tequilaOS/platform_hardware_interfaces
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
platform_hardware_interfaces/wifi/supplicant/1.0/ISupplicantStaNetwork.hal
Ningyuan Wang 94a07c4cdc Add missing document for supplicant hal, current.txt. 
**Note, hashes are being modified in place ONLY
because this interface has not yet been released
in a release of Android.

This adds additional information for setEapPhase2Method().
This also adds the missing error type for find(), stopFind(), and
reject().

Bug: 37254796
Test: compile
Change-Id: I35735a7ec6ca5d490219bb176f1d6c727432113f
2017-04-20 11:16:22 -07:00

1071 lines
36 KiB
Text
Raw Blame History

/*
* Copyright 2016 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package android.hardware.wifi.supplicant@1.0;
import ISupplicantNetwork;
import ISupplicantStaNetworkCallback;
/**
* Interface exposed by the supplicant for each station mode network
* configuration it controls.
*/
interface ISupplicantStaNetwork extends ISupplicantNetwork {
/**
* Size limits for some of the params used in this interface.
*/
enum ParamSizeLimits : uint32_t {
/** Max length of SSID param. */
SSID_MAX_LEN_IN_BYTES = 32,
/** Min length of PSK passphrase param. */
PSK_PASSPHRASE_MIN_LEN_IN_BYTES = 8,
/** Max length of PSK passphrase param. */
PSK_PASSPHRASE_MAX_LEN_IN_BYTES = 63,
/** Max number of WEP keys param. */
WEP_KEYS_MAX_NUM = 4,
/** Length of each WEP40 keys param. */
WEP40_KEY_LEN_IN_BYTES = 5,
/** Length of each WEP104 keys param. */
WEP104_KEY_LEN_IN_BYTES = 13,
};
/** Possble mask of values for KeyMgmt param. */
enum KeyMgmtMask : uint32_t {
WPA_EAP = 1 << 0,
WPA_PSK = 1 << 1,
NONE = 1 << 2,
IEEE8021X = 1 << 3,
FT_EAP = 1 << 5,
FT_PSK = 1 << 6,
OSEN = 1 << 15
};
/** Possble mask of values for Proto param. */
enum ProtoMask : uint32_t {
WPA = 1 << 0,
RSN = 1 << 1,
/** Unused 1 << 2 */
OSEN = 1 << 3
};
/** Possble mask of values for AuthAlg param. */
enum AuthAlgMask : uint32_t {
OPEN = 1 << 0,
SHARED = 1 << 1,
LEAP = 1 << 2
};
/** Possble mask of values for GroupCipher param. */
enum GroupCipherMask : uint32_t {
WEP40 = 1 << 1,
WEP104 = 1 << 2,
TKIP = 1 << 3,
CCMP = 1 << 4,
GTK_NOT_USED = 1 << 14
};
/** Possble mask of values for PairwiseCipher param. */
enum PairwiseCipherMask : uint32_t {
NONE = 1 << 0,
TKIP = 1 << 3,
CCMP = 1 << 4
};
/** Possble values for EapMethod param. */
enum EapMethod : uint32_t {
PEAP = 0,
TLS = 1,
TTLS = 2,
PWD = 3,
SIM = 4,
AKA = 5,
AKA_PRIME = 6,
WFA_UNAUTH_TLS = 7
};
/** Possble values for Phase2Method param. */
enum EapPhase2Method : uint32_t {
NONE = 0,
PAP = 1,
MSPAP = 2,
MSPAPV2 = 3,
GTC = 4,
SIM = 5,
AKA = 6,
AKA_PRIME = 7
};
/** Params of |sendNetworkEapSimGsmAuthResponse| request. (Refer RFC 4186) */
struct NetworkResponseEapSimGsmAuthParams {
uint8_t[8] kc;
uint8_t[4] sres;
};
/** Params of |sendNetworkEapSimUmtsAuthResponse| request. (Refer RFC 4187) */
struct NetworkResponseEapSimUmtsAuthParams {
vec<uint8_t> res;
uint8_t[16] ik;
uint8_t[16] ck;
};
/**
* Register for callbacks from this network.
