b1ea403d92
- getSupportedDisplayVsyncPeriods was removed as the vsync period can be obtained by getDisplayAttribute for each individual config. - renamed setActiveConfigAndVsyncPeriod -> setActiveConfigWithConstraints to better describe what this function does. - added VsyncPeriodChangeTimeline and onVsyncPeriodTimingChanged Test: rev up composer to 2.4 and test refresh rate switching Bug: 141329414 Change-Id: Ifec51c893bb9038e9ac48d02c1c7b0fe9e25c108
2909 lines
123 KiB
C++
2909 lines
123 KiB
C++
/*
|
|
* Copyright 2015 The Android Open Source Project
|
|
*
|
|
* Licensed under the Apache License, Version 2.0 (the "License");
|
|
* you may not use this file except in compliance with the License.
|
|
* You may obtain a copy of the License at
|
|
*
|
|
* http://www.apache.org/licenses/LICENSE-2.0
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS,
|
|
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
* See the License for the specific language governing permissions and
|
|
* limitations under the License.
|
|
*/
|
|
|
|
#ifndef ANDROID_HARDWARE_HWCOMPOSER2_H
|
|
#define ANDROID_HARDWARE_HWCOMPOSER2_H
|
|
|
|
#include <sys/cdefs.h>
|
|
|
|
#include <hardware/hardware.h>
|
|
|
|
#include "hwcomposer_defs.h"
|
|
|
|
__BEGIN_DECLS
|
|
|
|
/*
|
|
* Enums
|
|
*
|
|
* For most of these enums, there is an invalid value defined to be 0. This is
|
|
* an attempt to catch uninitialized fields, and these values should not be
|
|
* used.
|
|
*/
|
|
|
|
/* Display attributes queryable through getDisplayAttribute */
|
|
typedef enum {
|
|
HWC2_ATTRIBUTE_INVALID = 0,
|
|
|
|
/* Dimensions in pixels */
|
|
HWC2_ATTRIBUTE_WIDTH = 1,
|
|
HWC2_ATTRIBUTE_HEIGHT = 2,
|
|
|
|
/* Vsync period in nanoseconds */
|
|
HWC2_ATTRIBUTE_VSYNC_PERIOD = 3,
|
|
|
|
/* Dots per thousand inches (DPI * 1000). Scaling by 1000 allows these
|
|
* numbers to be stored in an int32_t without losing too much precision. If
|
|
* the DPI for a configuration is unavailable or is considered unreliable,
|
|
* the device may return -1 instead */
|
|
HWC2_ATTRIBUTE_DPI_X = 4,
|
|
HWC2_ATTRIBUTE_DPI_Y = 5,
|
|
|
|
/* The configuration group this config is associated to.
|
|
* Switching between configurations within the same group may be done seamlessly
|
|
* in some conditions via setActiveConfigWithConstraints. */
|
|
HWC2_ATTRIBUTE_CONFIG_GROUP = 7,
|
|
} hwc2_attribute_t;
|
|
|
|
/* Blend modes, settable per layer */
|
|
typedef enum {
|
|
HWC2_BLEND_MODE_INVALID = 0,
|
|
|
|
/* colorOut = colorSrc */
|
|
HWC2_BLEND_MODE_NONE = 1,
|
|
|
|
/* colorOut = colorSrc + colorDst * (1 - alphaSrc) */
|
|
HWC2_BLEND_MODE_PREMULTIPLIED = 2,
|
|
|
|
/* colorOut = colorSrc * alphaSrc + colorDst * (1 - alphaSrc) */
|
|
HWC2_BLEND_MODE_COVERAGE = 3,
|
|
} hwc2_blend_mode_t;
|
|
|
|
/* See the 'Callbacks' section for more detailed descriptions of what these
|
|
* functions do */
|
|
typedef enum {
|
|
HWC2_CALLBACK_INVALID = 0,
|
|
HWC2_CALLBACK_HOTPLUG = 1,
|
|
HWC2_CALLBACK_REFRESH = 2,
|
|
HWC2_CALLBACK_VSYNC = 3,
|
|
HWC2_CALLBACK_VSYNC_2_4 = 4,
|
|
HWC2_CALLBACK_VSYNC_PERIOD_TIMING_CHANGED = 5,
|
|
} hwc2_callback_descriptor_t;
|
|
|
|
/* Optional capabilities which may be supported by some devices. The particular
|
|
* set of supported capabilities for a given device may be retrieved using
|
|
* getCapabilities. */
|
|
typedef enum {
|
|
HWC2_CAPABILITY_INVALID = 0,
|
|
|
|
/* Specifies that the device supports sideband stream layers, for which
|
|
* buffer content updates and other synchronization will not be provided
|
|
* through the usual validate/present cycle and must be handled by an
|
|
* external implementation-defined mechanism. Only changes to layer state
|
|
* (such as position, size, etc.) need to be performed through the
|
|
* validate/present cycle. */
|
|
HWC2_CAPABILITY_SIDEBAND_STREAM = 1,
|
|
|
|
/* Specifies that the device will apply a color transform even when either
|
|
* the client or the device has chosen that all layers should be composed by
|
|
* the client. This will prevent the client from applying the color
|
|
* transform during its composition step. */
|
|
HWC2_CAPABILITY_SKIP_CLIENT_COLOR_TRANSFORM = 2,
|
|
|
|
/* Specifies that the present fence must not be used as an accurate
|
|
* representation of the actual present time of a frame.
|
|
* This capability must never be set by HWC2 devices.
|
|
* This capability may be set for HWC1 devices that use the
|
|
* HWC2On1Adapter where emulation of the present fence using the retire
|
|
* fence is not feasible.
|
|
* In the future, CTS tests will require present time to be reliable.
|
|
*/
|
|
HWC2_CAPABILITY_PRESENT_FENCE_IS_NOT_RELIABLE = 3,
|
|
|
|
/* Specifies that a device is able to skip the validateDisplay call before
|
|
* receiving a call to presentDisplay. The client will always skip
|
|
* validateDisplay and try to call presentDisplay regardless of the changes
|
|
* in the properties of the layers. If the device returns anything else than
|
|
* HWC2_ERROR_NONE, it will call validateDisplay then presentDisplay again.
|
|
* For this capability to be worthwhile the device implementation of
|
|
* presentDisplay should fail as fast as possible in the case a
|
|
* validateDisplay step is needed.
|
|
*/
|
|
HWC2_CAPABILITY_SKIP_VALIDATE = 4,
|
|
} hwc2_capability_t;
|
|
|
|
/* Possible composition types for a given layer */
|
|
typedef enum {
|
|
HWC2_COMPOSITION_INVALID = 0,
|
|
|
|
/* The client will composite this layer into the client target buffer
|
|
* (provided to the device through setClientTarget).
|
|
*
|
|
* The device must not request any composition type changes for layers of
|
|
* this type. */
|
|
HWC2_COMPOSITION_CLIENT = 1,
|
|
|
|
/* The device will handle the composition of this layer through a hardware
|
|
* overlay or other similar means.
|
|
*
|
|
* Upon validateDisplay, the device may request a change from this type to
|
|
* HWC2_COMPOSITION_CLIENT. */
|
|
HWC2_COMPOSITION_DEVICE = 2,
|
|
|
|
/* The device will render this layer using the color set through
|
|
* setLayerColor. If this functionality is not supported on a layer that the
|
|
* client sets to HWC2_COMPOSITION_SOLID_COLOR, the device must request that
|
|
* the composition type of that layer is changed to HWC2_COMPOSITION_CLIENT
|
|
* upon the next call to validateDisplay.
|
|
*
|
|
* Upon validateDisplay, the device may request a change from this type to
|
|
* HWC2_COMPOSITION_CLIENT. */
|
|
HWC2_COMPOSITION_SOLID_COLOR = 3,
|
|
|
|
/* Similar to DEVICE, but the position of this layer may also be set
|
|
* asynchronously through setCursorPosition. If this functionality is not
|
|
* supported on a layer that the client sets to HWC2_COMPOSITION_CURSOR, the
|
|
* device must request that the composition type of that layer is changed to
|
|
* HWC2_COMPOSITION_CLIENT upon the next call to validateDisplay.
|
|
*
|
|
* Upon validateDisplay, the device may request a change from this type to
|
|
* either HWC2_COMPOSITION_DEVICE or HWC2_COMPOSITION_CLIENT. Changing to
|
|
* HWC2_COMPOSITION_DEVICE will prevent the use of setCursorPosition but
|
|
* still permit the device to composite the layer. */
|
|
HWC2_COMPOSITION_CURSOR = 4,
|
|
|
|
/* The device will handle the composition of this layer, as well as its
|
|
* buffer updates and content synchronization. Only supported on devices
|
|
* which provide HWC2_CAPABILITY_SIDEBAND_STREAM.
|
|
*
|
|
* Upon validateDisplay, the device may request a change from this type to
|
|
* either HWC2_COMPOSITION_DEVICE or HWC2_COMPOSITION_CLIENT, but it is
|
|
* unlikely that content will display correctly in these cases. */
|
|
HWC2_COMPOSITION_SIDEBAND = 5,
|
|
} hwc2_composition_t;
|
|
|
|
/* Possible connection options from the hotplug callback */
|
|
typedef enum {
|
|
HWC2_CONNECTION_INVALID = 0,
|
|
|
|
/* The display has been connected */
|
|
HWC2_CONNECTION_CONNECTED = 1,
|
|
|
|
/* The display has been disconnected */
|
|
HWC2_CONNECTION_DISCONNECTED = 2,
|
|
} hwc2_connection_t;
|
|
|
|
/* Display requests returned by getDisplayRequests */
|
|
typedef enum {
|
|
/* Instructs the client to provide a new client target buffer, even if no
|
|
* layers are marked for client composition. */
|
|
HWC2_DISPLAY_REQUEST_FLIP_CLIENT_TARGET = 1 << 0,
|
|
|
|
/* Instructs the client to write the result of client composition directly
|
|
* into the virtual display output buffer. If any of the layers are not
|
|
* marked as HWC2_COMPOSITION_CLIENT or the given display is not a virtual
|
|
* display, this request has no effect. */
|
|
HWC2_DISPLAY_REQUEST_WRITE_CLIENT_TARGET_TO_OUTPUT = 1 << 1,
|
|
} hwc2_display_request_t;
|
|
|
|
/* Display types returned by getDisplayType */
|
|
typedef enum {
|
|
HWC2_DISPLAY_TYPE_INVALID = 0,
|
|
|
|
/* All physical displays, including both internal displays and hotpluggable
|
|
* external displays */
|
|
HWC2_DISPLAY_TYPE_PHYSICAL = 1,
|
|
|
|
/* Virtual displays created by createVirtualDisplay */
|
|
HWC2_DISPLAY_TYPE_VIRTUAL = 2,
|
|
} hwc2_display_type_t;
|
|
|
|
/* Physical display types returned by getDisplayConnectionType */
|
|
typedef enum {
|
|
HWC2_DISPLAY_CONNECTION_TYPE_INTERNAL = 0,
|
|
HWC2_DISPLAY_CONNECTION_TYPE_EXTERNAL = 1,
|
|
} hwc2_display_connection_type_t;
|
|
|
|
/* Return codes from all functions */
|
|
typedef enum {
|
|
HWC2_ERROR_NONE = 0,
|
|
HWC2_ERROR_BAD_CONFIG,
|
|
HWC2_ERROR_BAD_DISPLAY,
|
|
HWC2_ERROR_BAD_LAYER,
|
|
HWC2_ERROR_BAD_PARAMETER,
|
|
HWC2_ERROR_HAS_CHANGES,
|
|
HWC2_ERROR_NO_RESOURCES,
|
|
HWC2_ERROR_NOT_VALIDATED,
|
|
HWC2_ERROR_UNSUPPORTED,
|
|
HWC2_ERROR_SEAMLESS_NOT_ALLOWED,
|
|
HWC2_ERROR_SEAMLESS_NOT_POSSIBLE,
|
|
} hwc2_error_t;
|
|
|
|
/* Function descriptors for use with getFunction */
|
|
typedef enum {
|
|
HWC2_FUNCTION_INVALID = 0,
|
|
HWC2_FUNCTION_ACCEPT_DISPLAY_CHANGES,
|
|
HWC2_FUNCTION_CREATE_LAYER,
|
|
HWC2_FUNCTION_CREATE_VIRTUAL_DISPLAY,
|
|
HWC2_FUNCTION_DESTROY_LAYER,
|
|
HWC2_FUNCTION_DESTROY_VIRTUAL_DISPLAY,
|
|
HWC2_FUNCTION_DUMP,
|
|
HWC2_FUNCTION_GET_ACTIVE_CONFIG,
|
|
HWC2_FUNCTION_GET_CHANGED_COMPOSITION_TYPES,
|
|
HWC2_FUNCTION_GET_CLIENT_TARGET_SUPPORT,
|
|
HWC2_FUNCTION_GET_COLOR_MODES,
|
|
HWC2_FUNCTION_GET_DISPLAY_ATTRIBUTE,
|
|
HWC2_FUNCTION_GET_DISPLAY_CONFIGS,
|
|
HWC2_FUNCTION_GET_DISPLAY_NAME,
|
|
HWC2_FUNCTION_GET_DISPLAY_REQUESTS,
|
|
HWC2_FUNCTION_GET_DISPLAY_TYPE,
|
|
HWC2_FUNCTION_GET_DOZE_SUPPORT,
|
|
HWC2_FUNCTION_GET_HDR_CAPABILITIES,
|
|
HWC2_FUNCTION_GET_MAX_VIRTUAL_DISPLAY_COUNT,
|
|
HWC2_FUNCTION_GET_RELEASE_FENCES,
|
|
HWC2_FUNCTION_PRESENT_DISPLAY,
|
|
HWC2_FUNCTION_REGISTER_CALLBACK,
|
|
HWC2_FUNCTION_SET_ACTIVE_CONFIG,
|
|
HWC2_FUNCTION_SET_CLIENT_TARGET,
|
|
HWC2_FUNCTION_SET_COLOR_MODE,
|
|
HWC2_FUNCTION_SET_COLOR_TRANSFORM,
|
|
HWC2_FUNCTION_SET_CURSOR_POSITION,
|
|
HWC2_FUNCTION_SET_LAYER_BLEND_MODE,
|
|
HWC2_FUNCTION_SET_LAYER_BUFFER,
|
|
HWC2_FUNCTION_SET_LAYER_COLOR,
|
|
HWC2_FUNCTION_SET_LAYER_COMPOSITION_TYPE,
|
|
HWC2_FUNCTION_SET_LAYER_DATASPACE,
|
|
HWC2_FUNCTION_SET_LAYER_DISPLAY_FRAME,
|
|
HWC2_FUNCTION_SET_LAYER_PLANE_ALPHA,
|
|
HWC2_FUNCTION_SET_LAYER_SIDEBAND_STREAM,
|
|
HWC2_FUNCTION_SET_LAYER_SOURCE_CROP,
|
|
HWC2_FUNCTION_SET_LAYER_SURFACE_DAMAGE,
|
|
HWC2_FUNCTION_SET_LAYER_TRANSFORM,
|
|
HWC2_FUNCTION_SET_LAYER_VISIBLE_REGION,
|
|
HWC2_FUNCTION_SET_LAYER_Z_ORDER,
|
|
HWC2_FUNCTION_SET_OUTPUT_BUFFER,
|
|
HWC2_FUNCTION_SET_POWER_MODE,
|
|
HWC2_FUNCTION_SET_VSYNC_ENABLED,
|
|
HWC2_FUNCTION_VALIDATE_DISPLAY,
|
|
HWC2_FUNCTION_SET_LAYER_FLOAT_COLOR,
|
|
HWC2_FUNCTION_SET_LAYER_PER_FRAME_METADATA,
|
|
HWC2_FUNCTION_GET_PER_FRAME_METADATA_KEYS,
|
|
HWC2_FUNCTION_SET_READBACK_BUFFER,
|
|
HWC2_FUNCTION_GET_READBACK_BUFFER_ATTRIBUTES,
|
|
HWC2_FUNCTION_GET_READBACK_BUFFER_FENCE,
|
|
HWC2_FUNCTION_GET_RENDER_INTENTS,
|
|
HWC2_FUNCTION_SET_COLOR_MODE_WITH_RENDER_INTENT,
|
|
HWC2_FUNCTION_GET_DATASPACE_SATURATION_MATRIX,
|
|
|
|
// composer 2.3
|
|
HWC2_FUNCTION_GET_DISPLAY_IDENTIFICATION_DATA,
|
|
HWC2_FUNCTION_GET_DISPLAY_CAPABILITIES,
|
|
HWC2_FUNCTION_SET_LAYER_COLOR_TRANSFORM,
|
|
HWC2_FUNCTION_GET_DISPLAYED_CONTENT_SAMPLING_ATTRIBUTES,
|
|
HWC2_FUNCTION_SET_DISPLAYED_CONTENT_SAMPLING_ENABLED,
|
|
HWC2_FUNCTION_GET_DISPLAYED_CONTENT_SAMPLE,
|
|
HWC2_FUNCTION_SET_LAYER_PER_FRAME_METADATA_BLOBS,
|
|
HWC2_FUNCTION_GET_DISPLAY_BRIGHTNESS_SUPPORT,
|
|
HWC2_FUNCTION_SET_DISPLAY_BRIGHTNESS,
|
|
|
|
// composer 2.4
|
|
HWC2_FUNCTION_GET_DISPLAY_CONNECTION_TYPE,
|
|
HWC2_FUNCTION_GET_DISPLAY_VSYNC_PERIOD,
|
|
HWC2_FUNCTION_SET_ACTIVE_CONFIG_WITH_CONSTRAINTS,
|
|
} hwc2_function_descriptor_t;
|
|
|
|
/* Layer requests returned from getDisplayRequests */
|
|
typedef enum {
|
|
/* The client should clear its target with transparent pixels where this
|
|
* layer would be. The client may ignore this request if the layer must be
|
|
* blended. */
|
|
HWC2_LAYER_REQUEST_CLEAR_CLIENT_TARGET = 1 << 0,
|
|
} hwc2_layer_request_t;
|
|
|
|
/* Power modes for use with setPowerMode */
|
|
typedef enum {
|
|
/* The display is fully off (blanked) */
|
|
HWC2_POWER_MODE_OFF = 0,
|
|
|
|
/* These are optional low power modes. getDozeSupport may be called to
|
|
* determine whether a given display supports these modes. */
|
|
|
|
/* The display is turned on and configured in a low power state that is
|
|
* suitable for presenting ambient information to the user, possibly with
|
|
* lower fidelity than HWC2_POWER_MODE_ON, but with greater efficiency. */
|
|
HWC2_POWER_MODE_DOZE = 1,
|
|
|
|
/* The display is configured as in HWC2_POWER_MODE_DOZE but may stop
|
|
* applying display updates from the client. This is effectively a hint to
|
|
* the device that drawing to the display has been suspended and that the
|
|
* the device should remain on in a low power state and continue displaying
|
|
* its current contents indefinitely until the power mode changes.
