platform_hardware_interfaces/radio/1.4/IRadio.hal

/*
 * Copyright (C) 2018 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

package android.hardware.radio@1.4;

import @1.0::Dial;
import @1.2::DataRequestReason;
import @1.2::NetworkScanRequest;
import @1.3::IRadio;
import @1.4::AccessNetwork;
import @1.4::CarrierRestrictionsWithPriority;
import @1.4::DataProfileInfo;
import @1.4::EmergencyCallRouting;
import @1.4::EmergencyServiceCategory;
import @1.4::RadioAccessFamily;
import @1.4::SimLockMultiSimPolicy;

/**
 * This interface is used by telephony and telecom to talk to cellular radio.
 * All the functions have minimum one parameter:
 * serial: which corresponds to serial no. of request. Serial numbers must only be memorized for the
 * duration of a method call. If clients provide colliding serials (including passing the same
 * serial to different methods), multiple responses (one for each method call) must still be served.
 * setResponseFunctions must work with @1.1::IRadioResponse and @1.1::IRadioIndication.
 */
interface IRadio extends @1.3::IRadio {
    /**
     * Setup a packet data connection. If DataCallResponse.status returns DataCallFailCause:NONE,
     * the data connection must be added to data calls and a unsolDataCallListChanged() must be
     * sent. The call remains until removed by subsequent unsolDataCallIstChanged(). It may be
     * lost due to many factors, including deactivateDataCall() being issued, the radio powered
     * off, reception lost or even transient factors like congestion. This data call list is
     * returned by getDataCallList() and dataCallListChanged().
     *
     * The Radio is expected to:
     *   - Create one data call context.
     *   - Create and configure a dedicated interface for the context.
     *   - The interface must be point to point.
     *   - The interface is configured with one or more addresses and is capable of sending and
     *     receiving packets. The prefix length of the addresses must be /32 for IPv4 and /128
     *     for IPv6.
     *   - Must not modify routing configuration related to this interface; routing management is
     *     exclusively within the purview of the Android OS.
     *   - Support simultaneous data call contexts up to DataRegStateResult.maxDataCalls specified
     *     in the response of getDataRegistrationState.
     *
     * @param serial Serial number of request.
     * @param accessNetwork The access network to setup the data call. If the data connection cannot
     *     be established on the specified access network, the setup request must be failed.
     * @param dataProfileInfo Data profile info.
     * @param roamingAllowed Indicates whether or not data roaming is allowed by the user.
     * @param reason The request reason. Must be DataRequestReason.NORMAL or
     *     DataRequestReason.HANDOVER.
     * @param addresses If the reason is DataRequestReason.HANDOVER, this indicates the list of link
     *     addresses of the existing data connection. The format is IP address with optional "/"
     *     prefix length (The format is defined in RFC-4291 section 2.3). For example, "192.0.1.3",
     *     "192.0.1.11/16", or "2001:db8::1/64". Typically one IPv4 or one IPv6 or one of each. If
     *     the prefix length is absent, then the addresses are assumed to be point to point with
     *     IPv4 with prefix length 32 or IPv6 with prefix length 128. This parameter must be ignored
     *     unless reason is DataRequestReason.HANDOVER.
     * @param dnses If the reason is DataRequestReason.HANDOVER, this indicates the list of DNS
     *     addresses of the existing data connection. The format is defined in RFC-4291 section
     *     2.2. For example, "192.0.1.3" or "2001:db8::1". This parameter must be ignored unless
     *     reason is DataRequestReason.HANDOVER.
     *
     * Response function is IRadioResponse.setupDataCallResponse()
     *
     * Note this API is same as 1.2 version except using the 1.4 AccessNetwork as the input param.
     */
    oneway setupDataCall_1_4(int32_t serial, AccessNetwork accessNetwork,
            DataProfileInfo dataProfileInfo, bool roamingAllowed,
            DataRequestReason reason, vec<string> addresses, vec<string> dnses);

    /**
     * Set an apn to initial attach network
     *
     * @param serial Serial number of request.
     * @param dataProfileInfo data profile containing APN settings
     *
     * Response callback is IRadioResponse.setInitialAttachApnResponse()
     */
    oneway setInitialAttachApn_1_4(int32_t serial, DataProfileInfo dataProfileInfo);

    /**
     * Send data profiles of the current carrier to the modem.
     *
     * @param serial Serial number of request.
     * @param profiles Array of DataProfile to set.
     *
     * Response callback is IRadioResponse.setDataProfileResponse()
     */
    oneway setDataProfile_1_4(int32_t serial, vec<DataProfileInfo> profiles);

