platform_system_core/init/init.cpp

1196 lines
40 KiB
C++
Raw Normal View History

2008-10-21 16:00:00 +02:00
/*
* Copyright (C) 2008 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "init.h"
#include <ctype.h>
#include <dirent.h>
#include <errno.h>
#include <fcntl.h>
#include <inttypes.h>
#include <libgen.h>
#include <paths.h>
#include <seccomp_policy.h>
#include <signal.h>
#include <stdarg.h>
2008-10-21 16:00:00 +02:00
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/epoll.h>
2008-10-21 16:00:00 +02:00
#include <sys/mount.h>
#include <sys/socket.h>
#include <sys/stat.h>
#include <sys/sysmacros.h>
#include <sys/types.h>
2008-10-21 16:00:00 +02:00
#include <sys/un.h>
#include <sys/wait.h>
#include <unistd.h>
#include <android-base/chrono_utils.h>
#include <android-base/file.h>
#include <android-base/logging.h>
#include <android-base/properties.h>
#include <android-base/strings.h>
#include <android-base/unique_fd.h>
#include <keyutils.h>
#include <libavb/libavb.h>
#include <private/android_filesystem_config.h>
#include <selinux/android.h>
#include <selinux/selinux.h>
2008-10-21 16:00:00 +02:00
#include <fstream>
#include <memory>
#include <vector>
#include "action.h"
#include "bootchart.h"
#include "import_parser.h"
#include "init_first_stage.h"
#include "init_parser.h"
#include "keychords.h"
#include "log.h"
2008-10-21 16:00:00 +02:00
#include "property_service.h"
#include "reboot.h"
#include "service.h"
#include "signal_handler.h"
#include "ueventd.h"
#include "util.h"
#include "watchdogd.h"
2008-10-21 16:00:00 +02:00
using namespace std::string_literals;
using android::base::boot_clock;
using android::base::GetProperty;
using android::base::Timer;
namespace android {
namespace init {
struct selabel_handle *sehandle;
struct selabel_handle *sehandle_prop;
2008-10-21 16:00:00 +02:00
static int property_triggers_enabled = 0;
static char qemu[32];
std::string default_console = "/dev/console";
static time_t process_needs_restart_at;
2008-10-21 16:00:00 +02:00
const char *ENV[32];
2008-10-21 16:00:00 +02:00
static int epoll_fd = -1;
static std::unique_ptr<Timer> waiting_for_prop(nullptr);
static std::string wait_prop_name;
static std::string wait_prop_value;
static bool shutting_down;
void DumpState() {
ServiceManager::GetInstance().DumpState();
ActionManager::GetInstance().DumpState();
}
void register_epoll_handler(int fd, void (*fn)()) {
epoll_event ev;
ev.events = EPOLLIN;
ev.data.ptr = reinterpret_cast<void*>(fn);
if (epoll_ctl(epoll_fd, EPOLL_CTL_ADD, fd, &ev) == -1) {
PLOG(ERROR) << "epoll_ctl failed";
}
}
2008-10-21 16:00:00 +02:00
/* add_environment - add "key=value" to the current environment */
int add_environment(const char *key, const char *val)
{
size_t n;
size_t key_len = strlen(key);
/* The last environment entry is reserved to terminate the list */
for (n = 0; n < (arraysize(ENV) - 1); n++) {
/* Delete any existing entry for this key */
if (ENV[n] != NULL) {
size_t entry_key_len = strcspn(ENV[n], "=");
if ((entry_key_len == key_len) && (strncmp(ENV[n], key, entry_key_len) == 0)) {
free((char*)ENV[n]);
ENV[n] = NULL;
}
}
/* Add entry if a free slot is available */
if (ENV[n] == NULL) {
char* entry;
asprintf(&entry, "%s=%s", key, val);
2008-10-21 16:00:00 +02:00
ENV[n] = entry;
return 0;
}
}
LOG(ERROR) << "No env. room to store: '" << key << "':'" << val << "'";
return -1;
2008-10-21 16:00:00 +02:00
}
bool start_waiting_for_property(const char *name, const char *value)
{
if (waiting_for_prop) {
return false;
}
if (GetProperty(name, "") != value) {
// Current property value is not equal to expected value
wait_prop_name = name;
wait_prop_value = value;
waiting_for_prop.reset(new Timer());
} else {
LOG(INFO) << "start_waiting_for_property(\""
<< name << "\", \"" << value << "\"): already set";
}
return true;
}
void ResetWaitForProp() {
wait_prop_name.clear();
wait_prop_value.clear();
waiting_for_prop.reset();
}
void property_changed(const std::string& name, const std::string& value) {
// If the property is sys.powerctl, we bypass the event queue and immediately handle it.
// This is to ensure that init will always and immediately shutdown/reboot, regardless of
// if there are other pending events to process or if init is waiting on an exec service or
// waiting on a property.
// In non-thermal-shutdown case, 'shutdown' trigger will be fired to let device specific
// commands to be executed.
if (name == "sys.powerctl") {
if (HandlePowerctlMessage(value)) {
shutting_down = true;
}
}
if (property_triggers_enabled) ActionManager::GetInstance().QueuePropertyChange(name, value);
if (waiting_for_prop) {
if (wait_prop_name == name && wait_prop_value == value) {
LOG(INFO) << "Wait for property took " << *waiting_for_prop;
ResetWaitForProp();
}
}
2008-10-21 16:00:00 +02:00
}
static void restart_processes()
{
process_needs_restart_at = 0;
ServiceManager::GetInstance().ForEachServiceWithFlags(SVC_RESTARTING, [](Service* s) {
s->RestartIfNeeded(&process_needs_restart_at);
});
2008-10-21 16:00:00 +02:00
}
void handle_control_message(const std::string& msg, const std::string& name) {
Service* svc = ServiceManager::GetInstance().FindServiceByName(name);
if (svc == nullptr) {
LOG(ERROR) << "no such service '" << name << "'";
return;
}
if (msg == "start") {
svc->Start();
} else if (msg == "stop") {
svc->Stop();
} else if (msg == "restart") {
svc->Restart();
2008-10-21 16:00:00 +02:00
} else {
LOG(ERROR) << "unknown control msg '" << msg << "'";
2008-10-21 16:00:00 +02:00
}
}
static int wait_for_coldboot_done_action(const std::vector<std::string>& args) {
Timer t;
LOG(VERBOSE) << "Waiting for " COLDBOOT_DONE "...";
Replace the "coldboot" timeout with a property. Also rename init's existing boot-time related properties so they're all "ro.*" properties. Example result: # Three properties showing when init started... [ro.boottime.init]: [5294587604] # ...how long it waited for ueventd... [ro.boottime.init.cold_boot_wait]: [646956470] # ...and how long SELinux initialization took... [ro.boottime.init.selinux]: [45742921] # Plus one property for each service, showing when it first started. [ro.boottime.InputEventFind]: [10278767840] [ro.boottime.adbd]: [8359267180] [ro.boottime.atfwd]: [10338554773] [ro.boottime.audioserver]: [10298157478] [ro.boottime.bootanim]: [9323670089] [ro.boottime.cameraserver]: [10299402321] [ro.boottime.cnd]: [10335931856] [ro.boottime.debuggerd]: [7001352774] [ro.boottime.debuggerd64]: [7002261785] [ro.boottime.drm]: [10301082113] [ro.boottime.fingerprintd]: [10331443314] [ro.boottime.flash-nanohub-fw]: [6995265534] [ro.boottime.gatekeeperd]: [10340355242] [ro.boottime.healthd]: [7856893380] [ro.boottime.hwservicemanager]: [7856051088] [ro.boottime.imscmservice]: [10290530758] [ro.boottime.imsdatadaemon]: [10358136702] [ro.boottime.imsqmidaemon]: [10289084872] [ro.boottime.installd]: [10303296020] [ro.boottime.irsc_util]: [10279807632] [ro.boottime.keystore]: [10305034093] [ro.boottime.lmkd]: [7863506714] [ro.boottime.loc_launcher]: [10324525241] [ro.boottime.logd]: [6526221633] [ro.boottime.logd-reinit]: [7850662702] [ro.boottime.mcfg-sh]: [10337268315] [ro.boottime.media]: [10312152687] [ro.boottime.mediacodec]: [10306852530] [ro.boottime.mediadrm]: [10308707999] [ro.boottime.mediaextractor]: [10310681177] [ro.boottime.msm_irqbalance]: [7862451974] [ro.boottime.netd]: [10313523104] [ro.boottime.netmgrd]: [10285009351] [ro.boottime.oem_qmi_server]: [10293329092] [ro.boottime.per_mgr]: [7857915776] [ro.boottime.per_proxy]: [8335121605] [ro.boottime.perfd]: [10283443101] [ro.boottime.qcamerasvr]: [10329644772] [ro.boottime.qmuxd]: [10282346643] [ro.boottime.qseecomd]: [6855708593] [ro.boottime.qti]: [10286196851] [ro.boottime.ril-daemon]: [10314933677] [ro.boottime.rmt_storage]: [7859105047] [ro.boottime.servicemanager]: [7864555881] [ro.boottime.ss_ramdump]: [8337634938] [ro.boottime.ssr_setup]: [8336268324] [ro.boottime.surfaceflinger]: [7866921402] [ro.boottime.thermal-engine]: [10281249924] [ro.boottime.time_daemon]: [10322006542] [ro.boottime.ueventd]: [5618663938] [ro.boottime.vold]: [7003493920] [ro.boottime.wificond]: [10316641073] [ro.boottime.wpa_supplicant]: [18959816881] [ro.boottime.zygote]: [10295295029] [ro.boottime.zygote_secondary]: [10296637269] Bug: http://b/31800756 Test: boots Change-Id: I094cce0c1bab9406d950ca94212689dc2e15dba5
2016-11-29 20:20:58 +01:00
// Historically we had a 1s timeout here because we weren't otherwise
// tracking boot time, and many OEMs made their sepolicy regular
// expressions too expensive (http://b/19899875).