|
|
*
|
|
* This mode may also be used as a signal to enable hardware-based doze
|
|
* functionality. In this case, the device is free to take over the display
|
|
* and manage it autonomously to implement a low power always-on display. */
|
|
HWC2_POWER_MODE_DOZE_SUSPEND = 3,
|
|
|
|
/* The display is fully on */
|
|
HWC2_POWER_MODE_ON = 2,
|
|
} hwc2_power_mode_t;
|
|
|
|
/* Vsync values passed to setVsyncEnabled */
|
|
typedef enum {
|
|
HWC2_VSYNC_INVALID = 0,
|
|
|
|
/* Enable vsync */
|
|
HWC2_VSYNC_ENABLE = 1,
|
|
|
|
/* Disable vsync */
|
|
HWC2_VSYNC_DISABLE = 2,
|
|
} hwc2_vsync_t;
|
|
|
|
/* MUST match HIDL's V2_2::IComposerClient::PerFrameMetadataKey */
|
|
typedef enum {
|
|
/* SMPTE ST 2084:2014.
|
|
* Coordinates defined in CIE 1931 xy chromaticity space
|
|
*/
|
|
HWC2_DISPLAY_RED_PRIMARY_X = 0,
|
|
HWC2_DISPLAY_RED_PRIMARY_Y = 1,
|
|
HWC2_DISPLAY_GREEN_PRIMARY_X = 2,
|
|
HWC2_DISPLAY_GREEN_PRIMARY_Y = 3,
|
|
HWC2_DISPLAY_BLUE_PRIMARY_X = 4,
|
|
HWC2_DISPLAY_BLUE_PRIMARY_Y = 5,
|
|
HWC2_WHITE_POINT_X = 6,
|
|
HWC2_WHITE_POINT_Y = 7,
|
|
/* SMPTE ST 2084:2014.
|
|
* Units: nits
|
|
* max as defined by ST 2048: 10,000 nits
|
|
*/
|
|
HWC2_MAX_LUMINANCE = 8,
|
|
HWC2_MIN_LUMINANCE = 9,
|
|
|
|
/* CTA 861.3
|
|
* Units: nits
|
|
*/
|
|
HWC2_MAX_CONTENT_LIGHT_LEVEL = 10,
|
|
HWC2_MAX_FRAME_AVERAGE_LIGHT_LEVEL = 11,
|
|
} hwc2_per_frame_metadata_key_t;
|
|
|
|
/* SetDisplayedContentSampling values passed to setDisplayedContentSamplingEnabled */
|
|
typedef enum {
|
|
HWC2_DISPLAYED_CONTENT_SAMPLING_INVALID = 0,
|
|
|
|
/* Enable displayed content sampling */
|
|
HWC2_DISPLAYED_CONTENT_SAMPLING_ENABLE = 1,
|
|
|
|
/* Disable displayed content sampling */
|
|
HWC2_DISPLAYED_CONTENT_SAMPLING_DISABLE = 2,
|
|
} hwc2_displayed_content_sampling_t;
|
|
|
|
typedef enum {
|
|
HWC2_FORMAT_COMPONENT_0 = 1 << 0, /* The first component (eg, for RGBA_8888, this is R) */
|
|
HWC2_FORMAT_COMPONENT_1 = 1 << 1, /* The second component (eg, for RGBA_8888, this is G) */
|
|
HWC2_FORMAT_COMPONENT_2 = 1 << 2, /* The third component (eg, for RGBA_8888, this is B) */
|
|
HWC2_FORMAT_COMPONENT_3 = 1 << 3, /* The fourth component (eg, for RGBA_8888, this is A) */
|
|
} hwc2_format_color_component_t;
|
|
|
|
/* Optional display capabilities which may be supported by some displays.
|
|
* The particular set of supported capabilities for a given display may be
|
|
* retrieved using getDisplayCapabilities. */
|
|
typedef enum {
|
|
HWC2_DISPLAY_CAPABILITY_INVALID = 0,
|
|
|
|
/**
|
|
* Specifies that the display must apply a color transform even when either
|
|
* the client or the device has chosen that all layers should be composed by
|
|
* the client. This prevents the client from applying the color transform
|
|
* during its composition step.
|
|
* If getDisplayCapabilities is supported, the global capability
|
|
* HWC2_CAPABILITY_SKIP_CLIENT_COLOR_TRANSFORM is ignored.
|
|
* If getDisplayCapabilities is not supported, and the global capability
|
|
* HWC2_CAPABILITY_SKIP_CLIENT_COLOR_TRANSFORM is returned by getCapabilities,
|
|
* then all displays must be treated as having
|
|
* HWC2_DISPLAY_CAPABILITY_SKIP_CLIENT_COLOR_TRANSFORM.
|
|
*/
|
|
HWC2_DISPLAY_CAPABILITY_SKIP_CLIENT_COLOR_TRANSFORM = 1,
|
|
|
|
/**
|
|
* Specifies that the display supports PowerMode::DOZE and
|
|
* PowerMode::DOZE_SUSPEND. DOZE_SUSPEND may not provide any benefit
|
|
* over DOZE (see the definition of PowerMode for more information),
|
|
* but if both DOZE and DOZE_SUSPEND are no different from
|
|
* PowerMode::ON, the device must not claim support.
|
|
* HWC2_DISPLAY_CAPABILITY_DOZE must be returned by getDisplayCapabilities
|
|
* when getDozeSupport indicates the display supports PowerMode::DOZE and
|
|
* PowerMode::DOZE_SUSPEND.
|
|
*/
|
|
HWC2_DISPLAY_CAPABILITY_DOZE = 2,
|
|
|
|
/**
|
|
* Specified that the display supports brightness operations.
|
|
*/
|
|
HWC2_DISPLAY_CAPABILITY_BRIGHTNESS = 3,
|
|
} hwc2_display_capability_t;
|
|
|
|
/*
|
|
* Stringification Functions
|
|
*/
|
|
|
|
#ifdef HWC2_INCLUDE_STRINGIFICATION
|
|
|
|
static inline const char* getAttributeName(hwc2_attribute_t attribute) {
|
|
switch (attribute) {
|
|
case HWC2_ATTRIBUTE_INVALID: return "Invalid";
|
|
case HWC2_ATTRIBUTE_WIDTH: return "Width";
|
|
case HWC2_ATTRIBUTE_HEIGHT: return "Height";
|
|
case HWC2_ATTRIBUTE_VSYNC_PERIOD: return "VsyncPeriod";
|
|
case HWC2_ATTRIBUTE_DPI_X: return "DpiX";
|
|
case HWC2_ATTRIBUTE_DPI_Y: return "DpiY";
|
|
case HWC2_ATTRIBUTE_CONFIG_GROUP: return "ConfigGroup";
|
|
default: return "Unknown";
|
|
}
|
|
}
|
|
|
|
static inline const char* getBlendModeName(hwc2_blend_mode_t mode) {
|
|
switch (mode) {
|
|
case HWC2_BLEND_MODE_INVALID: return "Invalid";
|
|
case HWC2_BLEND_MODE_NONE: return "None";
|
|
case HWC2_BLEND_MODE_PREMULTIPLIED: return "Premultiplied";
|
|
case HWC2_BLEND_MODE_COVERAGE: return "Coverage";
|
|
default: return "Unknown";
|
|
}
|
|
}
|
|
|
|
static inline const char* getCallbackDescriptorName(
|
|
hwc2_callback_descriptor_t desc) {
|
|
switch (desc) {
|
|
case HWC2_CALLBACK_INVALID: return "Invalid";
|
|
case HWC2_CALLBACK_HOTPLUG: return "Hotplug";
|
|
case HWC2_CALLBACK_REFRESH: return "Refresh";
|
|
case HWC2_CALLBACK_VSYNC: return "Vsync";
|
|
case HWC2_CALLBACK_VSYNC_2_4: return "Vsync2.4";
|
|
case HWC2_CALLBACK_VSYNC_PERIOD_TIMING_CHANGED: return "VsyncPeriodTimingChanged";
|
|
default: return "Unknown";
|
|
}
|
|
}
|
|
|
|
static inline const char* getCapabilityName(hwc2_capability_t capability) {
|
|
switch (capability) {
|
|
case HWC2_CAPABILITY_INVALID: return "Invalid";
|
|
case HWC2_CAPABILITY_SIDEBAND_STREAM: return "SidebandStream";
|
|
case HWC2_CAPABILITY_SKIP_CLIENT_COLOR_TRANSFORM:
|
|
return "SkipClientColorTransform";
|
|
case HWC2_CAPABILITY_PRESENT_FENCE_IS_NOT_RELIABLE:
|
|
return "PresentFenceIsNotReliable";
|
|
default: return "Unknown";
|
|
}
|
|
}
|
|
|
|
static inline const char* getCompositionName(hwc2_composition_t composition) {
|
|
switch (composition) {
|
|
case HWC2_COMPOSITION_INVALID: return "Invalid";
|
|
case HWC2_COMPOSITION_CLIENT: return "Client";
|
|
case HWC2_COMPOSITION_DEVICE: return "Device";
|
|
case HWC2_COMPOSITION_SOLID_COLOR: return "SolidColor";
|
|
case HWC2_COMPOSITION_CURSOR: return "Cursor";
|
|
case HWC2_COMPOSITION_SIDEBAND: return "Sideband";
|
|
default: return "Unknown";
|
|
}
|
|
}
|
|
|
|
static inline const char* getConnectionName(hwc2_connection_t connection) {
|
|
switch (connection) {
|
|
case HWC2_CONNECTION_INVALID: return "Invalid";
|
|
case HWC2_CONNECTION_CONNECTED: return "Connected";
|
|
case HWC2_CONNECTION_DISCONNECTED: return "Disconnected";
|
|
default: return "Unknown";
|
|
}
|
|
}
|
|
|
|
static inline const char* getDisplayRequestName(
|
|
hwc2_display_request_t request) {
|
|
switch (__BIONIC_CAST(static_cast, int, request)) {
|
|
case 0: return "None";
|
|
case HWC2_DISPLAY_REQUEST_FLIP_CLIENT_TARGET: return "FlipClientTarget";
|
|
case HWC2_DISPLAY_REQUEST_WRITE_CLIENT_TARGET_TO_OUTPUT:
|
|
return "WriteClientTargetToOutput";
|
|
case HWC2_DISPLAY_REQUEST_FLIP_CLIENT_TARGET |
|
|
HWC2_DISPLAY_REQUEST_WRITE_CLIENT_TARGET_TO_OUTPUT:
|
|
return "FlipClientTarget|WriteClientTargetToOutput";
|
|
default: return "Unknown";
|
|
}
|
|
}
|
|
|
|
static inline const char* getDisplayTypeName(hwc2_display_type_t type) {
|
|
switch (type) {
|
|
case HWC2_DISPLAY_TYPE_INVALID: return "Invalid";
|
|
case HWC2_DISPLAY_TYPE_PHYSICAL: return "Physical";
|
|
case HWC2_DISPLAY_TYPE_VIRTUAL: return "Virtual";
|
|
default: return "Unknown";
|
|
}
|
|
}
|
|
|
|
static inline const char* getDisplayConnectionTypeName(hwc2_display_connection_type_t type) {
|
|
switch (type) {
|
|
case HWC2_DISPLAY_CONNECTION_TYPE_INTERNAL: return "Internal";
|
|
case HWC2_DISPLAY_CONNECTION_TYPE_EXTERNAL: return "External";
|
|
default: return "Unknown";
|
|
}
|
|
}
|
|
|
|
static inline const char* getErrorName(hwc2_error_t error) {
|
|
switch (error) {
|
|
case HWC2_ERROR_NONE: return "None";
|
|
case HWC2_ERROR_BAD_CONFIG: return "BadConfig";
|
|
case HWC2_ERROR_BAD_DISPLAY: return "BadDisplay";
|
|
case HWC2_ERROR_BAD_LAYER: return "BadLayer";
|
|
case HWC2_ERROR_BAD_PARAMETER: return "BadParameter";
|
|
case HWC2_ERROR_HAS_CHANGES: return "HasChanges";
|
|
case HWC2_ERROR_NO_RESOURCES: return "NoResources";
|
|
case HWC2_ERROR_NOT_VALIDATED: return "NotValidated";
|
|
case HWC2_ERROR_UNSUPPORTED: return "Unsupported";
|
|
case HWC2_ERROR_SEAMLESS_NOT_ALLOWED: return "SeamlessNotAllowed";
|
|
case HWC2_ERROR_SEAMLESS_NOT_POSSIBLE: return "SeamlessNotPossible";
|
|
default: return "Unknown";
|
|
}
|
|
}
|
|
|
|
static inline const char* getFunctionDescriptorName(
|
|
hwc2_function_descriptor_t desc) {
|
|
switch (desc) {
|
|
case HWC2_FUNCTION_INVALID: return "Invalid";
|
|
case HWC2_FUNCTION_ACCEPT_DISPLAY_CHANGES:
|
|
return "AcceptDisplayChanges";
|
|
case HWC2_FUNCTION_CREATE_LAYER: return "CreateLayer";
|
|
case HWC2_FUNCTION_CREATE_VIRTUAL_DISPLAY:
|
|
return "CreateVirtualDisplay";
|
|
case HWC2_FUNCTION_DESTROY_LAYER: return "DestroyLayer";
|
|
case HWC2_FUNCTION_DESTROY_VIRTUAL_DISPLAY:
|
|
return "DestroyVirtualDisplay";
|
|
case HWC2_FUNCTION_DUMP: return "Dump";
|
|
case HWC2_FUNCTION_GET_ACTIVE_CONFIG: return "GetActiveConfig";
|
|
case HWC2_FUNCTION_GET_CHANGED_COMPOSITION_TYPES:
|
|
return "GetChangedCompositionTypes";
|
|
case HWC2_FUNCTION_GET_CLIENT_TARGET_SUPPORT:
|
|
return "GetClientTargetSupport";
|
|
case HWC2_FUNCTION_GET_COLOR_MODES: return "GetColorModes";
|
|
case HWC2_FUNCTION_GET_DISPLAY_ATTRIBUTE: return "GetDisplayAttribute";
|
|
case HWC2_FUNCTION_GET_DISPLAY_CONFIGS: return "GetDisplayConfigs";
|
|
case HWC2_FUNCTION_GET_DISPLAY_NAME: return "GetDisplayName";
|
|
case HWC2_FUNCTION_GET_DISPLAY_REQUESTS: return "GetDisplayRequests";
|
|
case HWC2_FUNCTION_GET_DISPLAY_TYPE: return "GetDisplayType";
|
|
case HWC2_FUNCTION_GET_DOZE_SUPPORT: return "GetDozeSupport";
|
|
case HWC2_FUNCTION_GET_HDR_CAPABILITIES: return "GetHdrCapabilities";
|
|
case HWC2_FUNCTION_GET_MAX_VIRTUAL_DISPLAY_COUNT:
|
|
return "GetMaxVirtualDisplayCount";
|
|
case HWC2_FUNCTION_GET_RELEASE_FENCES: return "GetReleaseFences";
|
|
case HWC2_FUNCTION_PRESENT_DISPLAY: return "PresentDisplay";
|
|
case HWC2_FUNCTION_REGISTER_CALLBACK: return "RegisterCallback";
|
|
case HWC2_FUNCTION_SET_ACTIVE_CONFIG: return "SetActiveConfig";
|
|
case HWC2_FUNCTION_SET_CLIENT_TARGET: return "SetClientTarget";
|
|
case HWC2_FUNCTION_SET_COLOR_MODE: return "SetColorMode";
|
|
case HWC2_FUNCTION_SET_COLOR_TRANSFORM: return "SetColorTransform";
|
|
case HWC2_FUNCTION_SET_CURSOR_POSITION: return "SetCursorPosition";
|
|
case HWC2_FUNCTION_SET_LAYER_BLEND_MODE: return "SetLayerBlendMode";
|
|
case HWC2_FUNCTION_SET_LAYER_BUFFER: return "SetLayerBuffer";
|
|
case HWC2_FUNCTION_SET_LAYER_COLOR: return "SetLayerColor";
|
|
case HWC2_FUNCTION_SET_LAYER_COMPOSITION_TYPE:
|
|
return "SetLayerCompositionType";
|
|
case HWC2_FUNCTION_SET_LAYER_DATASPACE: return "SetLayerDataspace";
|
|
case HWC2_FUNCTION_SET_LAYER_DISPLAY_FRAME:
|
|
return "SetLayerDisplayFrame";
|
|
case HWC2_FUNCTION_SET_LAYER_PLANE_ALPHA: return "SetLayerPlaneAlpha";
|
|
case HWC2_FUNCTION_SET_LAYER_SIDEBAND_STREAM:
|
|
return "SetLayerSidebandStream";
|
|
case HWC2_FUNCTION_SET_LAYER_SOURCE_CROP: return "SetLayerSourceCrop";
|
|
case HWC2_FUNCTION_SET_LAYER_SURFACE_DAMAGE:
|
|
return "SetLayerSurfaceDamage";
|
|
case HWC2_FUNCTION_SET_LAYER_TRANSFORM: return "SetLayerTransform";
|
|
case HWC2_FUNCTION_SET_LAYER_VISIBLE_REGION:
|
|
return "SetLayerVisibleRegion";
|
|
case HWC2_FUNCTION_SET_LAYER_Z_ORDER: return "SetLayerZOrder";
|
|
case HWC2_FUNCTION_SET_OUTPUT_BUFFER: return "SetOutputBuffer";
|
|
case HWC2_FUNCTION_SET_POWER_MODE: return "SetPowerMode";
|
|
case HWC2_FUNCTION_SET_VSYNC_ENABLED: return "SetVsyncEnabled";
|
|
case HWC2_FUNCTION_VALIDATE_DISPLAY: return "ValidateDisplay";
|
|
case HWC2_FUNCTION_SET_LAYER_FLOAT_COLOR: return "SetLayerFloatColor";
|
|
case HWC2_FUNCTION_SET_LAYER_PER_FRAME_METADATA: return "SetLayerPerFrameMetadata";
|
|
case HWC2_FUNCTION_GET_PER_FRAME_METADATA_KEYS: return "GetPerFrameMetadataKeys";
|
|
case HWC2_FUNCTION_SET_READBACK_BUFFER: return "SetReadbackBuffer";
|
|
case HWC2_FUNCTION_GET_READBACK_BUFFER_ATTRIBUTES: return "GetReadbackBufferAttributes";
|
|
case HWC2_FUNCTION_GET_READBACK_BUFFER_FENCE: return "GetReadbackBufferFence";
|
|
case HWC2_FUNCTION_GET_RENDER_INTENTS: return "GetRenderIntents";
|
|
case HWC2_FUNCTION_SET_COLOR_MODE_WITH_RENDER_INTENT: return "SetColorModeWithRenderIntent";
|
|
case HWC2_FUNCTION_GET_DATASPACE_SATURATION_MATRIX: return "GetDataspaceSaturationMatrix";
|
|
|
|
// composer 2.3
|
|
case HWC2_FUNCTION_GET_DISPLAY_IDENTIFICATION_DATA: return "GetDisplayIdentificationData";
|
|
case HWC2_FUNCTION_GET_DISPLAY_CAPABILITIES: return "GetDisplayCapabilities";
|
|
case HWC2_FUNCTION_SET_LAYER_COLOR_TRANSFORM: return "SetLayerColorTransform";
|
|
case HWC2_FUNCTION_GET_DISPLAYED_CONTENT_SAMPLING_ATTRIBUTES: return "GetDisplayedContentSamplingAttributes";
|
|
case HWC2_FUNCTION_SET_DISPLAYED_CONTENT_SAMPLING_ENABLED: return "SetDisplayedContentSamplingEnabled";
|
|
case HWC2_FUNCTION_GET_DISPLAYED_CONTENT_SAMPLE: return "GetDisplayedContentSample";
|
|
case HWC2_FUNCTION_SET_LAYER_PER_FRAME_METADATA_BLOBS: return "SetLayerPerFrameMetadataBlobs";
|
|
