/* * Copyright (C) 2012 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ // FIXME: add well-defined names for cameras #ifndef ANDROID_INCLUDE_CAMERA_COMMON_H #define ANDROID_INCLUDE_CAMERA_COMMON_H #include #include #include #include #include #include #include #include #include __BEGIN_DECLS /** * The id of this module */ #define CAMERA_HARDWARE_MODULE_ID "camera" /** * Module versioning information for the Camera hardware module, based on * camera_module_t.common.module_api_version. The two most significant hex * digits represent the major version, and the two least significant represent * the minor version. * ******************************************************************************* * Versions: 0.X - 1.X [CAMERA_MODULE_API_VERSION_1_0] * * Camera modules that report these version numbers implement the initial * camera module HAL interface. All camera devices openable through this * module support only version 1 of the camera device HAL. The device_version * and static_camera_characteristics fields of camera_info are not valid. Only * the android.hardware.Camera API can be supported by this module and its * devices. * ******************************************************************************* * Version: 2.0 [CAMERA_MODULE_API_VERSION_2_0] * * Camera modules that report this version number implement the second version * of the camera module HAL interface. Camera devices openable through this * module may support either version 1.0 or version 2.0 of the camera device * HAL interface. The device_version field of camera_info is always valid; the * static_camera_characteristics field of camera_info is valid if the * device_version field is 2.0 or higher. * ******************************************************************************* * Version: 2.1 [CAMERA_MODULE_API_VERSION_2_1] * * This camera module version adds support for asynchronous callbacks to the * framework from the camera HAL module, which is used to notify the framework * about changes to the camera module state. Modules that provide a valid * set_callbacks() method must report at least this version number. * ******************************************************************************* * Version: 2.2 [CAMERA_MODULE_API_VERSION_2_2] * * This camera module version adds vendor tag support from the module, and * deprecates the old vendor_tag_query_ops that were previously only * accessible with a device open. * ******************************************************************************* * Version: 2.3 [CAMERA_MODULE_API_VERSION_2_3] * * This camera module version adds open legacy camera HAL device support. * Framework can use it to open the camera device as lower device HAL version * HAL device if the same device can support multiple device API versions. * The standard hardware module open call (common.methods->open) continues * to open the camera device with the latest supported version, which is * also the version listed in camera_info_t.device_version. * ******************************************************************************* * Version: 2.4 [CAMERA_MODULE_API_VERSION_2_4] * * This camera module version adds below API changes: * * 1. Torch mode support. The framework can use it to turn on torch mode for * any camera device that has a flash unit, without opening a camera device. The * camera device has a higher priority accessing the flash unit than the camera * module; opening a camera device will turn off the torch if it had been enabled * through the module interface. When there are any resource conflicts, such as * open() is called to open a camera device, the camera HAL module must notify the * framework through the torch mode status callback that the torch mode has been * turned off. * * 2. External camera (e.g. USB hot-plug camera) support. The API updates specify that * the camera static info is only available when camera is connected and ready to * use for external hot-plug cameras. Calls to get static info will be invalid * calls when camera status is not CAMERA_DEVICE_STATUS_PRESENT. The frameworks * will only count on device status change callbacks to manage the available external * camera list. * * 3. Camera arbitration hints. This module version adds support for explicitly * indicating the number of camera devices that can be simultaneously opened and used. * To specify valid combinations of devices, the resource_cost and conflicting_devices * fields should always be set in the camera_info structure returned by the * get_camera_info call. */ /** * Predefined macros for currently-defined version numbers */ /** * All module versions <= HARDWARE_MODULE_API_VERSION(1, 0xFF) must be treated * as CAMERA_MODULE_API_VERSION_1_0 */ #define CAMERA_MODULE_API_VERSION_1_0 HARDWARE_MODULE_API_VERSION(1, 0) #define CAMERA_MODULE_API_VERSION_2_0 HARDWARE_MODULE_API_VERSION(2, 0) #define CAMERA_MODULE_API_VERSION_2_1 HARDWARE_MODULE_API_VERSION(2, 1) #define CAMERA_MODULE_API_VERSION_2_2 HARDWARE_MODULE_API_VERSION(2, 2) #define CAMERA_MODULE_API_VERSION_2_3 HARDWARE_MODULE_API_VERSION(2, 3) #define CAMERA_MODULE_API_VERSION_2_4 HARDWARE_MODULE_API_VERSION(2, 4) #define CAMERA_MODULE_API_VERSION_CURRENT CAMERA_MODULE_API_VERSION_2_4 /** * All device versions <= HARDWARE_DEVICE_API_VERSION(1, 0xFF) must be treated * as CAMERA_DEVICE_API_VERSION_1_0 */ #define CAMERA_DEVICE_API_VERSION_1_0 HARDWARE_DEVICE_API_VERSION(1, 0) #define CAMERA_DEVICE_API_VERSION_2_0 HARDWARE_DEVICE_API_VERSION(2, 0) #define CAMERA_DEVICE_API_VERSION_2_1 HARDWARE_DEVICE_API_VERSION(2, 1) #define CAMERA_DEVICE_API_VERSION_3_0 HARDWARE_DEVICE_API_VERSION(3, 0) #define CAMERA_DEVICE_API_VERSION_3_1 HARDWARE_DEVICE_API_VERSION(3, 1) #define CAMERA_DEVICE_API_VERSION_3_2 HARDWARE_DEVICE_API_VERSION(3, 2) #define CAMERA_DEVICE_API_VERSION_3_3 HARDWARE_DEVICE_API_VERSION(3, 3) // Device version 3.3 is current, older HAL camera device versions are not // recommended for new devices. #define CAMERA_DEVICE_API_VERSION_CURRENT CAMERA_DEVICE_API_VERSION_3_3 /** * Defined in /system/media/camera/include/system/camera_metadata.h */ typedef struct camera_metadata camera_metadata_t; typedef struct camera_info { /** * The direction that the camera faces to. See system/core/include/system/camera.h * for camera facing definitions. * * Version information (based on camera_module_t.common.module_api_version): * * CAMERA_MODULE_API_VERSION_2_3 or lower: * * It should be CAMERA_FACING_BACK or CAMERA_FACING_FRONT. * * CAMERA_MODULE_API_VERSION_2_4 or higher: * * It should be CAMERA_FACING_BACK, CAMERA_FACING_FRONT or * CAMERA_FACING_EXTERNAL. */ int facing; /** * The orientation of the camera image. The value is the angle that the * camera image needs to be rotated clockwise so it shows correctly on the * display in its natural orientation. It should be 0, 90, 180, or 270. * * For example, suppose a device has a naturally tall screen. The * back-facing camera sensor is mounted in landscape. You are looking at the * screen. If the top side of the camera sensor is aligned with the right * edge of the screen in natural orientation, the value should be 90. If the * top side of a front-facing camera sensor is aligned with the right of the * screen, the value should be 270. * * Version information (based on camera_module_t.common.module_api_version): * * CAMERA_MODULE_API_VERSION_2_3 or lower: * * Valid in all camera_module versions. * * CAMERA_MODULE_API_VERSION_2_4 or higher: * * Valid if camera facing is CAMERA_FACING_BACK or CAMERA_FACING_FRONT, * not valid if camera facing is CAMERA_FACING_EXTERNAL. */ int orientation; /** * The value of camera_device_t.common.version. * * Version information (based on camera_module_t.common.module_api_version): * * CAMERA_MODULE_API_VERSION_1_0: * * Not valid. Can be assumed to be CAMERA_DEVICE_API_VERSION_1_0. Do * not read this field. * * CAMERA_MODULE_API_VERSION_2_0 or higher: * * Always valid * */ uint32_t device_version; /** * The camera's fixed characteristics, which include all static camera metadata * specified in system/media/camera/docs/docs.html. This should be a sorted metadata * buffer, and may not be modified or freed by the caller. The pointer should remain * valid for the lifetime of the camera module, and values in it may not * change after it is returned by get_camera_info(). * * Version information (based on camera_module_t.common.module_api_version): * * CAMERA_MODULE_API_VERSION_1_0: * * Not valid. Extra characteristics are not available. Do not read this * field. * * CAMERA_MODULE_API_VERSION_2_0 or higher: * * Valid if device_version >= CAMERA_DEVICE_API_VERSION_2_0. Do not read * otherwise. * */ const camera_metadata_t *static_camera_characteristics; /** * The total resource "cost" of using this camera, represented as an integer * value in the range [0, 100] where 100 represents total usage of the shared * resource that is the limiting bottleneck of the camera subsystem. This may * be a very rough estimate, and is used as a hint to the camera service to * determine when to disallow multiple applications from simultaneously * opening different cameras advertised by the camera service. * * The camera service must be able to simultaneously open and use any * combination of camera devices exposed by the HAL where the sum of * the resource costs of these cameras is <= 100. For determining cost, * each camera device must be assumed to be configured and operating at * the maximally resource-consuming framerate and stream size settings * available in the configuration settings exposed for that device through * the camera metadata. * * The camera service may still attempt to simultaneously open combinations * of camera devices with a total resource cost > 100. This may succeed or * fail. If this succeeds, combinations of configurations that are not * supported due to resource constraints from having multiple open devices * should fail during the configure calls. If the total resource cost is * <= 100, open and configure should never fail for any stream configuration * settings or other device capabilities that would normally succeed for a * device when it is the only open camera device. * * This field will be used to determine whether background applications are * allowed to use this camera device while other applications are using other * camera devices. Note: multiple applications will never be allowed by the * camera service to simultaneously open the same camera device. * * Example use cases: * * Ex. 1: Camera Device 0 = Back Camera * Camera Device 1 = Front Camera * - Using both camera devices causes a large framerate slowdown due to * limited ISP bandwidth. * * Configuration: * * Camera Device 0 - resource_cost = 51 * conflicting_devices = null * Camera Device 1 - resource_cost = 51 * conflicting_devices = null * * Result: * * Since the sum of the resource costs is > 100, if a higher-priority * application has either device open, no lower-priority applications will be * allowed by the camera service to open either device. If a lower-priority * application is using a device that a higher-priority subsequently attempts * to open, the lower-priority application will be forced to disconnect the * the device. * * If the highest-priority application chooses, it may still attempt to open * both devices (since these devices are not listed as conflicting in the * conflicting_devices fields), but usage of these devices may fail in the * open or configure calls. * * Ex. 2: Camera Device 0 = Left Back Camera * Camera Device 1 = Right Back Camera * Camera Device 2 = Combined stereo camera using both right and left * back camera sensors used by devices 0, and 1 * Camera Device 3 = Front Camera * - Due to do hardware constraints, up to two cameras may be open at once. The * combined stereo camera may never be used at the same time as either of the * two back camera devices (device 0, 1), and typically requires too much * bandwidth to use at the same time as the front camera (device 3). * * Configuration: * * Camera Device 0 - resource_cost = 50 * conflicting_devices = { 2 } * Camera Device 1 - resource_cost = 50 * conflicting_devices = { 2 } * Camera Device 2 - resource_cost = 100 * conflicting_devices = { 0, 1 } * Camera Device 3 - resource_cost = 50 * conflicting_devices = null * * Result: * * Based on the conflicting_devices fields, the camera service guarantees that * the following sets of open devices will never be allowed: { 1, 2 }, { 0, 2 }. * * Based on the resource_cost fields, if a high-priority foreground application * is using camera device 0, a background application would be allowed to open * camera device 1 or 3 (but would be forced to disconnect it again if the * foreground application opened another device). * * The highest priority application may still attempt to simultaneously open * devices 0, 2, and 3, but the HAL may fail in open or configure calls for * this combination. * * Ex. 3: Camera Device 0 = Back Camera * Camera Device 1 = Front Camera * Camera Device 2 = Low-power Front Camera that uses the same * sensor as device 1, but only exposes image stream * resolutions that can be used in low-power mode * - Using both front cameras (device 1, 2) at the same time is impossible due * a shared physical sensor. Using the back and "high-power" front camera * (device 1) may be impossible for some stream configurations due to hardware * limitations, but the "low-power" front camera option may always be used as * it has special dedicated hardware. * * Configuration: * * Camera Device 0 - resource_cost = 100 * conflicting_devices = null * Camera Device 1 - resource_cost = 100 * conflicting_devices = { 2 } * Camera Device 2 - resource_cost = 0 * conflicting_devices = { 1 } * Result: * * Based on the conflicting_devices fields, the camera service guarantees that * the following