platform_system_core/adb/transport.cpp

1070 lines
29 KiB
C++
Raw Normal View History

/*
* Copyright (C) 2007 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#define TRACE_TAG TRACE_TRANSPORT
#include "sysdeps.h"
#include "transport.h"
#include <ctype.h>
#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <list>
#include <base/stringprintf.h>
#include "adb.h"
#include "adb_utils.h"
static void transport_unref(atransport *t);
static std::list<atransport*> transport_list;
static std::list<atransport*> pending_list;
ADB_MUTEX_DEFINE( transport_lock );
void kick_transport(atransport* t)
{
if (t && !t->kicked)
{
int kicked;
adb_mutex_lock(&transport_lock);
kicked = t->kicked;
if (!kicked)
t->kicked = 1;
adb_mutex_unlock(&transport_lock);
if (!kicked)
t->kick(t);
}
}
// Each atransport contains a list of adisconnects (t->disconnects).
// An adisconnect contains a link to the next/prev adisconnect, a function
// pointer to a disconnect callback which takes a void* piece of user data and
// the atransport, and some user data for the callback (helpfully named
// "opaque").
//
// The list is circular. New items are added to the entry member of the list
// (t->disconnects) by add_transport_disconnect.
//
// run_transport_disconnects invokes each function in the list.
//
// Gotchas:
// * run_transport_disconnects assumes that t->disconnects is non-null, so
// this can't be run on a zeroed atransport.
// * The callbacks in this list are not removed when called, and this function
// is not guarded against running more than once. As such, ensure that this
// function is not called multiple times on the same atransport.
// TODO(danalbert): Just fix this so that it is guarded once you have tests.
void run_transport_disconnects(atransport* t)
{
adisconnect* dis = t->disconnects.next;
D("%s: run_transport_disconnects\n", t->serial);
while (dis != &t->disconnects) {
adisconnect* next = dis->next;
dis->func( dis->opaque, t );
dis = next;
}
}
static void dump_packet(const char* name, const char* func, apacket* p) {
unsigned command = p->msg.command;
int len = p->msg.data_length;
char cmd[9];
char arg0[12], arg1[12];
int n;
for (n = 0; n < 4; n++) {
int b = (command >> (n*8)) & 255;
if (b < 32 || b >= 127)
break;
cmd[n] = (char)b;
}
if (n == 4) {
cmd[4] = 0;
} else {
/* There is some non-ASCII name in the command, so dump
* the hexadecimal value instead */
snprintf(cmd, sizeof cmd, "%08x", command);
}
if (p->msg.arg0 < 256U)
snprintf(arg0, sizeof arg0, "%d", p->msg.arg0);
else
snprintf(arg0, sizeof arg0, "0x%x", p->msg.arg0);
if (p->msg.arg1 < 256U)
snprintf(arg1, sizeof arg1, "%d", p->msg.arg1);
else
snprintf(arg1, sizeof arg1, "0x%x", p->msg.arg1);
D("%s: %s: [%s] arg0=%s arg1=%s (len=%d) ",
name, func, cmd, arg0, arg1, len);
dump_hex(p->data, len);
}
static int
read_packet(int fd, const char* name, apacket** ppacket)
{
char *p = (char*)ppacket; /* really read a packet address */
int r;
int len = sizeof(*ppacket);
char buff[8];
if (!name) {
snprintf(buff, sizeof buff, "fd=%d", fd);
name = buff;
}
while(len > 0) {
r = adb_read(fd, p, len);
if(r > 0) {
len -= r;
p += r;
} else {
D("%s: read_packet (fd=%d), error ret=%d errno=%d: %s\n", name, fd, r, errno, strerror(errno));
if((r < 0) && (errno == EINTR)) continue;
return -1;
}
}
if (ADB_TRACING) {
dump_packet(name, "from remote", *ppacket);
}
return 0;
}
static int
write_packet(int fd, const char* name, apacket** ppacket)
{
char *p = (char*) ppacket; /* we really write the packet address */
int r, len = sizeof(ppacket);
char buff[8];
if (!name) {
snprintf(buff, sizeof buff, "fd=%d", fd);
name = buff;
}
if (ADB_TRACING) {
dump_packet(name, "to remote", *ppacket);
}
len = sizeof(ppacket);
while(len > 0) {
r = adb_write(fd, p, len);
if(r > 0) {
len -= r;
p += r;
} else {
D("%s: write_packet (fd=%d) error ret=%d errno=%d: %s\n", name, fd, r, errno, strerror(errno));