case HWC2_FUNCTION_GET_DISPLAY_BRIGHTNESS_SUPPORT: return "GetDisplayBrightnessSupport";
|
|
case HWC2_FUNCTION_SET_DISPLAY_BRIGHTNESS: return "SetDisplayBrightness";
|
|
|
|
// composer 2.4
|
|
case HWC2_FUNCTION_GET_DISPLAY_CONNECTION_TYPE: return "GetDisplayConnectionType";
|
|
case HWC2_FUNCTION_GET_DISPLAY_VSYNC_PERIOD: return "GetDisplayVsyncPeriod";
|
|
case HWC2_FUNCTION_SET_ACTIVE_CONFIG_WITH_CONSTRAINTS: return "SetActiveConfigWithConstraints";
|
|
|
|
default: return "Unknown";
|
|
}
|
|
}
|
|
|
|
static inline const char* getLayerRequestName(hwc2_layer_request_t request) {
|
|
switch (__BIONIC_CAST(static_cast, int, request)) {
|
|
case 0: return "None";
|
|
case HWC2_LAYER_REQUEST_CLEAR_CLIENT_TARGET: return "ClearClientTarget";
|
|
default: return "Unknown";
|
|
}
|
|
}
|
|
|
|
static inline const char* getPowerModeName(hwc2_power_mode_t mode) {
|
|
switch (mode) {
|
|
case HWC2_POWER_MODE_OFF: return "Off";
|
|
case HWC2_POWER_MODE_DOZE_SUSPEND: return "DozeSuspend";
|
|
case HWC2_POWER_MODE_DOZE: return "Doze";
|
|
case HWC2_POWER_MODE_ON: return "On";
|
|
default: return "Unknown";
|
|
}
|
|
}
|
|
|
|
static inline const char* getTransformName(hwc_transform_t transform) {
|
|
switch (__BIONIC_CAST(static_cast, int, transform)) {
|
|
case 0: return "None";
|
|
case HWC_TRANSFORM_FLIP_H: return "FlipH";
|
|
case HWC_TRANSFORM_FLIP_V: return "FlipV";
|
|
case HWC_TRANSFORM_ROT_90: return "Rotate90";
|
|
case HWC_TRANSFORM_ROT_180: return "Rotate180";
|
|
case HWC_TRANSFORM_ROT_270: return "Rotate270";
|
|
case HWC_TRANSFORM_FLIP_H_ROT_90: return "FlipHRotate90";
|
|
case HWC_TRANSFORM_FLIP_V_ROT_90: return "FlipVRotate90";
|
|
default: return "Unknown";
|
|
}
|
|
}
|
|
|
|
static inline const char* getVsyncName(hwc2_vsync_t vsync) {
|
|
switch (vsync) {
|
|
case HWC2_VSYNC_INVALID: return "Invalid";
|
|
case HWC2_VSYNC_ENABLE: return "Enable";
|
|
case HWC2_VSYNC_DISABLE: return "Disable";
|
|
default: return "Unknown";
|
|
}
|
|
}
|
|
|
|
static inline const char* getDisplayedContentSamplingName(
|
|
hwc2_displayed_content_sampling_t sampling) {
|
|
switch (sampling) {
|
|
case HWC2_DISPLAYED_CONTENT_SAMPLING_INVALID: return "Invalid";
|
|
case HWC2_DISPLAYED_CONTENT_SAMPLING_ENABLE: return "Enable";
|
|
case HWC2_DISPLAYED_CONTENT_SAMPLING_DISABLE: return "Disable";
|
|
default: return "Unknown";
|
|
}
|
|
}
|
|
|
|
static inline const char* getFormatColorComponentName(hwc2_format_color_component_t component) {
|
|
switch (component) {
|
|
case HWC2_FORMAT_COMPONENT_0: return "FirstComponent";
|
|
case HWC2_FORMAT_COMPONENT_1: return "SecondComponent";
|
|
case HWC2_FORMAT_COMPONENT_2: return "ThirdComponent";
|
|
case HWC2_FORMAT_COMPONENT_3: return "FourthComponent";
|
|
default: return "Unknown";
|
|
}
|
|
}
|
|
|
|
static inline const char* getDisplayCapabilityName(hwc2_display_capability_t capability) {
|
|
switch (capability) {
|
|
case HWC2_DISPLAY_CAPABILITY_INVALID: return "Invalid";
|
|
case HWC2_DISPLAY_CAPABILITY_SKIP_CLIENT_COLOR_TRANSFORM:
|
|
return "SkipClientColorTransform";
|
|
case HWC2_DISPLAY_CAPABILITY_DOZE:
|
|
return "Doze";
|
|
case HWC2_DISPLAY_CAPABILITY_BRIGHTNESS:
|
|
return "Brightness";
|
|
default:
|
|
return "Unknown";
|
|
}
|
|
}
|
|
|
|
#define TO_STRING(E, T, printer) \
|
|
inline std::string to_string(E value) { return printer(value); } \
|
|
inline std::string to_string(T value) { return to_string(static_cast<E>(value)); }
|
|
#else // !HWC2_INCLUDE_STRINGIFICATION
|
|
#define TO_STRING(name, printer)
|
|
#endif // HWC2_INCLUDE_STRINGIFICATION
|
|
|
|
/*
|
|
* C++11 features
|
|
*/
|
|
|
|
#ifdef HWC2_USE_CPP11
|
|
__END_DECLS
|
|
|
|
#ifdef HWC2_INCLUDE_STRINGIFICATION
|
|
#include <string>
|
|
#endif
|
|
|
|
namespace HWC2 {
|
|
|
|
enum class Attribute : int32_t {
|
|
Invalid = HWC2_ATTRIBUTE_INVALID,
|
|
Width = HWC2_ATTRIBUTE_WIDTH,
|
|
Height = HWC2_ATTRIBUTE_HEIGHT,
|
|
VsyncPeriod = HWC2_ATTRIBUTE_VSYNC_PERIOD,
|
|
DpiX = HWC2_ATTRIBUTE_DPI_X,
|
|
DpiY = HWC2_ATTRIBUTE_DPI_Y,
|
|
ConfigGroup = HWC2_ATTRIBUTE_CONFIG_GROUP,
|
|
};
|
|
TO_STRING(hwc2_attribute_t, Attribute, getAttributeName)
|
|
|
|
enum class BlendMode : int32_t {
|
|
Invalid = HWC2_BLEND_MODE_INVALID,
|
|
None = HWC2_BLEND_MODE_NONE,
|
|
Premultiplied = HWC2_BLEND_MODE_PREMULTIPLIED,
|
|
Coverage = HWC2_BLEND_MODE_COVERAGE,
|
|
};
|
|
TO_STRING(hwc2_blend_mode_t, BlendMode, getBlendModeName)
|
|
|
|
enum class Callback : int32_t {
|
|
Invalid = HWC2_CALLBACK_INVALID,
|
|
Hotplug = HWC2_CALLBACK_HOTPLUG,
|
|
Refresh = HWC2_CALLBACK_REFRESH,
|
|
Vsync = HWC2_CALLBACK_VSYNC,
|
|
Vsync_2_4 = HWC2_CALLBACK_VSYNC_2_4,
|
|
VsyncPeriodTimingChanged = HWC2_CALLBACK_VSYNC_PERIOD_TIMING_CHANGED,
|
|
};
|
|
TO_STRING(hwc2_callback_descriptor_t, Callback, getCallbackDescriptorName)
|
|
|
|
enum class Capability : int32_t {
|
|
Invalid = HWC2_CAPABILITY_INVALID,
|
|
SidebandStream = HWC2_CAPABILITY_SIDEBAND_STREAM,
|
|
SkipClientColorTransform = HWC2_CAPABILITY_SKIP_CLIENT_COLOR_TRANSFORM,
|
|
PresentFenceIsNotReliable = HWC2_CAPABILITY_PRESENT_FENCE_IS_NOT_RELIABLE,
|
|
SkipValidate = HWC2_CAPABILITY_SKIP_VALIDATE,
|
|
};
|
|
TO_STRING(hwc2_capability_t, Capability, getCapabilityName)
|
|
|
|
enum class Composition : int32_t {
|
|
Invalid = HWC2_COMPOSITION_INVALID,
|
|
Client = HWC2_COMPOSITION_CLIENT,
|
|
Device = HWC2_COMPOSITION_DEVICE,
|
|
SolidColor = HWC2_COMPOSITION_SOLID_COLOR,
|
|
Cursor = HWC2_COMPOSITION_CURSOR,
|
|
Sideband = HWC2_COMPOSITION_SIDEBAND,
|
|
};
|
|
TO_STRING(hwc2_composition_t, Composition, getCompositionName)
|
|
|
|
enum class Connection : int32_t {
|
|
Invalid = HWC2_CONNECTION_INVALID,
|
|
Connected = HWC2_CONNECTION_CONNECTED,
|
|
Disconnected = HWC2_CONNECTION_DISCONNECTED,
|
|
};
|
|
TO_STRING(hwc2_connection_t, Connection, getConnectionName)
|
|
|
|
enum class DisplayRequest : int32_t {
|
|
FlipClientTarget = HWC2_DISPLAY_REQUEST_FLIP_CLIENT_TARGET,
|
|
WriteClientTargetToOutput =
|
|
HWC2_DISPLAY_REQUEST_WRITE_CLIENT_TARGET_TO_OUTPUT,
|
|
};
|
|
TO_STRING(hwc2_display_request_t, DisplayRequest, getDisplayRequestName)
|
|
|
|
enum class DisplayType : int32_t {
|
|
Invalid = HWC2_DISPLAY_TYPE_INVALID,
|
|
Physical = HWC2_DISPLAY_TYPE_PHYSICAL,
|
|
Virtual = HWC2_DISPLAY_TYPE_VIRTUAL,
|
|
};
|
|
TO_STRING(hwc2_display_type_t, DisplayType, getDisplayTypeName)
|
|
|
|
enum class DisplayConnectionType : uint32_t {
|
|
Internal = HWC2_DISPLAY_CONNECTION_TYPE_INTERNAL,
|
|
External = HWC2_DISPLAY_CONNECTION_TYPE_EXTERNAL,
|
|
};
|
|
TO_STRING(hwc2_display_connection_type_t, DisplayConnectionType, getDisplayConnectionTypeName)
|
|
|
|
enum class Error : int32_t {
|
|
None = HWC2_ERROR_NONE,
|
|
BadConfig = HWC2_ERROR_BAD_CONFIG,
|
|
BadDisplay = HWC2_ERROR_BAD_DISPLAY,
|
|
BadLayer = HWC2_ERROR_BAD_LAYER,
|
|
BadParameter = HWC2_ERROR_BAD_PARAMETER,
|
|
HasChanges = HWC2_ERROR_HAS_CHANGES,
|
|
NoResources = HWC2_ERROR_NO_RESOURCES,
|
|
NotValidated = HWC2_ERROR_NOT_VALIDATED,
|
|
Unsupported = HWC2_ERROR_UNSUPPORTED,
|
|
SeamlessNotAllowed = HWC2_ERROR_SEAMLESS_NOT_ALLOWED,
|
|
SeamlessNotPossible = HWC2_ERROR_SEAMLESS_NOT_POSSIBLE,
|
|
};
|
|
TO_STRING(hwc2_error_t, Error, getErrorName)
|
|
|
|
enum class FunctionDescriptor : int32_t {
|
|
Invalid = HWC2_FUNCTION_INVALID,
|
|
AcceptDisplayChanges = HWC2_FUNCTION_ACCEPT_DISPLAY_CHANGES,
|
|
CreateLayer = HWC2_FUNCTION_CREATE_LAYER,
|
|
CreateVirtualDisplay = HWC2_FUNCTION_CREATE_VIRTUAL_DISPLAY,
|
|
DestroyLayer = HWC2_FUNCTION_DESTROY_LAYER,
|
|
DestroyVirtualDisplay = HWC2_FUNCTION_DESTROY_VIRTUAL_DISPLAY,
|
|
Dump = HWC2_FUNCTION_DUMP,
|
|
GetActiveConfig = HWC2_FUNCTION_GET_ACTIVE_CONFIG,
|
|
GetChangedCompositionTypes = HWC2_FUNCTION_GET_CHANGED_COMPOSITION_TYPES,
|
|
GetClientTargetSupport = HWC2_FUNCTION_GET_CLIENT_TARGET_SUPPORT,
|
|
GetColorModes = HWC2_FUNCTION_GET_COLOR_MODES,
|
|
GetDisplayAttribute = HWC2_FUNCTION_GET_DISPLAY_ATTRIBUTE,
|
|
GetDisplayConfigs = HWC2_FUNCTION_GET_DISPLAY_CONFIGS,
|
|
GetDisplayName = HWC2_FUNCTION_GET_DISPLAY_NAME,
|
|
GetDisplayRequests = HWC2_FUNCTION_GET_DISPLAY_REQUESTS,
|
|
GetDisplayType = HWC2_FUNCTION_GET_DISPLAY_TYPE,
|
|
GetDozeSupport = HWC2_FUNCTION_GET_DOZE_SUPPORT,
|
|
GetHdrCapabilities = HWC2_FUNCTION_GET_HDR_CAPABILITIES,
|
|
GetMaxVirtualDisplayCount = HWC2_FUNCTION_GET_MAX_VIRTUAL_DISPLAY_COUNT,
|
|
GetReleaseFences = HWC2_FUNCTION_GET_RELEASE_FENCES,
|
|
PresentDisplay = HWC2_FUNCTION_PRESENT_DISPLAY,
|
|
RegisterCallback = HWC2_FUNCTION_REGISTER_CALLBACK,
|
|
SetActiveConfig = HWC2_FUNCTION_SET_ACTIVE_CONFIG,
|
|
SetClientTarget = HWC2_FUNCTION_SET_CLIENT_TARGET,
|
|
SetColorMode = HWC2_FUNCTION_SET_COLOR_MODE,
|
|
SetColorTransform = HWC2_FUNCTION_SET_COLOR_TRANSFORM,
|
|
SetCursorPosition = HWC2_FUNCTION_SET_CURSOR_POSITION,
|
|
SetLayerBlendMode = HWC2_FUNCTION_SET_LAYER_BLEND_MODE,
|
|
SetLayerBuffer = HWC2_FUNCTION_SET_LAYER_BUFFER,
|
|
SetLayerColor = HWC2_FUNCTION_SET_LAYER_COLOR,
|
|
SetLayerCompositionType = HWC2_FUNCTION_SET_LAYER_COMPOSITION_TYPE,
|
|
SetLayerDataspace = HWC2_FUNCTION_SET_LAYER_DATASPACE,
|
|
SetLayerDisplayFrame = HWC2_FUNCTION_SET_LAYER_DISPLAY_FRAME,
|
|
SetLayerPlaneAlpha = HWC2_FUNCTION_SET_LAYER_PLANE_ALPHA,
|
|
SetLayerSidebandStream = HWC2_FUNCTION_SET_LAYER_SIDEBAND_STREAM,
|
|
SetLayerSourceCrop = HWC2_FUNCTION_SET_LAYER_SOURCE_CROP,
|
|
SetLayerSurfaceDamage = HWC2_FUNCTION_SET_LAYER_SURFACE_DAMAGE,
|
|
SetLayerTransform = HWC2_FUNCTION_SET_LAYER_TRANSFORM,
|
|
SetLayerVisibleRegion = HWC2_FUNCTION_SET_LAYER_VISIBLE_REGION,
|
|
SetLayerZOrder = HWC2_FUNCTION_SET_LAYER_Z_ORDER,
|
|
SetOutputBuffer = HWC2_FUNCTION_SET_OUTPUT_BUFFER,
|
|
SetPowerMode = HWC2_FUNCTION_SET_POWER_MODE,
|
|
SetVsyncEnabled = HWC2_FUNCTION_SET_VSYNC_ENABLED,
|
|
ValidateDisplay = HWC2_FUNCTION_VALIDATE_DISPLAY,
|
|
SetLayerFloatColor = HWC2_FUNCTION_SET_LAYER_FLOAT_COLOR,
|
|
SetLayerPerFrameMetadata = HWC2_FUNCTION_SET_LAYER_PER_FRAME_METADATA,
|
|
GetPerFrameMetadataKeys = HWC2_FUNCTION_GET_PER_FRAME_METADATA_KEYS,
|
|
SetReadbackBuffer = HWC2_FUNCTION_SET_READBACK_BUFFER,
|
|
GetReadbackBufferAttributes = HWC2_FUNCTION_GET_READBACK_BUFFER_ATTRIBUTES,
|
|
GetReadbackBufferFence = HWC2_FUNCTION_GET_READBACK_BUFFER_FENCE,
|
|
GetRenderIntents = HWC2_FUNCTION_GET_RENDER_INTENTS,
|
|
SetColorModeWithRenderIntent = HWC2_FUNCTION_SET_COLOR_MODE_WITH_RENDER_INTENT,
|
|
GetDataspaceSaturationMatrix = HWC2_FUNCTION_GET_DATASPACE_SATURATION_MATRIX,
|
|
|
|
// composer 2.3
|
|
GetDisplayIdentificationData = HWC2_FUNCTION_GET_DISPLAY_IDENTIFICATION_DATA,
|
|
GetDisplayCapabilities = HWC2_FUNCTION_GET_DISPLAY_CAPABILITIES,
|
|
SetLayerColorTransform = HWC2_FUNCTION_SET_LAYER_COLOR_TRANSFORM,
|
|
GetDisplayedContentSamplingAttributes = HWC2_FUNCTION_GET_DISPLAYED_CONTENT_SAMPLING_ATTRIBUTES,
|
|
SetDisplayedContentSamplingEnabled = HWC2_FUNCTION_SET_DISPLAYED_CONTENT_SAMPLING_ENABLED,
|
|
GetDisplayedContentSample = HWC2_FUNCTION_GET_DISPLAYED_CONTENT_SAMPLE,
|
|
SetLayerPerFrameMetadataBlobs = HWC2_FUNCTION_SET_LAYER_PER_FRAME_METADATA_BLOBS,
|
|
GetDisplayBrightnessSupport = HWC2_FUNCTION_GET_DISPLAY_BRIGHTNESS_SUPPORT,
|
|
SetDisplayBrightness = HWC2_FUNCTION_SET_DISPLAY_BRIGHTNESS,
|
|
|
|
// composer 2.4
|
|
GetDisplayConnectionType = HWC2_FUNCTION_GET_DISPLAY_CONNECTION_TYPE,
|
|
GetDisplayVsyncPeriod = HWC2_FUNCTION_GET_DISPLAY_VSYNC_PERIOD,
|
|
SetActiveConfigWithConstraints = HWC2_FUNCTION_SET_ACTIVE_CONFIG_WITH_CONSTRAINTS,
|
|
|
|
};
|
|
TO_STRING(hwc2_function_descriptor_t, FunctionDescriptor,
|
|
getFunctionDescriptorName)
|
|
|
|
enum class LayerRequest : int32_t {
|
|
ClearClientTarget = HWC2_LAYER_REQUEST_CLEAR_CLIENT_TARGET,
|
|
};
|
|
TO_STRING(hwc2_layer_request_t, LayerRequest, getLayerRequestName)
|
|
|
|
enum class PowerMode : int32_t {
|
|
Off = HWC2_POWER_MODE_OFF,
|
|
DozeSuspend = HWC2_POWER_MODE_DOZE_SUSPEND,
|
|
Doze = HWC2_POWER_MODE_DOZE,
|
|
On = HWC2_POWER_MODE_ON,
|
|
};
|
|
TO_STRING(hwc2_power_mode_t, PowerMode, getPowerModeName)
|
|
|
|
enum class Transform : int32_t {
|
|
None = 0,
|
|
FlipH = HWC_TRANSFORM_FLIP_H,
|
|
FlipV = HWC_TRANSFORM_FLIP_V,
|
|
Rotate90 = HWC_TRANSFORM_ROT_90,
|
|
Rotate180 = HWC_TRANSFORM_ROT_180,
|
|
Rotate270 = HWC_TRANSFORM_ROT_270,
|
|
FlipHRotate90 = HWC_TRANSFORM_FLIP_H_ROT_90,
|
|
FlipVRotate90 = HWC_TRANSFORM_FLIP_V_ROT_90,
|
|
};
|
|
TO_STRING(hwc_transform_t, Transform, getTransformName)
|
|
|
|
enum class Vsync : int32_t {
|
|
Invalid = HWC2_VSYNC_INVALID,
|
|
Enable = HWC2_VSYNC_ENABLE,
|
|
Disable = HWC2_VSYNC_DISABLE,
|
|
};
|
|
TO_STRING(hwc2_vsync_t, Vsync, getVsyncName)
|
|
|
|
enum class DisplayCapability : int32_t {
|
|
Invalid = HWC2_DISPLAY_CAPABILITY_INVALID,
|
|
SkipClientColorTransform = HWC2_DISPLAY_CAPABILITY_SKIP_CLIENT_COLOR_TRANSFORM,
|
|
Doze = HWC2_DISPLAY_CAPABILITY_DOZE,
|
|
Brightness = HWC2_DISPLAY_CAPABILITY_BRIGHTNESS,
|
|
};
|
|
TO_STRING(hwc2_display_capability_t, DisplayCapability, getDisplayCapabilityName)
|
|
|
|
} // namespace HWC2
|
|
|
|
__BEGIN_DECLS
|
|
#endif // HWC2_USE_CPP11
|
|
|
|
/*
|
|
* Typedefs
|
|
*/
|
|
|
|
typedef void (*hwc2_function_pointer_t)();
|
|
|
|
typedef void* hwc2_callback_data_t;
|
|
typedef uint32_t hwc2_config_t;
|
|
typedef uint64_t hwc2_display_t;
|
|
typedef uint64_t hwc2_layer_t;
|
|
typedef uint32_t hwc2_vsync_period_t;
|
|
|
|
/*
|
|
* Device Struct
|
|
*/
|
|
|
|
typedef struct hwc2_device {
|
|
/* Must be the first member of this struct, since a pointer to this struct
