(cherry picked from commit d245968b7ef0be5c776c9aefff3eca9e293d1b35)
> Extend the audio HAL interface to support get/set master mute
>
> Hand merge from ics-aah
>
> > Extend the audio HAL interface to support get/set master mute: DO NOT MERGE
> >
> > Extend the audio HAL interface to allow HALs to optionally support HW
> > level master mute. This follows the same pattern as master volume and
> > is part of the fix for bug 6828363. Because of the divergences
> > between ICS and master, this change will need to be merged by hand.
> >
> > Signed-off-by: John Grossman <johngro@google.com>
> > Change-Id: Ica6f5e37e13d13dde60463966f41f271ffa104fd
>
> Change-Id: I5e7aea6d7da0012dcc077281f9077fc04cfb9889
> Signed-off-by: John Grossman <johngro@google.com>
Change-Id: I2011cc5bc41ca7081ce255a4bfba65f36f899bc4
Signed-off-by: John Grossman <johngro@google.com>
The new version adds an acquire and release fence to each layer,
providing explicit producer->hwc and hwc->producer synchronization.
Change-Id: Ibd6e3c7b3515c012c767246e6d6514274fdef01d
Also don't clear card and device when out_set_parameters is called
to set other parameters.
Change-Id: I4feda9f6a2e76cb45bbc8a8f8256bb1760302707
Signed-off-by: Mike Lockwood <lockwood@google.com>
Modified open output and input stream functions to add new
parameters needed by audio HAL. Also grouped parameters
in a config structure for clarity.
Change-Id: I60832d8e5b5e4a48f209a6d83f5ca9c044be61f1
Add I2C slave address. Multiple I2C addresses are possible
for PN544 module. Configure address according to board design.
Change-Id: I847e8f3db631f5039cf15143a9982f4b9b209f27
This is a squashed merge of the following changes:
Commit f560da61a5e128ca9f82f7fe939afcf1f09188c7
Author: John Grossman <johngro@google.com>
Date: Thu Aug 11 15:34:55 2011 -0700
Fill out a missing entry in the audio HAL function table.
The entry for get_initial_master_volume was missing from the non-legacy audio
HAL and needs to be filled out. Also fix up the order of the comments
describing the get_initial_master_volume method.
Change-Id: I87d5415ef92611497a6dab4c657fc00367c4d80b
commit cea82facb63fd237a4ea6fb770605fcb500850ff
Author: Jason Simmons <jsimmons@google.com>
Date: Thu Jun 16 14:24:24 2011 -0700
Define a replacement for getSampleDelta that returns a DMA start time and count of samples queued
Change-Id: I2d13f57b5a8c5b97fb3aa0a90834ce91c56864ef
commit 60a9acd7eee470a8d870218e8be618bfa3be15a5
Author: Mike J. Chen <mjchen@google.com>
Date: Tue Jun 7 09:13:23 2011 -0700
Add Android@Home extensions to new Audio HAL interface.
Change-Id: I3ea4676d4b7d2afd78a5a7a7003ad5c437276d05
Signed-off-by: Mike J. Chen <mjchen@google.com>
Change-Id: I09f3756d12a1ce4f9af39610ed857890742a72df
Signed-off-by: Mike J. Chen <mjchen@google.com>
Signed-off-by: John Grossman <johngro@google.com>
Conflicts:
include/hardware/audio.h
modules/audio/audio_hw.c
This is a squashed merge of the following changes:
commit 9def1ae65f6b4d6a8fdec147fdcd34f22f08174a
Author: John Grossman <johngro@google.com>
Date: Fri Aug 12 11:47:20 2011 -0700
Change the signature of set_local_slew.
Changed the definition of the slew function in the local time HAL to take an
int16 instead of an int32 and to use the full range of the int instead of
attempting to imply any particular PPM range.
Change-Id: Ia67f50e77f1fe674a63ec69460e830d1191ef5a0
commit afab51327453d1bfc7423f8ce7a28933d8fc49b2
Author: John Grossman <johngro@google.com>
Date: Mon Jun 27 17:29:07 2011 -0700
Remove "primary" from the local_time HAL.
Interface instances are a pattern which should only be used by audio. Remove
its use from the local_time HAL.
Change-Id: If4c458cf16a02d9dc63c04185111ae793fc57801
commit 1c26e59a66e75ccb31027f42183aaa32bde6e456
Author: John Grossman <johngro@google.com>
Date: Fri Jun 17 14:19:24 2011 -0700
Refactor the local/common clock services.
This change is one of a set of 5 changes made to different repositories. Look
for this comment in all of them.
Refactor the local/common clock services to match android best
practice. Notable changes include
+ The kernel no longer knows anything about common time. Common time has been
moved completely up into user land. This has an impact on the accuracy of the
timesync debugging code, and the netfilter assisted approach to network based
timesync is going to have to be modified.
+ The timesync driver used by A@H is now just local time driver.
+ The kernel no longer needs access to the linear transform math code, and it
has been removed.
+ A new HAL has been introduced to expose the concept of local time to the
system.
+ A non-slewable stub implementation of the local time HAL based on
CLOCK_MONOTONIC has been added.
+ The old library has been eliminated. Its functionality has been
distributed among the common time binder service, the local time hal and the
linear transform utility code.
+ All clients of the old library have been changed to be clients of
the binder service, the hal and the utility code.
+ The reset_tt utilities have been removed, they no longer have a purpose in the
system.
Change-Id: I39843b94f9b6d13f63b22145a2edcafe4ca87349
Change-Id: Ib264c992d564b99ef7c7847a788e4fa7f5e101b4
Signed-off-by: Mike J. Chen <mjchen@google.com>
Signed-off-by: John Grossman <johngro@google.com>
Conflicts:
modules/Android.mk
Improve volume management by keeping track of volume for each type
of device independently.
Added functions at the audio policy interface to set and get stream volume
for a particular device.
Change-Id: Ic8899e82e48193cb65b3673e9d20383efed943b5
First implementation of a NFC HAL. This implementation doesn't
offer a generic NFC device HAL (yet), but offers typed interfaces
for different NFC controllers. Currently only the PN544 is supported.
Change-Id: I3ac04dcd767fb12a433edbe88ec7068eb1930a57
Added a method on audio policy interface to register
audio effect CPU usage on enable and unregister on disable
instead of when the effect is created or destroyed.
Change-Id: Iee20bf70fee7302f817ec4c7d9bf7640caca2e95