*
* These callbacks are invoked for events that are specific to this network.
* Registration of multiple callback objects is supported. These objects must
* be automatically deleted when the corresponding client process is dead or
* if this network is removed.
*
* @param callback An instance of the |ISupplicantStaNetworkCallback| HIDL
* interface object.
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
registerCallback(ISupplicantStaNetworkCallback callback)
generates (SupplicantStatus status);
/**
* Setters for the various network params.
* These correspond to elements of |wpa_sssid| struct used internally by
* the supplicant to represent each network.
*/
/**
* Set SSID for this network.
*
* @param ssid value to set.
* Max length of |ParamSizeLimits.SSID_MAX_LEN_IN_BYTES|.
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
setSsid(Ssid ssid) generates (SupplicantStatus status);
/**
* Set the network to only connect to an AP with provided BSSID.
*
* @param bssid value to set.
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
setBssid(Bssid bssid) generates (SupplicantStatus status);
/**
* Set whether to send probe requests for this network (hidden).
*
* @param enable true to set, false otherwise.
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
setScanSsid(bool enable) generates (SupplicantStatus status);
/**
* Set key management mask for the network.
*
* @param keyMgmtMask value to set.
* Combination of |KeyMgmtMask| values.
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
setKeyMgmt(bitfield<KeyMgmtMask> keyMgmtMask) generates (SupplicantStatus status);
/**
* Set proto mask for the network.
*
* @param protoMask value to set.
* Combination of |ProtoMask| values.
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
setProto(bitfield<ProtoMask> protoMask) generates (SupplicantStatus status);
/**
* Set auth alg mask for the network.
*
* @param authAlgMask value to set.
* Combination of |ProtoMask| values.
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
setAuthAlg(bitfield<AuthAlgMask> authAlgMask) generates (SupplicantStatus status);
/**
* Set group cipher mask for the network.
*
* @param groupCipherMask value to set.
* Combination of |ProtoMask| values.
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
setGroupCipher(bitfield<GroupCipherMask> groupCipherMask)
generates (SupplicantStatus status);
/**
* Set pairwise cipher mask for the network.
*
* @param pairwiseCipherMask value to set.
* Combination of |ProtoMask| values.
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
setPairwiseCipher(bitfield<PairwiseCipherMask> pairwiseCipherMask)
generates (SupplicantStatus status);
/**
* Set passphrase for WPA_PSK network.
*
* @param psk value to set.
* Length of value must be between
* |ParamSizeLimits.PSK_PASSPHRASE_MIN_LEN_IN_BYTES| and
* |ParamSizeLimits.PSK_PASSPHRASE_MAX_LEN_IN_BYTES|.
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
setPskPassphrase(string psk) generates (SupplicantStatus status);
/**
* Set raw psk for WPA_PSK network.
*
* @param psk value to set as specified in IEEE 802.11i-2004 standard.
* This is the calculated using 'wpa_passphrase <ssid> [passphrase]'
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
setPsk(uint8_t[32] psk) generates (SupplicantStatus status);
/**
* Set WEP key for WEP network.
*
* @param keyIdx Index of wep key to set.
* Max of |ParamSizeLimits.WEP_KEYS_MAX_NUM|.
* @param wepKey value to set.
* Length of each key must be either
* |ParamSizeLimits.WEP40_KEY_LEN_IN_BYTES| or
* |ParamSizeLimits.WEP104_KEY_LEN_IN_BYTES|.
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
setWepKey(uint32_t keyIdx, vec<uint8_t> wepKey)
generates (SupplicantStatus status);
/**
* Set default Tx key index for WEP network.
*
* @param KeyIdx value to set.
* Max of |ParamSizeLimits.WEP_KEYS_MAX_NUM|.
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
setWepTxKeyIdx(uint32_t keyIdx)
generates (SupplicantStatus status);
/**
* Set whether RequirePmf is enabled for this network.
