callback is IRadioResponse.acknowledgeLastIncomingCdmaSmsResponse()
*/
oneway acknowledgeLastIncomingCdmaSms(int32_t serial, CdmaSmsAck smsAck);
/**
* Request the setting of GSM/WCDMA Cell Broadcast SMS config.
*
* @param serial Serial number of request.
*
* Response callback is IRadioResponse.getGsmBroadcastConfigResponse()
*/
oneway getGsmBroadcastConfig(int32_t serial);
/**
* Set GSM/WCDMA Cell Broadcast SMS config
*
* @param serial Serial number of request.
* @param configInfo Setting of GSM/WCDMA Cell broadcast config
*
* Response callback is IRadioResponse.setGsmBroadcastConfigResponse()
*/
oneway setGsmBroadcastConfig(int32_t serial, vec<GsmBroadcastSmsConfigInfo> configInfo);
/**
* Enable or disable the reception of GSM/WCDMA Cell Broadcast SMS
*
* @param serial Serial number of request.
* @param activate indicates to activate or turn off the reception of GSM/WCDMA
* Cell Broadcast SMS. true = activate, false = turn off
*
* Response callback is IRadioResponse.setGsmBroadcastActivationResponse()
*/
oneway setGsmBroadcastActivation(int32_t serial, bool activate);
/**
* Request the setting of CDMA Broadcast SMS config
*
* @param serial Serial number of request.
*
* Response callback is IRadioResponse.getCdmaBroadcastConfigResponse()
*/
oneway getCdmaBroadcastConfig(int32_t serial);
/**
* Set CDMA Broadcast SMS config
*
* @param serial Serial number of request.
* @param configInfo CDMA Broadcast SMS config to be set.
*
* Response callback is IRadioResponse.setCdmaBroadcastConfigResponse()
*/
oneway setCdmaBroadcastConfig(int32_t serial, vec<CdmaBroadcastSmsConfigInfo> configInfo);
/**
* Enable or disable the reception of CDMA Cell Broadcast SMS
*
* @param serial Serial number of request.
* @param activate indicates to activate or turn off the reception of CDMA
* Cell Broadcast SMS. true = activate, false = turn off
*
* Response callback is IRadioResponse.setCdmaBroadcastActivationResponse()
*/
oneway setCdmaBroadcastActivation(int32_t serial, bool activate);
/**
* Request the device MDN / H_SID / H_NID.
* The request is only allowed when CDMA subscription is available. When CDMA
* subscription is changed, application layer must re-issue the request to
* update the subscription information.
*
* @param serial Serial number of request.
*
* Response callback is IRadioResponse.getCDMASubscriptionResponse()
*/
oneway getCDMASubscription(int32_t serial);
/**
* Stores a CDMA SMS message to RUIM memory.
*
* @param serial Serial number of request.
* @param cdmaSms CDMA message as defined by CdmaSmsWriteArgs in types.hal
*
* Response callback is IRadioResponse.writeSmsToRuimResponse()
*/
oneway writeSmsToRuim(int32_t serial, CdmaSmsWriteArgs cdmaSms);
/**
* Deletes a CDMA SMS message from RUIM memory.
*
* @param serial Serial number of request.
* @param index record index of the message to delete
*
* Response callback is IRadioResponse.deleteSmsOnRuimResponse()
*/
oneway deleteSmsOnRuim(int32_t serial, int32_t index);
/**
* Request the device ESN / MEID / IMEI / IMEISV.
* The request is always allowed and contains GSM and CDMA device identity.
* When CDMA subscription is changed the ESN/MEID changes. The application
* layer must re-issue the request to update the device identity in this case.
*
* @param serial Serial number of request.
*
* Response callback is IRadioResponse.getDeviceIdentityResponse()
*/
oneway getDeviceIdentity(int32_t serial);
/**
* Request the radio's system selection module to exit emergency
* callback mode. Radio must not respond with SUCCESS until the modem has
* completely exited from Emergency Callback Mode.
*
* @param serial Serial number of request.
*
* Response callback is IRadioResponse.exitEmergencyCallbackModeResponse()
*/
oneway exitEmergencyCallbackMode(int32_t serial);
/**
* Get the default Short Message Service Center address on the device.