sets of open devices will never be allowed: { 1, 2 }. * * Based on the resource_cost fields, only the highest priority application * may attempt to open both device 0 and 1 at the same time. If a higher-priority * application is not using device 1 or 2, a low-priority background application * may open device 2 (but will be forced to disconnect it if a higher-priority * application subsequently opens device 1 or 2). * * Version information (based on camera_module_t.common.module_api_version): * * CAMERA_MODULE_API_VERSION_2_3 or lower: * * Not valid. Can be assumed to be 100. Do not read this field. * * CAMERA_MODULE_API_VERSION_2_4 or higher: * * Always valid. */ int resource_cost; /** * An array of camera device IDs represented as NULL-terminated strings * indicating other devices that cannot be simultaneously opened while this * camera device is in use. * * This field is intended to be used to indicate that this camera device * is a composite of several other camera devices, or otherwise has * hardware dependencies that prohibit simultaneous usage. If there are no * dependencies, a NULL may be returned in this field to indicate this. * * The camera service will never simultaneously open any of the devices * in this list while this camera device is open. * * The strings pointed to in this field will not be cleaned up by the camera * service, and must remain while this device is plugged in. * * Version information (based on camera_module_t.common.module_api_version): * * CAMERA_MODULE_API_VERSION_2_3 or lower: * * Not valid. Can be assumed to be NULL. Do not read this field. * * CAMERA_MODULE_API_VERSION_2_4 or higher: * * Always valid. */ char** conflicting_devices; /** * The length of the array given in the conflicting_devices field. * * Version information (based on camera_module_t.common.module_api_version): * * CAMERA_MODULE_API_VERSION_2_3 or lower: * * Not valid. Can be assumed to be 0. Do not read this field. * * CAMERA_MODULE_API_VERSION_2_4 or higher: * * Always valid. */ size_t conflicting_devices_length; } camera_info_t; /** * camera_device_status_t: * * The current status of the camera device, as provided by the HAL through the * camera_module_callbacks.camera_device_status_change() call. * * At module load time, the framework will assume all camera devices are in the * CAMERA_DEVICE_STATUS_PRESENT state. The HAL should invoke * camera_module_callbacks::camera_device_status_change to inform the framework * of any initially NOT_PRESENT devices. * * Allowed transitions: * PRESENT -> NOT_PRESENT * NOT_PRESENT -> ENUMERATING * NOT_PRESENT -> PRESENT * ENUMERATING -> PRESENT * ENUMERATING -> NOT_PRESENT */ typedef enum camera_device_status { /** * The camera device is not currently connected, and opening it will return * failure. * * Version information (based on camera_module_t.common.module_api_version): * * CAMERA_MODULE_API_VERSION_2_3 or lower: * * Calls to get_camera_info must still succeed, and provide the same information * it would if the camera were connected. * * CAMERA_MODULE_API_VERSION_2_4: * * The camera device at this status must return -EINVAL for get_camera_info call, * as the device is not connected. */ CAMERA_DEVICE_STATUS_NOT_PRESENT = 0, /** * The camera device is connected, and opening it will succeed. * * CAMERA_MODULE_API_VERSION_2_3 or lower: * * The information returned by get_camera_info cannot change due to this status * change. By default, the framework will assume all devices are in this state. * * CAMERA_MODULE_API_VERSION_2_4: * * The information returned by get_camera_info will become valid after a device's * status changes to this. By default, the framework will assume all devices are in * this state. */ CAMERA_DEVICE_STATUS_PRESENT = 1, /** * The camera device is connected, but it is undergoing an enumeration and * so opening the device will return -EBUSY. * * CAMERA_MODULE_API_VERSION_2_3 or lower: * * Calls to get_camera_info must still succeed, as if the camera was in the * PRESENT status. * * CAMERA_MODULE_API_VERSION_2_4: * * The camera device at this status must return -EINVAL for get_camera_info for call, * as the device is not ready. */ CAMERA_DEVICE_STATUS_ENUMERATING = 2, } camera_device_status_t; /** * torch_mode_status_t: * * The current status of the torch mode, as provided by the HAL through the * camera_module_callbacks.torch_mode_status_change() call. * * The torch mode status of a camera device is applicable only when the camera * device is present. The framework will not call set_torch_mode() to turn on * torch mode of a camera device if the camera device is not