platform_system_core/adb/adb.c

951 lines
28 KiB
C
Raw Normal View History

/*
* Copyright (C) 2007 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#define TRACE_TAG TRACE_ADB
#include <stdio.h>
#include <stdlib.h>
#include <ctype.h>
#include <stdarg.h>
#include <errno.h>
#include <stddef.h>
#include <string.h>
#include <time.h>
#include <sys/time.h>
#include <stdint.h>
#include "sysdeps.h"
#include "adb.h"
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
#include "adb_auth.h"
#include "adb_listeners.h"
#include "transport.h"
#define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0]))
#if !ADB_HOST
#include <cutils/properties.h>
#include <sys/capability.h>
#include <sys/mount.h>
#endif
#if ADB_TRACE
ADB_MUTEX_DEFINE( D_lock );
#endif
int HOST = 0;
#if !ADB_HOST
const char *adb_device_banner = "device";
#endif
void fatal(const char *fmt, ...)
{
va_list ap;
va_start(ap, fmt);
fprintf(stderr, "error: ");
vfprintf(stderr, fmt, ap);
fprintf(stderr, "\n");
va_end(ap);
exit(-1);
}
void fatal_errno(const char *fmt, ...)
{
va_list ap;
va_start(ap, fmt);
fprintf(stderr, "error: %s: ", strerror(errno));
vfprintf(stderr, fmt, ap);
fprintf(stderr, "\n");
va_end(ap);
exit(-1);
}
int adb_trace_mask;
/* read a comma/space/colum/semi-column separated list of tags
* from the ADB_TRACE environment variable and build the trace
* mask from it. note that '1' and 'all' are special cases to
* enable all tracing
*/
void adb_trace_init(void)
{
const char* p = getenv("ADB_TRACE");
const char* q;
static const struct {
const char* tag;
int flag;
} tags[] = {
{ "1", 0 },
{ "all", 0 },
{ "adb", TRACE_ADB },
{ "sockets", TRACE_SOCKETS },
{ "packets", TRACE_PACKETS },
{ "rwx", TRACE_RWX },
{ "usb", TRACE_USB },
{ "sync", TRACE_SYNC },
{ "sysdeps", TRACE_SYSDEPS },
{ "transport", TRACE_TRANSPORT },
{ "jdwp", TRACE_JDWP },
{ "services", TRACE_SERVICES },
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
{ "auth", TRACE_AUTH },
{ NULL, 0 }
};
if (p == NULL)
return;
/* use a comma/column/semi-colum/space separated list */
while (*p) {
int len, tagn;
q = strpbrk(p, " ,:;");
if (q == NULL) {
q = p + strlen(p);
}
len = q - p;
for (tagn = 0; tags[tagn].tag != NULL; tagn++)
{
int taglen = strlen(tags[tagn].tag);
if (len == taglen && !memcmp(tags[tagn].tag, p, len) )
{
int flag = tags[tagn].flag;
if (flag == 0) {
adb_trace_mask = ~0;
return;
}
adb_trace_mask |= (1 << flag);
break;
}
}
p = q;
if (*p)
p++;
}
}
apacket *get_apacket(void)
{
apacket *p = malloc(sizeof(apacket));
if(p == 0) fatal("failed to allocate an apacket");
memset(p, 0, sizeof(apacket) - MAX_PAYLOAD);
return p;
}
void put_apacket(apacket *p)
{
free(p);
}
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
void handle_online(atransport *t)
{
D("adb: online\n");
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
t->online = 1;
}
void handle_offline(atransport *t)
{
D("adb: offline\n");
//Close the associated usb
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
t->online = 0;
run_transport_disconnects(t);
}
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
#if DEBUG_PACKETS
#define DUMPMAX 32
void print_packet(const char *label, apacket *p)
{
char *tag;
char *x;
unsigned count;
switch(p->msg.command){
case A_SYNC: tag = "SYNC"; break;
case A_CNXN: tag = "CNXN" ; break;
case A_OPEN: tag = "OPEN"; break;
case A_OKAY: tag = "OKAY"; break;
case A_CLSE: tag = "CLSE"; break;