    /**
     * Initiate emergency voice call, with zero or more emergency service category(s), zero or
     * more emergency Uniform Resource Names (URN), and routing information for handling the call.
     * Android uses this request to make its emergency call instead of using @1.0::IRadio.dial
     * if the 'address' in the 'dialInfo' field is identified as an emergency number by Android.
     *
     * In multi-sim scenario, if the emergency number is from a specific subscription, this radio
     * request is sent through the IRadio service that serves the subscription, no matter of the
     * PUK/PIN state of the subscription and the service state of the radio.
     *
     * Some countries or carriers require some emergency numbers that must be handled with normal
     * call routing if possible or emergency routing. 1) if the 'routing' field is specified as
     * @1.4::EmergencyNumberRouting#NORMAL, the implementation must try the full radio service to
     * use normal call routing to handle the call; if service cannot support normal routing, the
     * implementation must use emergency routing to handle the call. 2) if 'routing' is specified
     * as @1.4::EmergencyNumberRouting#EMERGENCY, the implementation must use emergency routing to
     * handle the call. 3) if 'routing' is specified as @1.4::EmergencyNumberRouting#UNKNOWN,
     * Android does not know how to handle the call.
     *
     * If the dialed emergency number does not have a specified emergency service category, the
     * 'categories' field is set to @1.4::EmergencyServiceCategory#UNSPECIFIED; if the dialed
     * emergency number does not have specified emergency Uniform Resource Names, the 'urns' field
     * is set to an empty list. If the underlying technology used to request emergency services
     * does not support the emergency service category or emergency uniform resource names, the
     * field 'categories' or 'urns' may be ignored.
     *
     * In the scenarios that the 'address' in the 'dialInfo' field has other functions besides the
     * emergency number function, if the 'hasKnownUserIntentEmergency' field is true, the user's
     * intent for this dial request is emergency call, and the modem must treat this as an actual
     * emergency dial; if the 'hasKnownUserIntentEmergency' field is false, Android does not know
     * user's intent for this call.
     *
     * If 'isTesting' is true, this request is for testing purpose, and must not be sent to a real
     * emergency service; otherwise it's for a real emergency call request.
     *
     * Reference: 3gpp 22.101, Section 10 - Emergency Calls;
     *            3gpp 23.167, Section 6 - Functional description;
     *            3gpp 24.503, Section 5.1.6.8.1 - General;
     *            RFC 5031
     *
     * @param serial Serial number of request.
     * @param dialInfo the same @1.0::Dial information used by @1.0::IRadio.dial.
     * @param categories bitfield<@1.4::EmergencyServiceCategory> the Emergency Service Category(s)
     *     of the call.
     * @param urns the emergency Uniform Resource Names (URN)
     * @param routing @1.4::EmergencyCallRouting the emergency call routing information.
     * @param hasKnownUserIntentEmergency Flag indicating if user's intent for the emergency call
     *     is known.
     * @param isTesting Flag indicating if this request is for testing purpose.
     *
     * Response function is IRadioResponse.emergencyDialResponse()
     */
    oneway emergencyDial(int32_t serial, Dial dialInfo,
            bitfield<EmergencyServiceCategory> categories, vec<string> urns,
            EmergencyCallRouting routing, bool hasKnownUserIntentEmergency, bool isTesting);

    /**
     * Starts a network scan
     *
     * @param serial Serial number of request.
     * @param request Defines the radio networks/bands/channels which need to be scanned.
     *
     * Same API as @1.2::IRadio.startNetworkScan_1_2, except using the
     * @1.4::IRadioResponse.startNetworkScanResponse_1_4 as the response.
     */
    oneway startNetworkScan_1_4(int32_t serial, NetworkScanRequest request);

    /**
     * Query the preferred network type bitmap.
     *
     * @param serial Serial number of request.
     *
     * Response callback is IRadioResponse.getPreferredNetworkTypeBitmapResponse()
     */
    oneway getPreferredNetworkTypeBitmap(int32_t serial);

    /**
     * Requests to set the preferred network type for searching and registering.
     *
     * @param serial Serial number of request.
     * @param networkTypeBitmap a 32-bit bitmap of RadioAccessFamily.
     *
     * Response callback is IRadioResponse.setPreferredNetworkTypeBitmapResponse()
     */
    oneway setPreferredNetworkTypeBitmap(
            int32_t serial, bitfield<RadioAccessFamily> networkTypeBitmap);

    /**
     * Set carrier restrictions. Expected modem behavior:
     *  If never receives this command:
     *  - Must allow all carriers
     *  Receives this command:
     *  - Only allow carriers specified in carriers. The restriction persists across power cycles
     *    and FDR. If a present SIM is allowed, modem must not reload the SIM. If a present SIM is
     *    *not* allowed, modem must detach from the registered network and only keep emergency
     *    service, and notify Android SIM refresh reset with new SIM state being
     *    CardState:RESTRICTED. Emergency service must be enabled.
     *
     * @param serial Serial number of request.
     * @param carriers CarrierRestrictionsWithPriority consisting allowed and excluded carriers
     *        as defined in types.hal
     * @param multiSimPolicy Policy to be used for devices with multiple SIMs.
     *
     * Response callback is IRadioResponse.setAllowedCarriersResponse_1_4()
     */
    oneway setAllowedCarriers_1_4(int32_t serial, CarrierRestrictionsWithPriority carriers,
            SimLockMultiSimPolicy multiSimPolicy);

    /**
     * Get carrier restrictions.
     *
     * @param serial Serial number of request.
     *
     * Response callback is IRadioResponse.getAllowedCarriersResponse_1_4()
     */
    oneway getAllowedCarriers_1_4(int32_t serial);

    /**
     * Requests current signal strength and associated information.  Must succeed if radio is on.
     *
     * @param serial Serial number of request.
     *
     * Response function is IRadioResponse.getSignalStrengthResponse_1_4()
     */
    oneway getSignalStrength_1_4(int32_t serial);
};