present. At module * load time, the framework will assume torch modes are in the * TORCH_MODE_STATUS_OFF state if the camera device is present and * android.flash.info.available is reported as true via get_camera_info() call. * * The behaviors of the camera HAL module that the framework expects in the * following situations when a camera device's status changes: * 1. A previously-disconnected camera device becomes connected. * After camera_module_callbacks::camera_device_status_change() is invoked * to inform the framework that the camera device is present, the framework * will assume the camera device's torch mode is in * TORCH_MODE_STATUS_OFF state. The camera HAL module does not need * to invoke camera_module_callbacks::torch_mode_status_change() unless the * flash unit is unavailable to use by set_torch_mode(). * * 2. A previously-connected camera becomes disconnected. * After camera_module_callbacks::camera_device_status_change() is invoked * to inform the framework that the camera device is not present, the * framework will not call set_torch_mode() for the disconnected camera * device until its flash unit becomes available again. The camera HAL * module does not need to invoke * camera_module_callbacks::torch_mode_status_change() separately to inform * that the flash unit has become unavailable. * * 3. open() is called to open a camera device. * The camera HAL module must invoke * camera_module_callbacks::torch_mode_status_change() for all flash units * that have entered TORCH_MODE_STATUS_NOT_AVAILABLE state and can not be * turned on by calling set_torch_mode() anymore due to this open() call. * * 4. close() is called to close a camera device. * The camera HAL module must invoke * camera_module_callbacks::torch_mode_status_change() for all flash units * that have entered TORCH_MODE_STATUS_OFF state and can be turned * on by calling set_torch_mode() again because of enough resources freed * up by this close() call. * * Note that the framework calling set_torch_mode() successfully must trigger * TORCH_MODE_STATUS_OFF or TORCH_MODE_STATUS_ON callback for the given camera * device. Additionally it must trigger TORCH_MODE_STATUS_OFF callbacks for * other previously-on torch modes if HAL cannot keep multiple torch modes on * simultaneously. */ typedef enum torch_mode_status { /** * The flash unit is no longer available and the torch mode can not be * turned on by calling set_torch_mode(). If the torch mode is on, it * will be turned off by HAL before HAL calls torch_mode_status_change(). */ TORCH_MODE_STATUS_NOT_AVAILABLE = 0, /** * A torch mode has become off and available to be turned on via * set_torch_mode(). This may happen in the following * cases: * 1. After the resources to turn on the torch mode have become available. * 2. After set_torch_mode() is called to turn off the torch mode. * 3. After the framework turned on the torch mode of some other camera * device and HAL had to turn off the torch modes of any camera devices * that were previously on. */ TORCH_MODE_STATUS_AVAILABLE_OFF = 1, /** * A torch mode has become on and available to be turned off via * set_torch_mode(). This can happen only after set_torch_mode() is called * to turn on the torch mode. */ TORCH_MODE_STATUS_AVAILABLE_ON = 2, } torch_mode_status_t; /** * Callback functions for the camera HAL module to use to inform the framework * of changes to the camera subsystem. * * Version information (based on camera_module_t.common.module_api_version): * * Each callback is called only by HAL modules implementing the indicated * version or higher of the HAL module API interface. * * CAMERA_MODULE_API_VERSION_2_1: * camera_device_status_change() * * CAMERA_MODULE_API_VERSION_2_4: * torch_mode_status_change() */ typedef struct camera_module_callbacks { /** * camera_device_status_change: * * Callback to the framework to indicate that the state of a specific camera * device has changed. At module load time, the framework will assume all * camera devices are in the CAMERA_DEVICE_STATUS_PRESENT state. The HAL * must call this method to inform the framework of any initially * NOT_PRESENT devices. * * This callback is added for CAMERA_MODULE_API_VERSION_2_1. * * camera_module_callbacks: The instance of camera_module_callbacks_t passed * to the module with set_callbacks. * * camera_id: The ID of the camera device that has a new status. * * new_status: The new status code, one of the camera_device_status_t enums, * or a platform-specific status. * */ void (*camera_device_status_change)(const struct camera_module_callbacks*, int camera_id, int new_status); /** * torch_mode_status_change: * * Callback to the framework to indicate that the state of the torch mode * of the flash unit associated with a specific camera device has changed. * At module load time, the framework will assume the torch modes are in * the TORCH_MODE_STATUS_AVAILABLE state if android.flash.info.available * is reported as true via get_camera_info() call. * * This callback is added for CAMERA_MODULE_API_VERSION_2_4. * * camera_module_callbacks: The instance of camera_module_callbacks_t * passed to the module with set_callbacks. * * camera_id: The ID of camera device whose flash unit has a new torch mode * status. * * new_status: The new status code, one of the torch_mode_status_t enums. */ void (*torch_mode_status_change)(const struct camera_module_callbacks*, const char* camera_id, int new_status); } camera_module_callbacks_t; typedef struct camera_module { /** * Common methods of the camera module. This *must* be the first member of * camera_module as users of this structure will cast a hw_module_t to * camera_module pointer in contexts where it's known the hw_module_t * references a camera_module. * * The return values for common.methods->open for camera_module are: * * 0: On a successful open of the camera device. * * -ENODEV: The camera device cannot be opened due to an internal * error. * * -EINVAL: The input arguments are invalid, i.e. the id is invalid, * and/or the module is invalid. * * -EBUSY: The camera device was already opened for this camera id * (by using this method or open_legacy), * regardless of the device HAL version it was opened as. * * -EUSERS: The maximal number of camera devices that can be * opened concurrently were opened already, either by * this method or the open_legacy method. * * All other return values from common.methods->open will be treated as * -ENODEV. */ hw_module_t common; /** * get_number_of_cameras: * * Returns the number of camera devices accessible through the camera * module. The camera devices are numbered 0 through N-1, where N is the * value returned by this call. The name of the camera device for open() is * simply the number converted to a string. That is, "0" for camera ID 0, * "1" for camera ID 1. * * Version information (based on camera_module_t.common.module_api_version): * * CAMERA_MODULE_API_VERSION_2_3 or lower: * * The value here must be static, and cannot change after the first call * to this method. * * CAMERA_MODULE_API_VERSION_2_4 or higher: * * The value here must be static, and must count only built-in cameras, * which have CAMERA_FACING_BACK or CAMERA_FACING_FRONT camera facing values * (camera_info.facing). The HAL must not include the external cameras * (camera_info.facing == CAMERA_FACING_EXTERNAL) into the return value * of this call. Frameworks will use camera_device_status_change callback * to manage number of external cameras. */ int (*get_number_of_cameras)(void); /** * get_camera_info: * * Return the static camera information for a given camera device. This * information may not change for a camera device. * * Return values: * * 0: On a successful operation * * -ENODEV: The information cannot be provided due to an internal * error. * * -EINVAL: The input arguments are invalid, i.e. the id is invalid, * and/or the module is invalid. * * Version information (based on camera_module_t.common.module_api_version): * * CAMERA_MODULE_API_VERSION_2_4 or higher: * * When a camera is disconnected, its camera id becomes invalid. Calling this * this method with this invalid camera id will get -EINVAL and NULL camera * static metadata (camera_info.static_camera_characteristics). */ int (*get_camera_info)(int camera_id, struct camera_info *info); /** * set_callbacks: * * Provide callback function pointers to the HAL module to inform framework * of asynchronous camera module events. The framework will call this * function once after initial camera HAL module load, after the * get_number_of_cameras() method is called for the first time, and before * any other calls to the module. * * Version information (based on camera_module_t.common.module_api_version): * * CAMERA_MODULE_API_VERSION_1_0, CAMERA_MODULE_API_VERSION_2_0: * * Not provided by HAL module. Framework may not call this function. * * CAMERA_MODULE_API_VERSION_2_1: * * Valid to be called by the framework. * * Return values: * * 0: On a successful operation * * -ENODEV: The operation cannot be completed due to an internal * error. * * -EINVAL: The input arguments are invalid, i.e. the callbacks are * null */ int (*set_callbacks)(const camera_module_callbacks_t *callbacks); /** * get_vendor_tag_ops: * * Get