*
* @param enable true to set, false otherwise.
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
setRequirePmf(bool enable) generates (SupplicantStatus status);
/**
* Set EAP Method for this network.
*
* @param method value to be set.
* Must be one of |EapMethod| values.
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
setEapMethod(EapMethod method)
generates (SupplicantStatus status);
/**
* Set EAP Phase2 Method for this network.
*
* EAP method needs to be set for this to work.
*
* @param method value to set.
* Must be one of |EapPhase2Method| values.
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
setEapPhase2Method(EapPhase2Method method)
generates (SupplicantStatus status);
/**
* Set EAP Identity for this network.
*
* @param identity value to set.
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
setEapIdentity(vec<uint8_t> identity)
generates (SupplicantStatus status);
/**
* Set EAP Anonymous Identity for this network.
*
* @param identity value to set.
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
setEapAnonymousIdentity(vec<uint8_t> identity)
generates (SupplicantStatus status);
/**
* Set EAP Password for this network.
*
* @param password value to set.
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
setEapPassword(vec<uint8_t> password)
generates (SupplicantStatus status);
/**
* Set EAP CA certificate file path for this network.
*
* @param path value to set.
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
setEapCACert(string path) generates (SupplicantStatus status);
/**
* Set EAP CA certificate directory path for this network.
*
* @param path value to set.
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
setEapCAPath(string path) generates (SupplicantStatus status);
/**
* Set EAP Client certificate file path for this network.
*
* @param path value to set.
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
setEapClientCert(string path) generates (SupplicantStatus status);
/**
* Set EAP private key Id for this network.
* This is used if private key operations for EAP-TLS are performed
* using a smartcard.
*
* @param id value to set.
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
setEapPrivateKeyId(string id) generates (SupplicantStatus status);
/**
* Set EAP subject match for this network.
*
* @param match value to set.
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
setEapSubjectMatch(string match) generates (SupplicantStatus status);
/**
* Set EAP Alt subject match for this network.
*
* @param match value to set.
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
setEapAltSubjectMatch(string match)
generates (SupplicantStatus status);
/**
* Enable EAP Open SSL Engine for this network.
*
* @param enable true to set, false otherwise.
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
setEapEngine(bool enable) generates (SupplicantStatus status);
/**
* Set EAP Open SSL Engine ID for this network.
*
* @param id value to set.
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
setEapEngineID(string id) generates (SupplicantStatus status);
/**
* Set EAP Domain suffix match for this network.
*
* @param match value to set.
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
setEapDomainSuffixMatch(string match)
generates (SupplicantStatus status);
/**
* This field can be used to enable proactive key caching which is also
* known as opportunistic PMKSA caching for WPA2. This is disabled (0)
* by default unless default value is changed with the global okc=1
* parameter.
*
* Proactive key caching is used to make supplicant assume that the APs
* are using the same PMK and generate PMKSA cache entries without
* doing RSN pre-authentication. This requires support from the AP side
* and is normally used with wireless switches that co-locate the
* authenticator.
*
* @param enable true to set, false otherwise.
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
setProactiveKeyCaching(bool enable) generates (SupplicantStatus status);
/**
* Set ID string for this network.
* Network identifier string for external scripts.
*
* @return idStr ID string value to set.
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
setIdStr(string idStr) generates (SupplicantStatus status);
/**
* Set PPS MO ID for this network.
* (Hotspot 2.0 PerProviderSubscription/UpdateIdentifier)
*
* @return id ID value to set.
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
setUpdateIdentifier(uint32_t id) generates (SupplicantStatus status);
/**
* Getters for the various network params.
*/
/**
* Get SSID for this network.
*
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
* @return ssid value set.
*/
getSsid() generates (SupplicantStatus status, Ssid ssid);
/**
* Get the BSSID set for this network.
*
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
* @return bssid value set.