if((r < 0) && (errno == EINTR)) continue;
return -1;
}
}
return 0;
}
static void transport_socket_events(int fd, unsigned events, void *_t)
{
atransport *t = reinterpret_cast<atransport*>(_t);
D("transport_socket_events(fd=%d, events=%04x,...)\n", fd, events);
if(events & FDE_READ){
apacket *p = 0;
if(read_packet(fd, t->serial, &p)){
D("%s: failed to read packet from transport socket on fd %d\n", t->serial, fd);
} else {
handle_packet(p, (atransport *) _t);
}
}
}
void send_packet(apacket *p, atransport *t)
{
unsigned char *x;
unsigned sum;
unsigned count;
p->msg.magic = p->msg.command ^ 0xffffffff;
count = p->msg.data_length;
x = (unsigned char *) p->data;
sum = 0;
while(count-- > 0){
sum += *x++;
}
p->msg.data_check = sum;
print_packet("send", p);
if (t == NULL) {
D("Transport is null \n");
// Zap errno because print_packet() and other stuff have errno effect.
errno = 0;
fatal_errno("Transport is null");
}
if(write_packet(t->transport_socket, t->serial, &p)){
fatal_errno("cannot enqueue packet on transport socket");
}
}
/* The transport is opened by transport_register_func before
** the input and output threads are started.
**
** The output thread issues a SYNC(1, token) message to let
** the input thread know to start things up. In the event
** of transport IO failure, the output thread will post a
** SYNC(0,0) message to ensure shutdown.
**
** The transport will not actually be closed until both
** threads exit, but the input thread will kick the transport
** on its way out to disconnect the underlying device.
*/
static void *output_thread(void *_t)
{
atransport *t = reinterpret_cast<atransport*>(_t);
apacket *p;
D("%s: starting transport output thread on fd %d, SYNC online (%d)\n",
t->serial, t->fd, t->sync_token + 1);
p = get_apacket();
p->msg.command = A_SYNC;
p->msg.arg0 = 1;
p->msg.arg1 = ++(t->sync_token);
p->msg.magic = A_SYNC ^ 0xffffffff;
if(write_packet(t->fd, t->serial, &p)) {
put_apacket(p);
D("%s: failed to write SYNC packet\n", t->serial);
goto oops;
}
D("%s: data pump started\n", t->serial);
for(;;) {
p = get_apacket();
if(t->read_from_remote(p, t) == 0){
D("%s: received remote packet, sending to transport\n",
t->serial);
if(write_packet(t->fd, t->serial, &p)){
put_apacket(p);
D("%s: failed to write apacket to transport\n", t->serial);
goto oops;
}
} else {
D("%s: remote read failed for transport\n", t->serial);
put_apacket(p);
break;
}
}
D("%s: SYNC offline for transport\n", t->serial);
p = get_apacket();
p->msg.command = A_SYNC;
p->msg.arg0 = 0;
p->msg.arg1 = 0;
p->msg.magic = A_SYNC ^ 0xffffffff;
if(write_packet(t->fd, t->serial, &p)) {
put_apacket(p);
D("%s: failed to write SYNC apacket to transport\n", t->serial);
}
oops:
D("%s: transport output thread is exiting\n", t->serial);
kick_transport(t);
transport_unref(t);
return 0;
}
static void *input_thread(void *_t)
{
atransport *t = reinterpret_cast<atransport*>(_t);
apacket *p;
int active = 0;
D("%s: starting transport input thread, reading from fd %d\n",
t->serial, t->fd);
for(;;){
if(read_packet(t->fd, t->serial, &p)) {
D("%s: failed to read apacket from transport on fd %d\n",
t->serial, t->fd );
break;
}
if(p->msg.command == A_SYNC){
if(p->msg.arg0 == 0) {
D("%s: transport SYNC offline\n", t->serial);
put_apacket(p);
break;
} else {
if(p->msg.arg1 == t->sync_token) {
D("%s: transport SYNC online\n", t->serial);
active = 1;
} else {
D("%s: transport ignoring SYNC %d != %d\n",
t->serial, p->msg.arg1, t->sync_token);
}
}
} else {
if(active) {
D("%s: transport got packet, sending to remote\n", t->serial);
t->write_to_remote(p, t);
} else {
D("%s: transport ignoring packet while offline\n", t->serial);
}
}
put_apacket(p);
}
// this is necessary to avoid a race condition that occured when a transport closes
// while a client socket is still active.