methods to query for vendor extension metadata tag information. The * HAL should fill in all the vendor tag operation methods, or leave ops * unchanged if no vendor tags are defined. * * The vendor_tag_ops structure used here is defined in: * system/media/camera/include/system/vendor_tags.h * * Version information (based on camera_module_t.common.module_api_version): * * CAMERA_MODULE_API_VERSION_1_x/2_0/2_1: * Not provided by HAL module. Framework may not call this function. * * CAMERA_MODULE_API_VERSION_2_2: * Valid to be called by the framework. */ void (*get_vendor_tag_ops)(vendor_tag_ops_t* ops); /** * open_legacy: * * Open a specific legacy camera HAL device if multiple device HAL API * versions are supported by this camera HAL module. For example, if the * camera module supports both CAMERA_DEVICE_API_VERSION_1_0 and * CAMERA_DEVICE_API_VERSION_3_2 device API for the same camera id, * framework can call this function to open the camera device as * CAMERA_DEVICE_API_VERSION_1_0 device. * * This is an optional method. A Camera HAL module does not need to support * more than one device HAL version per device, and such modules may return * -ENOSYS for all calls to this method. For all older HAL device API * versions that are not supported, it may return -EOPNOTSUPP. When above * cases occur, The normal open() method (common.methods->open) will be * used by the framework instead. * * Version information (based on camera_module_t.common.module_api_version): * * CAMERA_MODULE_API_VERSION_1_x/2_0/2_1/2_2: * Not provided by HAL module. Framework will not call this function. * * CAMERA_MODULE_API_VERSION_2_3: * Valid to be called by the framework. * * Return values: * * 0: On a successful open of the camera device. * * -ENOSYS This method is not supported. * * -EOPNOTSUPP: The requested HAL version is not supported by this method. * * -EINVAL: The input arguments are invalid, i.e. the id is invalid, * and/or the module is invalid. * * -EBUSY: The camera device was already opened for this camera id * (by using this method or common.methods->open method), * regardless of the device HAL version it was opened as. * * -EUSERS: The maximal number of camera devices that can be * opened concurrently were opened already, either by * this method or common.methods->open method. */ int (*open_legacy)(const struct hw_module_t* module, const char* id, uint32_t halVersion, struct hw_device_t** device); /** * set_torch_mode: * * Turn on or off the torch mode of the flash unit associated with a given * camera ID. If the operation is successful, HAL must notify the framework * torch state by invoking * camera_module_callbacks.torch_mode_status_change() with the new state. * * The camera device has a higher priority accessing the flash unit. When * there are any resource conflicts, such as open() is called to open a * camera device, HAL module must notify the framework through * camera_module_callbacks.torch_mode_status_change() that the * torch mode has been turned off and the torch mode state has become * TORCH_MODE_STATUS_NOT_AVAILABLE. When resources to turn on torch mode * become available again, HAL module must notify the framework through * camera_module_callbacks.torch_mode_status_change() that the torch mode * state has become TORCH_MODE_STATUS_OFF for set_torch_mode() to be called. * * When the framework calls set_torch_mode() to turn on the torch mode of a * flash unit, if HAL cannot keep multiple torch modes on simultaneously, * HAL should turn off the torch mode that was turned on by * a previous set_torch_mode() call and notify the framework that the torch * mode state of that flash unit has become TORCH_MODE_STATUS_OFF. * * Version information (based on camera_module_t.common.module_api_version): * * CAMERA_MODULE_API_VERSION_1_x/2_0/2_1/2_2/2_3: * Not provided by HAL module. Framework will not call this function. * * CAMERA_MODULE_API_VERSION_2_4: * Valid to be called by the framework. * * Return values: * * 0: On a successful operation. * * -ENOSYS: The camera device does not support this operation. It is * returned if and only if android.flash.info.available is * false. * * -EBUSY: The camera device is already in use. * * -EUSERS: The resources needed to turn on the torch mode are not * available, typically because other camera devices are * holding the resources to make using the flash unit not * possible. * * -EINVAL: camera_id is invalid. * */ int (*set_torch_mode)(const char* camera_id, bool enabled); /* reserved for future use */ void* reserved[6]; } camera_module_t; __END_DECLS #endif /* ANDROID_INCLUDE_CAMERA_COMMON_H */