|
|
* will be generated by casting from a hw_device_t* */
|
|
struct hw_device_t common;
|
|
|
|
/* getCapabilities(..., outCount, outCapabilities)
|
|
*
|
|
* Provides a list of capabilities (described in the definition of
|
|
* hwc2_capability_t above) supported by this device. This list must
|
|
* not change after the device has been loaded.
|
|
*
|
|
* Parameters:
|
|
* outCount - if outCapabilities was NULL, the number of capabilities
|
|
* which would have been returned; if outCapabilities was not NULL,
|
|
* the number of capabilities returned, which must not exceed the
|
|
* value stored in outCount prior to the call
|
|
* outCapabilities - a list of capabilities supported by this device; may
|
|
* be NULL, in which case this function must write into outCount the
|
|
* number of capabilities which would have been written into
|
|
* outCapabilities
|
|
*/
|
|
void (*getCapabilities)(struct hwc2_device* device, uint32_t* outCount,
|
|
int32_t* /*hwc2_capability_t*/ outCapabilities);
|
|
|
|
/* getFunction(..., descriptor)
|
|
*
|
|
* Returns a function pointer which implements the requested description.
|
|
*
|
|
* Parameters:
|
|
* descriptor - the function to return
|
|
*
|
|
* Returns either a function pointer implementing the requested descriptor
|
|
* or NULL if the described function is not supported by this device.
|
|
*/
|
|
hwc2_function_pointer_t (*getFunction)(struct hwc2_device* device,
|
|
int32_t /*hwc2_function_descriptor_t*/ descriptor);
|
|
} hwc2_device_t;
|
|
|
|
static inline int hwc2_open(const struct hw_module_t* module,
|
|
hwc2_device_t** device) {
|
|
return module->methods->open(module, HWC_HARDWARE_COMPOSER,
|
|
TO_HW_DEVICE_T_OPEN(device));
|
|
}
|
|
|
|
static inline int hwc2_close(hwc2_device_t* device) {
|
|
return device->common.close(&device->common);
|
|
}
|
|
|
|
/*
|
|
* Callbacks
|
|
*
|
|
* All of these callbacks take as their first parameter the callbackData which
|
|
* was provided at the time of callback registration, so this parameter is
|
|
* omitted from the described parameter lists.
|
|
*/
|
|
|
|
/* hotplug(..., display, connected)
|
|
* Descriptor: HWC2_CALLBACK_HOTPLUG
|
|
* Will be provided to all HWC2 devices
|
|
*
|
|
* Notifies the client that the given display has either been connected or
|
|
* disconnected. Every active display (even a built-in physical display) must
|
|
* trigger at least one hotplug notification, even if it only occurs immediately
|
|
* after callback registration.
|
|
*
|
|
* The client may call back into the device on the same thread to query display
|
|
* properties (such as width, height, and vsync period), and other threads may
|
|
* call into the device while the callback is in progress. The device must
|
|
* serialize calls to this callback such that only one thread is calling it at a
|
|
* time.
|
|
*
|
|
* Displays which have been connected are assumed to be in HWC2_POWER_MODE_OFF,
|
|
* and the vsync callback should not be called for a display until vsync has
|
|
* been enabled with setVsyncEnabled.
|
|
*
|
|
* Parameters:
|
|
* display - the display which has been hotplugged
|
|
* connected - whether the display has been connected or disconnected
|
|
*/
|
|
typedef void (*HWC2_PFN_HOTPLUG)(hwc2_callback_data_t callbackData,
|
|
hwc2_display_t display, int32_t /*hwc2_connection_t*/ connected);
|
|
|
|
/* refresh(..., display)
|
|
* Descriptor: HWC2_CALLBACK_REFRESH
|
|
* Will be provided to all HWC2 devices
|
|
*
|
|
* Notifies the client to trigger a screen refresh. This forces all layer state
|
|
* for this display to be resent, and the display to be validated and presented,
|
|
* even if there have been no changes.
|
|
*
|
|
* This refresh will occur some time after the callback is initiated, but not
|
|
* necessarily before it returns. This thread, however, is guaranteed not to
|
|
* call back into the device, thus it is safe to trigger this callback from
|
|
* other functions which call into the device.
|
|
*
|
|
* Parameters:
|
|
* display - the display to refresh
|
|
*/
|
|
typedef void (*HWC2_PFN_REFRESH)(hwc2_callback_data_t callbackData,
|
|
hwc2_display_t display);
|
|
|
|
/* vsync(..., display, timestamp)
|
|
* Descriptor: HWC2_CALLBACK_VSYNC
|
|
* Will be provided to all HWC2 devices
|
|
*
|
|
* Notifies the client that a vsync event has occurred. This callback must
|
|
* only be triggered when vsync is enabled for this display (through
|
|
* setVsyncEnabled).
|
|
*
|
|
* This callback should be triggered from a thread of at least
|
|
* HAL_PRIORITY_URGENT_DISPLAY with as little latency as possible, typically
|
|
* less than 0.5 ms. This thread is guaranteed not to call back into the device.
|
|
*
|
|
* Parameters:
|
|
* display - the display which has received a vsync event
|
|
* timestamp - the CLOCK_MONOTONIC time at which the vsync event occurred, in
|
|
* nanoseconds
|
|
*/
|
|
typedef void (*HWC2_PFN_VSYNC)(hwc2_callback_data_t callbackData,
|
|
hwc2_display_t display, int64_t timestamp);
|
|
|
|
/* vsync_2_4(..., display, timestamp, vsyncPeriodNanos)
|
|
* Descriptor: HWC2_CALLBACK_VSYNC_2_4
|
|
* Required for HWC2 devices for composer 2.4
|
|
*
|
|
* Notifies the client that a vsync event has occurred. This callback must
|
|
* only be triggered when vsync is enabled for this display (through
|
|
* setVsyncEnabled).
|
|
*
|
|
* This callback should be triggered from a thread of at least
|
|
* HAL_PRIORITY_URGENT_DISPLAY with as little latency as possible, typically
|
|
* less than 0.5 ms. This thread is guaranteed not to call back into the device.
|
|
*
|
|
* Parameters:
|
|
* display - the display which has received a vsync event
|
|
* timestamp - the CLOCK_MONOTONIC time at which the vsync event occurred, in
|
|
* nanoseconds
|
|
* vsyncPeriodNanos - the display vsync period in nanoseconds i.e. the next onVsync2_4 is
|
|
* expected to be called vsyncPeriod nanoseconds after this call.
|
|
*/
|
|
typedef void (*HWC2_PFN_VSYNC_2_4)(hwc2_callback_data_t callbackData,
|
|
hwc2_display_t display, int64_t timestamp, hwc2_vsync_period_t vsyncPeriodNanos);
|
|
|
|
/* vsyncPeriodTimingChanged(..., display, updated_timeline)
|
|
* Descriptor: HWC2_CALLBACK_VSYNC_PERIOD_TIMING_CHANGED
|
|
* Optional for HWC2 devices for composer 2.4
|
|
*
|
|
* Notifies the client that the previously reported timing for vsync period change has been
|
|
* updated. This may occur if the composer missed the deadline for changing the vsync period
|
|
* or the client submitted a refresh frame too late.
|
|
*
|
|
* This callback should be triggered from a thread of at least
|
|
* HAL_PRIORITY_URGENT_DISPLAY with as little latency as possible, typically
|
|
* less than 0.5 ms. This thread is guaranteed not to call back into the device.
|
|
*
|
|
* Parameters:
|
|
* display - the display which has received a vsync event
|
|
* updated_timeline - new timeline for the vsync period change
|
|
*/
|
|
typedef void (*HWC2_PFN_VSYNC_PERIOD_TIMING_CHANGED)(hwc2_callback_data_t callbackData,
|
|
hwc2_display_t display, hwc_vsync_period_change_timeline_t* updated_timeline);
|
|
|
|
/*
|
|
* Device Functions
|
|
*
|
|
* All of these functions take as their first parameter a device pointer, so
|
|
* this parameter is omitted from the described parameter lists.
|
|
*/
|
|
|
|
/* createVirtualDisplay(..., width, height, format, outDisplay)
|
|
* Descriptor: HWC2_FUNCTION_CREATE_VIRTUAL_DISPLAY
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Creates a new virtual display with the given width and height. The format
|
|
* passed into this function is the default format requested by the consumer of
|
|
* the virtual display output buffers. If a different format will be returned by
|
|
* the device, it should be returned in this parameter so it can be set properly
|
|
* when handing the buffers to the consumer.
|
|
*
|
|
* The display will be assumed to be on from the time the first frame is
|
|
* presented until the display is destroyed.
|
|
*
|
|
* Parameters:
|
|
* width - width in pixels
|
|
* height - height in pixels
|
|
* format - prior to the call, the default output buffer format selected by
|
|
* the consumer; after the call, the format the device will produce
|
|
* outDisplay - the newly-created virtual display; pointer will be non-NULL
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_UNSUPPORTED - the width or height is too large for the device to
|
|
* be able to create a virtual display
|
|
* HWC2_ERROR_NO_RESOURCES - the device is unable to create a new virtual
|
|
* display at this time
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_CREATE_VIRTUAL_DISPLAY)(
|
|
hwc2_device_t* device, uint32_t width, uint32_t height,
|
|
int32_t* /*android_pixel_format_t*/ format, hwc2_display_t* outDisplay);
|
|
|
|
/* destroyVirtualDisplay(..., display)
|
|
* Descriptor: HWC2_FUNCTION_DESTROY_VIRTUAL_DISPLAY
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Destroys a virtual display. After this call all resources consumed by this
|
|
* display may be freed by the device and any operations performed on this
|
|
* display should fail.
|
|
*
|
|
* Parameters:
|
|
* display - the virtual display to destroy
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
* HWC2_ERROR_BAD_PARAMETER - the display handle which was passed in does not
|
|
* refer to a virtual display
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_DESTROY_VIRTUAL_DISPLAY)(
|
|
hwc2_device_t* device, hwc2_display_t display);
|
|
|
|
/* dump(..., outSize, outBuffer)
|
|
* Descriptor: HWC2_FUNCTION_DUMP
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Retrieves implementation-defined debug information, which will be displayed
|
|
* during, for example, `dumpsys SurfaceFlinger`.
|
|
*
|
|
* If called with outBuffer == NULL, the device should store a copy of the
|
|
* desired output and return its length in bytes in outSize. If the device
|
|
* already has a stored copy, that copy should be purged and replaced with a
|
|
* fresh copy.
|
|
*
|
|
* If called with outBuffer != NULL, the device should copy its stored version
|
|
* of the output into outBuffer and store how many bytes of data it copied into
|
|
* outSize. Prior to this call, the client will have populated outSize with the
|
|
* maximum number of bytes outBuffer can hold. The device must not write more
|
|
* than this amount into outBuffer. If the device does not currently have a
|
|
* stored copy, then it should return 0 in outSize.
|
|
*
|
|
* Any data written into outBuffer need not be null-terminated.
|
|
*
|
|
* Parameters:
|
|
* outSize - if outBuffer was NULL, the number of bytes needed to copy the
|
|
* device's stored output; if outBuffer was not NULL, the number of bytes
|
|
* written into it, which must not exceed the value stored in outSize
|
|
* prior to the call; pointer will be non-NULL
|
|
* outBuffer - the buffer to write the dump output into; may be NULL as
|
|
* described above; data written into this buffer need not be
|
|
* null-terminated
|
|
*/
|
|
typedef void (*HWC2_PFN_DUMP)(hwc2_device_t* device, uint32_t* outSize,
|
|
char* outBuffer);
|
|
|
|
/* getMaxVirtualDisplayCount(...)
|
|
* Descriptor: HWC2_FUNCTION_GET_MAX_VIRTUAL_DISPLAY_COUNT
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Returns the maximum number of virtual displays supported by this device
|
|
* (which may be 0). The client will not attempt to create more than this many
|
|
* virtual displays on this device. This number must not change for the lifetime
|
|
* of the device.
|
|
*/
|
|
typedef uint32_t (*HWC2_PFN_GET_MAX_VIRTUAL_DISPLAY_COUNT)(
|
|
hwc2_device_t* device);
|
|
|
|
/* registerCallback(..., descriptor, callbackData, pointer)
|
|
* Descriptor: HWC2_FUNCTION_REGISTER_CALLBACK
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Provides a callback for the device to call. All callbacks take a callbackData
|
|
* item as the first parameter, so this value should be stored with the callback
|
|
* for later use. The callbackData may differ from one callback to another. If
|
|
* this function is called multiple times with the same descriptor, later
|
|
* callbacks replace earlier ones.
|
|
*
|
|
* Parameters:
|
|
* descriptor - which callback should be set
|
|
* callBackdata - opaque data which must be passed back through the callback
|
|
* pointer - a non-NULL function pointer corresponding to the descriptor
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_PARAMETER - descriptor was invalid
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_REGISTER_CALLBACK)(
|
|
hwc2_device_t* device,
|
|
int32_t /*hwc2_callback_descriptor_t*/ descriptor,
|
|
hwc2_callback_data_t callbackData, hwc2_function_pointer_t pointer);
|
|
|
|
/* getDataspaceSaturationMatrix(..., dataspace, outMatrix)
|
|
* Descriptor: HWC2_FUNCTION_GET_DATASPACE_SATURATION_MATRIX
|
|
* Provided by HWC2 devices which don't return nullptr function pointer.
|
|
*
|
|
* Get the saturation matrix of the specified dataspace. The saturation matrix
|
|
* can be used to approximate the dataspace saturation operation performed by
|
|
* the HWC2 device when non-colorimetric mapping is allowed. It is to be
|
|
* applied on linear pixel values.
|
|
*
|
|
* Parameters:
|
|
* dataspace - the dataspace to query for
|
|
* outMatrix - a column-major 4x4 matrix (16 floats). It must be an identity
|
|
* matrix unless dataspace is HAL_DATASPACE_SRGB_LINEAR.