case A_WRTE: tag = "WRTE"; break;
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
case A_AUTH: tag = "AUTH"; break;
default: tag = "????"; break;
}
fprintf(stderr, "%s: %s %08x %08x %04x \"",
label, tag, p->msg.arg0, p->msg.arg1, p->msg.data_length);
count = p->msg.data_length;
x = (char*) p->data;
if(count > DUMPMAX) {
count = DUMPMAX;
tag = "\n";
} else {
tag = "\"\n";
}
while(count-- > 0){
if((*x >= ' ') && (*x < 127)) {
fputc(*x, stderr);
} else {
fputc('.', stderr);
}
x++;
}
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
fputs(tag, stderr);
}
#endif
static void send_ready(unsigned local, unsigned remote, atransport *t)
{
D("Calling send_ready \n");
apacket *p = get_apacket();
p->msg.command = A_OKAY;
p->msg.arg0 = local;
p->msg.arg1 = remote;
send_packet(p, t);
}
static void send_close(unsigned local, unsigned remote, atransport *t)
{
D("Calling send_close \n");
apacket *p = get_apacket();
p->msg.command = A_CLSE;
p->msg.arg0 = local;
p->msg.arg1 = remote;
send_packet(p, t);
}
static size_t fill_connect_data(char *buf, size_t bufsize)
{
#if ADB_HOST
return snprintf(buf, bufsize, "host::") + 1;
#else
static const char *cnxn_props[] = {
"ro.product.name",
"ro.product.model",
"ro.product.device",
};
static const int num_cnxn_props = ARRAY_SIZE(cnxn_props);
int i;
size_t remaining = bufsize;
size_t len;
len = snprintf(buf, remaining, "%s::", adb_device_banner);
remaining -= len;
buf += len;
for (i = 0; i < num_cnxn_props; i++) {
char value[PROPERTY_VALUE_MAX];
property_get(cnxn_props[i], value, "");
len = snprintf(buf, remaining, "%s=%s;", cnxn_props[i], value);
remaining -= len;
buf += len;
}
return bufsize - remaining + 1;
#endif
}
#if !ADB_HOST
static void send_msg_with_header(int fd, const char* msg, size_t msglen) {
char header[5];
if (msglen > 0xffff)
msglen = 0xffff;
snprintf(header, sizeof(header), "%04x", (unsigned)msglen);
writex(fd, header, 4);
writex(fd, msg, msglen);
}
#endif
#if ADB_HOST
static void send_msg_with_okay(int fd, const char* msg, size_t msglen) {
char header[9];
if (msglen > 0xffff)
msglen = 0xffff;
snprintf(header, sizeof(header), "OKAY%04x", (unsigned)msglen);
writex(fd, header, 8);
writex(fd, msg, msglen);
}
#endif // ADB_HOST
void send_connect(atransport *t)
{
D("Calling send_connect \n");
apacket *cp = get_apacket();
cp->msg.command = A_CNXN;
cp->msg.arg0 = A_VERSION;
cp->msg.arg1 = MAX_PAYLOAD;
cp->msg.data_length = fill_connect_data((char *)cp->data,
sizeof(cp->data));
send_packet(cp, t);
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
}
#if ADB_HOST
static char *connection_state_name(atransport *t)
{
if (t == NULL) {
return "unknown";
}
switch(t->connection_state) {
case CS_BOOTLOADER:
return "bootloader";
case CS_DEVICE:
return "device";
case CS_RECOVERY:
return "recovery";
case CS_SIDELOAD:
return "sideload";
case CS_OFFLINE:
return "offline";
case CS_UNAUTHORIZED:
return "unauthorized";
default:
return "unknown";
}
}
#endif // ADB_HOST
/* qual_overwrite is used to overwrite a qualifier string. dst is a
* pointer to a char pointer. It is assumed that if *dst is non-NULL, it