*
* @param serial Serial number of request.
*
* Response callback is IRadioResponse.getSmscAddressResponse()
*/
oneway getSmscAddress(int32_t serial);
/**
* Set the default Short Message Service Center address on the device.
*
* @param serial Serial number of request.
* @param smsc Short Message Service Center address to set
*
* Response callback is IRadioResponse.setSmscAddressResponse()
*/
oneway setSmscAddress(int32_t serial, string smsc);
/**
* Indicates whether there is storage available for new SMS messages.
*
* @param serial Serial number of request.
* @param available true if memory is available for storing new messages,
* false if memory capacity is exceeded
*
* Response callback is IRadioResponse.reportSmsMemoryStatusResponse()
*/
oneway reportSmsMemoryStatus(int32_t serial, bool available);
/**
* Indicates that the StkService is running and is
* ready to receive unsolicited stkXXXXX commands.
*
* @param serial Serial number of request.
*
* Response callback is IRadioResponse.reportStkServiceIsRunningResponse()
*/
oneway reportStkServiceIsRunning(int32_t serial);
/**
* Request to query the location where the CDMA subscription shall be retrieved.
*
* @param serial Serial number of request.
*
* Response callback is IRadioResponse.getCdmaSubscriptionSourceResponse()
*/
oneway getCdmaSubscriptionSource(int32_t serial);
/**
* Request the ISIM application on the UICC to perform AKA
* challenge/response algorithm for IMS authentication
*
* @param serial Serial number of request.
* @param challenge challenge string in Base64 format
*
* Response callback is IRadioResponse.requestIsimAuthenticationResponse()
*/
oneway requestIsimAuthentication(int32_t serial, string challenge);
/**
* Acknowledge successful or failed receipt of SMS previously indicated
* via unsol responseNewSms(), including acknowledgement TPDU to send
* as the RP-User-Data element of the RP-ACK or RP-ERROR PDU.
*
* @param serial Serial number of request.
* @param success true on successful receipt (send RP-ACK)
* false on failed receipt (send RP-ERROR)
* @param ackPdu acknowledgement TPDU in hexadecimal format
*
* Response callback is IRadioResponse.acknowledgeIncomingGsmSmsWithPduResponse()
*/
oneway acknowledgeIncomingGsmSmsWithPdu(int32_t serial, bool success, string ackPdu);
/**
* Requests to send a SAT/USAT envelope command to SIM.
* The SAT/USAT envelope command refers to 3GPP TS 11.14 and 3GPP TS 31.111.
*
* This request has one difference from sendEnvelope():
* the SW1 and SW2 status bytes from the UICC response are returned along with
* the response data, using the same structure as iccIOForApp().
*
* The implementation must perform normal processing of a '91XX'
* response in SW1/SW2 to retrieve the pending proactive command and send it
* as an unsolicited response, as sendEnvelope() does.
*
* @param serial Serial number of request.
* @param contents SAT/USAT command in hexadecimal format starting with command tag
*
* Response callback is IRadioResponse.sendEnvelopeWithStatusResponse()
*/
oneway sendEnvelopeWithStatus(int32_t serial, string contents);
/**
* Query the radio technology type (3GPP/3GPP2) used for voice. Query is valid only
* when radio state is not RADIO_STATE_UNAVAILABLE
*
* @param serial Serial number of request.
*
* Response callback is IRadioResponse.getVoiceRadioTechnologyResponse()
*/
oneway getVoiceRadioTechnology(int32_t serial);
/**
* Request all of the current cell information known to the radio. The radio
* must return list of all current cells, including the neighboring cells. If for a particular
* cell information isn't known then the appropriate unknown value will be returned.
* This does not cause or change the rate of unsolicited cellInfoList().
*
* @param serial Serial number of request.
*
* Response callback is IRadioResponse.getCellInfoListResponse()
*/
oneway getCellInfoList(int32_t serial);
/**
* Sets the minimum time between when unsolicited cellInfoList() must be invoked.
* A value of 0, means invoke cellInfoList() when any of the reported
* information changes. Setting the value to INT_MAX(0x7fffffff) means never issue
* a unsolicited cellInfoList().
