platform_hardware_libhardware/include/hardware/bt_hf.h
Sunny Kapdi 6253b05364 Bluetooth: Multi HF support
This patch adds multi hf support in HAL
Adds bd_addr parameter for callbacks from stack.

Change-Id: I960bc127026d7e96dea79316e1f03b0b0915974a
2014-05-06 01:24:05 -07:00

284 lines
9.2 KiB
C

/*
* Copyright (C) 2012 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef ANDROID_INCLUDE_BT_HF_H
#define ANDROID_INCLUDE_BT_HF_H
__BEGIN_DECLS
/* AT response code - OK/Error */
typedef enum {
BTHF_AT_RESPONSE_ERROR = 0,
BTHF_AT_RESPONSE_OK
} bthf_at_response_t;
typedef enum {
BTHF_CONNECTION_STATE_DISCONNECTED = 0,
BTHF_CONNECTION_STATE_CONNECTING,
BTHF_CONNECTION_STATE_CONNECTED,
BTHF_CONNECTION_STATE_SLC_CONNECTED,
BTHF_CONNECTION_STATE_DISCONNECTING
} bthf_connection_state_t;
typedef enum {
BTHF_AUDIO_STATE_DISCONNECTED = 0,
BTHF_AUDIO_STATE_CONNECTING,
BTHF_AUDIO_STATE_CONNECTED,
BTHF_AUDIO_STATE_DISCONNECTING
} bthf_audio_state_t;
typedef enum {
BTHF_VR_STATE_STOPPED = 0,
BTHF_VR_STATE_STARTED
} bthf_vr_state_t;
typedef enum {
BTHF_VOLUME_TYPE_SPK = 0,
BTHF_VOLUME_TYPE_MIC
} bthf_volume_type_t;
/* Noise Reduction and Echo Cancellation */
typedef enum
{
BTHF_NREC_STOP,
BTHF_NREC_START
} bthf_nrec_t;
/* CHLD - Call held handling */
typedef enum
{
BTHF_CHLD_TYPE_RELEASEHELD, // Terminate all held or set UDUB("busy") to a waiting call
BTHF_CHLD_TYPE_RELEASEACTIVE_ACCEPTHELD, // Terminate all active calls and accepts a waiting/held call
BTHF_CHLD_TYPE_HOLDACTIVE_ACCEPTHELD, // Hold all active calls and accepts a waiting/held call
BTHF_CHLD_TYPE_ADDHELDTOCONF, // Add all held calls to a conference
} bthf_chld_type_t;
/** Callback for connection state change.
* state will have one of the values from BtHfConnectionState
*/
typedef void (* bthf_connection_state_callback)(bthf_connection_state_t state, bt_bdaddr_t *bd_addr);
/** Callback for audio connection state change.
* state will have one of the values from BtHfAudioState
*/
typedef void (* bthf_audio_state_callback)(bthf_audio_state_t state, bt_bdaddr_t *bd_addr);
/** Callback for VR connection state change.
* state will have one of the values from BtHfVRState
*/
typedef void (* bthf_vr_cmd_callback)(bthf_vr_state_t state, bt_bdaddr_t *bd_addr);
/** Callback for answer incoming call (ATA)
*/
typedef void (* bthf_answer_call_cmd_callback)(bt_bdaddr_t *bd_addr);
/** Callback for disconnect call (AT+CHUP)
*/
typedef void (* bthf_hangup_call_cmd_callback)(bt_bdaddr_t *bd_addr);
/** Callback for disconnect call (AT+CHUP)
* type will denote Speaker/Mic gain (BtHfVolumeControl).
*/
typedef void (* bthf_volume_cmd_callback)(bthf_volume_type_t type, int volume, bt_bdaddr_t *bd_addr);
/** Callback for dialing an outgoing call
* If number is NULL, redial
*/
typedef void (* bthf_dial_call_cmd_callback)(char *number, bt_bdaddr_t *bd_addr);
/** Callback for sending DTMF tones
* tone contains the dtmf character to be sent
*/
typedef void (* bthf_dtmf_cmd_callback)(char tone, bt_bdaddr_t *bd_addr);
/** Callback for enabling/disabling noise reduction/echo cancellation
* value will be 1 to enable, 0 to disable
*/
typedef void (* bthf_nrec_cmd_callback)(bthf_nrec_t nrec, bt_bdaddr_t *bd_addr);
/** Callback for call hold handling (AT+CHLD)
* value will contain the call hold command (0, 1, 2, 3)
*/
typedef void (* bthf_chld_cmd_callback)(bthf_chld_type_t chld, bt_bdaddr_t *bd_addr);
/** Callback for CNUM (subscriber number)
*/
typedef void (* bthf_cnum_cmd_callback)(bt_bdaddr_t *bd_addr);
/** Callback for indicators (CIND)
*/
typedef void (* bthf_cind_cmd_callback)(bt_bdaddr_t *bd_addr);
/** Callback for operator selection (COPS)
*/
typedef void (* bthf_cops_cmd_callback)(bt_bdaddr_t *bd_addr);
/** Callback for call list (AT+CLCC)
*/
typedef void (* bthf_clcc_cmd_callback) (bt_bdaddr_t *bd_addr);
/** Callback for unknown AT command recd from HF
* at_string will contain the unparsed AT string
*/
typedef void (* bthf_unknown_at_cmd_callback)(char *at_string, bt_bdaddr_t *bd_addr);
/** Callback for keypressed (HSP) event.
*/
typedef void (* bthf_key_pressed_cmd_callback)(bt_bdaddr_t *bd_addr);
/** BT-HF callback structure. */
typedef struct {