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_PARAMETER - dataspace was invalid
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_GET_DATASPACE_SATURATION_MATRIX)(
|
|
hwc2_device_t* device, int32_t /*android_dataspace_t*/ dataspace,
|
|
float* outMatrix);
|
|
|
|
/*
|
|
* Display Functions
|
|
*
|
|
* All of these functions take as their first two parameters a device pointer
|
|
* and a display handle, so these parameters are omitted from the described
|
|
* parameter lists.
|
|
*/
|
|
|
|
/* acceptDisplayChanges(...)
|
|
* Descriptor: HWC2_FUNCTION_ACCEPT_DISPLAY_CHANGES
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Accepts the changes required by the device from the previous validateDisplay
|
|
* call (which may be queried using getChangedCompositionTypes) and revalidates
|
|
* the display. This function is equivalent to requesting the changed types from
|
|
* getChangedCompositionTypes, setting those types on the corresponding layers,
|
|
* and then calling validateDisplay again.
|
|
*
|
|
* After this call it must be valid to present this display. Calling this after
|
|
* validateDisplay returns 0 changes must succeed with HWC2_ERROR_NONE, but
|
|
* should have no other effect.
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
* HWC2_ERROR_NOT_VALIDATED - validateDisplay has not been called
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_ACCEPT_DISPLAY_CHANGES)(
|
|
hwc2_device_t* device, hwc2_display_t display);
|
|
|
|
/* createLayer(..., outLayer)
|
|
* Descriptor: HWC2_FUNCTION_CREATE_LAYER
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Creates a new layer on the given display.
|
|
*
|
|
* Parameters:
|
|
* outLayer - the handle of the new layer; pointer will be non-NULL
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
* HWC2_ERROR_NO_RESOURCES - the device was unable to create this layer
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_CREATE_LAYER)(hwc2_device_t* device,
|
|
hwc2_display_t display, hwc2_layer_t* outLayer);
|
|
|
|
/* destroyLayer(..., layer)
|
|
* Descriptor: HWC2_FUNCTION_DESTROY_LAYER
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Destroys the given layer.
|
|
*
|
|
* Parameters:
|
|
* layer - the handle of the layer to destroy
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
* HWC2_ERROR_BAD_LAYER - an invalid layer handle was passed in
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_DESTROY_LAYER)(
|
|
hwc2_device_t* device, hwc2_display_t display, hwc2_layer_t layer);
|
|
|
|
/* getActiveConfig(..., outConfig)
|
|
* Descriptor: HWC2_FUNCTION_GET_ACTIVE_CONFIG
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Retrieves which display configuration is currently active.
|
|
*
|
|
* If no display configuration is currently active, this function must return
|
|
* HWC2_ERROR_BAD_CONFIG and place no configuration handle in outConfig. It is
|
|
* the responsibility of the client to call setActiveConfig with a valid
|
|
* configuration before attempting to present anything on the display.
|
|
*
|
|
* Parameters:
|
|
* outConfig - the currently active display configuration; pointer will be
|
|
* non-NULL
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
* HWC2_ERROR_BAD_CONFIG - no configuration is currently active
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_GET_ACTIVE_CONFIG)(
|
|
hwc2_device_t* device, hwc2_display_t display,
|
|
hwc2_config_t* outConfig);
|
|
|
|
/* getChangedCompositionTypes(..., outNumElements, outLayers, outTypes)
|
|
* Descriptor: HWC2_FUNCTION_GET_CHANGED_COMPOSITION_TYPES
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Retrieves the layers for which the device requires a different composition
|
|
* type than had been set prior to the last call to validateDisplay. The client
|
|
* will either update its state with these types and call acceptDisplayChanges,
|
|
* or will set new types and attempt to validate the display again.
|
|
*
|
|
* outLayers and outTypes may be NULL to retrieve the number of elements which
|
|
* will be returned. The number of elements returned must be the same as the
|
|
* value returned in outNumTypes from the last call to validateDisplay.
|
|
*
|
|
* Parameters:
|
|
* outNumElements - if outLayers or outTypes were NULL, the number of layers
|
|
* and types which would have been returned; if both were non-NULL, the
|
|
* number of elements returned in outLayers and outTypes, which must not
|
|
* exceed the value stored in outNumElements prior to the call; pointer
|
|
* will be non-NULL
|
|
* outLayers - an array of layer handles
|
|
* outTypes - an array of composition types, each corresponding to an element
|
|
* of outLayers
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
* HWC2_ERROR_NOT_VALIDATED - validateDisplay has not been called for this
|
|
* display
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_GET_CHANGED_COMPOSITION_TYPES)(
|
|
hwc2_device_t* device, hwc2_display_t display,
|
|
uint32_t* outNumElements, hwc2_layer_t* outLayers,
|
|
int32_t* /*hwc2_composition_t*/ outTypes);
|
|
|
|
/* getClientTargetSupport(..., width, height, format, dataspace)
|
|
* Descriptor: HWC2_FUNCTION_GET_CLIENT_TARGET_SUPPORT
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Returns whether a client target with the given properties can be handled by
|
|
* the device.
|
|
*
|
|
* The valid formats can be found in android_pixel_format_t in
|
|
* <system/graphics.h>.
|
|
*
|
|
* For more about dataspaces, see setLayerDataspace.
|
|
*
|
|
* This function must return true for a client target with width and height
|
|
* equal to the active display configuration dimensions,
|
|
* HAL_PIXEL_FORMAT_RGBA_8888, and HAL_DATASPACE_UNKNOWN. It is not required to
|
|
* return true for any other configuration.
|
|
*
|
|
* Parameters:
|
|
* width - client target width in pixels
|
|
* height - client target height in pixels
|
|
* format - client target format
|
|
* dataspace - client target dataspace, as described in setLayerDataspace
|
|
*
|
|
* Returns HWC2_ERROR_NONE if the given configuration is supported or one of the
|
|
* following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
* HWC2_ERROR_UNSUPPORTED - the given configuration is not supported
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_GET_CLIENT_TARGET_SUPPORT)(
|
|
hwc2_device_t* device, hwc2_display_t display, uint32_t width,
|
|
uint32_t height, int32_t /*android_pixel_format_t*/ format,
|
|
int32_t /*android_dataspace_t*/ dataspace);
|
|
|
|
/* getColorModes(..., outNumModes, outModes)
|
|
* Descriptor: HWC2_FUNCTION_GET_COLOR_MODES
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Returns the color modes supported on this display.
|
|
*
|
|
* The valid color modes can be found in android_color_mode_t in
|
|
* <system/graphics.h>. All HWC2 devices must support at least
|
|
* HAL_COLOR_MODE_NATIVE.
|
|
*
|
|
* outNumModes may be NULL to retrieve the number of modes which will be
|
|
* returned.
|
|
*
|
|
* Parameters:
|
|
* outNumModes - if outModes was NULL, the number of modes which would have
|
|
* been returned; if outModes was not NULL, the number of modes returned,
|
|
* which must not exceed the value stored in outNumModes prior to the
|
|
* call; pointer will be non-NULL
|
|
* outModes - an array of color modes
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_GET_COLOR_MODES)(
|
|
hwc2_device_t* device, hwc2_display_t display, uint32_t* outNumModes,
|
|
int32_t* /*android_color_mode_t*/ outModes);
|
|
|
|
/* getRenderIntents(..., mode, outNumIntents, outIntents)
|
|
* Descriptor: HWC2_FUNCTION_GET_RENDER_INTENTS
|
|
* Provided by HWC2 devices which don't return nullptr function pointer.
|
|
*
|
|
* Returns the render intents supported on this display.
|
|
*
|
|
* The valid render intents can be found in android_render_intent_v1_1_t in
|
|
* <system/graphics.h>. All HWC2 devices must support at least
|
|
* HAL_RENDER_INTENT_COLORIMETRIC.
|
|
*
|
|
* outNumIntents may be NULL to retrieve the number of intents which will be
|
|
* returned.
|
|
*
|
|
* Parameters:
|
|
* mode - the color mode to query the render intents for
|
|
* outNumIntents - if outIntents was NULL, the number of intents which would
|
|
* have been returned; if outIntents was not NULL, the number of intents
|
|
* returned, which must not exceed the value stored in outNumIntents
|
|
* prior to the call; pointer will be non-NULL
|
|
* outIntents - an array of render intents
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_GET_RENDER_INTENTS)(
|
|
hwc2_device_t* device, hwc2_display_t display, int32_t mode,
|
|
uint32_t* outNumIntents,
|
|
int32_t* /*android_render_intent_v1_1_t*/ outIntents);
|
|
|
|
/* getDisplayAttribute(..., config, attribute, outValue)
|
|
* Descriptor: HWC2_FUNCTION_GET_DISPLAY_ATTRIBUTE
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Returns a display attribute value for a particular display configuration.
|
|
*
|
|
* Any attribute which is not supported or for which the value is unknown by the
|
|
* device must return a value of -1.
|
|
*
|
|
* Parameters:
|
|
* config - the display configuration for which to return attribute values
|
|
* attribute - the attribute to query
|
|
* outValue - the value of the attribute; the pointer will be non-NULL
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
* HWC2_ERROR_BAD_CONFIG - config does not name a valid configuration for this
|
|
* display
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_GET_DISPLAY_ATTRIBUTE)(
|
|
hwc2_device_t* device, hwc2_display_t display, hwc2_config_t config,
|
|
int32_t /*hwc2_attribute_t*/ attribute, int32_t* outValue);
|
|
|
|
/* getDisplayConfigs(..., outNumConfigs, outConfigs)
|
|
* Descriptor: HWC2_FUNCTION_GET_DISPLAY_CONFIGS
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Returns handles for all of the valid display configurations on this display.
|
|
*
|
|
* outConfigs may be NULL to retrieve the number of elements which will be
|
|
* returned.
|
|
*
|
|
* Parameters:
|
|
* outNumConfigs - if outConfigs was NULL, the number of configurations which
|
|
* would have been returned; if outConfigs was not NULL, the number of
|
|
* configurations returned, which must not exceed the value stored in
|
|
* outNumConfigs prior to the call; pointer will be non-NULL
|
|
* outConfigs - an array of configuration handles
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_GET_DISPLAY_CONFIGS)(
|
|
hwc2_device_t* device, hwc2_display_t display, uint32_t* outNumConfigs,
|
|
hwc2_config_t* outConfigs);
|
|
|
|
/* getDisplayName(..., outSize, outName)
|
|
* Descriptor: HWC2_FUNCTION_GET_DISPLAY_NAME
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Returns a human-readable version of the display's name.
|
|
*
|
|
* outName may be NULL to retrieve the length of the name.
|
|
*
|
|
* Parameters:
|
|
* outSize - if outName was NULL, the number of bytes needed to return the
|
|
* name if outName was not NULL, the number of bytes written into it,
|
|
* which must not exceed the value stored in outSize prior to the call;
|
|
* pointer will be non-NULL
|
|
* outName - the display's name
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_GET_DISPLAY_NAME)(
|
|
hwc2_device_t* device, hwc2_display_t display, uint32_t* outSize,
|
|
char* outName);
|
|
|
|
/* getDisplayRequests(..., outDisplayRequests, outNumElements, outLayers,
|
|
* outLayerRequests)
|
|
* Descriptor: HWC2_FUNCTION_GET_DISPLAY_REQUESTS
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Returns the display requests and the layer requests required for the last
|
|
* validated configuration.
|
|
*
|
|
* Display requests provide information about how the client should handle the
|
|
* client target. Layer requests provide information about how the client
|
|
* should handle an individual layer.
|
|
*
|
|
* If outLayers or outLayerRequests is NULL, the required number of layers and
|
|
* requests must be returned in outNumElements, but this number may also be
|
|
* obtained from validateDisplay as outNumRequests (outNumElements must be equal
|
|
* to the value returned in outNumRequests from the last call to
|
|
* validateDisplay).
|
|
*
|
|
* Parameters:
|
|
* outDisplayRequests - the display requests for the current validated state
|
|
* outNumElements - if outLayers or outLayerRequests were NULL, the number of
|
|
* elements which would have been returned, which must be equal to the
|
|
* value returned in outNumRequests from the last validateDisplay call on
|
|
* this display; if both were not NULL, the number of elements in
|
|
* outLayers and outLayerRequests, which must not exceed the value stored
|
|
* in outNumElements prior to the call; pointer will be non-NULL
|
|
* outLayers - an array of layers which all have at least one request
|
|
* outLayerRequests - the requests corresponding to each element of outLayers
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
* HWC2_ERROR_NOT_VALIDATED - validateDisplay has not been called for this
|
|
* display
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_GET_DISPLAY_REQUESTS)(
|
|
hwc2_device_t* device, hwc2_display_t display,
|
|
int32_t* /*hwc2_display_request_t*/ outDisplayRequests,
|
|
uint32_t* outNumElements, hwc2_layer_t* outLayers,
|
|
int32_t* /*hwc2_layer_request_t*/ outLayerRequests);
|
|
|
|
/* getDisplayType(..., outType)
|
|
* Descriptor: HWC2_FUNCTION_GET_DISPLAY_TYPE
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Returns whether the given display is a physical or virtual display.
|
|
*
|
|
* Parameters:
|
|
* outType - the type of the display; pointer will be non-NULL
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_GET_DISPLAY_TYPE)(
|
|
hwc2_device_t* device, hwc2_display_t display,
|
|
int32_t* /*hwc2_display_type_t*/ outType);
|
|
|
|
/* getDisplayIdentificationData(..., outPort, outDataSize, outData)
|
|
* Descriptor: HWC2_FUNCTION_GET_DISPLAY_IDENTIFICATION_DATA
|
|
* Optional for HWC2 devices
|
|
*
|
|
* If supported, getDisplayIdentificationData returns the port and data that
|
|
* describe a physical display. The port is a unique number that identifies a
|
|
* physical connector (e.g. eDP, HDMI) for display output. The data blob is
|
|
* parsed to determine its format, typically EDID 1.3 as specified in VESA
|
|
* E-EDID Standard Release A Revision 1.
|
|
*
|
|
* Devices for which display identification is unsupported must return null when
|
|
* getFunction is called with HWC2_FUNCTION_GET_DISPLAY_IDENTIFICATION_DATA.
|
|
*
|
|
* Parameters:
|
|
* outPort - the connector to which the display is connected;
|
|
* pointer will be non-NULL
|
|
* outDataSize - if outData is NULL, the size in bytes of the data which would
|
|
* have been returned; if outData is not NULL, the size of outData, which
|
|
* must not exceed the value stored in outDataSize prior to the call;
|
|
* pointer will be non-NULL
|
|
* outData - the EDID 1.3 blob identifying the display
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_GET_DISPLAY_IDENTIFICATION_DATA)(
|
|
hwc2_device_t* device, hwc2_display_t display, uint8_t* outPort,
|
|
uint32_t* outDataSize, uint8_t* outData);
|
|
|
|
/* getDozeSupport(..., outSupport)
|
|
* Descriptor: HWC2_FUNCTION_GET_DOZE_SUPPORT
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Returns whether the given display supports HWC2_POWER_MODE_DOZE and
|
|
* HWC2_POWER_MODE_DOZE_SUSPEND. DOZE_SUSPEND may not provide any benefit over
|
|
* DOZE (see the definition of hwc2_power_mode_t for more information), but if
|
|
* both DOZE and DOZE_SUSPEND are no different from HWC2_POWER_MODE_ON, the
|
|
* device should not claim support.
|
|
*
|
|
* Parameters:
|
|
* outSupport - whether the display supports doze modes (1 for yes, 0 for no);
|
|
* pointer will be non-NULL
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_GET_DOZE_SUPPORT)(
|
|
hwc2_device_t* device, hwc2_display_t display, int32_t* outSupport);
|
|
|
|
/* getHdrCapabilities(..., outNumTypes, outTypes, outMaxLuminance,
|
|
* outMaxAverageLuminance, outMinLuminance)
|
|
* Descriptor: HWC2_FUNCTION_GET_HDR_CAPABILITIES
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Returns the high dynamic range (HDR) capabilities of the given display, which
|
|
* are invariant with regard to the active configuration.
|
|
*
|
|
* Displays which are not HDR-capable must return no types in outTypes and set
|
|
* outNumTypes to 0.
|
|
*
|
|
* If outTypes is NULL, the required number of HDR types must be returned in
|
|
* outNumTypes.
|
|
*
|
|
* Parameters:
|
|
* outNumTypes - if outTypes was NULL, the number of types which would have
|
|
* been returned; if it was not NULL, the number of types stored in
|
|
* outTypes, which must not exceed the value stored in outNumTypes prior
|
|
* to the call; pointer will be non-NULL
|
|
* outTypes - an array of HDR types, may have 0 elements if the display is not
|
|
* HDR-capable
|
|
* outMaxLuminance - the desired content maximum luminance for this display in
|
|
* cd/m^2; pointer will be non-NULL
|
|
* outMaxAverageLuminance - the desired content maximum frame-average
|
|
* luminance for this display in cd/m^2; pointer will be non-NULL
|
|
* outMinLuminance - the desired content minimum luminance for this display in
|
|
* cd/m^2; pointer will be non-NULL
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_GET_HDR_CAPABILITIES)(
|
|
hwc2_device_t* device, hwc2_display_t display, uint32_t* outNumTypes,
|
|
int32_t* /*android_hdr_t*/ outTypes, float* outMaxLuminance,
|
|
float* outMaxAverageLuminance, float* outMinLuminance);
|
|
|
|
/* getReleaseFences(..., outNumElements, outLayers, outFences)
|
|
* Descriptor: HWC2_FUNCTION_GET_RELEASE_FENCES
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Retrieves the release fences for device layers on this display which will
|
|
* receive new buffer contents this frame.