close_all_sockets(t);
D("%s: transport input thread is exiting, fd %d\n", t->serial, t->fd);
kick_transport(t);
transport_unref(t);
return 0;
}
static int transport_registration_send = -1;
static int transport_registration_recv = -1;
static fdevent transport_registration_fde;
#if ADB_HOST
/* this adds support required by the 'track-devices' service.
* this is used to send the content of "list_transport" to any
* number of client connections that want it through a single
* live TCP connection
*/
struct device_tracker {
asocket socket;
int update_needed;
device_tracker* next;
};
/* linked list of all device trackers */
static device_tracker* device_tracker_list;
static void
device_tracker_remove( device_tracker* tracker )
{
device_tracker** pnode = &device_tracker_list;
device_tracker* node = *pnode;
adb_mutex_lock( &transport_lock );
while (node) {
if (node == tracker) {
*pnode = node->next;
break;
}
pnode = &node->next;
node = *pnode;
}
adb_mutex_unlock( &transport_lock );
}
static void
device_tracker_close( asocket* socket )
{
device_tracker* tracker = (device_tracker*) socket;
asocket* peer = socket->peer;
D( "device tracker %p removed\n", tracker);
if (peer) {
peer->peer = NULL;
peer->close(peer);
}
device_tracker_remove(tracker);
free(tracker);
}
static int
device_tracker_enqueue( asocket* socket, apacket* p )
{
/* you can't read from a device tracker, close immediately */
put_apacket(p);
device_tracker_close(socket);
return -1;
}
static int device_tracker_send(device_tracker* tracker, const std::string& string) {
apacket* p = get_apacket();
asocket* peer = tracker->socket.peer;
snprintf(reinterpret_cast<char*>(p->data), 5, "%04x", static_cast<int>(string.size()));
memcpy(&p->data[4], string.data(), string.size());
p->len = 4 + string.size();
return peer->enqueue(peer, p);
}
static void device_tracker_ready(asocket* socket) {
device_tracker* tracker = reinterpret_cast<device_tracker*>(socket);
// We want to send the device list when the tracker connects
// for the first time, even if no update occurred.
if (tracker->update_needed > 0) {
tracker->update_needed = 0;
std::string transports = list_transports(false);
device_tracker_send(tracker, transports);
}
}
asocket*
create_device_tracker(void)
{
device_tracker* tracker = reinterpret_cast<device_tracker*>(calloc(1, sizeof(*tracker)));
if (tracker == nullptr) fatal("cannot allocate device tracker");
D( "device tracker %p created\n", tracker);
tracker->socket.enqueue = device_tracker_enqueue;
tracker->socket.ready = device_tracker_ready;
tracker->socket.close = device_tracker_close;
tracker->update_needed = 1;
tracker->next = device_tracker_list;
device_tracker_list = tracker;
return &tracker->socket;
}
// Call this function each time the transport list has changed.
void update_transports() {
std::string transports = list_transports(false);
device_tracker* tracker = device_tracker_list;
while (tracker != nullptr) {
device_tracker* next = tracker->next;
// This may destroy the tracker if the connection is closed.
device_tracker_send(tracker, transports);
tracker = next;
}
}
#else
void update_transports() {
// Nothing to do on the device side.