/** set to sizeof(BtHfCallbacks) */
size_t size;
bthf_connection_state_callback connection_state_cb;
bthf_audio_state_callback audio_state_cb;
bthf_vr_cmd_callback vr_cmd_cb;
bthf_answer_call_cmd_callback answer_call_cmd_cb;
bthf_hangup_call_cmd_callback hangup_call_cmd_cb;
bthf_volume_cmd_callback volume_cmd_cb;
bthf_dial_call_cmd_callback dial_call_cmd_cb;
bthf_dtmf_cmd_callback dtmf_cmd_cb;
bthf_nrec_cmd_callback nrec_cmd_cb;
bthf_chld_cmd_callback chld_cmd_cb;
bthf_cnum_cmd_callback cnum_cmd_cb;
bthf_cind_cmd_callback cind_cmd_cb;
bthf_cops_cmd_callback cops_cmd_cb;
bthf_clcc_cmd_callback clcc_cmd_cb;
bthf_unknown_at_cmd_callback unknown_at_cmd_cb;
bthf_key_pressed_cmd_callback key_pressed_cmd_cb;
} bthf_callbacks_t;
/** Network Status */
typedef enum
{
BTHF_NETWORK_STATE_NOT_AVAILABLE = 0,
BTHF_NETWORK_STATE_AVAILABLE
} bthf_network_state_t;
/** Service type */
typedef enum
{
BTHF_SERVICE_TYPE_HOME = 0,
BTHF_SERVICE_TYPE_ROAMING
} bthf_service_type_t;
typedef enum {
BTHF_CALL_STATE_ACTIVE = 0,
BTHF_CALL_STATE_HELD,
BTHF_CALL_STATE_DIALING,
BTHF_CALL_STATE_ALERTING,
BTHF_CALL_STATE_INCOMING,
BTHF_CALL_STATE_WAITING,
BTHF_CALL_STATE_IDLE
} bthf_call_state_t;
typedef enum {
BTHF_CALL_DIRECTION_OUTGOING = 0,
BTHF_CALL_DIRECTION_INCOMING
} bthf_call_direction_t;
typedef enum {
BTHF_CALL_TYPE_VOICE = 0,
BTHF_CALL_TYPE_DATA,
BTHF_CALL_TYPE_FAX
} bthf_call_mode_t;
typedef enum {
BTHF_CALL_MPTY_TYPE_SINGLE = 0,
BTHF_CALL_MPTY_TYPE_MULTI
} bthf_call_mpty_type_t;
typedef enum {
BTHF_CALL_ADDRTYPE_UNKNOWN = 0x81,
BTHF_CALL_ADDRTYPE_INTERNATIONAL = 0x91
} bthf_call_addrtype_t;
/** Represents the standard BT-HF interface. */
typedef struct {
/** set to sizeof(BtHfInterface) */
size_t size;
/**
* Register the BtHf callbacks
*/
bt_status_t (*init)( bthf_callbacks_t* callbacks, int max_hf_clients);
/** connect to headset */
bt_status_t (*connect)( bt_bdaddr_t *bd_addr );
/** dis-connect from headset */
bt_status_t (*disconnect)( bt_bdaddr_t *bd_addr );
/** create an audio connection */
bt_status_t (*connect_audio)( bt_bdaddr_t *bd_addr );
/** close the audio connection */
bt_status_t (*disconnect_audio)( bt_bdaddr_t *bd_addr );
/** start voice recognition */
bt_status_t (*start_voice_recognition)( bt_bdaddr_t *bd_addr );
/** stop voice recognition */
bt_status_t (*stop_voice_recognition)( bt_bdaddr_t *bd_addr );
/** volume control */
bt_status_t (*volume_control) (bthf_volume_type_t type, int volume, bt_bdaddr_t *bd_addr );
/** Combined device status change notification */
bt_status_t (*device_status_notification)(bthf_network_state_t ntk_state, bthf_service_type_t svc_type, int signal,
int batt_chg);
/** Response for COPS command */
bt_status_t (*cops_response)(const char *cops, bt_bdaddr_t *bd_addr );
/** Response for CIND command */
bt_status_t (*cind_response)(int svc, int num_active, int num_held, bthf_call_state_t call_setup_state,
int signal, int roam, int batt_chg, bt_bdaddr_t *bd_addr );
/** Pre-formatted AT response, typically in response to unknown AT cmd */
bt_status_t (*formatted_at_response)(const char *rsp, bt_bdaddr_t *bd_addr );
/** ok/error response
* ERROR (0)
* OK (1)
*/
bt_status_t (*at_response) (bthf_at_response_t response_code, int error_code, bt_bdaddr_t *bd_addr );
/** response for CLCC command
* Can be iteratively called for each call index
* Call index of 0 will be treated as NULL termination (Completes response)
*/
bt_status_t (*clcc_response) (int index, bthf_call_direction_t dir,
bthf_call_state_t state, bthf_call_mode_t mode,
bthf_call_mpty_type_t mpty, const char *number,
bthf_call_addrtype_t type, bt_bdaddr_t *bd_addr );
/** notify of a call state change
* Each update notifies
* 1. Number of active/held/ringing calls
* 2. call_state: This denotes the state change that triggered this msg
* This will take one of the values from BtHfCallState
* 3. number & type: valid only for incoming & waiting call
*/
bt_status_t (*phone_state_change) (int num_active, int num_held, bthf_call_state_t call_setup_state,
const char *number, bthf_call_addrtype_t type);
/** Closes the interface. */
void (*cleanup)( void );
} bthf_interface_t;
__END_DECLS
#endif /* ANDROID_INCLUDE_BT_HF_H */