|
|
*
|
|
* A release fence is a file descriptor referring to a sync fence object which
|
|
* will be signaled after the device has finished reading from the buffer
|
|
* presented in the prior frame. This indicates that it is safe to start writing
|
|
* to the buffer again. If a given layer's fence is not returned from this
|
|
* function, it will be assumed that the buffer presented on the previous frame
|
|
* is ready to be written.
|
|
*
|
|
* The fences returned by this function should be unique for each layer (even if
|
|
* they point to the same underlying sync object), and ownership of the fences
|
|
* is transferred to the client, which is responsible for closing them.
|
|
*
|
|
* If outLayers or outFences is NULL, the required number of layers and fences
|
|
* must be returned in outNumElements.
|
|
*
|
|
* Parameters:
|
|
* outNumElements - if outLayers or outFences were NULL, the number of
|
|
* elements which would have been returned; if both were not NULL, the
|
|
* number of elements in outLayers and outFences, which must not exceed
|
|
* the value stored in outNumElements prior to the call; pointer will be
|
|
* non-NULL
|
|
* outLayers - an array of layer handles
|
|
* outFences - an array of sync fence file descriptors as described above,
|
|
* each corresponding to an element of outLayers
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_GET_RELEASE_FENCES)(
|
|
hwc2_device_t* device, hwc2_display_t display, uint32_t* outNumElements,
|
|
hwc2_layer_t* outLayers, int32_t* outFences);
|
|
|
|
/* presentDisplay(..., outPresentFence)
|
|
* Descriptor: HWC2_FUNCTION_PRESENT_DISPLAY
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Presents the current display contents on the screen (or in the case of
|
|
* virtual displays, into the output buffer).
|
|
*
|
|
* Prior to calling this function, the display must be successfully validated
|
|
* with validateDisplay. Note that setLayerBuffer and setLayerSurfaceDamage
|
|
* specifically do not count as layer state, so if there are no other changes
|
|
* to the layer state (or to the buffer's properties as described in
|
|
* setLayerBuffer), then it is safe to call this function without first
|
|
* validating the display.
|
|
*
|
|
* If this call succeeds, outPresentFence will be populated with a file
|
|
* descriptor referring to a present sync fence object. For physical displays,
|
|
* this fence will be signaled at the vsync when the result of composition of
|
|
* this frame starts to appear (for video-mode panels) or starts to transfer to
|
|
* panel memory (for command-mode panels). For virtual displays, this fence will
|
|
* be signaled when writes to the output buffer have completed and it is safe to
|
|
* read from it.
|
|
*
|
|
* Parameters:
|
|
* outPresentFence - a sync fence file descriptor as described above; pointer
|
|
* will be non-NULL
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
* HWC2_ERROR_NO_RESOURCES - no valid output buffer has been set for a virtual
|
|
* display
|
|
* HWC2_ERROR_NOT_VALIDATED - validateDisplay has not successfully been called
|
|
* for this display
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_PRESENT_DISPLAY)(
|
|
hwc2_device_t* device, hwc2_display_t display,
|
|
int32_t* outPresentFence);
|
|
|
|
/* setActiveConfig(..., config)
|
|
* Descriptor: HWC2_FUNCTION_SET_ACTIVE_CONFIG
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Sets the active configuration for this display. Upon returning, the given
|
|
* display configuration should be active and remain so until either this
|
|
* function is called again or the display is disconnected.
|
|
*
|
|
* Parameters:
|
|
* config - the new display configuration
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
* HWC2_ERROR_BAD_CONFIG - the configuration handle passed in is not valid for
|
|
* this display
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_SET_ACTIVE_CONFIG)(
|
|
hwc2_device_t* device, hwc2_display_t display, hwc2_config_t config);
|
|
|
|
/* setClientTarget(..., target, acquireFence, dataspace, damage)
|
|
* Descriptor: HWC2_FUNCTION_SET_CLIENT_TARGET
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Sets the buffer handle which will receive the output of client composition.
|
|
* Layers marked as HWC2_COMPOSITION_CLIENT will be composited into this buffer
|
|
* prior to the call to presentDisplay, and layers not marked as
|
|
* HWC2_COMPOSITION_CLIENT should be composited with this buffer by the device.
|
|
*
|
|
* The buffer handle provided may be null if no layers are being composited by
|
|
* the client. This must not result in an error (unless an invalid display
|
|
* handle is also provided).
|
|
*
|
|
* Also provides a file descriptor referring to an acquire sync fence object,
|
|
* which will be signaled when it is safe to read from the client target buffer.
|
|
* If it is already safe to read from this buffer, -1 may be passed instead.
|
|
* The device must ensure that it is safe for the client to close this file
|
|
* descriptor at any point after this function is called.
|
|
*
|
|
* For more about dataspaces, see setLayerDataspace.
|
|
*
|
|
* The damage parameter describes a surface damage region as defined in the
|
|
* description of setLayerSurfaceDamage.
|
|
*
|
|
* Will be called before presentDisplay if any of the layers are marked as
|
|
* HWC2_COMPOSITION_CLIENT. If no layers are so marked, then it is not
|
|
* necessary to call this function. It is not necessary to call validateDisplay
|
|
* after changing the target through this function.
|
|
*
|
|
* Parameters:
|
|
* target - the new target buffer
|
|
* acquireFence - a sync fence file descriptor as described above
|
|
* dataspace - the dataspace of the buffer, as described in setLayerDataspace
|
|
* damage - the surface damage region
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
* HWC2_ERROR_BAD_PARAMETER - the new target handle was invalid
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_SET_CLIENT_TARGET)(
|
|
hwc2_device_t* device, hwc2_display_t display, buffer_handle_t target,
|
|
int32_t acquireFence, int32_t /*android_dataspace_t*/ dataspace,
|
|
hwc_region_t damage);
|
|
|
|
/* setColorMode(..., mode)
|
|
* Descriptor: HWC2_FUNCTION_SET_COLOR_MODE
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Sets the color mode of the given display.
|
|
*
|
|
* This must be called outside of validateDisplay/presentDisplay, and it takes
|
|
* effect on next presentDisplay.
|
|
*
|
|
* The valid color modes can be found in android_color_mode_t in
|
|
* <system/graphics.h>. All HWC2 devices must support at least
|
|
* HAL_COLOR_MODE_NATIVE, and displays are assumed to be in this mode upon
|
|
* hotplug.
|
|
*
|
|
* Parameters:
|
|
* mode - the mode to set
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
* HWC2_ERROR_BAD_PARAMETER - mode is not a valid color mode
|
|
* HWC2_ERROR_UNSUPPORTED - mode is not supported on this display
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_SET_COLOR_MODE)(
|
|
hwc2_device_t* device, hwc2_display_t display,
|
|
int32_t /*android_color_mode_t*/ mode);
|
|
|
|
/* setColorModeWithIntent(..., mode, intent)
|
|
* Descriptor: HWC2_FUNCTION_SET_COLOR_MODE_WITH_RENDER_INTENT
|
|
* Provided by HWC2 devices which don't return nullptr function pointer.
|
|
*
|
|
* This must be called outside of validateDisplay/presentDisplay, and it takes
|
|
* effect on next presentDisplay.
|
|
*
|
|
* The valid color modes and render intents can be found in
|
|
* android_color_mode_t and android_render_intent_v1_1_t in
|
|
* <system/graphics.h>. All HWC2 devices must support at least
|
|
* HAL_COLOR_MODE_NATIVE and HAL_RENDER_INTENT_COLORIMETRIC, and displays are
|
|
* assumed to be in this mode and intent upon hotplug.
|
|
*
|
|
* Parameters:
|
|
* mode - the mode to set
|
|
* intent - the intent to set
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
* HWC2_ERROR_BAD_PARAMETER - mode/intent is not a valid color mode or
|
|
* render intent
|
|
* HWC2_ERROR_UNSUPPORTED - mode or intent is not supported on this display
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_SET_COLOR_MODE_WITH_RENDER_INTENT)(
|
|
hwc2_device_t* device, hwc2_display_t display,
|
|
int32_t /*android_color_mode_t*/ mode,
|
|
int32_t /*android_render_intent_v1_1_t */ intent);
|
|
|
|
/* setColorTransform(..., matrix, hint)
|
|
* Descriptor: HWC2_FUNCTION_SET_COLOR_TRANSFORM
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Sets a color transform which will be applied after composition.
|
|
*
|
|
* If hint is not HAL_COLOR_TRANSFORM_ARBITRARY, then the device may use the
|
|
* hint to apply the desired color transform instead of using the color matrix
|
|
* directly.
|
|
*
|
|
* If the device is not capable of either using the hint or the matrix to apply
|
|
* the desired color transform, it should force all layers to client composition
|
|
* during validateDisplay.
|
|
*
|
|
* If HWC2_CAPABILITY_SKIP_CLIENT_COLOR_TRANSFORM is present, then the client
|
|
* will never apply the color transform during client composition, even if all
|
|
* layers are being composed by the client.
|
|
*
|
|
* The matrix provided is an affine color transformation of the following form:
|
|
*
|
|
* |r.r r.g r.b 0|
|
|
* |g.r g.g g.b 0|
|
|
* |b.r b.g b.b 0|
|
|
* |Tr Tg Tb 1|
|
|
*
|
|
* This matrix will be provided in row-major form: {r.r, r.g, r.b, 0, g.r, ...}.
|
|
*
|
|
* Given a matrix of this form and an input color [R_in, G_in, B_in], the output
|
|
* color [R_out, G_out, B_out] will be:
|
|
*
|
|
* R_out = R_in * r.r + G_in * g.r + B_in * b.r + Tr
|
|
* G_out = R_in * r.g + G_in * g.g + B_in * b.g + Tg
|
|
* B_out = R_in * r.b + G_in * g.b + B_in * b.b + Tb
|
|
*
|
|
* Parameters:
|
|
* matrix - a 4x4 transform matrix (16 floats) as described above
|
|
* hint - a hint value which may be used instead of the given matrix unless it
|
|
* is HAL_COLOR_TRANSFORM_ARBITRARY
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
* HWC2_ERROR_BAD_PARAMETER - hint is not a valid color transform hint
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_SET_COLOR_TRANSFORM)(
|
|
hwc2_device_t* device, hwc2_display_t display, const float* matrix,
|
|
int32_t /*android_color_transform_t*/ hint);
|
|
|
|
/* getPerFrameMetadataKeys(..., outKeys)
|
|
* Descriptor: HWC2_FUNCTION_GET_PER_FRAME_METADATA_KEYS
|
|
* Optional for HWC2 devices
|
|
*
|
|
* If supported (getFunction(HWC2_FUNCTION_GET_PER_FRAME_METADATA_KEYS) is non-null),
|
|
* getPerFrameMetadataKeys returns the list of supported PerFrameMetadataKeys
|
|
* which are invariant with regard to the active configuration.
|
|
*
|
|
* Devices which are not HDR-capable, must return null when getFunction is called
|
|
* with HWC2_FUNCTION_GET_PER_FRAME_METADATA_KEYS.
|
|
*
|
|
* If outKeys is NULL, the required number of PerFrameMetadataKey keys
|
|
* must be returned in outNumKeys.
|
|
*
|
|
* Parameters:
|
|
* outNumKeys - if outKeys is NULL, the number of keys which would have
|
|
* been returned; if outKeys is not NULL, the number of keys stored in
|
|
* outKeys, which must not exceed the value stored in outNumKeys prior
|
|
* to the call; pointer will be non-NULL
|
|
* outKeys - an array of hwc2_per_frame_metadata_key_t keys
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_GET_PER_FRAME_METADATA_KEYS)(
|
|
hwc2_device_t* device, hwc2_display_t display, uint32_t* outNumKeys,
|
|
int32_t* /*hwc2_per_frame_metadata_key_t*/ outKeys);
|
|
|
|
/* setOutputBuffer(..., buffer, releaseFence)
|
|
* Descriptor: HWC2_FUNCTION_SET_OUTPUT_BUFFER
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Sets the output buffer for a virtual display. That is, the buffer to which
|
|
* the composition result will be written.
|
|
*
|
|
* Also provides a file descriptor referring to a release sync fence object,
|
|
* which will be signaled when it is safe to write to the output buffer. If it
|
|
* is already safe to write to the output buffer, -1 may be passed instead. The
|
|
* device must ensure that it is safe for the client to close this file
|
|
* descriptor at any point after this function is called.
|
|
*
|
|
* Must be called at least once before presentDisplay, but does not have any
|
|
* interaction with layer state or display validation.
|
|
*
|
|
* Parameters:
|
|
* buffer - the new output buffer
|
|
* releaseFence - a sync fence file descriptor as described above
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
* HWC2_ERROR_BAD_PARAMETER - the new output buffer handle was invalid
|
|
* HWC2_ERROR_UNSUPPORTED - display does not refer to a virtual display
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_SET_OUTPUT_BUFFER)(
|
|
hwc2_device_t* device, hwc2_display_t display, buffer_handle_t buffer,
|
|
int32_t releaseFence);
|
|
|
|
/* setPowerMode(..., mode)
|
|
* Descriptor: HWC2_FUNCTION_SET_POWER_MODE
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Sets the power mode of the given display. The transition must be complete
|
|
* when this function returns. It is valid to call this function multiple times
|
|
* with the same power mode.
|
|
*
|
|
* All displays must support HWC2_POWER_MODE_ON and HWC2_POWER_MODE_OFF. Whether
|
|
* a display supports HWC2_POWER_MODE_DOZE or HWC2_POWER_MODE_DOZE_SUSPEND may
|
|
* be queried using getDozeSupport.
|
|
*
|
|
* Parameters:
|
|
* mode - the new power mode
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
* HWC2_ERROR_BAD_PARAMETER - mode was not a valid power mode
|
|
* HWC2_ERROR_UNSUPPORTED - mode was a valid power mode, but is not supported
|
|
* on this display
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_SET_POWER_MODE)(
|
|
hwc2_device_t* device, hwc2_display_t display,
|
|
int32_t /*hwc2_power_mode_t*/ mode);
|
|
|
|
/* getReadbackBufferAttributes(..., outFormat, outDataspace)
|
|
* Optional for HWC2 devices
|
|
*
|
|
* Returns the format which should be used when allocating a buffer for use by
|
|
* device readback as well as the dataspace in which its contents should be
|
|
* interpreted.
|
|
*
|
|
* If readback is not supported by this HWC implementation, this call will also
|
|
* be able to return HWC2_ERROR_UNSUPPORTED so we can fall back to another method.
|
|
* Returning NULL to a getFunction request for this function will also indicate
|
|
* that readback is not supported.
|
|
*
|
|
* The width and height of this buffer will be those of the currently-active
|
|
* display configuration, and the usage flags will consist of the following:
|
|
* BufferUsage::CPU_READ | BufferUsage::GPU_TEXTURE |
|
|
* BufferUsage::COMPOSER_OUTPUT
|
|
*
|
|
* The format and dataspace provided must be sufficient such that if a
|
|
* correctly-configured buffer is passed into setReadbackBuffer, filled by
|
|
* the device, and then displayed by the client as a full-screen buffer, the
|
|
* output of the display remains the same (subject to the note about protected
|
|
* content in the description of setReadbackBuffer).
|
|
*
|
|
* If the active configuration or color mode of this display has changed since
|
|
* the previous call to this function, it will be called again prior to setting
|
|
* a readback buffer such that the returned format and dataspace can be updated
|
|
* accordingly.
|
|
*
|
|
* Parameters:
|
|
* outFormat - the format the client should use when allocating a device
|
|
* readback buffer; pointer will be non-NULL
|
|
* outDataspace - the dataspace the client will use when interpreting the
|
|
* contents of a device readback buffer; pointer will be non-NULL
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
*
|
|
* See also:
|
|
* setReadbackBuffer
|
|
* getReadbackBufferFence
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_GET_READBACK_BUFFER_ATTRIBUTES)(
|
|
hwc2_device_t* device, hwc2_display_t display,
|
|
int32_t* /*android_pixel_format_t*/ outFormat,
|
|
int32_t* /*android_dataspace_t*/ outDataspace);
|
|
|
|
/* getReadbackBufferFence(..., outFence)
|
|
* Optional for HWC2 devices
|
|
*
|
|
* Returns an acquire sync fence file descriptor which will signal when the
|
|
* buffer provided to setReadbackBuffer has been filled by the device and is
|
|
* safe for the client to read.
|
|
*
|
|
* If it is already safe to read from this buffer, -1 may be returned instead.
|
|
* The client takes ownership of this file descriptor and is responsible for
|
|
* closing it when it is no longer needed.
|
|
*
|
|
* This function will be called immediately after the composition cycle being
|
|
* captured into the readback buffer. The complete ordering of a readback buffer
|
|
* capture is as follows:
|
|
*
|
|
* getReadbackBufferAttributes
|
|
* // Readback buffer is allocated
|
|
* // Many frames may pass
|
|
*
|
|
* setReadbackBuffer
|
|
* validateDisplay
|
|
* presentDisplay
|
|
* getReadbackBufferFence
|
|
* // Implicitly wait on the acquire fence before accessing the buffer
|
|
*
|
|
* Parameters:
|
|
* outFence - a sync fence file descriptor as described above; pointer
|
|
* will be non-NULL
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
* HWC2_ERROR_NO_RESOURCES - the readback operation was successful, but
|
|
* resulted in a different validate result than would have occurred
|
|
* without readback
|
|
* HWC2_ERROR_UNSUPPORTED - the readback operation was unsuccessful because
|
|
* of resource constraints, the presence of protected content, or other
|
|
* reasons; -1 must be returned in outFence
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_GET_READBACK_BUFFER_FENCE)(
|
|
hwc2_device_t* device, hwc2_display_t display,
|
|
int32_t* outFence);
|
|
|
|
/* setReadbackBuffer(..., buffer, releaseFence)
|
|
* Optional for HWC2 devices
|
|
*
|
|
* Sets the readback buffer to be filled with the contents of the next
|
|
* composition performed for this display (i.e., the contents present at the
|
|
* time of the next validateDisplay/presentDisplay cycle).
