In current implementation, the ether type used for offloaded
packets is always hardcoded to IPv4 in lower layers.
This commit adds support to specify ether type of offloaded
packets from user space.
Bug: 122487582
Test: Manual
Change-Id: I1ca7391bd70ecebaf0591e0eafe08b79383538c5
This commit updates the enum for wifi_sar_scenario.
Bug: 112205428
Test: Compiles (just a header file change)
Change-Id: If01d0daf5e535e8fdca6eeab115f6c409cc38c46
This commit is part of the addition of the ether_type as an argument
to the legacy hal function to send an offloaded packet.
Bug: 122487582
Test: Manual
Test: Make sure code builds properly
Change-Id: I5c56acb74f5724ac3d6199433c7632177bfc9704
P2P random MAC needs the driver to support changing MAC address.
Bug: 118904478
Test: manual test
* Enter WiFI Direct Page
* check the feature is enabled in logcat
* WifiP2pService: Supported feature: P2P MAC randomization
* check p2p0 MAC address is randomized.
Change-Id: Iadae3cf74722d29014caffe7080e0efa44a7659e
Add NDPE attribute config and enable support so that the framework
can decide the usage of it.
Bug: 113149569
Bug: 112586769
Test: (ACTS) act.py ThroughputTest:test_iperf_max_ndi_aware_only_passphrases
Test: (CTS) atest SingleDeviceTest
Change-Id: I0c93ba53fa7de3e346ab0913d04bd670a528ec4e
This commit adds the enum and prototype to enable setting of wifi
latency mode.
Bug: 34905427
Test: Unit test
Test: ./hardware/interfaces/wifi/1.3/default/tests/runtests.sh
Test: VTS test
Test: run vts -m VtsHalWifiV1_3TargetTest
Change-Id: I846fd5f41b740be9ebf2efb16be87d456b573b2a
This is used to implement readApfPacketFilterData() for legacy wifi
drivers.
Bug: 73804303
Test: builds!
Change-Id: I562911cc064efec747629628df4eab8128449b51
(cherry picked from commit f70b864ede)
This commit adds a vendor hal function to wait for the driver to be
ready. This ensures the driver is ready for operatin before framework
starts to use it
Bug: 73482286
Test: Manual test (reboot and make sure wifi comes up consistently)
Test: The reboot test has been performed more than 10 times in a row
Test: Also, tested toggling wifi off/on then rebooted, wifi starts fine
Change-Id: I31bc594525762454b0c2f491486ffe575843c858
Signed-off-by: Ahmed ElArabawy <arabawy@google.com>
This commit extends SAR by adding more scenarios to handle near
body/head cases
Bug: 65174506
Test: Manual
Change-Id: I02fe09e450b7ca4800750169f14b1ad05308b8b0
Signed-off-by: Ahmed ElArabawy <arabawy@google.com>
Add support to configure discovery beacon interval in NAN enable
and config request.
Bug: 67745737
Test: builds, integration tests passing
Change-Id: I44d1918f740b35e39d751f26a5b5e4ee9b371a84
Add qos config parameter in sdea control parameters and also
add schedule update channel as part of nan sync stats.
Change-Id: I8b56bf49dc3b0a7139a1bfd8698114f0fbf2fd16
This header does not look like it is used anymore, and compilation
succeeds without it, so it seems safe to remove.
Bug: 64223827
Test: 'mma -j4' throws no compilation errors.
Change-Id: Ic7ca90a7ba576d0ae14ee95d2d20c8ddf612754a
Modify the current tx power API to select predefined power settings
and apply the same from the BDF file.
Bug: 62437848
Test: Manual tests
Change-Id: Ia8a4c2c3ebbc055fc28cbee224ff685f97589a08
(cherry-picked from 674da97c8fbc40b9e9b7f80bb86c4f0824fa9d7a)
Provide configuration support to set sid on the subscriber side sync and
discovery beacons as part of NAN enable and config request.
(cherry-pick of commit b2c4b3825a5b1ef4713417538755b04225b2b53d)
Bug: 35195516
Test: integrated (sl4a) tests pass
Change-Id: I20548928a9ad81e8d3154eb5b982fd19add7659c
Add new parameter second ndp channel freq in the stats response
message to support the certification efforts.
Change-Id: I9011bd7d4c5f34a15fbfe871b67d255807df8347
Modify publish/subscribe/Data Initiator/Data Indication messages
to accept either PMK or Passphrase key information. Also, provide
a new parameter service name in Data Initiator request and
Data Indication response to generate PMK from passphrase and
service name for out of band requests.
Bug: 35866810
Test: TBD
Change-Id: Ibe572928e892bbd10be79dc2e09911ada348e89d
Add a constant to make the no-cipher specification explicit.
Bug: 35387576
Test: integrated (sl4a) tests pass.