// Now we're tracking boot time, just log the time taken to a system
// property. We still panic if it takes more than a minute though,
// because any build that slow isn't likely to boot at all, and we'd
// rather any test lab devices fail back to the bootloader.
if (wait_for_file(COLDBOOT_DONE, 60s) < 0) {
LOG(ERROR) << "Timed out waiting for " COLDBOOT_DONE;
Replace the "coldboot" timeout with a property. Also rename init's existing boot-time related properties so they're all "ro.*" properties. Example result: # Three properties showing when init started... [ro.boottime.init]: [5294587604] # ...how long it waited for ueventd... [ro.boottime.init.cold_boot_wait]: [646956470] # ...and how long SELinux initialization took... [ro.boottime.init.selinux]: [45742921] # Plus one property for each service, showing when it first started. [ro.boottime.InputEventFind]: [10278767840] [ro.boottime.adbd]: [8359267180] [ro.boottime.atfwd]: [10338554773] [ro.boottime.audioserver]: [10298157478] [ro.boottime.bootanim]: [9323670089] [ro.boottime.cameraserver]: [10299402321] [ro.boottime.cnd]: [10335931856] [ro.boottime.debuggerd]: [7001352774] [ro.boottime.debuggerd64]: [7002261785] [ro.boottime.drm]: [10301082113] [ro.boottime.fingerprintd]: [10331443314] [ro.boottime.flash-nanohub-fw]: [6995265534] [ro.boottime.gatekeeperd]: [10340355242] [ro.boottime.healthd]: [7856893380] [ro.boottime.hwservicemanager]: [7856051088] [ro.boottime.imscmservice]: [10290530758] [ro.boottime.imsdatadaemon]: [10358136702] [ro.boottime.imsqmidaemon]: [10289084872] [ro.boottime.installd]: [10303296020] [ro.boottime.irsc_util]: [10279807632] [ro.boottime.keystore]: [10305034093] [ro.boottime.lmkd]: [7863506714] [ro.boottime.loc_launcher]: [10324525241] [ro.boottime.logd]: [6526221633] [ro.boottime.logd-reinit]: [7850662702] [ro.boottime.mcfg-sh]: [10337268315] [ro.boottime.media]: [10312152687] [ro.boottime.mediacodec]: [10306852530] [ro.boottime.mediadrm]: [10308707999] [ro.boottime.mediaextractor]: [10310681177] [ro.boottime.msm_irqbalance]: [7862451974] [ro.boottime.netd]: [10313523104] [ro.boottime.netmgrd]: [10285009351] [ro.boottime.oem_qmi_server]: [10293329092] [ro.boottime.per_mgr]: [7857915776] [ro.boottime.per_proxy]: [8335121605] [ro.boottime.perfd]: [10283443101] [ro.boottime.qcamerasvr]: [10329644772] [ro.boottime.qmuxd]: [10282346643] [ro.boottime.qseecomd]: [6855708593] [ro.boottime.qti]: [10286196851] [ro.boottime.ril-daemon]: [10314933677] [ro.boottime.rmt_storage]: [7859105047] [ro.boottime.servicemanager]: [7864555881] [ro.boottime.ss_ramdump]: [8337634938] [ro.boottime.ssr_setup]: [8336268324] [ro.boottime.surfaceflinger]: [7866921402] [ro.boottime.thermal-engine]: [10281249924] [ro.boottime.time_daemon]: [10322006542] [ro.boottime.ueventd]: [5618663938] [ro.boottime.vold]: [7003493920] [ro.boottime.wificond]: [10316641073] [ro.boottime.wpa_supplicant]: [18959816881] [ro.boottime.zygote]: [10295295029] [ro.boottime.zygote_secondary]: [10296637269] Bug: http://b/31800756 Test: boots Change-Id: I094cce0c1bab9406d950ca94212689dc2e15dba5
2016-11-29 20:20:58 +01:00
panic();
}
property_set("ro.boottime.init.cold_boot_wait", std::to_string(t.duration().count()));
return 0;
}
/*
* Writes 512 bytes of output from Hardware RNG (/dev/hw_random, backed
* by Linux kernel's hw_random framework) into Linux RNG's via /dev/urandom.
* Does nothing if Hardware RNG is not present.
*
* Since we don't yet trust the quality of Hardware RNG, these bytes are not
* mixed into the primary pool of Linux RNG and the entropy estimate is left
* unmodified.
*
* If the HW RNG device /dev/hw_random is present, we require that at least
* 512 bytes read from it are written into Linux RNG. QA is expected to catch
* devices/configurations where these I/O operations are blocking for a long
* time. We do not reboot or halt on failures, as this is a best-effort
* attempt.