|
|
*
|
|
* This buffer will have been allocated as described in
|
|
* getReadbackBufferAttributes and will be interpreted as being in the dataspace
|
|
* provided by the same.
|
|
*
|
|
* If there is hardware protected content on the display at the time of the next
|
|
* composition, the area of the readback buffer covered by such content must be
|
|
* completely black. Any areas of the buffer not covered by such content may
|
|
* optionally be black as well.
|
|
*
|
|
* The release fence file descriptor provided works identically to the one
|
|
* described for setOutputBuffer.
|
|
*
|
|
* This function will not be called between any call to validateDisplay and a
|
|
* subsequent call to presentDisplay.
|
|
*
|
|
* Parameters:
|
|
* buffer - the new readback buffer
|
|
* releaseFence - a sync fence file descriptor as described in setOutputBuffer
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
* HWC2_ERROR_BAD_PARAMETER - the new readback buffer handle was invalid
|
|
*
|
|
* See also:
|
|
* getReadbackBufferAttributes
|
|
* getReadbackBufferFence
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_SET_READBACK_BUFFER)(
|
|
hwc2_device_t* device, hwc2_display_t display,
|
|
buffer_handle_t buffer, int32_t releaseFence);
|
|
|
|
/* setVsyncEnabled(..., enabled)
|
|
* Descriptor: HWC2_FUNCTION_SET_VSYNC_ENABLED
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Enables or disables the vsync signal for the given display. Virtual displays
|
|
* never generate vsync callbacks, and any attempt to enable vsync for a virtual
|
|
* display though this function must return HWC2_ERROR_NONE and have no other
|
|
* effect.
|
|
*
|
|
* Parameters:
|
|
* enabled - whether to enable or disable vsync
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
* HWC2_ERROR_BAD_PARAMETER - enabled was an invalid value
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_SET_VSYNC_ENABLED)(
|
|
hwc2_device_t* device, hwc2_display_t display,
|
|
int32_t /*hwc2_vsync_t*/ enabled);
|
|
|
|
/* validateDisplay(..., outNumTypes, outNumRequests)
|
|
* Descriptor: HWC2_FUNCTION_VALIDATE_DISPLAY
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Instructs the device to inspect all of the layer state and determine if
|
|
* there are any composition type changes necessary before presenting the
|
|
* display. Permitted changes are described in the definition of
|
|
* hwc2_composition_t above.
|
|
*
|
|
* Also returns the number of layer requests required
|
|
* by the given layer configuration.
|
|
*
|
|
* Parameters:
|
|
* outNumTypes - the number of composition type changes required by the
|
|
* device; if greater than 0, the client must either set and validate new
|
|
* types, or call acceptDisplayChanges to accept the changes returned by
|
|
* getChangedCompositionTypes; must be the same as the number of changes
|
|
* returned by getChangedCompositionTypes (see the declaration of that
|
|
* function for more information); pointer will be non-NULL
|
|
* outNumRequests - the number of layer requests required by this layer
|
|
* configuration; must be equal to the number of layer requests returned
|
|
* by getDisplayRequests (see the declaration of that function for
|
|
* more information); pointer will be non-NULL
|
|
*
|
|
* Returns HWC2_ERROR_NONE if no changes are necessary and it is safe to present
|
|
* the display using the current layer state. Otherwise returns one of the
|
|
* following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
* HWC2_ERROR_HAS_CHANGES - outNumTypes was greater than 0 (see parameter list
|
|
* for more information)
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_VALIDATE_DISPLAY)(
|
|
hwc2_device_t* device, hwc2_display_t display,
|
|
uint32_t* outNumTypes, uint32_t* outNumRequests);
|
|
|
|
/*
|
|
* Layer Functions
|
|
*
|
|
* These are functions which operate on layers, but which do not modify state
|
|
* that must be validated before use. See also 'Layer State Functions' below.
|
|
*
|
|
* All of these functions take as their first three parameters a device pointer,
|
|
* a display handle for the display which contains the layer, and a layer
|
|
* handle, so these parameters are omitted from the described parameter lists.
|
|
*/
|
|
|
|
/* setCursorPosition(..., x, y)
|
|
* Descriptor: HWC2_FUNCTION_SET_CURSOR_POSITION
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Asynchonously sets the position of a cursor layer.
|
|
*
|
|
* Prior to validateDisplay, a layer may be marked as HWC2_COMPOSITION_CURSOR.
|
|
* If validation succeeds (i.e., the device does not request a composition
|
|
* change for that layer), then once a buffer has been set for the layer and it
|
|
* has been presented, its position may be set by this function at any time
|
|
* between presentDisplay and any subsequent validateDisplay calls for this
|
|
* display.
|
|
*
|
|
* Once validateDisplay is called, this function will not be called again until
|
|
* the validate/present sequence is completed.
|
|
*
|
|
* May be called from any thread so long as it is not interleaved with the
|
|
* validate/present sequence as described above.
|
|
*
|
|
* Parameters:
|
|
* x - the new x coordinate (in pixels from the left of the screen)
|
|
* y - the new y coordinate (in pixels from the top of the screen)
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
* HWC2_ERROR_BAD_LAYER - the layer is invalid or is not currently marked as
|
|
* HWC2_COMPOSITION_CURSOR
|
|
* HWC2_ERROR_NOT_VALIDATED - the device is currently in the middle of the
|
|
* validate/present sequence
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_SET_CURSOR_POSITION)(
|
|
hwc2_device_t* device, hwc2_display_t display, hwc2_layer_t layer,
|
|
int32_t x, int32_t y);
|
|
|
|
/* setLayerBuffer(..., buffer, acquireFence)
|
|
* Descriptor: HWC2_FUNCTION_SET_LAYER_BUFFER
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Sets the buffer handle to be displayed for this layer. If the buffer
|
|
* properties set at allocation time (width, height, format, and usage) have not
|
|
* changed since the previous frame, it is not necessary to call validateDisplay
|
|
* before calling presentDisplay unless new state needs to be validated in the
|
|
* interim.
|
|
*
|
|
* Also provides a file descriptor referring to an acquire sync fence object,
|
|
* which will be signaled when it is safe to read from the given buffer. If it
|
|
* is already safe to read from the buffer, -1 may be passed instead. The
|
|
* device must ensure that it is safe for the client to close this file
|
|
* descriptor at any point after this function is called.
|
|
*
|
|
* This function must return HWC2_ERROR_NONE and have no other effect if called
|
|
* for a layer with a composition type of HWC2_COMPOSITION_SOLID_COLOR (because
|
|
* it has no buffer) or HWC2_COMPOSITION_SIDEBAND or HWC2_COMPOSITION_CLIENT
|
|
* (because synchronization and buffer updates for these layers are handled
|
|
* elsewhere).
|
|
*
|
|
* Parameters:
|
|
* buffer - the buffer handle to set
|
|
* acquireFence - a sync fence file descriptor as described above
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_LAYER - an invalid layer handle was passed in
|
|
* HWC2_ERROR_BAD_PARAMETER - the buffer handle passed in was invalid
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_SET_LAYER_BUFFER)(
|
|
hwc2_device_t* device, hwc2_display_t display, hwc2_layer_t layer,
|
|
buffer_handle_t buffer, int32_t acquireFence);
|
|
|
|
/* setLayerSurfaceDamage(..., damage)
|
|
* Descriptor: HWC2_FUNCTION_SET_LAYER_SURFACE_DAMAGE
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Provides the region of the source buffer which has been modified since the
|
|
* last frame. This region does not need to be validated before calling
|
|
* presentDisplay.
|
|
*
|
|
* Once set through this function, the damage region remains the same until a
|
|
* subsequent call to this function.
|
|
*
|
|
* If damage.numRects > 0, then it may be assumed that any portion of the source
|
|
* buffer not covered by one of the rects has not been modified this frame. If
|
|
* damage.numRects == 0, then the whole source buffer must be treated as if it
|
|
* has been modified.
|
|
*
|
|
* If the layer's contents are not modified relative to the prior frame, damage
|
|
* will contain exactly one empty rect([0, 0, 0, 0]).
|
|
*
|
|
* The damage rects are relative to the pre-transformed buffer, and their origin
|
|
* is the top-left corner. They will not exceed the dimensions of the latched
|
|
* buffer.
|
|
*
|
|
* Parameters:
|
|
* damage - the new surface damage region
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_LAYER - an invalid layer handle was passed in
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_SET_LAYER_SURFACE_DAMAGE)(
|
|
hwc2_device_t* device, hwc2_display_t display, hwc2_layer_t layer,
|
|
hwc_region_t damage);
|
|
|
|
/* setLayerPerFrameMetadata(..., numMetadata, metadata)
|
|
* Descriptor: HWC2_FUNCTION_SET_LAYER_PER_FRAME_METADATA
|
|
* Optional for HWC2 devices
|
|
*
|
|
* If supported (getFunction(HWC2_FUNCTION_SET_LAYER_PER_FRAME_METADATA) is
|
|
* non-null), sets the metadata for the given display for all following
|
|
* frames.
|
|
*
|
|
* Upon returning from this function, the metadata change must have
|
|
* fully taken effect.
|
|
*
|
|
* This function will only be called if getPerFrameMetadataKeys is non-NULL
|
|
* and returns at least one key.
|
|
*
|
|
* Parameters:
|
|
* numElements is the number of elements in each of the keys and metadata arrays
|
|
* keys is a pointer to the array of keys.
|
|
* outMetadata is a pointer to the corresponding array of metadata.
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
* HWC2_ERROR_BAD_PARAMETER - metadata is not valid
|
|
* HWC2_ERROR_UNSUPPORTED - metadata is not supported on this display
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_SET_LAYER_PER_FRAME_METADATA)(
|
|
hwc2_device_t* device, hwc2_display_t display, hwc2_layer_t layer,
|
|
uint32_t numElements, const int32_t* /*hw2_per_frame_metadata_key_t*/ keys,
|
|
const float* metadata);
|
|
|
|
/* setLayerPerFrameMetadataBlobs(...,numElements, keys, sizes, blobs)
|
|
* Descriptor: HWC2_FUNCTION_SET_LAYER_PER_FRAME_METADATA_BLOBS
|
|
* Optional for HWC2 devices
|
|
*
|
|
* If supported, (getFunction(HWC2_FUNCTION_SET_LAYER_PER_FRAME_METADATA_BLOBS)
|
|
* is non-null), sets the metadata for the given display and layer.
|
|
*
|
|
* Upon returning from this function, the metadata change must have fully taken
|
|
* effect.
|
|
*
|
|
* This function must only be called if getPerFrameMetadataKeys is non-NULL
|
|
* and returns at least one key that corresponds to a blob type.
|
|
*
|
|
* Current valid blob type keys are: HDR10_PLUS_SEI
|
|
*
|
|
* Parameters:
|
|
* numElements is the number of elements in each of the keys, sizes, and
|
|
* metadata arrays
|
|
* keys is a pointer to an array of keys. Current valid keys are those listed
|
|
* above as valid blob type keys.
|
|
* sizes is a pointer to an array of unsigned ints specifying the sizes of
|
|
* each metadata blob
|
|
* metadata is a pointer to a blob of data holding all blobs contiguously in
|
|
* memory
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following erros:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
* HWC2_ERROR_BAD_PARAMETER - sizes of keys and metadata parameters does
|
|
* not match numElements, numElements < 0, or keys contains a
|
|
* non-valid key (see above for current valid blob type keys).
|
|
* HWC2_ERROR_UNSUPPORTED - metadata is not supported on this display
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_SET_LAYER_PER_FRAME_METADATA_BLOBS)(
|
|
hwc2_device_t* device, hwc2_display_t display, hwc2_layer_t layer,
|
|
uint32_t numElements, const int32_t* keys, const uint32_t* sizes,
|
|
const uint8_t* metadata);
|
|
/*
|
|
* Layer State Functions
|
|
*
|
|
* These functions modify the state of a given layer. They do not take effect
|
|
* until the display configuration is successfully validated with
|
|
* validateDisplay and the display contents are presented with presentDisplay.
|
|
*
|
|
* All of these functions take as their first three parameters a device pointer,
|
|
* a display handle for the display which contains the layer, and a layer
|
|
* handle, so these parameters are omitted from the described parameter lists.
|
|
*/
|
|
|
|
/* setLayerBlendMode(..., mode)
|
|
* Descriptor: HWC2_FUNCTION_SET_LAYER_BLEND_MODE
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Sets the blend mode of the given layer.
|
|
*
|
|
* Parameters:
|
|
* mode - the new blend mode
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_LAYER - an invalid layer handle was passed in
|
|
* HWC2_ERROR_BAD_PARAMETER - an invalid blend mode was passed in
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_SET_LAYER_BLEND_MODE)(
|
|
hwc2_device_t* device, hwc2_display_t display, hwc2_layer_t layer,
|
|
int32_t /*hwc2_blend_mode_t*/ mode);
|
|
|
|
/* setLayerColor(..., color)
|
|
* Descriptor: HWC2_FUNCTION_SET_LAYER_COLOR
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Sets the color of the given layer. If the composition type of the layer is
|
|
* not HWC2_COMPOSITION_SOLID_COLOR, this call must return HWC2_ERROR_NONE and
|
|
* have no other effect.
|
|
*
|
|
* Parameters:
|
|
* color - the new color
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_LAYER - an invalid layer handle was passed in
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_SET_LAYER_COLOR)(
|
|
hwc2_device_t* device, hwc2_display_t display, hwc2_layer_t layer,
|
|
hwc_color_t color);
|
|
|
|
/* setLayerFloatColor(..., color)
|
|
* Descriptor: HWC2_FUNCTION_SET_LAYER_FLOAT_COLOR
|
|
* Provided by HWC2 devices which don't return nullptr function pointer.
|
|
*
|
|
* Sets the color of the given layer. If the composition type of the layer is
|
|
* not HWC2_COMPOSITION_SOLID_COLOR, this call must return HWC2_ERROR_NONE and
|
|
* have no other effect.
|
|
*
|
|
* Parameters:
|
|
* color - the new color in float type, rage is [0.0, 1.0], the colorspace is
|
|
* defined by the dataspace that gets set by calling setLayerDataspace.
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_LAYER - an invalid layer handle was passed in
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_SET_LAYER_FLOAT_COLOR)(
|
|
hwc2_device_t* device, hwc2_display_t display, hwc2_layer_t layer,
|
|
hwc_float_color_t color);
|
|
|
|
/* setLayerCompositionType(..., type)
|
|
* Descriptor: HWC2_FUNCTION_SET_LAYER_COMPOSITION_TYPE
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Sets the desired composition type of the given layer. During validateDisplay,
|
|
* the device may request changes to the composition types of any of the layers
|
|
* as described in the definition of hwc2_composition_t above.
|
|
*
|
|
* Parameters:
|
|
* type - the new composition type
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_LAYER - an invalid layer handle was passed in
|
|
* HWC2_ERROR_BAD_PARAMETER - an invalid composition type was passed in
|
|
* HWC2_ERROR_UNSUPPORTED - a valid composition type was passed in, but it is
|
|
* not supported by this device
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_SET_LAYER_COMPOSITION_TYPE)(
|
|
hwc2_device_t* device, hwc2_display_t display, hwc2_layer_t layer,
|
|
int32_t /*hwc2_composition_t*/ type);
|
|
|
|
/* setLayerDataspace(..., dataspace)
|
|
* Descriptor: HWC2_FUNCTION_SET_LAYER_DATASPACE
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Sets the dataspace that the current buffer on this layer is in.
|
|
*
|
|
* The dataspace provides more information about how to interpret the buffer
|
|
* contents, such as the encoding standard and color transform.
|
|
*
|
|
* See the values of android_dataspace_t in <system/graphics.h> for more
|
|
* information.
|
|
*
|
|
* Parameters:
|
|
* dataspace - the new dataspace
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_LAYER - an invalid layer handle was passed in
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_SET_LAYER_DATASPACE)(
|
|
hwc2_device_t* device, hwc2_display_t display, hwc2_layer_t layer,
|
|
int32_t /*android_dataspace_t*/ dataspace);
|
|
|
|
/* setLayerDisplayFrame(..., frame)
|
|
* Descriptor: HWC2_FUNCTION_SET_LAYER_DISPLAY_FRAME
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Sets the display frame (the portion of the display covered by a layer) of the
|
|
* given layer. This frame will not exceed the display dimensions.
|
|
*
|
|
* Parameters:
|
|
* frame - the new display frame
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_LAYER - an invalid layer handle was passed in
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_SET_LAYER_DISPLAY_FRAME)(
|
|
hwc2_device_t* device, hwc2_display_t display, hwc2_layer_t layer,
|
|
hwc_rect_t frame);
|
|
|
|
/* setLayerPlaneAlpha(..., alpha)
|
|
* Descriptor: HWC2_FUNCTION_SET_LAYER_PLANE_ALPHA
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Sets an alpha value (a floating point value in the range [0.0, 1.0]) which
|
|
* will be applied to the whole layer. It can be conceptualized as a
|
|
* preprocessing step which applies the following function:
|
|
* if (blendMode == HWC2_BLEND_MODE_PREMULTIPLIED)
|
|
* out.rgb = in.rgb * planeAlpha
|
|
* out.a = in.a * planeAlpha
|
|
*
|
|
* If the device does not support this operation on a layer which is marked
|
|
* HWC2_COMPOSITION_DEVICE, it must request a composition type change to
|
|
* HWC2_COMPOSITION_CLIENT upon the next validateDisplay call.
|
|
*
|
|
* Parameters:
|
|
* alpha - the plane alpha value to apply
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_LAYER - an invalid layer handle was passed in
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_SET_LAYER_PLANE_ALPHA)(
|
|
hwc2_device_t* device, hwc2_display_t display, hwc2_layer_t layer,
|
|
float alpha);
|
|
|
|
/* setLayerSidebandStream(..., stream)
|
|
* Descriptor: HWC2_FUNCTION_SET_LAYER_SIDEBAND_STREAM
|
|
* Provided by HWC2 devices which support HWC2_CAPABILITY_SIDEBAND_STREAM
|
|
*
|
|
* Sets the sideband stream for this layer. If the composition type of the given
|
|
* layer is not HWC2_COMPOSITION_SIDEBAND, this call must return HWC2_ERROR_NONE
|
|
* and have no other effect.
