platform_hardware_libhardware/include/hardware/hwcomposer_defs.h
Prashant Malani 02b31986cb hwcomposer: Add function pointer for setPowerMode() callback
The blank HWC call is being replaced by a setPowerMode() call.
This incorporates all of the blank functionality, but provides added
support for display low power modes, if they are available in hardware.

Currently there are three supported modes:
- HWC_POWER_MODE_OFF    : Turn screen off.
- HWC_POWER_MODE_DOZE   : Put screen in low power mode.
- HWC_POWER_MODE_NORMAL : Turn screen on, and exit low power mode (if
                          display was previously in low power mode).

Where applicable, the device driver is expected to retain and restore
the low power mode state of the display during entry and exit from
suspend, respectively.

Bug: 13472578
Change-Id: I743ea3a2cb58247d14d7c47158b09a5309cca710
Signed-off-by: Prashant Malani <pmalani@google.com>
2014-06-12 17:11:03 +00:00

213 lines
6.4 KiB
C

/*
* Copyright (C) 2010 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef ANDROID_INCLUDE_HARDWARE_HWCOMPOSER_DEFS_H
#define ANDROID_INCLUDE_HARDWARE_HWCOMPOSER_DEFS_H
#include <stdint.h>
#include <sys/cdefs.h>
#include <hardware/gralloc.h>
#include <hardware/hardware.h>
#include <cutils/native_handle.h>
__BEGIN_DECLS
/*****************************************************************************/
#define HWC_HEADER_VERSION 1
#define HWC_MODULE_API_VERSION_0_1 HARDWARE_MODULE_API_VERSION(0, 1)
#define HWC_DEVICE_API_VERSION_1_0 HARDWARE_DEVICE_API_VERSION_2(1, 0, HWC_HEADER_VERSION)
#define HWC_DEVICE_API_VERSION_1_1 HARDWARE_DEVICE_API_VERSION_2(1, 1, HWC_HEADER_VERSION)
#define HWC_DEVICE_API_VERSION_1_2 HARDWARE_DEVICE_API_VERSION_2(1, 2, HWC_HEADER_VERSION)
#define HWC_DEVICE_API_VERSION_1_3 HARDWARE_DEVICE_API_VERSION_2(1, 3, HWC_HEADER_VERSION)
#define HWC_DEVICE_API_VERSION_1_4 HARDWARE_DEVICE_API_VERSION_2(1, 4, HWC_HEADER_VERSION)
enum {
/* hwc_composer_device_t::set failed in EGL */
HWC_EGL_ERROR = -1
};
/*
* hwc_layer_t::hints values
* Hints are set by the HAL and read by SurfaceFlinger
*/
enum {
/*
* HWC can set the HWC_HINT_TRIPLE_BUFFER hint to indicate to SurfaceFlinger
* that it should triple buffer this layer. Typically HWC does this when
* the layer will be unavailable for use for an extended period of time,
* e.g. if the display will be fetching data directly from the layer and
* the layer can not be modified until after the next set().
*/
HWC_HINT_TRIPLE_BUFFER = 0x00000001,
/*
* HWC sets HWC_HINT_CLEAR_FB to tell SurfaceFlinger that it should clear the
* framebuffer with transparent pixels where this layer would be.
* SurfaceFlinger will only honor this flag when the layer has no blending
*
*/
HWC_HINT_CLEAR_FB = 0x00000002
};
/*
* hwc_layer_t::flags values
* Flags are set by SurfaceFlinger and read by the HAL
*/
enum {
/*
* HWC_SKIP_LAYER is set by SurfaceFlnger to indicate that the HAL
* shall not consider this layer for composition as it will be handled
* by SurfaceFlinger (just as if compositionType was set to HWC_OVERLAY).
*/
HWC_SKIP_LAYER = 0x00000001,
};
/*
* hwc_layer_t::compositionType values
*/
enum {