*/
static int mix_hwrng_into_linux_rng_action(const std::vector<std::string>& args)
{
int result = -1;
int hwrandom_fd = -1;
int urandom_fd = -1;
char buf[512];
ssize_t chunk_size;
size_t total_bytes_written = 0;
hwrandom_fd = TEMP_FAILURE_RETRY(
open("/dev/hw_random", O_RDONLY | O_NOFOLLOW | O_CLOEXEC));
if (hwrandom_fd == -1) {
if (errno == ENOENT) {
LOG(ERROR) << "/dev/hw_random not found";
// It's not an error to not have a Hardware RNG.
result = 0;
} else {
PLOG(ERROR) << "Failed to open /dev/hw_random";
}
goto ret;
}
urandom_fd = TEMP_FAILURE_RETRY(
open("/dev/urandom", O_WRONLY | O_NOFOLLOW | O_CLOEXEC));
if (urandom_fd == -1) {
PLOG(ERROR) << "Failed to open /dev/urandom";
goto ret;
}
while (total_bytes_written < sizeof(buf)) {
chunk_size = TEMP_FAILURE_RETRY(
read(hwrandom_fd, buf, sizeof(buf) - total_bytes_written));
if (chunk_size == -1) {
PLOG(ERROR) << "Failed to read from /dev/hw_random";
goto ret;
} else if (chunk_size == 0) {
LOG(ERROR) << "Failed to read from /dev/hw_random: EOF";
goto ret;
}
chunk_size = TEMP_FAILURE_RETRY(write(urandom_fd, buf, chunk_size));
if (chunk_size == -1) {
PLOG(ERROR) << "Failed to write to /dev/urandom";
goto ret;
}
total_bytes_written += chunk_size;
}
LOG(INFO) << "Mixed " << total_bytes_written << " bytes from /dev/hw_random into /dev/urandom";
result = 0;
ret:
if (hwrandom_fd != -1) {
close(hwrandom_fd);
}
if (urandom_fd != -1) {
close(urandom_fd);
}
return result;
}
static void security_failure() {
LOG(ERROR) << "Security failure...";
panic();
}
static bool set_highest_available_option_value(std::string path, int min, int max)
{
std::ifstream inf(path, std::fstream::in);
if (!inf) {
LOG(ERROR) << "Cannot open for reading: " << path;
return false;
}
int current = max;
while (current >= min) {
// try to write out new value
std::string str_val = std::to_string(current);
std::ofstream of(path, std::fstream::out);
if (!of) {
LOG(ERROR) << "Cannot open for writing: " << path;
return false;
}
of << str_val << std::endl;
of.close();
// check to make sure it was recorded
inf.seekg(0);
std::string str_rec;
inf >> str_rec;
if (str_val.compare(str_rec) == 0) {
break;
}
current--;
}
inf.close();
if (current < min) {
LOG(ERROR) << "Unable to set minimum option value " << min << " in " << path;
return false;
}
return true;
}
#define MMAP_RND_PATH "/proc/sys/vm/mmap_rnd_bits"
#define MMAP_RND_COMPAT_PATH "/proc/sys/vm/mmap_rnd_compat_bits"
/* __attribute__((unused)) due to lack of mips support: see mips block
* in set_mmap_rnd_bits_action */
static bool __attribute__((unused)) set_mmap_rnd_bits_min(int start, int min, bool compat) {
std::string path;
if (compat) {
path = MMAP_RND_COMPAT_PATH;
} else {
path = MMAP_RND_PATH;
}
return set_highest_available_option_value(path, min, start);
}
/*
* Set /proc/sys/vm/mmap_rnd_bits and potentially
* /proc/sys/vm/mmap_rnd_compat_bits to the maximum supported values.
* Returns -1 if unable to set these to an acceptable value.
*
* To support this sysctl, the following upstream commits are needed:
*
* d07e22597d1d mm: mmap: add new /proc tunable for mmap_base ASLR
* e0c25d958f78 arm: mm: support ARCH_MMAP_RND_BITS
* 8f0d3aa9de57 arm64: mm: support ARCH_MMAP_RND_BITS
* 9e08f57d684a x86: mm: support ARCH_MMAP_RND_BITS
* ec9ee4acd97c drivers: char: random: add get_random_long()
* 5ef11c35ce86 mm: ASLR: use get_random_long()
*/
static int set_mmap_rnd_bits_action(const std::vector<std::string>& args)
{
int ret = -1;
/* values are arch-dependent */
#if defined(USER_MODE_LINUX)
/* uml does not support mmap_rnd_bits */
ret = 0;
#elif defined(__aarch64__)
/* arm64 supports 18 - 33 bits depending on pagesize and VA_SIZE */
if (set_mmap_rnd_bits_min(33, 24, false)
&& set_mmap_rnd_bits_min(16, 16, true)) {
ret = 0;
}
#elif defined(__x86_64__)
/* x86_64 supports 28 - 32 bits */
if (set_mmap_rnd_bits_min(32, 32, false)
&& set_mmap_rnd_bits_min(16, 16, true)) {
ret = 0;
}
#elif defined(__arm__) || defined(__i386__)
/* check to see if we're running on 64-bit kernel */
bool h64 = !access(MMAP_RND_COMPAT_PATH, F_OK);
/* supported 32-bit architecture must have 16 bits set */
if (set_mmap_rnd_bits_min(16, 16, h64)) {
ret = 0;
}
#elif defined(__mips__) || defined(__mips64__)
// TODO: add mips support b/27788820
ret = 0;
#else
LOG(ERROR) << "Unknown architecture";
#endif
if (ret == -1) {
LOG(ERROR) << "Unable to set adequate mmap entropy value!";
security_failure();
}
return ret;
}
#define KPTR_RESTRICT_PATH "/proc/sys/kernel/kptr_restrict"
#define KPTR_RESTRICT_MINVALUE 2
#define KPTR_RESTRICT_MAXVALUE 4
/* Set kptr_restrict to the highest available level.
*
* Aborts if unable to set this to an acceptable value.
*/
static int set_kptr_restrict_action(const std::vector<std::string>& args)
{
std::string path = KPTR_RESTRICT_PATH;
if (!set_highest_available_option_value(path, KPTR_RESTRICT_MINVALUE, KPTR_RESTRICT_MAXVALUE)) {
LOG(ERROR) << "Unable to set adequate kptr_restrict value!";
security_failure();
}
return 0;
}
static int keychord_init_action(const std::vector<std::string>& args)
{
keychord_init();
return 0;
}
static int console_init_action(const std::vector<std::string>& args)
2008-10-21 16:00:00 +02:00
{
std::string console = GetProperty("ro.boot.console", "");
if (!console.empty()) {
default_console = "/dev/" + console;
}
return 0;
}
static void import_kernel_nv(const std::string& key, const std::string& value, bool for_emulator) {
if (key.empty()) return;
if (for_emulator) {
// In the emulator, export any kernel option with the "ro.kernel." prefix.
property_set("ro.kernel." + key, value);
return;
}
if (key == "qemu") {
strlcpy(qemu, value.c_str(), sizeof(qemu));
} else if (android::base::StartsWith(key, "androidboot.")) {
property_set("ro.boot." + key.substr(12), value);
}
}
static void export_oem_lock_status() {
if (!android::base::GetBoolProperty("ro.oem_unlock_supported", false)) {
return;
}
std::string value = GetProperty("ro.boot.verifiedbootstate", "");
if (!value.empty()) {
property_set("ro.boot.flash.locked", value == "orange" ? "0" : "1");
}
}
static void export_kernel_boot_props() {
struct {
const char *src_prop;
const char *dst_prop;
const char *default_value;
} prop_map[] = {
{ "ro.boot.serialno", "ro.serialno", "", },
{ "ro.boot.mode", "ro.bootmode", "unknown", },
{ "ro.boot.baseband", "ro.baseband", "unknown", },
{ "ro.boot.bootloader", "ro.bootloader", "unknown", },
{ "ro.boot.hardware", "ro.hardware", "unknown", },
{ "ro.boot.revision", "ro.revision", "0", },
};
for (size_t i = 0; i < arraysize(prop_map); i++) {
std::string value = GetProperty(prop_map[i].src_prop, "");
property_set(prop_map[i].dst_prop, (!value.empty()) ? value : prop_map[i].default_value);
}
}
static void process_kernel_dt() {
if (!is_android_dt_value_expected("compatible", "android,firmware")) {
return;
}
std::unique_ptr<DIR, int (*)(DIR*)> dir(opendir(kAndroidDtDir.c_str()), closedir);
if (!dir) return;
std::string dt_file;
struct dirent *dp;
while ((dp = readdir(dir.get())) != NULL) {
if (dp->d_type != DT_REG || !strcmp(dp->d_name, "compatible") || !strcmp(dp->d_name, "name")) {
continue;
}
std::string file_name = kAndroidDtDir + dp->d_name;
android::base::ReadFileToString(file_name, &dt_file);
std::replace(dt_file.begin(), dt_file.end(), ',', '.');
property_set("ro.boot."s + dp->d_name, dt_file);
}
}
static void process_kernel_cmdline() {
// The first pass does the common stuff, and finds if we are in qemu.