*
* @param serial Serial number of request.
* @param rate minimum time in milliseconds to indicate time between unsolicited cellInfoList()
*
* Response callback is IRadioResponse.setCellInfoListRateResponse()
*/
oneway setCellInfoListRate(int32_t serial, int32_t rate);
/**
* Set an apn to initial attach network
*
* @param serial Serial number of request.
* @param dataProfileInfo data profile containing APN settings
* @param modemCognitive indicating the data profile was sent to the modem through
* setDataProfile earlier.
* @param isRoaming Indicating the device is roaming or not. The 'protocol' parameter in the old
* RIL_InitialAttachApn must be filled accordingly based on the roaming
* condition. Note this is for backward compatibility with the old radio modem.
* The modem must not use this param for any other reason.
*
* Response callback is IRadioResponse.setInitialAttachApnResponse()
*/
oneway setInitialAttachApn(int32_t serial, DataProfileInfo dataProfileInfo,
bool modemCognitive, bool isRoaming);
/**
* Request current IMS registration state
*
* @param serial Serial number of request.
*
* Response callback is IRadioResponse.getImsRegistrationStateResponse()
*/
oneway getImsRegistrationState(int32_t serial);
/**
* Send a SMS message over IMS.
* Based on the return error, caller decides to resend if sending sms
* fails. SMS_SEND_FAIL_RETRY means retry, and other errors means no retry.
* In case of retry, data is encoded based on Voice Technology available.
*
* @param serial Serial number of request.
* @param message ImsSmsMessage as defined in types.hal to be sent
*
* Response callback is IRadioResponse.sendImsSmsResponse()
*/
oneway sendImsSms(int32_t serial, ImsSmsMessage message);
/**
* Request APDU exchange on the basic channel. This command reflects TS 27.007
* "generic SIM access" operation (+CSIM). The modem must ensure proper function
* of GSM/CDMA, and filter commands appropriately. It must filter
* channel management and SELECT by DF name commands.
* "sessionid" field must be ignored.
*
* @param serial Serial number of request.
* @param message SimApdu as defined in types.hal to be sent
*
* Response callback is IRadioResponse.iccTransmitApduBasicChannelResponse()
*/
oneway iccTransmitApduBasicChannel(int32_t serial, SimApdu message);
/**
* Open a new logical channel and select the given application. This command
* reflects TS 27.007 "open logical channel" operation (+CCHO).
*
* @param serial Serial number of request.
* @param aid AID value, See ETSI 102.221 and 101.220.
* @param p2 P2 value, described in ISO 7816-4. Ignore if equal to P2Constant:NO_P2
*
* Response callback is IRadioResponse.iccOpenLogicalChannelResponse()
*/
oneway iccOpenLogicalChannel(int32_t serial, string aid, int32_t p2);
/**
* Close a previously opened logical channel. This command reflects TS 27.007
* "close logical channel" operation (+CCHC).
*
* @param serial Serial number of request.
* @param channelId session id of the logical channel (+CCHC).
*
* Response callback is IRadioResponse.iccCloseLogicalChannelResponse()
*/
oneway iccCloseLogicalChannel(int32_t serial, int32_t channelId);
/**
* Exchange APDUs with a UICC over a previously opened logical channel. This
* command reflects TS 27.007 "generic logical channel access" operation
* (+CGLA). The modem must filter channel management and SELECT by DF name
* commands.
*
* @param serial Serial number of request.
* @param message SimApdu as defined in types.hal to be sent
*
* Response callback is IRadioResponse.iccTransmitApduLogicalChannelResponse()
*/
oneway iccTransmitApduLogicalChannel(int32_t serial, SimApdu message);
/**
* Read one of the radio NV items.
* This is used for device configuration by some CDMA operators.
*
* @param serial Serial number of request.
* @param itemId NvItem is radio NV item as defined in types.hal
*
* Response callback is IRadioResponse.nvReadItemResponse()
*/
oneway nvReadItem(int32_t serial, NvItem itemId);
/**
* Write one of the radio NV items.
* This is used for device configuration by some CDMA operators.