}
#endif // ADB_HOST
struct tmsg
{
atransport *transport;
int action;
};
static int
transport_read_action(int fd, struct tmsg* m)
{
char *p = (char*)m;
int len = sizeof(*m);
int r;
while(len > 0) {
r = adb_read(fd, p, len);
if(r > 0) {
len -= r;
p += r;
} else {
if((r < 0) && (errno == EINTR)) continue;
D("transport_read_action: on fd %d, error %d: %s\n",
fd, errno, strerror(errno));
return -1;
}
}
return 0;
}
static int
transport_write_action(int fd, struct tmsg* m)
{
char *p = (char*)m;
int len = sizeof(*m);
int r;
while(len > 0) {
r = adb_write(fd, p, len);
if(r > 0) {
len -= r;
p += r;
} else {
if((r < 0) && (errno == EINTR)) continue;
D("transport_write_action: on fd %d, error %d: %s\n",
fd, errno, strerror(errno));
return -1;
}
}
return 0;
}
static void transport_registration_func(int _fd, unsigned ev, void *data)
{
tmsg m;
int s[2];
atransport *t;
if(!(ev & FDE_READ)) {
return;
}
if(transport_read_action(_fd, &m)) {
fatal_errno("cannot read transport registration socket");
}
t = m.transport;
if(m.action == 0){
D("transport: %s removing and free'ing %d\n", t->serial, t->transport_socket);
/* IMPORTANT: the remove closes one half of the
** socket pair. The close closes the other half.
*/
fdevent_remove(&(t->transport_fde));
adb_close(t->fd);
adb_mutex_lock(&transport_lock);
transport_list.remove(t);
adb_mutex_unlock(&transport_lock);
run_transport_disconnects(t);
if (t->product)
free(t->product);
if (t->serial)
free(t->serial);
if (t->model)
free(t->model);
if (t->device)
free(t->device);
if (t->devpath)
free(t->devpath);
delete t;
update_transports();
return;
}
/* don't create transport threads for inaccessible devices */
if (t->connection_state != kCsNoPerm) {
/* initial references are the two threads */
t->ref_count = 2;
if (adb_socketpair(s)) {
fatal_errno("cannot open transport socketpair");
}
D("transport: %s socketpair: (%d,%d) starting\n", t->serial, s[0], s[1]);
t->transport_socket = s[0];
t->fd = s[1];
fdevent_install(&(t->transport_fde),
t->transport_socket,
transport_socket_events,
t);
fdevent_set(&(t->transport_fde), FDE_READ);
if (!adb_thread_create(input_thread, t)) {
fatal_errno("cannot create input thread");
}
if (!adb_thread_create(output_thread, t)) {
fatal_errno("cannot create output thread");
}
}
adb_mutex_lock(&transport_lock);
pending_list.remove(t);
transport_list.push_front(t);
adb_mutex_unlock(&transport_lock);
t->disconnects.next = t->disconnects.prev = &t->disconnects;
update_transports();
}
void init_transport_registration(void)
{
int s[2];
if(adb_socketpair(s)){
fatal_errno("cannot open transport registration socketpair");
}
D("socketpair: (%d,%d)\n", s[0], s[1]);
transport_registration_send = s[0];
transport_registration_recv = s[1];
fdevent_install(&transport_registration_fde,
transport_registration_recv,
transport_registration_func,
0);
fdevent_set(&transport_registration_fde, FDE_READ);
}
/* the fdevent select pump is single threaded */
static void register_transport(atransport *transport)
{
tmsg m;
m.transport = transport;
m.action = 1;
D("transport: %s registered\n", transport->serial);
if(transport_write_action(transport_registration_send, &m)) {
fatal_errno("cannot write transport registration socket\n");
}
}
static void remove_transport(atransport *transport)
{
tmsg m;
m.transport = transport;
m.action = 0;
D("transport: %s removed\n", transport->serial);
if(transport_write_action(transport_registration_send, &m)) {
fatal_errno("cannot write transport registration socket\n");
}
}
static void transport_unref_locked(atransport *t)
{
t->ref_count--;
if (t->ref_count == 0) {
D("transport: %s unref (kicking and closing)\n", t->serial);
if (!t->kicked) {
t->kicked = 1;
t->kick(t);
}
t->close(t);
remove_transport(t);
} else {
D("transport: %s unref (count=%d)\n", t->serial, t->ref_count);
}
}
static void transport_unref(atransport *t)
{
if (t) {
adb_mutex_lock(&transport_lock);
transport_unref_locked(t);
adb_mutex_unlock(&transport_lock);
}
}
void add_transport_disconnect(atransport* t, adisconnect* dis)
{
adb_mutex_lock(&transport_lock);
dis->next = &t->disconnects;
dis->prev = dis->next->prev;
dis->prev->next = dis;
dis->next->prev = dis;
adb_mutex_unlock(&transport_lock);
}
void remove_transport_disconnect(atransport* t, adisconnect* dis)
{
dis->prev->next = dis->next;
dis->next->prev = dis->prev;
dis->next = dis->prev = dis;
}