// The second pass is only necessary for qemu to export all kernel params
// as properties.
import_kernel_cmdline(false, import_kernel_nv);
if (qemu[0]) import_kernel_cmdline(true, import_kernel_nv);
}
static int property_enable_triggers_action(const std::vector<std::string>& args)
{
/* Enable property triggers. */
property_triggers_enabled = 1;
return 0;
}
static int queue_property_triggers_action(const std::vector<std::string>& args)
{
ActionManager::GetInstance().QueueBuiltinAction(property_enable_triggers_action, "enable_property_trigger");
ActionManager::GetInstance().QueueAllPropertyActions();
return 0;
}
static void global_seccomp() {
import_kernel_cmdline(false, [](const std::string& key, const std::string& value, bool in_qemu) {
if (key == "androidboot.seccomp" && value == "global" && !set_global_seccomp_filter()) {
LOG(ERROR) << "Failed to globally enable seccomp!";
panic();
}
});
}
static void selinux_init_all_handles(void)
{
sehandle = selinux_android_file_context_handle();
selinux_android_set_sehandle(sehandle);
sehandle_prop = selinux_android_prop_context_handle();
}
enum selinux_enforcing_status { SELINUX_PERMISSIVE, SELINUX_ENFORCING };
static selinux_enforcing_status selinux_status_from_cmdline() {
selinux_enforcing_status status = SELINUX_ENFORCING;
import_kernel_cmdline(false, [&](const std::string& key, const std::string& value, bool in_qemu) {
if (key == "androidboot.selinux" && value == "permissive") {
status = SELINUX_PERMISSIVE;
}
});
return status;
}
static bool selinux_is_enforcing(void)
{
if (ALLOW_PERMISSIVE_SELINUX) {
return selinux_status_from_cmdline() == SELINUX_ENFORCING;
}
return true;
}
static int audit_callback(void *data, security_class_t /*cls*/, char *buf, size_t len) {
property_audit_data *d = reinterpret_cast<property_audit_data*>(data);
if (!d || !d->name || !d->cr) {
LOG(ERROR) << "audit_callback invoked with null data arguments!";
return 0;
}
snprintf(buf, len, "property=%s pid=%d uid=%d gid=%d", d->name,
d->cr->pid, d->cr->uid, d->cr->gid);
return 0;
}
/*
* Forks, executes the provided program in the child, and waits for the completion in the parent.
* Child's stderr is captured and logged using LOG(ERROR).
*
* Returns true if the child exited with status code 0, returns false otherwise.
*/
static bool fork_execve_and_wait_for_completion(const char* filename, char* const argv[],
char* const envp[]) {
// Create a pipe used for redirecting child process's output.
// * pipe_fds[0] is the FD the parent will use for reading.
// * pipe_fds[1] is the FD the child will use for writing.
int pipe_fds[2];
if (pipe(pipe_fds) == -1) {
PLOG(ERROR) << "Failed to create pipe";
return false;
}
pid_t child_pid = fork();
if (child_pid == -1) {
PLOG(ERROR) << "Failed to fork for " << filename;
return false;
}
if (child_pid == 0) {
// fork succeeded -- this is executing in the child process
// Close the pipe FD not used by this process
TEMP_FAILURE_RETRY(close(pipe_fds[0]));
// Redirect stderr to the pipe FD provided by the parent
if (TEMP_FAILURE_RETRY(dup2(pipe_fds[1], STDERR_FILENO)) == -1) {
PLOG(ERROR) << "Failed to redirect stderr of " << filename;
_exit(127);
return false;
}
TEMP_FAILURE_RETRY(close(pipe_fds[1]));
if (execve(filename, argv, envp) == -1) {
PLOG(ERROR) << "Failed to execve " << filename;
return false;
}
// Unreachable because execve will have succeeded and replaced this code
// with child process's code.
_exit(127);
return false;
} else {
// fork succeeded -- this is executing in the original/parent process
// Close the pipe FD not used by this process
TEMP_FAILURE_RETRY(close(pipe_fds[1]));
// Log the redirected output of the child process.
// It's unfortunate that there's no standard way to obtain an istream for a file descriptor.
// As a result, we're buffering all output and logging it in one go at the end of the
// invocation, instead of logging it as it comes in.
const int child_out_fd = pipe_fds[0];
std::string child_output;
if (!android::base::ReadFdToString(child_out_fd, &child_output)) {
PLOG(ERROR) << "Failed to capture full output of " << filename;
}
TEMP_FAILURE_RETRY(close(child_out_fd));
if (!child_output.empty()) {
// Log captured output, line by line, because LOG expects to be invoked for each line
std::istringstream in(child_output);
std::string line;
while (std::getline(in, line)) {
LOG(ERROR) << filename << ": " << line;
}
}
// Wait for child to terminate
int status;
if (TEMP_FAILURE_RETRY(waitpid(child_pid, &status, 0)) != child_pid) {
PLOG(ERROR) << "Failed to wait for " << filename;
return false;
}
if (WIFEXITED(status)) {
int status_code = WEXITSTATUS(status);
if (status_code == 0) {
return true;
} else {
LOG(ERROR) << filename << " exited with status " << status_code;
}
} else if (WIFSIGNALED(status)) {
LOG(ERROR) << filename << " killed by signal " << WTERMSIG(status);
} else if (WIFSTOPPED(status)) {
LOG(ERROR) << filename << " stopped by signal " << WSTOPSIG(status);
} else {
LOG(ERROR) << "waitpid for " << filename << " returned unexpected status: " << status;
}
return false;
}
}
Use precompiled sepolicy when available NOTE: This change affects only devices which use SELinux kernel policy split over system and vendor directories/partitions. Prior to this change, init compiled sepolicy from *.cil files on every boot, thus slowing boot down by about 400 ms. This change enables init to skip the step compilation and thus avoid spending the 400 ms. The skipping occurs only if the device's vendor partition includes an acceptable precompiled policy file. If no acceptable policy is found, the compilation step takes place same as before. Because such devices support updating system and vendor partitions independently of each other, the vendor partition's precompiled policy is only used if it was compiled against the system partition's policy. The exact mechanism is that both partitions include a file containing the SHA-256 digest of the system partition's policy (plat_sepolicy.cil) and the precompiled policy is considered usable only if the two digests are identical. Test: Device with monolithic policy boots up just fine Test: Device with split policy and with matching precompiled policy boots up just fine and getprop ro.boottime.init.selinux returns a number below 100 ms. No "Compiling SELinux policy" message in dmesg. Test: Device with split policy and with non-matching precompiled policy boots up just fine and getpropr ro.boottime.init.selinux returns a number above 400 ms. There is a "Compiling SELinux policy" message in dmesg. The non-matching policy was obtained by adding an allow rule to system/sepolicy, building a new system image using make systemimage and then flashing it onto the device. Bug: 31363362 Change-Id: Ic2e81a83051689b5cd5ef1299ba6aaa1b1df1bdc
2017-03-07 23:12:01 +01:00
static bool read_first_line(const char* file, std::string* line) {
line->clear();
std::string contents;
if (!android::base::ReadFileToString(file, &contents, true /* follow symlinks */)) {
return false;
}
std::istringstream in(contents);
std::getline(in, *line);
return true;
}
static bool selinux_find_precompiled_split_policy(std::string* file) {
file->clear();
static constexpr const char precompiled_sepolicy[] = "/vendor/etc/selinux/precompiled_sepolicy";
if (access(precompiled_sepolicy, R_OK) == -1) {
return false;
}
std::string actual_plat_id;
if (!read_first_line("/system/etc/selinux/plat_and_mapping_sepolicy.cil.sha256",
&actual_plat_id)) {
PLOG(INFO) << "Failed to read "
"/system/etc/selinux/plat_and_mapping_sepolicy.cil.sha256";