adb: Generalizing -s to take qualifiers. Prior to this change, -s could take either a serial number or a device path (e.g. "-s 01498B1F02015015" or "-s usb:1-4.2"). This change extends -s to also allow product, model or device names (e.g. "-s product:mysid"). These new qualifiers will only be available on devices that are running an adb daemon that provides properties in the connect message per Change-Id: I09200decde4facb8fc9b4056fdae910155f2bcb9 The product, model and device are derived from the ro.product.name, ro.product.model and ro.product.device properties respectively. They are prefixed with "product:", "model:" or "device:" as appropriate. In addition, any non-alphanumerics in the model are changed to underscores. If the -s parameter matches multiple devices, the result will be the same as when multiple devices are connected but no -d, -e or -s option is specified. In general, this means the user will get "error: more than one device". However for get-state, get-devpath and get-serialno, they will get "unknown". The format of "devices -l" was changed to list all of the qualifiers that are available. The following example output (with the last digits of the serial numbers replaced with X's) is with a Galaxy Prime with an older adb daemon and another Galaxy Prime and Galaxy S both with the enhanced adb daemons: List of devices attached 016B75D60A0060XX device usb:2-5 product:mysid model:Galaxy_Nexus device:toro 3731B535FAC200XX device usb:1-4.2 product:soju model:Nexus_S device:crespo 01498B1F020150XX device usb:1-4.1 Note that the serial number and state are now column oriented instead of tab delimited. After the serial number and state, all qualifiers are listed with each preceded by a space. The output of the original devices command (without -l) is unchanged. Change-Id: Iceeb2789874effc25a630d514a375d6f1889dc56 Signed-off-by: Scott Anderson <saa@android.com>
2012-05-31 03:11:27 +02:00
* was malloc'ed and needs to freed. *dst will be set to a dup of src.
*/
static void qual_overwrite(char **dst, const char *src)
{
if (!dst)
return;
free(*dst);
*dst = NULL;
if (!src || !*src)
return;
*dst = strdup(src);
}
void parse_banner(char *banner, atransport *t)
{
static const char *prop_seps = ";";
static const char key_val_sep = '=';
adb: Generalizing -s to take qualifiers. Prior to this change, -s could take either a serial number or a device path (e.g. "-s 01498B1F02015015" or "-s usb:1-4.2"). This change extends -s to also allow product, model or device names (e.g. "-s product:mysid"). These new qualifiers will only be available on devices that are running an adb daemon that provides properties in the connect message per Change-Id: I09200decde4facb8fc9b4056fdae910155f2bcb9 The product, model and device are derived from the ro.product.name, ro.product.model and ro.product.device properties respectively. They are prefixed with "product:", "model:" or "device:" as appropriate. In addition, any non-alphanumerics in the model are changed to underscores. If the -s parameter matches multiple devices, the result will be the same as when multiple devices are connected but no -d, -e or -s option is specified. In general, this means the user will get "error: more than one device". However for get-state, get-devpath and get-serialno, they will get "unknown". The format of "devices -l" was changed to list all of the qualifiers that are available. The following example output (with the last digits of the serial numbers replaced with X's) is with a Galaxy Prime with an older adb daemon and another Galaxy Prime and Galaxy S both with the enhanced adb daemons: List of devices attached 016B75D60A0060XX device