|
|
*
|
|
* Parameters:
|
|
* stream - the new sideband stream
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_LAYER - an invalid layer handle was passed in
|
|
* HWC2_ERROR_BAD_PARAMETER - an invalid sideband stream was passed in
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_SET_LAYER_SIDEBAND_STREAM)(
|
|
hwc2_device_t* device, hwc2_display_t display, hwc2_layer_t layer,
|
|
const native_handle_t* stream);
|
|
|
|
/* setLayerSourceCrop(..., crop)
|
|
* Descriptor: HWC2_FUNCTION_SET_LAYER_SOURCE_CROP
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Sets the source crop (the portion of the source buffer which will fill the
|
|
* display frame) of the given layer. This crop rectangle will not exceed the
|
|
* dimensions of the latched buffer.
|
|
*
|
|
* If the device is not capable of supporting a true float source crop (i.e., it
|
|
* will truncate or round the floats to integers), it should set this layer to
|
|
* HWC2_COMPOSITION_CLIENT when crop is non-integral for the most accurate
|
|
* rendering.
|
|
*
|
|
* If the device cannot support float source crops, but still wants to handle
|
|
* the layer, it should use the following code (or similar) to convert to
|
|
* an integer crop:
|
|
* intCrop.left = (int) ceilf(crop.left);
|
|
* intCrop.top = (int) ceilf(crop.top);
|
|
* intCrop.right = (int) floorf(crop.right);
|
|
* intCrop.bottom = (int) floorf(crop.bottom);
|
|
*
|
|
* Parameters:
|
|
* crop - the new source crop
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_LAYER - an invalid layer handle was passed in
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_SET_LAYER_SOURCE_CROP)(
|
|
hwc2_device_t* device, hwc2_display_t display, hwc2_layer_t layer,
|
|
hwc_frect_t crop);
|
|
|
|
/* setLayerTransform(..., transform)
|
|
* Descriptor: HWC2_FUNCTION_SET_LAYER_TRANSFORM
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Sets the transform (rotation/flip) of the given layer.
|
|
*
|
|
* Parameters:
|
|
* transform - the new transform
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_LAYER - an invalid layer handle was passed in
|
|
* HWC2_ERROR_BAD_PARAMETER - an invalid transform was passed in
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_SET_LAYER_TRANSFORM)(
|
|
hwc2_device_t* device, hwc2_display_t display, hwc2_layer_t layer,
|
|
int32_t /*hwc_transform_t*/ transform);
|
|
|
|
/* setLayerVisibleRegion(..., visible)
|
|
* Descriptor: HWC2_FUNCTION_SET_LAYER_VISIBLE_REGION
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Specifies the portion of the layer that is visible, including portions under
|
|
* translucent areas of other layers. The region is in screen space, and will
|
|
* not exceed the dimensions of the screen.
|
|
*
|
|
* Parameters:
|
|
* visible - the new visible region, in screen space
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_LAYER - an invalid layer handle was passed in
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_SET_LAYER_VISIBLE_REGION)(
|
|
hwc2_device_t* device, hwc2_display_t display, hwc2_layer_t layer,
|
|
hwc_region_t visible);
|
|
|
|
/* setLayerZOrder(..., z)
|
|
* Descriptor: HWC2_FUNCTION_SET_LAYER_Z_ORDER
|
|
* Must be provided by all HWC2 devices
|
|
*
|
|
* Sets the desired Z order (height) of the given layer. A layer with a greater
|
|
* Z value occludes a layer with a lesser Z value.
|
|
*
|
|
* Parameters:
|
|
* z - the new Z order
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_LAYER - an invalid layer handle was passed in
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_SET_LAYER_Z_ORDER)(
|
|
hwc2_device_t* device, hwc2_display_t display, hwc2_layer_t layer,
|
|
uint32_t z);
|
|
|
|
/* setLayerColorTransform(..., matrix)
|
|
* Descriptor: HWC2_FUNCTION_SET_LAYER_COLOR_TRANSFORM
|
|
* Optional by all HWC2 devices
|
|
*
|
|
* Sets a matrix for color transform which will be applied on this layer
|
|
* before composition.
|
|
*
|
|
* If the device is not capable of apply the matrix on this layer, it must force
|
|
* this layer to client composition during VALIDATE_DISPLAY.
|
|
*
|
|
* The matrix provided is an affine color transformation of the following form:
|
|
*
|
|
* |r.r r.g r.b 0|
|
|
* |g.r g.g g.b 0|
|
|
* |b.r b.g b.b 0|
|
|
* |Tr Tg Tb 1|
|
|
*
|
|
* This matrix must be provided in row-major form:
|
|
*
|
|
* {r.r, r.g, r.b, 0, g.r, ...}.
|
|
*
|
|
* Given a matrix of this form and an input color [R_in, G_in, B_in],
|
|
* the input color must first be converted to linear space
|
|
* [R_linear, G_linear, B_linear], then the output linear color
|
|
* [R_out_linear, G_out_linear, B_out_linear] will be:
|
|
*
|
|
* R_out_linear = R_linear * r.r + G_linear * g.r + B_linear * b.r + Tr
|
|
* G_out_linear = R_linear * r.g + G_linear * g.g + B_linear * b.g + Tg
|
|
* B_out_linear = R_linear * r.b + G_linear * g.b + B_linear * b.b + Tb
|
|
*
|
|
* [R_out_linear, G_out_linear, B_out_linear] must then be converted to
|
|
* gamma space: [R_out, G_out, B_out] before blending.
|
|
*
|
|
* Parameters:
|
|
* matrix - a 4x4 transform matrix (16 floats) as described above
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
* HWC2_ERROR_BAD_LAYER - an invalid layer handle was passed in
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_SET_LAYER_COLOR_TRANSFORM)(
|
|
hwc2_device_t* device, hwc2_display_t display, hwc2_layer_t layer,
|
|
const float* matrix);
|
|
|
|
/* getDisplayedContentSamplingAttributes(...,
|
|
* format, dataspace, supported_components, max_frames)
|
|
* Descriptor: HWC2_FUNCTION_GET_DISPLAYED_CONTENT_SAMPLING_ATTRIBUTES
|
|
* Optional by all HWC2 devices
|
|
*
|
|
* Query for what types of color sampling the hardware supports.
|
|
*
|
|
* Parameters:
|
|
* format - The format of the sampled pixels; pointer will be non-NULL
|
|
* dataspace - The dataspace of the sampled pixels; pointer will be non-NULL
|
|
* supported_components - The mask of which components can be sampled; pointer
|
|
* will be non-NULL
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY when an invalid display was passed in, or
|
|
* HWC2_ERROR_UNSUPPORTED when there is no efficient way to sample.
|
|
*/
|
|
typedef int32_t (*HWC2_PFN_GET_DISPLAYED_CONTENT_SAMPLING_ATTRIBUTES)(
|
|
hwc2_device_t* device, hwc2_display_t display,
|
|
int32_t* /* android_pixel_format_t */ format,
|
|
int32_t* /* android_dataspace_t */ dataspace,
|
|
uint8_t* /* mask of android_component_t */ supported_components);
|
|
|
|
/* setDisplayedContentSamplingEnabled(..., enabled)
|
|
* Descriptor: HWC2_FUNCTION_SET_DISPLAYED_CONTENT_SAMPLING_ENABLED
|
|
* Optional by all HWC2 devices
|
|
*
|
|
* Enables or disables the collection of color content statistics
|
|
* on this display.
|
|
*
|
|
* Sampling occurs on the contents of the final composition on this display
|
|
* (i.e., the contents presented on screen).
|
|
*
|
|
* Sampling support is optional, and is set to DISABLE by default.
|
|
* On each call to ENABLE, all collected statistics will be reset.
|
|
*
|
|
* Sample data can be queried via getDisplayedContentSample().
|
|
*
|
|
* Parameters:
|
|
* enabled - indicates whether to enable or disable sampling.
|
|
* component_mask - The mask of which components should be sampled.
|
|
* If zero, all supported components are to be enabled.
|
|
* max_frames - is the maximum number of frames that should be stored before
|
|
* discard. The sample represents the most-recently posted frames.
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY when an invalid display handle was passed in,
|
|
* HWC2_ERROR_BAD_PARAMETER when enabled was an invalid value, or
|
|
* HWC2_ERROR_NO_RESOURCES when the requested ringbuffer size via max_frames
|
|
* was not available.
|
|
* HWC2_ERROR_UNSUPPORTED when there is no efficient way to sample.
|
|
*/
|
|
typedef int32_t (*HWC2_PFN_SET_DISPLAYED_CONTENT_SAMPLING_ENABLED)(
|
|
hwc2_device_t* device, hwc2_display_t display,
|
|
int32_t /*hwc2_displayed_content_sampling_t*/ enabled,
|
|
uint8_t /* mask of android_component_t */ component_mask,
|
|
uint64_t max_frames);
|
|
|
|
/* getDisplayedContentSample(..., component, max_frames, timestamp,
|
|
* samples_size, samples, frame_count)
|
|
* Descriptor: HWC2_FUNCTION_GET_DISPLAYED_CONTENT_SAMPLE
|
|
* Optional by all HWC2 devices
|
|
*
|
|
* Collects the results of display content color sampling for display.
|
|
*
|
|
* Collection of data can occur whether the sampling is in ENABLE or
|
|
* DISABLE state.
|
|
*
|
|
* Parameters:
|
|
* max_frames - is the maximum number of frames that should be represented in
|
|
* the sample. The sample represents the most-recently posted frames.
|
|
* If max_frames is 0, all frames are to be represented by the sample.
|
|
* timestamp - is the timestamp after which any frames were posted that should
|
|
* be included in the sample. Timestamp is CLOCK_MONOTONIC.
|
|
* If timestamp is 0, do not filter from the sample by time.
|
|
* frame_count - The number of frames represented by this sample; pointer will
|
|
* be non-NULL.
|
|
* samples_size - The sizes of the color histogram representing the color
|
|
* sampling. Sample_sizes are indexed in the same order as
|
|
* HWC2_FORMAT_COMPONENT_.
|
|
* samples - The arrays of data corresponding to the sampling data. Samples are
|
|
* indexed in the same order as HWC2_FORMAT_COMPONENT_.
|
|
* The size of each sample is the samples_size for the same index.
|
|
* Each components sample is an array that is to be filled with the
|
|
* evenly-weighted buckets of a histogram counting how many times a pixel
|
|
* of the given component was displayed onscreen. Caller owns the data and
|
|
* pointer may be NULL to query samples_size.
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY when an invalid display was passed in, or
|
|
* HWC2_ERROR_UNSUPPORTED when there is no efficient way to sample, or
|
|
* HWC2_ERROR_BAD_PARAMETER when the component is not supported by the hardware.
|
|
*/
|
|
typedef int32_t (*HWC2_PFN_GET_DISPLAYED_CONTENT_SAMPLE)(
|
|
hwc2_device_t* device, hwc2_display_t display,
|
|
uint64_t max_frames, uint64_t timestamp,
|
|
uint64_t* frame_count, int32_t samples_size[4], uint64_t* samples[4]);
|
|
|
|
/* getDisplayCapabilities(..., outCapabilities)
|
|
* Descriptor: HWC2_FUNCTION_GET_DISPLAY_CAPABILITIES
|
|
* Required for HWC2 devices for composer 2.3
|
|
* Optional for HWC2 devices for composer 2.1 and 2.2
|
|
*
|
|
* getDisplayCapabilities returns a list of supported capabilities
|
|
* (as described in the definition of Capability above).
|
|
* This list must not change after initialization.
|
|
*
|
|
* Parameters:
|
|
* outNumCapabilities - if outCapabilities was nullptr, returns the number of capabilities
|
|
* if outCapabilities was not nullptr, returns the number of capabilities stored in
|
|
* outCapabilities, which must not exceed the value stored in outNumCapabilities prior
|
|
* to the call; pointer will be non-NULL
|
|
* outCapabilities - a list of supported capabilities.
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_GET_DISPLAY_CAPABILITIES)(
|
|
hwc2_device_t* device, hwc2_display_t display, uint32_t* outNumCapabilities,
|
|
uint32_t* outCapabilities);
|
|
|
|
/* Use getDisplayCapabilities instead. If brightness is supported, must return
|
|
* DisplayCapability::BRIGHTNESS as one of the display capabilities via getDisplayCapabilities.
|
|
* Only use getDisplayCapabilities as the source of truth to query brightness support.
|
|
*
|
|
* getDisplayBrightnessSupport(displayToken)
|
|
* Descriptor: HWC2_FUNCTION_GET_DISPLAY_BRIGHTNESS_SUPPORT
|
|
* Required for HWC2 devices for composer 2.3
|
|
* Optional for HWC2 devices for composer 2.1 and 2.2
|
|
*
|
|
* getDisplayBrightnessSupport returns whether brightness operations are supported on a display.
|
|
*
|
|
* Parameters:
|
|
* outSupport - whether the display supports operations.
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY when the display is invalid.
|
|
*/
|
|
typedef int32_t /*hwc_error_t*/ (*HWC2_PFN_GET_DISPLAY_BRIGHTNESS_SUPPORT)(hwc2_device_t* device,
|
|
hwc2_display_t display, bool* outSupport);
|
|
|
|
/* setDisplayBrightness(displayToken, brightnesss)
|
|
* Descriptor: HWC2_FUNCTION_SET_DISPLAY_BRIGHTNESS
|
|
* Required for HWC2 devices for composer 2.3
|
|
* Optional for HWC2 devices for composer 2.1 and 2.2
|
|
*
|
|
* setDisplayBrightness sets the brightness of a display.
|
|
*
|
|
* Parameters:
|
|
* brightness - a number between 0.0f (minimum brightness) and 1.0f (maximum brightness), or
|
|
* -1.0f to turn the backlight off.
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY when the display is invalid, or
|
|
* HWC2_ERROR_UNSUPPORTED when brightness operations are not supported, or
|
|
* HWC2_ERROR_BAD_PARAMETER when the brightness is invalid, or
|
|
* HWC2_ERROR_NO_RESOURCES when the brightness cannot be applied.
|
|
*/
|
|
typedef int32_t /*hwc_error_t*/ (*HWC2_PFN_SET_DISPLAY_BRIGHTNESS)(hwc2_device_t* device,
|
|
hwc2_display_t display, float brightness);
|
|
|
|
/* getDisplayConnectionType(..., outType)
|
|
* Descriptor: HWC2_FUNCTION_GET_DISPLAY_CONNECTION_TYPE
|
|
* Optional for all HWC2 devices
|
|
*
|
|
* Returns whether the given physical display is internal or external.
|
|
*
|
|
* Parameters:
|
|
* outType - the connection type of the display; pointer will be non-NULL
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY when the display is invalid or virtual.
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_GET_DISPLAY_CONNECTION_TYPE)(
|
|
hwc2_device_t* device, hwc2_display_t display,
|
|
uint32_t* /*hwc2_display_connection_type_t*/ outType);
|
|
|
|
/* getDisplayVsyncPeriod(..., outVsyncPeriods)
|
|
* Descriptor: HWC2_FUNCTION_GET_DISPLAY_VSYNC_PERIOD
|
|
* Required for HWC2 devices for composer 2.4
|
|
*
|
|
* Retrieves which vsync period the display is currently using.
|
|
*
|
|
* If no display configuration is currently active, this function must
|
|
* return BAD_CONFIG. If a vsync period is about to change due to a
|
|
* setActiveConfigWithConstraints call, this function must return the current vsync period
|
|
* until the change has taken place.
|
|
*
|
|
* Parameters:
|
|
* outVsyncPeriod - the current vsync period of the display.
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in
|
|
* HWC2_ERROR_BAD_CONFIG - no configuration is currently active
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_GET_DISPLAY_VSYNC_PERIOD)(
|
|
hwc2_device_t* device, hwc2_display_t display, hwc2_vsync_period_t* outVsyncPeriod);
|
|
|
|
/* setActiveConfigWithConstraints(...,
|
|
* config,
|
|
* vsyncPeriodChangeConstraints,
|
|
* outTimeline)
|
|
* Descriptor: HWC2_FUNCTION_SET_ACTIVE_CONFIG_WITH_CONSTRAINTS
|
|
* Required for HWC2 devices for composer 2.4
|
|
*
|
|
* Sets the active configuration and the refresh rate for this display.
|
|
* If the new config shares the same config group as the current config,
|
|
* only the vsync period shall change.
|
|
* Upon returning, the given display configuration, except vsync period, must be active and
|
|
* remain so until either this function is called again or the display is disconnected.
|
|
* When the display starts to refresh at the new vsync period, onVsync_2_4 callback must be
|
|
* called with the new vsync period.
|
|
*
|
|
* Parameters:
|
|
* config - the new display configuration.
|
|
* vsyncPeriodChangeConstraints - constraints required for changing vsync period:
|
|
* desiredTimeNanos - the time in CLOCK_MONOTONIC after
|
|
* which the vsync period may change
|
|
* (i.e., the vsync period must not change
|
|
* before this time).
|
|
* seamlessRequired - if true, requires that the vsync period
|
|
* change must happen seamlessly without
|
|
* a noticeable visual artifact.
|
|
* outTimeline - the timeline for the vsync period change.
|
|
*
|
|
* Returns HWC2_ERROR_NONE or one of the following errors:
|
|
* HWC2_ERROR_BAD_DISPLAY - an invalid display handle was passed in.
|
|
* HWC2_ERROR_BAD_CONFIG - an invalid configuration handle passed in.
|
|
* HWC2_ERROR_SEAMLESS_NOT_ALLOWED - when seamlessRequired was true but config provided doesn't
|
|
* share the same config group as the current config.
|
|
* HWC2_ERROR_SEAMLESS_NOT_POSSIBLE - when seamlessRequired was true but the display cannot
|
|
* achieve the vsync period change without a noticeable
|
|
* visual artifact.
|
|
*/
|
|
typedef int32_t /*hwc2_error_t*/ (*HWC2_PFN_SET_ACTIVE_CONFIG_WITH_CONSTRAINTS)(
|
|
hwc2_device_t* device, hwc2_display_t display, hwc2_config_t config,
|
|
hwc_vsync_period_change_constraints_t* vsyncPeriodChangeConstraints,
|
|
hwc_vsync_period_change_timeline_t* outTimeline);
|
|
|
|
|
|
__END_DECLS
|
|
|
|
#endif
|