Use precompiled sepolicy when available NOTE: This change affects only devices which use SELinux kernel policy split over system and vendor directories/partitions. Prior to this change, init compiled sepolicy from *.cil files on every boot, thus slowing boot down by about 400 ms. This change enables init to skip the step compilation and thus avoid spending the 400 ms. The skipping occurs only if the device's vendor partition includes an acceptable precompiled policy file. If no acceptable policy is found, the compilation step takes place same as before. Because such devices support updating system and vendor partitions independently of each other, the vendor partition's precompiled policy is only used if it was compiled against the system partition's policy. The exact mechanism is that both partitions include a file containing the SHA-256 digest of the system partition's policy (plat_sepolicy.cil) and the precompiled policy is considered usable only if the two digests are identical. Test: Device with monolithic policy boots up just fine Test: Device with split policy and with matching precompiled policy boots up just fine and getprop ro.boottime.init.selinux returns a number below 100 ms. No "Compiling SELinux policy" message in dmesg. Test: Device with split policy and with non-matching precompiled policy boots up just fine and getpropr ro.boottime.init.selinux returns a number above 400 ms. There is a "Compiling SELinux policy" message in dmesg. The non-matching policy was obtained by adding an allow rule to system/sepolicy, building a new system image using make systemimage and then flashing it onto the device. Bug: 31363362 Change-Id: Ic2e81a83051689b5cd5ef1299ba6aaa1b1df1bdc
2017-03-07 23:12:01 +01:00
return false;
}
std::string precompiled_plat_id;
if (!read_first_line("/vendor/etc/selinux/precompiled_sepolicy.plat_and_mapping.sha256",
Use precompiled sepolicy when available NOTE: This change affects only devices which use SELinux kernel policy split over system and vendor directories/partitions. Prior to this change, init compiled sepolicy from *.cil files on every boot, thus slowing boot down by about 400 ms. This change enables init to skip the step compilation and thus avoid spending the 400 ms. The skipping occurs only if the device's vendor partition includes an acceptable precompiled policy file. If no acceptable policy is found, the compilation step takes place same as before. Because such devices support updating system and vendor partitions independently of each other, the vendor partition's precompiled policy is only used if it was compiled against the system partition's policy. The exact mechanism is that both partitions include a file containing the SHA-256 digest of the system partition's policy (plat_sepolicy.cil) and the precompiled policy is considered usable only if the two digests are identical. Test: Device with monolithic policy boots up just fine Test: Device with split policy and with matching precompiled policy boots up just fine and getprop ro.boottime.init.selinux returns a number below 100 ms. No "Compiling SELinux policy" message in dmesg. Test: Device with split policy and with non-matching precompiled policy boots up just fine and getpropr ro.boottime.init.selinux returns a number above 400 ms. There is a "Compiling SELinux policy" message in dmesg. The non-matching policy was obtained by adding an allow rule to system/sepolicy, building a new system image using make systemimage and then flashing it onto the device. Bug: 31363362 Change-Id: Ic2e81a83051689b5cd5ef1299ba6aaa1b1df1bdc
2017-03-07 23:12:01 +01:00
&precompiled_plat_id)) {
PLOG(INFO) << "Failed to read "
"/vendor/etc/selinux/"
"precompiled_sepolicy.plat_and_mapping.sha256";
Use precompiled sepolicy when available NOTE: This change affects only devices which use SELinux kernel policy split over system and vendor directories/partitions. Prior to this change, init compiled sepolicy from *.cil files on every boot, thus slowing boot down by about 400 ms. This change enables init to skip the step compilation and thus avoid spending the 400 ms. The skipping occurs only if the device's vendor partition includes an acceptable precompiled policy file. If no acceptable policy is found, the compilation step takes place same as before. Because such devices support updating system and vendor partitions independently of each other, the vendor partition's precompiled policy is only used if it was compiled against the system partition's policy. The exact mechanism is that both partitions include a file containing the SHA-256 digest of the system partition's policy (plat_sepolicy.cil) and the precompiled policy is considered usable only if the two digests are identical. Test: Device with monolithic policy boots up just fine Test: Device with split policy and with matching precompiled policy boots up just fine and getprop ro.boottime.init.selinux returns a number below 100 ms. No "Compiling SELinux policy" message in dmesg. Test: Device with split policy and with non-matching precompiled policy boots up just fine and getpropr ro.boottime.init.selinux returns a number above 400 ms. There is a "Compiling SELinux policy" message in dmesg. The non-matching policy was obtained by adding an allow rule to system/sepolicy, building a new system image using make systemimage and then flashing it onto the device. Bug: 31363362 Change-Id: Ic2e81a83051689b5cd5ef1299ba6aaa1b1df1bdc
2017-03-07 23:12:01 +01:00
return false;
}
if ((actual_plat_id.empty()) || (actual_plat_id != precompiled_plat_id)) {
return false;
}
*file = precompiled_sepolicy;
return true;
}
static constexpr const char plat_policy_cil_file[] = "/system/etc/selinux/plat_sepolicy.cil";
static bool selinux_is_split_policy_device() { return access(plat_policy_cil_file, R_OK) != -1; }
/*
* Loads SELinux policy split across platform/system and non-platform/vendor files.
*
* Returns true upon success, false otherwise (failure cause is logged).
*/
static bool selinux_load_split_policy() {
// IMPLEMENTATION NOTE: Split policy consists of three CIL files:
// * platform -- policy needed due to logic contained in the system image,
// * non-platform -- policy needed due to logic contained in the vendor image,
// * mapping -- mapping policy which helps preserve forward-compatibility of non-platform policy
// with newer versions of platform policy.
//
// secilc is invoked to compile the above three policy files into a single monolithic policy
// file. This file is then loaded into the kernel.
Use precompiled sepolicy when available NOTE: This change affects only devices which use SELinux kernel policy split over system and vendor directories/partitions. Prior to this change, init compiled sepolicy from *.cil files on every boot, thus slowing boot down by about 400 ms. This change enables init to skip the step compilation and thus avoid spending the 400 ms. The skipping occurs only if the device's vendor partition includes an acceptable precompiled policy file. If no acceptable policy is found, the compilation step takes place same as before. Because such devices support updating system and vendor partitions independently of each other, the vendor partition's precompiled policy is only used if it was compiled against the system partition's policy. The exact mechanism is that both partitions include a file containing the SHA-256 digest of the system partition's policy (plat_sepolicy.cil) and the precompiled policy is considered usable only if the two digests are identical. Test: Device with monolithic policy boots up just fine Test: Device with split policy and with matching precompiled policy boots up just fine and getprop ro.boottime.init.selinux returns a number below 100 ms. No "Compiling SELinux policy" message in dmesg. Test: Device with split policy and with non-matching precompiled policy boots up just fine and getpropr ro.boottime.init.selinux returns a number above 400 ms. There is a "Compiling SELinux policy" message in dmesg. The non-matching policy was obtained by adding an allow rule to system/sepolicy, building a new system image using make systemimage and then flashing it onto the device. Bug: 31363362 Change-Id: Ic2e81a83051689b5cd5ef1299ba6aaa1b1df1bdc
2017-03-07 23:12:01 +01:00
// Load precompiled policy from vendor image, if a matching policy is found there. The policy
// must match the platform policy on the system image.