usb:2-5 product:mysid model:Galaxy_Nexus device:toro 3731B535FAC200XX device usb:1-4.2 product:soju model:Nexus_S device:crespo 01498B1F020150XX device usb:1-4.1 Note that the serial number and state are now column oriented instead of tab delimited. After the serial number and state, all qualifiers are listed with each preceded by a space. The output of the original devices command (without -l) is unchanged. Change-Id: Iceeb2789874effc25a630d514a375d6f1889dc56 Signed-off-by: Scott Anderson <saa@android.com>
2012-05-31 03:11:27 +02:00
char *cp;
char *type;
D("parse_banner: %s\n", banner);
type = banner;
cp = strchr(type, ':');
if (cp) {
*cp++ = 0;
/* Nothing is done with second field. */
cp = strchr(cp, ':');
if (cp) {
char *save;
char *key;
key = adb_strtok_r(cp + 1, prop_seps, &save);
while (key) {
cp = strchr(key, key_val_sep);
if (cp) {
*cp++ = '\0';
if (!strcmp(key, "ro.product.name"))
qual_overwrite(&t->product, cp);
else if (!strcmp(key, "ro.product.model"))
qual_overwrite(&t->model, cp);
else if (!strcmp(key, "ro.product.device"))
qual_overwrite(&t->device, cp);
}
key = adb_strtok_r(NULL, prop_seps, &save);
}
}
}
if(!strcmp(type, "bootloader")){
D("setting connection_state to CS_BOOTLOADER\n");
t->connection_state = CS_BOOTLOADER;
update_transports();
return;
}
if(!strcmp(type, "device")) {
D("setting connection_state to CS_DEVICE\n");
t->connection_state = CS_DEVICE;
update_transports();
return;
}
if(!strcmp(type, "recovery")) {
D("setting connection_state to CS_RECOVERY\n");
t->connection_state = CS_RECOVERY;
update_transports();
return;
}
if(!strcmp(type, "sideload")) {
D("setting connection_state to CS_SIDELOAD\n");
t->connection_state = CS_SIDELOAD;
update_transports();
return;
}
t->connection_state = CS_HOST;
}
void handle_packet(apacket *p, atransport *t)
{
asocket *s;
D("handle_packet() %c%c%c%c\n", ((char*) (&(p->msg.command)))[0],
((char*) (&(p->msg.command)))[1],
((char*) (&(p->msg.command)))[2],
((char*) (&(p->msg.command)))[3]);
print_packet("recv", p);
switch(p->msg.command){
case A_SYNC:
if(p->msg.arg0){
send_packet(p, t);
if(HOST) send_connect(t);
} else {
t->connection_state = CS_OFFLINE;
handle_offline(t);
send_packet(p, t);
}
return;
case A_CNXN: /* CONNECT(version, maxdata, "system-id-string") */
/* XXX verify version, etc */
if(t->connection_state != CS_OFFLINE) {
t->connection_state = CS_OFFLINE;
handle_offline(t);
}
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
parse_banner((char*) p->data, t);
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
if (HOST || !auth_enabled) {
handle_online(t);
if(!HOST) send_connect(t);
} else {
send_auth_request(t);
}
break;
case A_AUTH:
if (p->msg.arg0 == ADB_AUTH_TOKEN) {
t->connection_state = CS_UNAUTHORIZED;
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
t->key = adb_auth_nextkey(t->key);
if (t->key) {
send_auth_response(p->data, p->msg.data_length, t);
} else {
/* No more private keys to try, send the public key */
send_auth_publickey(t);
}
} else if (p->msg.arg0 == ADB_AUTH_SIGNATURE) {
if (adb_auth_verify(t->token, p->data, p->msg.data_length)) {
adb_auth_verified(t);
t->failed_auth_attempts = 0;
} else {
if (t->failed_auth_attempts++ > 10)
adb_sleep_ms(1000);
send_auth_request(t);
}
} else if (p->msg.arg0 == ADB_AUTH_RSAPUBLICKEY) {
adb_auth_confirm_key(p->data, p->msg.data_length, t);
}
break;
case A_OPEN: /* OPEN(local-id, 0, "destination") */