/* this layer is to be drawn into the framebuffer by SurfaceFlinger */
HWC_FRAMEBUFFER = 0,
/* this layer will be handled in the HWC */
HWC_OVERLAY = 1,
/* this is the background layer. it's used to set the background color.
* there is only a single background layer */
HWC_BACKGROUND = 2,
/* this layer holds the result of compositing the HWC_FRAMEBUFFER layers.
* Added in HWC_DEVICE_API_VERSION_1_1. */
HWC_FRAMEBUFFER_TARGET = 3,
/* this layer's contents are taken from a sideband buffer stream.
* Added in HWC_DEVICE_API_VERSION_1_4. */
HWC_SIDEBAND = 4,
};
/*
* hwc_layer_t::blending values
*/
enum {
/* no blending */
HWC_BLENDING_NONE = 0x0100,
/* ONE / ONE_MINUS_SRC_ALPHA */
HWC_BLENDING_PREMULT = 0x0105,
/* SRC_ALPHA / ONE_MINUS_SRC_ALPHA */
HWC_BLENDING_COVERAGE = 0x0405
};
/*
* hwc_layer_t::transform values
*/
enum {
/* flip source image horizontally */
HWC_TRANSFORM_FLIP_H = HAL_TRANSFORM_FLIP_H,
/* flip source image vertically */
HWC_TRANSFORM_FLIP_V = HAL_TRANSFORM_FLIP_V,
/* rotate source image 90 degrees clock-wise */
HWC_TRANSFORM_ROT_90 = HAL_TRANSFORM_ROT_90,
/* rotate source image 180 degrees */
HWC_TRANSFORM_ROT_180 = HAL_TRANSFORM_ROT_180,
/* rotate source image 270 degrees clock-wise */
HWC_TRANSFORM_ROT_270 = HAL_TRANSFORM_ROT_270,
};
/* attributes queriable with query() */
enum {
/*
* Must return 1 if the background layer is supported, 0 otherwise.
*/
HWC_BACKGROUND_LAYER_SUPPORTED = 0,
/*
* Returns the vsync period in nanoseconds.
*
* This query is not used for HWC_DEVICE_API_VERSION_1_1 and later.
* Instead, the per-display attribute HWC_DISPLAY_VSYNC_PERIOD is used.
*/
HWC_VSYNC_PERIOD = 1,
/*
* Availability: HWC_DEVICE_API_VERSION_1_1
* Returns a mask of supported display types.
*/
HWC_DISPLAY_TYPES_SUPPORTED = 2,
};
/* display attributes returned by getDisplayAttributes() */
enum {
/* Indicates the end of an attribute list */
HWC_DISPLAY_NO_ATTRIBUTE = 0,
/* The vsync period in nanoseconds */
HWC_DISPLAY_VSYNC_PERIOD = 1,
/* The number of pixels in the horizontal and vertical directions. */
HWC_DISPLAY_WIDTH = 2,
HWC_DISPLAY_HEIGHT = 3,
/* The number of pixels per thousand inches of this configuration.
*
* Scaling DPI by 1000 allows it to be stored in an int without losing
* too much precision.
*
* If the DPI for a configuration is unavailable or the HWC implementation
* considers it unreliable, it should set these attributes to zero.
*/
HWC_DISPLAY_DPI_X = 4,
HWC_DISPLAY_DPI_Y = 5,
};
/* Allowed events for hwc_methods::eventControl() */
enum {
HWC_EVENT_VSYNC = 0
};
/* Display types and associated mask bits. */
enum {
HWC_DISPLAY_PRIMARY = 0,
HWC_DISPLAY_EXTERNAL = 1, // HDMI, DP, etc.
HWC_DISPLAY_VIRTUAL = 2,
HWC_NUM_PHYSICAL_DISPLAY_TYPES = 2,
HWC_NUM_DISPLAY_TYPES = 3,
};
enum {
HWC_DISPLAY_PRIMARY_BIT = 1 << HWC_DISPLAY_PRIMARY,
HWC_DISPLAY_EXTERNAL_BIT = 1 << HWC_DISPLAY_EXTERNAL,
HWC_DISPLAY_VIRTUAL_BIT = 1 << HWC_DISPLAY_VIRTUAL,
};
/* Display power modes */
enum {
HWC_POWER_MODE_OFF = 0,
HWC_POWER_MODE_DOZE = 1,
HWC_POWER_MODE_NORMAL = 2,
};
/*****************************************************************************/
__END_DECLS
#endif /* ANDROID_INCLUDE_HARDWARE_HWCOMPOSER_DEFS_H */