std::string precompiled_sepolicy_file;
if (selinux_find_precompiled_split_policy(&precompiled_sepolicy_file)) {
android::base::unique_fd fd(
open(precompiled_sepolicy_file.c_str(), O_RDONLY | O_CLOEXEC | O_BINARY));
if (fd != -1) {
if (selinux_android_load_policy_from_fd(fd, precompiled_sepolicy_file.c_str()) < 0) {
LOG(ERROR) << "Failed to load SELinux policy from " << precompiled_sepolicy_file;
return false;
}
return true;
}
}
// No suitable precompiled policy could be loaded
LOG(INFO) << "Compiling SELinux policy";
// Determine the highest policy language version supported by the kernel
set_selinuxmnt("/sys/fs/selinux");
int max_policy_version = security_policyvers();
if (max_policy_version == -1) {
PLOG(ERROR) << "Failed to determine highest policy version supported by kernel";
return false;
}
// We store the output of the compilation on /dev because this is the most convenient tmpfs
// storage mount available this early in the boot sequence.
char compiled_sepolicy[] = "/dev/sepolicy.XXXXXX";
android::base::unique_fd compiled_sepolicy_fd(mkostemp(compiled_sepolicy, O_CLOEXEC));
if (compiled_sepolicy_fd < 0) {
PLOG(ERROR) << "Failed to create temporary file " << compiled_sepolicy;
return false;
}
// clang-format off
const char* compile_args[] = {
"/system/bin/secilc",
plat_policy_cil_file,
"-M", "true",
// Target the highest policy language version supported by the kernel
"-c", std::to_string(max_policy_version).c_str(),
"/system/etc/selinux/mapping_sepolicy.cil",
"/vendor/etc/selinux/nonplat_sepolicy.cil",
"-o", compiled_sepolicy,
// We don't care about file_contexts output by the compiler
"-f", "/sys/fs/selinux/null", // /dev/null is not yet available
nullptr};
// clang-format on
if (!fork_execve_and_wait_for_completion(compile_args[0], (char**)compile_args, (char**)ENV)) {
unlink(compiled_sepolicy);
return false;
}
unlink(compiled_sepolicy);
LOG(INFO) << "Loading compiled SELinux policy";
if (selinux_android_load_policy_from_fd(compiled_sepolicy_fd, compiled_sepolicy) < 0) {
LOG(ERROR) << "Failed to load SELinux policy from " << compiled_sepolicy;
return false;
}
return true;
}
/*
* Loads SELinux policy from a monolithic file.
*
* Returns true upon success, false otherwise (failure cause is logged).
*/
static bool selinux_load_monolithic_policy() {
LOG(VERBOSE) << "Loading SELinux policy from monolithic file";
if (selinux_android_load_policy() < 0) {
PLOG(ERROR) << "Failed to load monolithic SELinux policy";
return false;
}
return true;
}
/*
* Loads SELinux policy into the kernel.
*
* Returns true upon success, false otherwise (failure cause is logged).
*/
static bool selinux_load_policy() {
return selinux_is_split_policy_device() ? selinux_load_split_policy()
: selinux_load_monolithic_policy();
}
static void selinux_initialize(bool in_kernel_domain) {
Timer t;
selinux_callback cb;
cb.func_log = selinux_klog_callback;
selinux_set_callback(SELINUX_CB_LOG, cb);
cb.func_audit = audit_callback;
selinux_set_callback(SELINUX_CB_AUDIT, cb);
if (in_kernel_domain) {
LOG(INFO) << "Loading SELinux policy";
if (!selinux_load_policy()) {
panic();
}
bool kernel_enforcing = (security_getenforce() == 1);
bool is_enforcing = selinux_is_enforcing();
if (kernel_enforcing != is_enforcing) {
if (security_setenforce(is_enforcing)) {
PLOG(ERROR) << "security_setenforce(%s) failed" << (is_enforcing ? "true" : "false");
security_failure();
}
}
std::string err;
if (!WriteFile("/sys/fs/selinux/checkreqprot", "0", &err)) {
LOG(ERROR) << err;
security_failure();
}
Replace the "coldboot" timeout with a property. Also rename init's existing boot-time related properties so they're all "ro.*" properties. Example result: # Three properties showing when init started... [ro.boottime.init]: [5294587604] # ...how long it waited for ueventd... [ro.boottime.init.cold_boot_wait]: [646956470] # ...and how long SELinux initialization took... [ro.boottime.init.selinux]: [45742921] # Plus one property for each service, showing when it first started. [ro.boottime.InputEventFind]: [10278767840] [ro.boottime.adbd]: [8359267180] [ro.boottime.atfwd]: [10338554773] [ro.boottime.audioserver]: [10298157478] [ro.boottime.bootanim]: [9323670089] [ro.boottime.cameraserver]: [10299402321] [ro.boottime.cnd]: [10335931856] [ro.boottime.debuggerd]: [7001352774] [ro.boottime.debuggerd64]: [7002261785] [ro.boottime.drm]: [10301082113] [ro.boottime.fingerprintd]: [10331443314] [ro.boottime.flash-nanohub-fw]: [6995265534] [ro.boottime.gatekeeperd]: [10340355242] [ro.boottime.healthd]: [7856893380] [ro.boottime.hwservicemanager]: [7856051088] [ro.boottime.imscmservice]: [10290530758] [ro.boottime.imsdatadaemon]: [10358136702] [ro.boottime.imsqmidaemon]: [10289084872] [ro.boottime.installd]: [10303296020] [ro.boottime.irsc_util]: [10279807632] [ro.boottime.keystore]: [10305034093] [ro.boottime.lmkd]: [7863506714] [ro.boottime.loc_launcher]: [10324525241] [ro.boottime.logd]: [6526221633] [ro.boottime.logd-reinit]: [7850662702] [ro.boottime.mcfg-sh]: [10337268315] [ro.boottime.media]: [10312152687] [ro.boottime.mediacodec]: [10306852530] [ro.boottime.mediadrm]: [10308707999] [ro.boottime.mediaextractor]: [10310681177] [ro.boottime.msm_irqbalance]: [7862451974] [ro.boottime.netd]: [10313523104] [ro.boottime.netmgrd]: [10285009351] [ro.boottime.oem_qmi_server]: [10293329092] [ro.boottime.per_mgr]: [7857915776] [ro.boottime.per_proxy]: [8335121605] [ro.boottime.perfd]: [10283443101] [ro.boottime.qcamerasvr]: [10329644772] [ro.boottime.qmuxd]: [10282346643] [ro.boottime.qseecomd]: [6855708593] [ro.boottime.qti]: [10286196851] [ro.boottime.ril-daemon]: [10314933677] [ro.boottime.rmt_storage]: [7859105047] [ro.boottime.servicemanager]: [7864555881] [ro.boottime.ss_ramdump]: [8337634938] [ro.boottime.ssr_setup]: [8336268324] [ro.boottime.surfaceflinger]: [7866921402] [ro.boottime.thermal-engine]: [10281249924] [ro.boottime.time_daemon]: [10322006542] [ro.boottime.ueventd]: [5618663938] [ro.boottime.vold]: [7003493920] [ro.boottime.wificond]: [10316641073] [ro.boottime.wpa_supplicant]: [18959816881] [ro.boottime.zygote]: [10295295029] [ro.boottime.zygote_secondary]: [10296637269] Bug: http://b/31800756 Test: boots Change-Id: I094cce0c1bab9406d950ca94212689dc2e15dba5
2016-11-29 20:20:58 +01:00
// init's first stage can't set properties, so pass the time to the second stage.