if (t->online && p->msg.arg0 != 0 && p->msg.arg1 == 0) {
char *name = (char*) p->data;
name[p->msg.data_length > 0 ? p->msg.data_length - 1 : 0] = 0;
s = create_local_service_socket(name);
if(s == 0) {
send_close(0, p->msg.arg0, t);
} else {
s->peer = create_remote_socket(p->msg.arg0, t);
s->peer->peer = s;
send_ready(s->id, s->peer->id, t);
s->ready(s);
}
}
break;
case A_OKAY: /* READY(local-id, remote-id, "") */
if (t->online && p->msg.arg0 != 0 && p->msg.arg1 != 0) {
if((s = find_local_socket(p->msg.arg1, 0))) {
if(s->peer == 0) {
/* On first READY message, create the connection. */
s->peer = create_remote_socket(p->msg.arg0, t);
s->peer->peer = s;
s->ready(s);
} else if (s->peer->id == p->msg.arg0) {
/* Other READY messages must use the same local-id */
s->ready(s);
} else {
D("Invalid A_OKAY(%d,%d), expected A_OKAY(%d,%d) on transport %s\n",
p->msg.arg0, p->msg.arg1, s->peer->id, p->msg.arg1, t->serial);
}
}
}
break;
case A_CLSE: /* CLOSE(local-id, remote-id, "") or CLOSE(0, remote-id, "") */
if (t->online && p->msg.arg1 != 0) {
if((s = find_local_socket(p->msg.arg1, p->msg.arg0))) {
/* According to protocol.txt, p->msg.arg0 might be 0 to indicate
* a failed OPEN only. However, due to a bug in previous ADB
* versions, CLOSE(0, remote-id, "") was also used for normal
* CLOSE() operations.
*
* This is bad because it means a compromised adbd could
* send packets to close connections between the host and
* other devices. To avoid this, only allow this if the local
* socket has a peer on the same transport.
*/
if (p->msg.arg0 == 0 && s->peer && s->peer->transport != t) {
D("Invalid A_CLSE(0, %u) from transport %s, expected transport %s\n",
p->msg.arg1, t->serial, s->peer->transport->serial);
} else {
s->close(s);
}
}
}
break;
case A_WRTE: /* WRITE(local-id, remote-id, <data>) */
if (t->online && p->msg.arg0 != 0 && p->msg.arg1 != 0) {
if((s = find_local_socket(p->msg.arg1, p->msg.arg0))) {
unsigned rid = p->msg.arg0;
p->len = p->msg.data_length;
if(s->enqueue(s, p) == 0) {
D("Enqueue the socket\n");
send_ready(s->id, rid, t);
}
return;
}
}
break;
default:
printf("handle_packet: what is %08x?!\n", p->msg.command);
}
put_apacket(p);
}
#if ADB_HOST
int launch_server(int server_port)
{
#if defined(_WIN32)
/* we need to start the server in the background */
/* we create a PIPE that will be used to wait for the server's "OK" */
/* message since the pipe handles must be inheritable, we use a */
/* security attribute */
HANDLE pipe_read, pipe_write;
HANDLE stdout_handle, stderr_handle;
SECURITY_ATTRIBUTES sa;
STARTUPINFO startup;
PROCESS_INFORMATION pinfo;
char program_path[ MAX_PATH ];
int ret;
sa.nLength = sizeof(sa);
sa.lpSecurityDescriptor = NULL;
sa.bInheritHandle = TRUE;
/* create pipe, and ensure its read handle isn't inheritable */
ret = CreatePipe( &pipe_read, &pipe_write, &sa, 0 );
if (!ret) {
fprintf(stderr, "CreatePipe() failure, error %ld\n", GetLastError() );
return -1;
}
SetHandleInformation( pipe_read, HANDLE_FLAG_INHERIT, 0 );
/* Some programs want to launch an adb command and collect its output by
* calling CreateProcess with inheritable stdout/stderr handles, then
* using read() to get its output. When this happens, the stdout/stderr
* handles passed to the adb client process will also be inheritable.
* When starting the adb server here, care must be taken to reset them
* to non-inheritable.