*/
getBssid() generates (SupplicantStatus status, Bssid bssid);
/**
* Get whether Probe Requests are being sent for this network (hidden).
*
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
* @return enabled true if set, false otherwise.
*/
getScanSsid() generates (SupplicantStatus status, bool enabled);
/**
* Get the key mgmt mask set for the network.
*
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
* @return keyMgmtMask Combination of |KeyMgmtMask| values.
*/
getKeyMgmt()
generates (SupplicantStatus status, bitfield<KeyMgmtMask> keyMgmtMask);
/**
* Get the proto mask set for the network.
*
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
* @return protoMask Combination of |ProtoMask| values.
*/
getProto() generates (SupplicantStatus status, bitfield<ProtoMask> protoMask);
/**
* Get the auth alg mask set for the network.
*
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
* @return authAlgMask Combination of |AuthAlgMask| values.
*/
getAuthAlg()
generates (SupplicantStatus status, bitfield<AuthAlgMask> authAlgMask);
/**
* Get the group cipher mask set for the network.
*
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
* @return groupCipherMask Combination of |GroupCipherMask| values.
*/
getGroupCipher()
generates (SupplicantStatus status,
bitfield<GroupCipherMask> groupCipherMask);
/**
* Get the pairwise cipher mask set for the network.
*
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
* @return pairwiseCipherMask Combination of |PairwiseCipherMask| values.
*/
getPairwiseCipher()
generates (SupplicantStatus status,
bitfield<PairwiseCipherMask> pairwiseCipherMask);
/**
* Get passphrase for WPA_PSK network.
* Must return a failure if network has no passphrase set (use |getPsk| if
* network was configured with raw psk instead).
*
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
* @return psk value set.
*/
getPskPassphrase() generates (SupplicantStatus status, string psk);
/**
* Get raw psk for WPA_PSK network.
*
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
* @param psk value set.
*/
getPsk() generates (SupplicantStatus status, uint8_t[32] psk);
/**
* Get WEP key for WEP network.
*
* @param keyIdx Index of wep key to be fetched.
* Max of |WEP_KEYS_MAX_NUM|.
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
* @return wepKey value set.
*/
getWepKey(uint32_t keyIdx)
generates (SupplicantStatus status, vec<uint8_t> wepKey);
/**
* Get default Tx key index for WEP network.
*
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
* @return keyIdx value set.
*/
getWepTxKeyIdx()
generates (SupplicantStatus status, uint32_t keyIdx);
/**
* Get whether RequirePmf is enabled for this network.
*
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
* @return enabled true if set, false otherwise.
*/
getRequirePmf() generates (SupplicantStatus status, bool enabled);
/**
* Get EAP Method set for this network.
*
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
* @return method value set.
* Must be one of |EapMethod| values.
*/
getEapMethod()
generates (SupplicantStatus status, EapMethod method);
/**
* Get EAP Phase2 Method set for this network.
*
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
* @return method value set.
* Must be one of |EapPhase2Method| values.
*/
getEapPhase2Method()
generates (SupplicantStatus status, EapPhase2Method method);
/**
* Get EAP Identity set for this network.
*
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
* @return identity value set.
*/
getEapIdentity()
generates (SupplicantStatus status, vec<uint8_t> identity);
/**
* Get EAP Anonymous Identity set for this network.
*
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
* @return identity value set.
*/
getEapAnonymousIdentity()
generates (SupplicantStatus status, vec<uint8_t> identity);
/**
* Get EAP Password set for this network.
*
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
* @return password value set.
*/
getEapPassword()
generates (SupplicantStatus status, vec<uint8_t> password);
/**
* Get EAP CA certificate file path set for this network.
*
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
* @return path value set.
*/
getEapCACert() generates (SupplicantStatus status, string path);
/**
* Get EAP CA certificate directory path set for this network.
*
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
* @return path value set.
*/
getEapCAPath() generates (SupplicantStatus status, string path);
/**
* Get EAP Client certificate file path set for this network.
*
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
* @return path value set.