setenv("INIT_SELINUX_TOOK", std::to_string(t.duration().count()).c_str(), 1);
} else {
selinux_init_all_handles();
}
}
// The files and directories that were created before initial sepolicy load or
// files on ramdisk need to have their security context restored to the proper
// value. This must happen before /dev is populated by ueventd.
static void selinux_restore_context() {
LOG(INFO) << "Running restorecon...";
selinux_android_restorecon("/dev", 0);
selinux_android_restorecon("/dev/kmsg", 0);
if constexpr (WORLD_WRITABLE_KMSG) {
selinux_android_restorecon("/dev/kmsg_debug", 0);
}
selinux_android_restorecon("/dev/socket", 0);
selinux_android_restorecon("/dev/random", 0);
selinux_android_restorecon("/dev/urandom", 0);
selinux_android_restorecon("/dev/__properties__", 0);
selinux_android_restorecon("/plat_property_contexts", 0);
selinux_android_restorecon("/nonplat_property_contexts", 0);
selinux_android_restorecon("/dev/block", SELINUX_ANDROID_RESTORECON_RECURSE);
selinux_android_restorecon("/dev/device-mapper", 0);
selinux_android_restorecon("/sbin/mke2fs_static", 0);
selinux_android_restorecon("/sbin/e2fsdroid_static", 0);
}
// Set the UDC controller for the ConfigFS USB Gadgets.
// Read the UDC controller in use from "/sys/class/udc".
// In case of multiple UDC controllers select the first one.
static void set_usb_controller() {
std::unique_ptr<DIR, decltype(&closedir)>dir(opendir("/sys/class/udc"), closedir);
if (!dir) return;
dirent* dp;
while ((dp = readdir(dir.get())) != nullptr) {
if (dp->d_name[0] == '.') continue;
property_set("sys.usb.controller", dp->d_name);
break;
}
}
static void install_reboot_signal_handlers() {
// Instead of panic'ing the kernel as is the default behavior when init crashes,
// we prefer to reboot to bootloader on development builds, as this will prevent
// boot looping bad configurations and allow both developers and test farms to easily
// recover.
struct sigaction action;
memset(&action, 0, sizeof(action));
sigfillset(&action.sa_mask);
action.sa_handler = [](int) {
// panic() reboots to bootloader
panic();
};
action.sa_flags = SA_RESTART;
sigaction(SIGABRT, &action, nullptr);
sigaction(SIGBUS, &action, nullptr);
sigaction(SIGFPE, &action, nullptr);
sigaction(SIGILL, &action, nullptr);
sigaction(SIGSEGV, &action, nullptr);
#if defined(SIGSTKFLT)
sigaction(SIGSTKFLT, &action, nullptr);
#endif
sigaction(SIGSYS, &action, nullptr);
sigaction(SIGTRAP, &action, nullptr);
}
int main(int argc, char** argv) {
if (!strcmp(basename(argv[0]), "ueventd")) {
return ueventd_main(argc, argv);
}
if (!strcmp(basename(argv[0]), "watchdogd")) {
return watchdogd_main(argc, argv);
}
if (REBOOT_BOOTLOADER_ON_PANIC) {
install_reboot_signal_handlers();
}
add_environment("PATH", _PATH_DEFPATH);
bool is_first_stage = (getenv("INIT_SECOND_STAGE") == nullptr);
if (is_first_stage) {
boot_clock::time_point start_time = boot_clock::now();
// Clear the umask.
umask(0);
// Get the basic filesystem setup we need put together in the initramdisk
// on / and then we'll let the rc file figure out the rest.
mount("tmpfs", "/dev", "tmpfs", MS_NOSUID, "mode=0755");
mkdir("/dev/pts", 0755);
mkdir("/dev/socket", 0755);
mount("devpts", "/dev/pts", "devpts", 0, NULL);
#define MAKE_STR(x) __STRING(x)
mount("proc", "/proc", "proc", 0, "hidepid=2,gid=" MAKE_STR(AID_READPROC));
// Don't expose the raw commandline to unprivileged processes.
chmod("/proc/cmdline", 0440);
gid_t groups[] = { AID_READPROC };
setgroups(arraysize(groups), groups);
mount("sysfs", "/sys", "sysfs", 0, NULL);
mount("selinuxfs", "/sys/fs/selinux", "selinuxfs", 0, NULL);
mknod("/dev/kmsg", S_IFCHR | 0600, makedev(1, 11));
if constexpr (WORLD_WRITABLE_KMSG) {
mknod("/dev/kmsg_debug", S_IFCHR | 0622, makedev(1, 11));
}
mknod("/dev/random", S_IFCHR | 0666, makedev(1, 8));
mknod("/dev/urandom", S_IFCHR | 0666, makedev(1, 9));
2008-10-21 16:00:00 +02:00
// Now that tmpfs is mounted on /dev and we have /dev/kmsg, we can actually
// talk to the outside world...
InitKernelLogging(argv);
LOG(INFO) << "init first stage started!";
if (!DoFirstStageMount()) {
LOG(ERROR) << "Failed to mount required partitions early ...";
panic();
}
SetInitAvbVersionInRecovery();
// Enable seccomp if global boot option was passed (otherwise it is enabled in zygote).
global_seccomp();
// Set up SELinux, loading the SELinux policy.
selinux_initialize(true);
// We're in the kernel domain, so re-exec init to transition to the init domain now
// that the SELinux policy has been loaded.
if (selinux_android_restorecon("/init", 0) == -1) {
PLOG(ERROR) << "restorecon failed";
security_failure();
}
setenv("INIT_SECOND_STAGE", "true", 1);
static constexpr uint32_t kNanosecondsPerMillisecond = 1e6;
uint64_t start_ms = start_time.time_since_epoch().count() / kNanosecondsPerMillisecond;
setenv("INIT_STARTED_AT", std::to_string(start_ms).c_str(), 1);
char* path = argv[0];
char* args[] = { path, nullptr };
execv(path, args);
// execv() only returns if an error happened, in which case we
// panic and never fall through this conditional.
PLOG(ERROR) << "execv(\"" << path << "\") failed";
security_failure();
}
// At this point we're in the second stage of init.
InitKernelLogging(argv);
LOG(INFO) << "init second stage started!";
// Set up a session keyring that all processes will have access to. It
// will hold things like FBE encryption keys. No process should override
// its session keyring.
keyctl_get_keyring_ID(KEY_SPEC_SESSION_KEYRING, 1);
// Indicate that booting is in progress to background fw loaders, etc.