* Otherwise, something bad happens: even if the adb command completes,
* the calling process is stuck while read()-ing from the stdout/stderr
* descriptors, because they're connected to corresponding handles in the
* adb server process (even if the latter never uses/writes to them).
*/
stdout_handle = GetStdHandle( STD_OUTPUT_HANDLE );
stderr_handle = GetStdHandle( STD_ERROR_HANDLE );
if (stdout_handle != INVALID_HANDLE_VALUE) {
SetHandleInformation( stdout_handle, HANDLE_FLAG_INHERIT, 0 );
}
if (stderr_handle != INVALID_HANDLE_VALUE) {
SetHandleInformation( stderr_handle, HANDLE_FLAG_INHERIT, 0 );
}
ZeroMemory( &startup, sizeof(startup) );
startup.cb = sizeof(startup);
startup.hStdInput = GetStdHandle( STD_INPUT_HANDLE );
startup.hStdOutput = pipe_write;
startup.hStdError = GetStdHandle( STD_ERROR_HANDLE );
startup.dwFlags = STARTF_USESTDHANDLES;
ZeroMemory( &pinfo, sizeof(pinfo) );
/* get path of current program */
GetModuleFileName( NULL, program_path, sizeof(program_path) );
char args[64];
snprintf(args, sizeof(args), "adb -P %d fork-server server", server_port);
ret = CreateProcess(
program_path, /* program path */
args,
/* the fork-server argument will set the
debug = 2 in the child */
NULL, /* process handle is not inheritable */
NULL, /* thread handle is not inheritable */
TRUE, /* yes, inherit some handles */
DETACHED_PROCESS, /* the new process doesn't have a console */
NULL, /* use parent's environment block */
NULL, /* use parent's starting directory */
&startup, /* startup info, i.e. std handles */
&pinfo );
CloseHandle( pipe_write );
if (!ret) {
fprintf(stderr, "CreateProcess failure, error %ld\n", GetLastError() );
CloseHandle( pipe_read );
return -1;
}
CloseHandle( pinfo.hProcess );
CloseHandle( pinfo.hThread );
/* wait for the "OK\n" message */
{
char temp[3];
DWORD count;
ret = ReadFile( pipe_read, temp, 3, &count, NULL );
CloseHandle( pipe_read );
if ( !ret ) {
fprintf(stderr, "could not read ok from ADB Server, error = %ld\n", GetLastError() );
return -1;
}
if (count != 3 || temp[0] != 'O' || temp[1] != 'K' || temp[2] != '\n') {
fprintf(stderr, "ADB server didn't ACK\n" );
return -1;
}
}
#else /* !defined(_WIN32) */
char path[PATH_MAX];
int fd[2];
// set up a pipe so the child can tell us when it is ready.
// fd[0] will be parent's end, and fd[1] will get mapped to stderr in the child.
if (pipe(fd)) {
fprintf(stderr, "pipe failed in launch_server, errno: %d\n", errno);
return -1;
}
get_my_path(path, PATH_MAX);
pid_t pid = fork();
if(pid < 0) return -1;
if (pid == 0) {
// child side of the fork
// redirect stderr to the pipe
// we use stderr instead of stdout due to stdout's buffering behavior.
adb_close(fd[0]);
dup2(fd[1], STDERR_FILENO);
adb_close(fd[1]);
char str_port[30];
snprintf(str_port, sizeof(str_port), "%d", server_port);
// child process
int result = execl(path, "adb", "-P", str_port, "fork-server", "server", NULL);
// this should not return
fprintf(stderr, "OOPS! execl returned %d, errno: %d\n", result, errno);
} else {
// parent side of the fork
char temp[3];
temp[0] = 'A'; temp[1] = 'B'; temp[2] = 'C';
// wait for the "OK\n" message
adb_close(fd[1]);
int ret = adb_read(fd[0], temp, 3);
int saved_errno = errno;
adb_close(fd[0]);
if (ret < 0) {
fprintf(stderr, "could not read ok from ADB Server, errno = %d\n", saved_errno);
return -1;
}
if (ret != 3 || temp[0] != 'O' || temp[1] != 'K' || temp[2] != '\n') {
fprintf(stderr, "ADB server didn't ACK\n" );
return -1;
}
setsid();
}
#endif /* !defined(_WIN32) */
return 0;
}
#endif /* ADB_HOST */
// Try to handle a network forwarding request.