Change-Id: Ia272cad70cd4bedbdbdb4d2c856167305f747a30
Left deprecated field in place since it broke
dependent projects. Dependencies cleaned-up -
remove field.
Bug: 27914592
Test: build only requirements since unused field
Change-Id: I910ffd811ddbca9b83a0190eaede2a58b36fedc8
Roaming enhancements to avoid critical sections between
firmware based network selection and framework based network
selection. Also remove blacklist_bssid changes from gscan.h
to avoid duplication.
BUG: 32883971
Test: Build.
Change-Id: I4c851e9c1969123427f2a92e729b9a5b6fd5b8d8
Merged-In: I4c851e9c1969123427f2a92e729b9a5b6fd5b8d8
By default discovery MAC address randomization is enabled
and default(maximum) interval value is 30 minutes(1800 seconds).
Nan enable and config can specify the interval value in seconds.
Value of zero disables discovery MAC address randomization.
Bug: 33386762
Test: builds
Change-Id: I5dc10db8535227575f96635604665b6f52f8d507
1) Include security params in Publish/Subscribe/Data Request/Response
Structures.
2) Include security params in MatchIndication.
Bug: 33552694
Test: builds
Change-Id: I7a3af05b17f18040b311cf861c8dc0a0bba99d7d
As part of the Power save enhancements:
1) The device level DW intervals to be configured through config API.
2) Awake DW intervals for publish and subscribe(period parameter)
can be configured using the interval values 1, 2, 4, 8, 16.
Bug: 33552536
Test: builds
Change-Id: I3177ba13c861275a5860b825d3c466e0643bcec1
Configure the Service Non Auto responder mode.
Accept all subscribes is the default firmware behavior.
If Non Auto response is configured in the Publish API,
firmware notifies the framework and expects a response
from the Publisher.
Bug: 33209958
Test: integration data-path (sl4a) tests passing
Change-Id: I78f096d0d046f3bd39421269c79b9012a3a3cc0e
The NanSRFState enum was incorrectly specifying NAN_DO_NOT_USE_SRF
as 1 which was not insync with the wifi firmware expected value
causing the case of active subscribe and solicited publish to fail.
This commit updates the enum type appropriately.
Bug: 30898004
Change-Id: I89f092964daeeb962b57ea474131bb58984a4d43
Remove obsolete pieces from libardware_legacy that were related
to QEMU (i.e. running the system image under emulation) but are
no longer used.
Note that qemu tracing isn't implemented by the emulator anymore
(and has been for a long time).
BUG=25875346
Change-Id: I2593fe9f90241af9c5076fa248c30e0d8ab5d663
Most of this code is device independent, and we're parameterizing the
parts that are not in a way which makes the logic device independent.
Bug: 29321445
Change-Id: Ice9f16d966275378d4fc5a5201eca82f2ea67c5e
Test: Compiles, can associate to an AP.
The service instance Id needs to match the handle received during
the match indication. The current match handle is 32bit,fixing
the service instance id.
The status of the transmit follow up is not
notified, enabling an indication to notify
the status of transmit in progress.
Change-Id: I91fab766d7265ef6538c003ac454291efd0ec462
1) Remove schedule update API and data structures.
2) Add Nan Data Path error codes.
3) Provide channel configuration option.
Bug: 27916896
Bug: 26562610
Change-Id: Id2fbc8af398ee312b8c0dd61388d57cf2e7efcdd
Adding a flag to indicate if the device supports tx power level stats
reporting.
While there,
1. Fix the 2 macros used to determine if a feature is supported or not.
2. Increase the number of tx levels to 256
BUG: 27969673
Change-Id: I314648cfaa7755dc48c1f790193c96254b4db691
Add a max tx level which the framework uses to limit the array and is
needed to guard against unitialized value in |num_tx_levels|.
BUG: 27227497
Change-Id: I2438bc1536c65a2c6230bfd6e1267532d9653c8b
Modify the existing radio_stat structure to add time spent in each
tranmission power level.
BUG: 27227497
Change-Id: Ifba9f22bc7a404161ae9124c787854ed3431cb8d
cherry-picked from:
https://partner-android-review.googlesource.com/#/c/543388
Given that there is an explicit enumerated value to indicate
a drop due to lack of buffers, we shouldn't recommend using
the OTHER value for out of buffers.
BUG=27352446
TEST=compile
Change-Id: Id4fdbf530ed9a99e2b9693acb649137d598abf85
For consistency with other packet_fate functions,
wifi_start_pkt_fate_monitoring() should name the first
parameter as |handle|.
BUG=27409524
TEST=compile
Change-Id: Ic6df01e7e80f79eaf5653374106ba6e6a7609e31
Initial check-in of ND offload HAL API support
BUG=27598285
Change-Id: I9f2652de2bb0e22a25fe7c0ded6d1f5e6500de6d
Signed-off-by: Jun Lim <jun.lim@broadcom.com>