*
* @param serial Serial number of request.
* @param item NvWriteItem as defined in types.hal
*
* Response callback is IRadioResponse.nvWriteItemResponse()
*/
oneway nvWriteItem(int32_t serial, NvWriteItem item);
/**
* Update the CDMA Preferred Roaming List (PRL) in the radio NV storage.
* This is used for device configuration by some CDMA operators.
*
* @param serial Serial number of request.
* @param prl PRL as a byte array
*
* Response callback is IRadioResponse.nvWriteCdmaPrlResponse()
*/
oneway nvWriteCdmaPrl(int32_t serial, vec<uint8_t> prl);
/**
* Reset the radio NV configuration to the factory state.
* This is used for device configuration by some CDMA operators.
*
* @param serial Serial number of request.
* @param resetType ResetNvType as defined in types.hal
*
* Response callback is IRadioResponse.nvResetConfigResponse()
*/
oneway nvResetConfig(int32_t serial, ResetNvType resetType);
/**
* Selection/de-selection of a subscription from a SIM card
*
* @param serial Serial number of request.
* @param uiccSub SelectUiccSub as defined in types.hal
*
* Response callback is IRadioResponse.setUiccSubscriptionResponse()
*/
oneway setUiccSubscription(int32_t serial, SelectUiccSub uiccSub);
/**
* Tells the modem whether data calls are allowed or not
*
* @param serial Serial number of request.
* @param allow true to allow data calls, false to disallow data calls
*
* Response callback is IRadioResponse.setDataAllowedResponse()
*/
oneway setDataAllowed(int32_t serial, bool allow);
/**
* Request all of the current hardware (modem and sim) associated with Radio.
*
* @param serial Serial number of request.
*
* Response callback is IRadioResponse.getHardwareConfigResponse()
*/
oneway getHardwareConfig(int32_t serial);
/**
* Returns the response of SIM Authentication through Radio challenge request.
*
* @param serial Serial number of request.
* @param authContext P2 value of authentication command, see P2 parameter in
* 3GPP TS 31.102 7.1.2
* @param authData the challenge string in Base64 format, see 3GPP TS 31.102 7.1.2
* @param aid AID value, See ETSI 102.221 8.1 and 101.220 4, empty string if no value
*
* Response callback is IRadioResponse.requestIccSimAuthenticationResponse()
*/
oneway requestIccSimAuthentication(int32_t serial, int32_t authContext, string authData,
string aid);
/**
* Set data profile in modem.
* Modem must erase existed profiles from framework, and apply new profiles
*
* @param serial Serial number of request.
* @param profiles Array of DataProfiles to set.
* @param isRoaming Indicating the device is roaming or not. The 'protocol' parameter in the old
* RIL API RIL_DataProfileInfo must be filled accordingly based on the
* roaming condition. Note this is for backward compatibility with the old
* radio modem. The modem must not use this param for any other reason.
*
* Response callback is IRadioResponse.setDataProfileResponse()
*/
oneway setDataProfile(int32_t serial, vec<DataProfileInfo> profiles, bool isRoaming);
/**
* Device is shutting down. All further commands are ignored
* and RADIO_NOT_AVAILABLE must be returned.
*
* @param serial Serial number of request.
*
* Response callback is IRadioResponse.requestShutdownResponse()
*/
oneway requestShutdown(int32_t serial);
/**
* Used to get phone radio capability.
*
* @param serial Serial number of request.
*
* Response callback is IRadioResponse.getRadioCapabilityResponse()
*/
oneway getRadioCapability(int32_t serial);
/**
* Used to set the phones radio capability. Be VERY careful
* using this request as it may cause some vendor modems to reset. Because
* of the possible modem reset any radio commands after this one may not be
* processed.
*
* @param serial Serial number of request.
* @param rc RadioCapability structure to be set
*
* Response callback is IRadioResponse.setRadioCapabilityResponse()
*/
oneway setRadioCapability(int32_t serial, RadioCapability rc);
/**
* Start Link Capacity Estimate (LCE) service if supported by the radio.
*
* @param serial Serial number of request.
* @param reportInterval desired reporting interval (ms).
