platform_system_core/adb/adbd_auth.cpp

223 lines
6.4 KiB
C++
Raw Normal View History

adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
/*
* Copyright (C) 2012 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#define TRACE_TAG AUTH
#include "adb.h"
#include "adb_auth.h"
#include "fdevent.h"
#include "sysdeps.h"
#include "transport.h"
#include <resolv.h>
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
#include <stdio.h>
#include <string.h>
#include <memory>
#include <android-base/file.h>
#include <android-base/strings.h>
#include <crypto_utils/android_pubkey.h>
#include <openssl/obj_mac.h>
#include <openssl/rsa.h>
#include <openssl/sha.h>
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
static fdevent listener_fde;
static fdevent framework_fde;
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
static int framework_fd = -1;
static void usb_disconnected(void* unused, atransport* t);
static struct adisconnect usb_disconnect = { usb_disconnected, nullptr};
static atransport* usb_transport;
static bool needs_retry = false;
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
bool auth_required = true;
bool adbd_auth_verify(uint8_t* token, size_t token_size, uint8_t* sig, int sig_len) {
static constexpr const char* key_paths[] = { "/adb_keys", "/data/misc/adb/adb_keys", nullptr };
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
for (const auto& path : key_paths) {
if (access(path, R_OK) == 0) {
LOG(INFO) << "Loading keys from " << path;
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
std::string content;
if (!android::base::ReadFileToString(path, &content)) {
PLOG(ERROR) << "Couldn't read " << path;
continue;
}
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
for (const auto& line : android::base::Split(content, "\n")) {
// TODO: do we really have to support both ' ' and '\t'?
char* sep = strpbrk(const_cast<char*>(line.c_str()), " \t");
if (sep) *sep = '\0';
// b64_pton requires one additional byte in the target buffer for
// decoding to succeed. See http://b/28035006 for details.
uint8_t keybuf[ANDROID_PUBKEY_ENCODED_SIZE + 1];
if (__b64_pton(line.c_str(), keybuf, sizeof(keybuf)) != ANDROID_PUBKEY_ENCODED_SIZE) {
LOG(ERROR) << "Invalid base64 key " << line.c_str() << " in " << path;
continue;
}
RSA* key = nullptr;
if (!android_pubkey_decode(keybuf, ANDROID_PUBKEY_ENCODED_SIZE, &key)) {
LOG(ERROR) << "Failed to parse key " << line.c_str() << " in " << path;
continue;
}
bool verified = (RSA_verify(NID_sha1, token, token_size, sig, sig_len, key) == 1);
RSA_free(key);
if (verified) return true;
}
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
}
}
return false;
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
}
static bool adbd_auth_generate_token(void* token, size_t token_size) {
FILE* fp = fopen("/dev/urandom", "re");
if (!fp) return false;
bool okay = (fread(token, token_size, 1, fp) == 1);
fclose(fp);
return okay;
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
}
static void usb_disconnected(void* unused, atransport* t) {
LOG(INFO) << "USB disconnect";
usb_transport = NULL;
needs_retry = false;
}
static void framework_disconnected() {
LOG(INFO) << "Framework disconnect";
fdevent_remove(&framework_fde);
framework_fd = -1;
}
static void adbd_auth_event(int fd, unsigned events, void*) {
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
if (events & FDE_READ) {
char response[2];
int ret = unix_read(fd, response, sizeof(response));
if (ret <= 0) {
framework_disconnected();
} else if (ret == 2 && response[0] == 'O' && response[1] == 'K') {
if (usb_transport) {
adbd_auth_verified(usb_transport);
}
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
}
}
}
void adbd_auth_confirm_key(unsigned char* key, size_t len, atransport* t) {
if (!usb_transport) {
usb_transport = t;
t->AddDisconnect(&usb_disconnect);
}
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
if (framework_fd < 0) {
LOG(ERROR) << "Client not connected";
needs_retry = true;
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
return;
}
if (key[len - 1] != '\0') {
LOG(ERROR) << "Key must be a null-terminated string";
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
return;
}
char msg[MAX_PAYLOAD_V1];
int msg_len = snprintf(msg, sizeof(msg), "PK%s", key);
if (msg_len >= static_cast<int>(sizeof(msg))) {
LOG(ERROR) << "Key too long (" << msg_len << ")";
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
return;
}
LOG(DEBUG) << "Sending '" << msg << "'";
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
if (unix_write(framework_fd, msg, msg_len) == -1) {
PLOG(ERROR) << "Failed to write PK";
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
return;
}
}
static void adbd_auth_listener(int fd, unsigned events, void* data) {
int s = adb_socket_accept(fd, nullptr, nullptr);
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
if (s < 0) {
PLOG(ERROR) << "Failed to accept";
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
return;
}
if (framework_fd >= 0) {
LOG(WARNING) << "adb received framework auth socket connection again";
framework_disconnected();
}
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
framework_fd = s;
fdevent_install(&framework_fde, framework_fd, adbd_auth_event, nullptr);
fdevent_add(&framework_fde, FDE_READ);
if (needs_retry) {
needs_retry = false;
send_auth_request(usb_transport);
}
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
}
void adbd_cloexec_auth_socket() {
int fd = android_get_control_socket("adbd");
if (fd == -1) {
PLOG(ERROR) << "Failed to get adbd socket";
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
return;
}
fcntl(fd, F_SETFD, FD_CLOEXEC);
}
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
void adbd_auth_init(void) {
int fd = android_get_control_socket("adbd");
if (fd == -1) {
PLOG(ERROR) << "Failed to get adbd socket";
return;
}
if (listen(fd, 4) == -1) {
PLOG(ERROR) << "Failed to listen on '" << fd << "'";
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
return;
}
fdevent_install(&listener_fde, fd, adbd_auth_listener, NULL);
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
fdevent_add(&listener_fde, FDE_READ);
}
void send_auth_request(atransport* t) {
LOG(INFO) << "Calling send_auth_request...";
if (!adbd_auth_generate_token(t->token, sizeof(t->token))) {
PLOG(ERROR) << "Error generating token";
return;
}
apacket* p = get_apacket();
memcpy(p->data, t->token, sizeof(t->token));
p->msg.command = A_AUTH;
p->msg.arg0 = ADB_AUTH_TOKEN;
p->msg.data_length = sizeof(t->token);
send_packet(p, t);
}
void adbd_auth_verified(atransport *t)
{
handle_online(t);
send_connect(t);
}