adb: Generalizing -s to take qualifiers. Prior to this change, -s could take either a serial number or a device path (e.g. "-s 01498B1F02015015" or "-s usb:1-4.2"). This change extends -s to also allow product, model or device names (e.g. "-s product:mysid"). These new qualifiers will only be available on devices that are running an adb daemon that provides properties in the connect message per Change-Id: I09200decde4facb8fc9b4056fdae910155f2bcb9 The product, model and device are derived from the ro.product.name, ro.product.model and ro.product.device properties respectively. They are prefixed with "product:", "model:" or "device:" as appropriate. In addition, any non-alphanumerics in the model are changed to underscores. If the -s parameter matches multiple devices, the result will be the same as when multiple devices are connected but no -d, -e or -s option is specified. In general, this means the user will get "error: more than one device". However for get-state, get-devpath and get-serialno, they will get "unknown". The format of "devices -l" was changed to list all of the qualifiers that are available. The following example output (with the last digits of the serial numbers replaced with X's) is with a Galaxy Prime with an older adb daemon and another Galaxy Prime and Galaxy S both with the enhanced adb daemons: List of devices attached 016B75D60A0060XX device usb:2-5 product:mysid model:Galaxy_Nexus device:toro 3731B535FAC200XX device usb:1-4.2 product:soju model:Nexus_S device:crespo 01498B1F020150XX device usb:1-4.1 Note that the serial number and state are now column oriented instead of tab delimited. After the serial number and state, all qualifiers are listed with each preceded by a space. The output of the original devices command (without -l) is unchanged. Change-Id: Iceeb2789874effc25a630d514a375d6f1889dc56 Signed-off-by: Scott Anderson <saa@android.com>
2012-05-31 03:11:27 +02:00
static int qual_match(const char *to_test,
const char *prefix, const char *qual, bool sanitize_qual)
adb: Generalizing -s to take qualifiers. Prior to this change, -s could take either a serial number or a device path (e.g. "-s 01498B1F02015015" or "-s usb:1-4.2"). This change extends -s to also allow product, model or device names (e.g. "-s product:mysid"). These new qualifiers will only be available on devices that are running an adb daemon that provides properties in the connect message per Change-Id: I09200decde4facb8fc9b4056fdae910155f2bcb9 The product, model and device are derived from the ro.product.name, ro.product.model and ro.product.device properties respectively. They are prefixed with "product:", "model:" or "device:" as appropriate. In addition, any non-alphanumerics in the model are changed to underscores. If the -s parameter matches multiple devices, the result will be the same as when multiple devices are connected but no -d, -e or -s option is specified. In general, this means the user will get "error: more than one device". However for get-state, get-devpath and get-serialno, they will get "unknown". The format of "devices -l" was changed to list all of the qualifiers that are available. The following example output (with the last digits of the serial numbers replaced with X's) is with a Galaxy Prime with an older adb daemon and another Galaxy Prime and Galaxy S both with the enhanced adb daemons: List of devices attached 016B75D60A0060XX device usb:2-5 product:mysid model:Galaxy_Nexus device:toro 3731B535FAC200XX device usb:1-4.2 product:soju model:Nexus_S device:crespo 01498B1F020150XX device usb:1-4.1 Note that the serial number and state are now column oriented instead of tab delimited. After the serial number and state, all qualifiers are listed with each preceded by a space. The output of the original devices command (without -l) is unchanged. Change-Id: Iceeb2789874effc25a630d514a375d6f1889dc56 Signed-off-by: Scott Anderson <saa@android.com>
2012-05-31 03:11:27 +02:00
{
if (!to_test || !*to_test)
/* Return true if both the qual and to_test are null strings. */
return !qual || !*qual;
if (!qual)
return 0;
if (prefix) {
while (*prefix) {
if (*prefix++ != *to_test++)
return 0;
}
}
while (*qual) {
char ch = *qual++;
if (sanitize_qual && !isalnum(ch))