// This returns 1 on success, 0 on failure, and -1 to indicate this is not
// a forwarding-related request.
int handle_forward_request(const char* service, transport_type ttype, char* serial, int reply_fd)
{
if (!strcmp(service, "list-forward")) {
// Create the list of forward redirections.
int buffer_size = format_listeners(NULL, 0);
// Add one byte for the trailing zero.
char* buffer = malloc(buffer_size + 1);
if (buffer == NULL) {
sendfailmsg(reply_fd, "not enough memory");
return 1;
}
(void) format_listeners(buffer, buffer_size + 1);
#if ADB_HOST
send_msg_with_okay(reply_fd, buffer, buffer_size);
#else
send_msg_with_header(reply_fd, buffer, buffer_size);
#endif
free(buffer);
return 1;
}
if (!strcmp(service, "killforward-all")) {
remove_all_listeners();
#if ADB_HOST
/* On the host: 1st OKAY is connect, 2nd OKAY is status */
adb_write(reply_fd, "OKAY", 4);
#endif
adb_write(reply_fd, "OKAY", 4);
return 1;
}
if (!strncmp(service, "forward:",8) ||
!strncmp(service, "killforward:",12)) {
char *local, *remote, *err;
int r;
atransport *transport;
int createForward = strncmp(service, "kill", 4);
int no_rebind = 0;
local = strchr(service, ':') + 1;
// Handle forward:norebind:<local>... here
if (createForward && !strncmp(local, "norebind:", 9)) {
no_rebind = 1;
local = strchr(local, ':') + 1;
}
remote = strchr(local,';');
if (createForward) {
// Check forward: parameter format: '<local>;<remote>'
if(remote == 0) {
sendfailmsg(reply_fd, "malformed forward spec");
return 1;
}
*remote++ = 0;
if((local[0] == 0) || (remote[0] == 0) || (remote[0] == '*')) {
sendfailmsg(reply_fd, "malformed forward spec");
return 1;
}
} else {
// Check killforward: parameter format: '<local>'
if (local[0] == 0) {
sendfailmsg(reply_fd, "malformed forward spec");
return 1;
}
}
transport = acquire_one_transport(CS_ANY, ttype, serial, &err);
if (!transport) {
sendfailmsg(reply_fd, err);
return 1;
}
if (createForward) {
r = install_listener(local, remote, transport, no_rebind);
} else {
r = remove_listener(local, transport);
}
if(r == 0) {
#if ADB_HOST
/* On the host: 1st OKAY is connect, 2nd OKAY is status */
writex(reply_fd, "OKAY", 4);
#endif
writex(reply_fd, "OKAY", 4);
return 1;
}
if (createForward) {
const char* message;
switch (r) {
case INSTALL_STATUS_CANNOT_BIND:
message = "cannot bind to socket";
break;
case INSTALL_STATUS_CANNOT_REBIND:
message = "cannot rebind existing socket";
break;
default:
message = "internal error";
}
sendfailmsg(reply_fd, message);
} else {
sendfailmsg(reply_fd, "cannot remove listener");
}
return 1;
}
return 0;
}
int handle_host_request(char *service, transport_type ttype, char* serial, int reply_fd, asocket *s)
{
if(!strcmp(service, "kill")) {
fprintf(stderr,"adb server killed by remote request\n");
fflush(stdout);
adb_write(reply_fd, "OKAY", 4);
usb_cleanup();
exit(0);
}
#if ADB_HOST
atransport *transport = NULL;
// "transport:" is used for switching transport with a specified serial number
// "transport-usb:" is used for switching transport to the only USB transport
// "transport-local:" is used for switching transport to the only local transport