* @param pullMode LCE service mode. true: PULL; false: PUSH.
*
* Response callback is IRadioResponse.startLceServiceResponse()
*/
oneway startLceService(int32_t serial, int32_t reportInterval, bool pullMode);
/**
* Stop Link Capacity Estimate (LCE) service, the STOP operation must be
* idempotent for the radio modem.
*
* @param serial Serial number of request.
*
* Response callback is IRadioResponse.stopLceServiceResponse()
*/
oneway stopLceService(int32_t serial);
/**
* Pull LCE service for capacity information.
*
* @param serial Serial number of request.
*
* Response callback is IRadioResponse.pullLceDataResponse()
*/
oneway pullLceData(int32_t serial);
/**
* Get modem activity information for power consumption estimation.
* Request clear-on-read statistics information that is used for
* estimating the per-millisecond power consumption of the cellular
* modem.
*
* @param serial Serial number of request.
*
* Response callback is IRadioResponse.getModemActivityInfoResponse()
*/
oneway getModemActivityInfo(int32_t serial);
/**
* Set carrier restrictions. Expected modem behavior:
* If never receives this command
* - Must allow all carriers
* Receives this command with allAllowed true
* - Must allow all carriers. If a previously allowed SIM is present, modem must not reload
* the SIM. If a previously disallowed SIM is present, reload the SIM and notify Android.
* Receives this command with a list of carriers & allAllowed = false
* - Only allow specified carriers, persist across power cycles and FDR. If a present SIM
* is in the allowed list, modem must not reload the SIM. If a present SIM is *not* in
* the allowed list, modem must detach from the registered network and only keep emergency
* service, and notify Android SIM refresh reset with new SIM state being
* CardState:RESTRICTED. Emergency service must be enabled.
*
* @param serial Serial number of request.
* @param allAllowed true only when all carriers are allowed. Ignore "carriers" struct.
* If false, consider "carriers" struct
* @param carriers CarrierRestrictions consisting allowed and excluded carriers as defined
* in types.hal
*
* Response callback is IRadioResponse.setAllowedCarriersResponse()
*/
oneway setAllowedCarriers(int32_t serial, bool allAllowed, CarrierRestrictions carriers);
/**
* Get carrier restrictions.
*
* @param serial Serial number of request.
*
* Response callback is IRadioResponse.getAllowedCarriersResponse()
*/
oneway getAllowedCarriers(int32_t serial);
/**
* Send the updated device state.
* This is providing the device state information for the modem to perform power saving
* strategies.
*
* @param serial Serial number of request.
* @param deviceStateType The updated device state type.
* @param state The updated state. See the definition of state at DeviceStateType.
*
* Response callback is IRadioResponse.sendDeviceStateResponse()
*/
oneway sendDeviceState(int32_t serial, DeviceStateType deviceStateType, bool state);
/**
* Set the indication filter.
* This is used to prevent unnecessary application processor wake up for power saving purposes
* by suppressing the indications in certain scenarios.
*
* @param serial Serial number of request.
* @param indicationFilter 32-bit bitmap of IndicationFilter. Bits set to 1 indicate the
* indications are enabled. See IndicationFilter for the definition of each bit.
*
* Response callback is IRadioResponse.setIndicationFilterResponse()
*/
oneway setIndicationFilter(int32_t serial, bitfield<IndicationFilter> indicationFilter);
/**
* Set SIM card power state.
* Request is equivalent to inserting or removing the card.
*
* The radio modem must generate IRadioIndication.simStatusChanged() as if the SIM had been
* inserted or removed.
*
* @param serial Serial number of request
* @param powerUp True if powering up the sim card
*
* Response callback is IRadioResponse.setSimCardPowerResponse()
*/
oneway setSimCardPower(int32_t serial, bool powerUp);
/**
* When response type received from a radio indication or radio response is
* RadioIndicationType:UNSOLICITED_ACK_EXP or RadioResponseType:SOLICITED_ACK_EXP respectively,
* acknowledge the receipt of those messages by sending responseAcknowledgement().
*
*/
oneway responseAcknowledgement();
};
Reference in a new issue View git blame Copy permalink