*/
getEapClientCert() generates (SupplicantStatus status, string path);
/**
* Get EAP private key Id set for this network.
*
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
* @return id value set.
*/
getEapPrivateKeyId() generates (SupplicantStatus status, string id);
/**
* Get EAP subject match set for this network.
*
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
* @return match value set.
*/
getEapSubjectMatch() generates (SupplicantStatus status, string match);
/**
* Get EAP Alt subject match set for this network.
*
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
* @return match value set.
*/
getEapAltSubjectMatch()
generates (SupplicantStatus status, string match);
/**
* Get if EAP Open SSL Engine is enabled for this network.
*
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
* @return enabled true if set, false otherwise.
*/
getEapEngine() generates (SupplicantStatus status, bool enabled);
/**
* Get EAP Open SSL Engine ID set for this network.
*
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
* @return id value set.
*/
getEapEngineID() generates (SupplicantStatus status, string id);
/**
* Get EAP Domain suffix match set for this network.
*
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
* @return match value set.
*/
getEapDomainSuffixMatch()
generates (SupplicantStatus status, string match);
/**
* Get ID string set for this network.
* Network identifier string for external scripts.
*
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
* @return idStr ID string set.
*/
getIdStr() generates (SupplicantStatus status, string idStr);
/**
* Retrieves a WPS-NFC configuration token for this network.
*
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
* @return token Bytes representing WPS-NFC configuration token.
* This is a dump of all the WPS atrributes of the AP configuration
* as specified in the Wi-Fi Protected Setup Specification.
*/
getWpsNfcConfigurationToken()
generates (SupplicantStatus status, vec<uint8_t> token);
/**
* Enable the network for connection purposes.
*
* This must trigger a connection to the network if:
* a) |noConnect| is false, and
* b) This is the only network configured, and
* c) Is visible in the current scan results.
*
* @param noConnect Only enable the network, dont trigger a connect.
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
enable(bool noConnect) generates (SupplicantStatus status);
/**
* Disable the network for connection purposes.
*
* This must trigger a disconnection from the network, if currently
* connected to this one.
*
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
disable() generates (SupplicantStatus status);
/**
* Initiate connection to this network.
*
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
select() generates (SupplicantStatus status);
/**
* Used to send a response to the
* |ISupplicantNetworkCallback.onNetworkEapSimGsmAuthRequest| request.
*
* @param params Params to be used for EAP GSM authentication.
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
sendNetworkEapSimGsmAuthResponse(vec<NetworkResponseEapSimGsmAuthParams> params)
generates (SupplicantStatus status);
/**
* Used to send a response to the
* |ISupplicantNetworkCallback.onNetworkEapSimGsmAuthRequest| request.
*
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
sendNetworkEapSimGsmAuthFailure() generates (SupplicantStatus status);
/**
* Used to send a response to the
* |ISupplicantNetworkCallback.onNetworkEapSimUmtsAuthRequest| request.
*
* @param params Params to be used for EAP UMTS authentication.
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
sendNetworkEapSimUmtsAuthResponse(NetworkResponseEapSimUmtsAuthParams params)
generates (SupplicantStatus status);
/**
* Used to send a response to the
* |ISupplicantNetworkCallback.onNetworkEapSimUmtsAuthRequest| request.
*
* @param auts Params to be used for EAP UMTS authentication.
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
sendNetworkEapSimUmtsAutsResponse(uint8_t[14] auts)
generates (SupplicantStatus status);
/**
* Used to send a response to the
* |ISupplicantNetworkCallback.onNetworkEapSimUmtsAuthRequest| request.
*
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
sendNetworkEapSimUmtsAuthFailure() generates (SupplicantStatus status);
/**
* Used to send a response to the
* |ISupplicantNetworkCallback.onNetworkEapIdentityRequest| request.
*
* @param identity Identity to be used for the network.
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
sendNetworkEapIdentityResponse(vec<uint8_t> identity)
generates (SupplicantStatus status);
};
Reference in a new issue View git blame Copy permalink