// "transport-any:" is used for switching transport to the only transport
if (!strncmp(service, "transport", strlen("transport"))) {
char* error_string = "unknown failure";
transport_type type = kTransportAny;
if (!strncmp(service, "transport-usb", strlen("transport-usb"))) {
type = kTransportUsb;
} else if (!strncmp(service, "transport-local", strlen("transport-local"))) {
type = kTransportLocal;
} else if (!strncmp(service, "transport-any", strlen("transport-any"))) {
type = kTransportAny;
} else if (!strncmp(service, "transport:", strlen("transport:"))) {
service += strlen("transport:");
serial = service;
}
transport = acquire_one_transport(CS_ANY, type, serial, &error_string);
if (transport) {
s->transport = transport;
adb_write(reply_fd, "OKAY", 4);
} else {
sendfailmsg(reply_fd, error_string);
}
return 1;
}
// return a list of all connected devices
if (!strncmp(service, "devices", 7)) {
char buffer[4096];
int use_long = !strcmp(service+7, "-l");
if (use_long || service[7] == 0) {
memset(buffer, 0, sizeof(buffer));
D("Getting device list \n");
list_transports(buffer, sizeof(buffer), use_long);
D("Wrote device list \n");
send_msg_with_okay(reply_fd, buffer, strlen(buffer));
return 0;
}
}
// remove TCP transport
if (!strncmp(service, "disconnect:", 11)) {
char buffer[4096];
memset(buffer, 0, sizeof(buffer));
char* serial = service + 11;
if (serial[0] == 0) {
// disconnect from all TCP devices
unregister_all_tcp_transports();
} else {
char hostbuf[100];
// assume port 5555 if no port is specified
if (!strchr(serial, ':')) {
snprintf(hostbuf, sizeof(hostbuf) - 1, "%s:5555", serial);
serial = hostbuf;
}
atransport *t = find_transport(serial);
if (t) {
unregister_transport(t);
} else {
snprintf(buffer, sizeof(buffer), "No such device %s", serial);
}
}
send_msg_with_okay(reply_fd, buffer, strlen(buffer));
return 0;
}
// returns our value for ADB_SERVER_VERSION
if (!strcmp(service, "version")) {
char version[12];
snprintf(version, sizeof version, "%04x", ADB_SERVER_VERSION);
send_msg_with_okay(reply_fd, version, strlen(version));
return 0;
}
if(!strncmp(service,"get-serialno",strlen("get-serialno"))) {
char *out = "unknown";
transport = acquire_one_transport(CS_ANY, ttype, serial, NULL);
if (transport && transport->serial) {
out = transport->serial;
}
send_msg_with_okay(reply_fd, out, strlen(out));
return 0;
}
if(!strncmp(service,"get-devpath",strlen("get-devpath"))) {
char *out = "unknown";
transport = acquire_one_transport(CS_ANY, ttype, serial, NULL);
if (transport && transport->devpath) {
out = transport->devpath;
}
send_msg_with_okay(reply_fd, out, strlen(out));
return 0;
}
// indicates a new emulator instance has started
if (!strncmp(service,"emulator:",9)) {
int port = atoi(service+9);
local_connect(port);
/* we don't even need to send a reply */
return 0;
}
if(!strncmp(service,"get-state",strlen("get-state"))) {
transport = acquire_one_transport(CS_ANY, ttype, serial, NULL);
char *state = connection_state_name(transport);
send_msg_with_okay(reply_fd, state, strlen(state));
return 0;
}
#endif // ADB_HOST
int ret = handle_forward_request(service, ttype, serial, reply_fd);
if (ret >= 0)
return ret - 1;
return -1;
}