close(open("/dev/.booting", O_WRONLY | O_CREAT | O_CLOEXEC, 0000));
property_init();
Replace the "coldboot" timeout with a property. Also rename init's existing boot-time related properties so they're all "ro.*" properties. Example result: # Three properties showing when init started... [ro.boottime.init]: [5294587604] # ...how long it waited for ueventd... [ro.boottime.init.cold_boot_wait]: [646956470] # ...and how long SELinux initialization took... [ro.boottime.init.selinux]: [45742921] # Plus one property for each service, showing when it first started. [ro.boottime.InputEventFind]: [10278767840] [ro.boottime.adbd]: [8359267180] [ro.boottime.atfwd]: [10338554773] [ro.boottime.audioserver]: [10298157478] [ro.boottime.bootanim]: [9323670089] [ro.boottime.cameraserver]: [10299402321] [ro.boottime.cnd]: [10335931856] [ro.boottime.debuggerd]: [7001352774] [ro.boottime.debuggerd64]: [7002261785] [ro.boottime.drm]: [10301082113] [ro.boottime.fingerprintd]: [10331443314] [ro.boottime.flash-nanohub-fw]: [6995265534] [ro.boottime.gatekeeperd]: [10340355242] [ro.boottime.healthd]: [7856893380] [ro.boottime.hwservicemanager]: [7856051088] [ro.boottime.imscmservice]: [10290530758] [ro.boottime.imsdatadaemon]: [10358136702] [ro.boottime.imsqmidaemon]: [10289084872] [ro.boottime.installd]: [10303296020] [ro.boottime.irsc_util]: [10279807632] [ro.boottime.keystore]: [10305034093] [ro.boottime.lmkd]: [7863506714] [ro.boottime.loc_launcher]: [10324525241] [ro.boottime.logd]: [6526221633] [ro.boottime.logd-reinit]: [7850662702] [ro.boottime.mcfg-sh]: [10337268315] [ro.boottime.media]: [10312152687] [ro.boottime.mediacodec]: [10306852530] [ro.boottime.mediadrm]: [10308707999] [ro.boottime.mediaextractor]: [10310681177] [ro.boottime.msm_irqbalance]: [7862451974] [ro.boottime.netd]: [10313523104] [ro.boottime.netmgrd]: [10285009351] [ro.boottime.oem_qmi_server]: [10293329092] [ro.boottime.per_mgr]: [7857915776] [ro.boottime.per_proxy]: [8335121605] [ro.boottime.perfd]: [10283443101] [ro.boottime.qcamerasvr]: [10329644772] [ro.boottime.qmuxd]: [10282346643] [ro.boottime.qseecomd]: [6855708593] [ro.boottime.qti]: [10286196851] [ro.boottime.ril-daemon]: [10314933677] [ro.boottime.rmt_storage]: [7859105047] [ro.boottime.servicemanager]: [7864555881] [ro.boottime.ss_ramdump]: [8337634938] [ro.boottime.ssr_setup]: [8336268324] [ro.boottime.surfaceflinger]: [7866921402] [ro.boottime.thermal-engine]: [10281249924] [ro.boottime.time_daemon]: [10322006542] [ro.boottime.ueventd]: [5618663938] [ro.boottime.vold]: [7003493920] [ro.boottime.wificond]: [10316641073] [ro.boottime.wpa_supplicant]: [18959816881] [ro.boottime.zygote]: [10295295029] [ro.boottime.zygote_secondary]: [10296637269] Bug: http://b/31800756 Test: boots Change-Id: I094cce0c1bab9406d950ca94212689dc2e15dba5
2016-11-29 20:20:58 +01:00
// If arguments are passed both on the command line and in DT,
// properties set in DT always have priority over the command-line ones.
process_kernel_dt();
process_kernel_cmdline();
// Propagate the kernel variables to internal variables
// used by init as well as the current required properties.
export_kernel_boot_props();
// Make the time that init started available for bootstat to log.
property_set("ro.boottime.init", getenv("INIT_STARTED_AT"));
property_set("ro.boottime.init.selinux", getenv("INIT_SELINUX_TOOK"));
// Set libavb version for Framework-only OTA match in Treble build.
const char* avb_version = getenv("INIT_AVB_VERSION");
if (avb_version) property_set("ro.boot.avb_version", avb_version);
// Clean up our environment.
unsetenv("INIT_SECOND_STAGE");
unsetenv("INIT_STARTED_AT");
unsetenv("INIT_SELINUX_TOOK");
unsetenv("INIT_AVB_VERSION");
// Now set up SELinux for second stage.
selinux_initialize(false);
selinux_restore_context();
epoll_fd = epoll_create1(EPOLL_CLOEXEC);
if (epoll_fd == -1) {
PLOG(ERROR) << "epoll_create1 failed";
exit(1);
}
signal_handler_init();
property_load_boot_defaults();
export_oem_lock_status();
start_property_service();
set_usb_controller();
const BuiltinFunctionMap function_map;
Action::set_function_map(&function_map);
ActionManager& am = ActionManager::GetInstance();
ServiceManager& sm = ServiceManager::GetInstance();
Parser& parser = Parser::GetInstance();
parser.AddSectionParser("service", std::make_unique<ServiceParser>(&sm));
parser.AddSectionParser("on", std::make_unique<ActionParser>(&am));
parser.AddSectionParser("import", std::make_unique<ImportParser>(&parser));
std::string bootscript = GetProperty("ro.boot.init_rc", "");
if (bootscript.empty()) {
parser.ParseConfig("/init.rc");
parser.set_is_system_etc_init_loaded(
parser.ParseConfig("/system/etc/init"));
parser.set_is_vendor_etc_init_loaded(
parser.ParseConfig("/vendor/etc/init"));
parser.set_is_odm_etc_init_loaded(parser.ParseConfig("/odm/etc/init"));
} else {
parser.ParseConfig(bootscript);
parser.set_is_system_etc_init_loaded(true);
parser.set_is_vendor_etc_init_loaded(true);
parser.set_is_odm_etc_init_loaded(true);
}
2008-10-21 16:00:00 +02:00
// Turning this on and letting the INFO logging be discarded adds 0.2s to
// Nexus 9 boot time, so it's disabled by default.
if (false) DumpState();
am.QueueEventTrigger("early-init");
2008-10-21 16:00:00 +02:00
// Queue an action that waits for coldboot done so we know ueventd has set up all of /dev...
am.QueueBuiltinAction(wait_for_coldboot_done_action, "wait_for_coldboot_done");
// ... so that we can start queuing up actions that require stuff from /dev.
am.QueueBuiltinAction(mix_hwrng_into_linux_rng_action, "mix_hwrng_into_linux_rng");
am.QueueBuiltinAction(set_mmap_rnd_bits_action, "set_mmap_rnd_bits");
am.QueueBuiltinAction(set_kptr_restrict_action, "set_kptr_restrict");
am.QueueBuiltinAction(keychord_init_action, "keychord_init");
am.QueueBuiltinAction(console_init_action, "console_init");
2008-10-21 16:00:00 +02:00
// Trigger all the boot actions to get us started.
am.QueueEventTrigger("init");
// Repeat mix_hwrng_into_linux_rng in case /dev/hw_random or /dev/random
// wasn't ready immediately after wait_for_coldboot_done
am.QueueBuiltinAction(mix_hwrng_into_linux_rng_action, "mix_hwrng_into_linux_rng");
2008-10-21 16:00:00 +02:00
// Don't mount filesystems or start core system services in charger mode.
std::string bootmode = GetProperty("ro.bootmode", "");
if (bootmode == "charger") {
am.QueueEventTrigger("charger");
} else {
am.QueueEventTrigger("late-init");
}
2008-10-21 16:00:00 +02:00
// Run all property triggers based on current state of the properties.
am.QueueBuiltinAction(queue_property_triggers_action, "queue_property_triggers");
while (true) {
// By default, sleep until something happens.
int epoll_timeout_ms = -1;
if (!(waiting_for_prop || sm.IsWaitingForExec())) {
am.ExecuteOneCommand();
}
if (!(waiting_for_prop || sm.IsWaitingForExec())) {
if (!shutting_down) restart_processes();
2008-10-21 16:00:00 +02:00
// If there's a process that needs restarting, wake up in time for that.
if (process_needs_restart_at != 0) {
epoll_timeout_ms = (process_needs_restart_at - time(nullptr)) * 1000;
if (epoll_timeout_ms < 0) epoll_timeout_ms = 0;
}
// If there's more work to do, wake up again immediately.
if (am.HasMoreCommands()) epoll_timeout_ms = 0;
}
epoll_event ev;
int nr = TEMP_FAILURE_RETRY(epoll_wait(epoll_fd, &ev, 1, epoll_timeout_ms));
if (nr == -1) {
PLOG(ERROR) << "epoll_wait failed";
} else if (nr == 1) {
((void (*)()) ev.data.ptr)();
2008-10-21 16:00:00 +02:00
}
}
return 0;
}
} // namespace init
} // namespace android
int main(int argc, char** argv) {
android::init::main(argc, argv);
}