adb: Generalizing -s to take qualifiers. Prior to this change, -s could take either a serial number or a device path (e.g. "-s 01498B1F02015015" or "-s usb:1-4.2"). This change extends -s to also allow product, model or device names (e.g. "-s product:mysid"). These new qualifiers will only be available on devices that are running an adb daemon that provides properties in the connect message per Change-Id: I09200decde4facb8fc9b4056fdae910155f2bcb9 The product, model and device are derived from the ro.product.name, ro.product.model and ro.product.device properties respectively. They are prefixed with "product:", "model:" or "device:" as appropriate. In addition, any non-alphanumerics in the model are changed to underscores. If the -s parameter matches multiple devices, the result will be the same as when multiple devices are connected but no -d, -e or -s option is specified. In general, this means the user will get "error: more than one device". However for get-state, get-devpath and get-serialno, they will get "unknown". The format of "devices -l" was changed to list all of the qualifiers that are available. The following example output (with the last digits of the serial numbers replaced with X's) is with a Galaxy Prime with an older adb daemon and another Galaxy Prime and Galaxy S both with the enhanced adb daemons: List of devices attached 016B75D60A0060XX device usb:2-5 product:mysid model:Galaxy_Nexus device:toro 3731B535FAC200XX device usb:1-4.2 product:soju model:Nexus_S device:crespo 01498B1F020150XX device usb:1-4.1 Note that the serial number and state are now column oriented instead of tab delimited. After the serial number and state, all qualifiers are listed with each preceded by a space. The output of the original devices command (without -l) is unchanged. Change-Id: Iceeb2789874effc25a630d514a375d6f1889dc56 Signed-off-by: Scott Anderson <saa@android.com>
2012-05-31 03:11:27 +02:00
ch = '_';
if (ch != *to_test++)
return 0;
}
/* Everything matched so far. Return true if *to_test is a NUL. */
return !*to_test;
}
atransport* acquire_one_transport(ConnectionState state, TransportType type,
const char* serial, std::string* error_out) {
atransport *result = NULL;
int ambiguous = 0;
retry:
*error_out = serial ? android::base::StringPrintf("device '%s' not found", serial) : "no devices found";
adb_mutex_lock(&transport_lock);
for (auto t : transport_list) {
if (t->connection_state == kCsNoPerm) {
*error_out = "insufficient permissions for device";
continue;
}
/* check for matching serial number */
if (serial) {
adb: Generalizing -s to take qualifiers. Prior to this change, -s could take either a serial number or a device path (e.g. "-s 01498B1F02015015" or "-s usb:1-4.2"). This change extends -s to also allow product, model or device names (e.g. "-s product:mysid"). These new qualifiers will only be available on devices that are running an adb daemon that provides properties in the connect message per Change-Id: I09200decde4facb8fc9b4056fdae910155f2bcb9 The product, model and device are derived from the ro.product.name, ro.product.model and ro.product.device properties respectively. They are prefixed with "product:", "model:" or "device:" as appropriate. In addition, any non-alphanumerics in the model are changed to underscores. If the -s parameter matches multiple devices, the result will be the same as when multiple devices are connected but no -d, -e or -s option is specified. In general, this means the user will get "error: more than one device". However for get-state, get-devpath and get-serialno, they will get "unknown". The format of "devices -l" was changed to list all of the qualifiers that are available. The following example output (with the last digits of the serial numbers replaced with X's) is with a Galaxy Prime with an older adb daemon and another Galaxy Prime and Galaxy S both with the enhanced adb daemons: List of devices attached 016B75D60A0060XX device usb:2-5 product:mysid model:Galaxy_Nexus device:toro 3731B535FAC200XX device usb:1-4.2 product:soju model:Nexus_S device:crespo 01498B1F020150XX device usb:1-4.1 Note that the serial number and state are now column oriented instead of tab delimited. After the serial number and state, all qualifiers are listed with each preceded by a space. The output of the original devices command (without -l) is unchanged. Change-Id: Iceeb2789874effc25a630d514a375d6f1889dc56 Signed-off-by: Scott Anderson <saa@android.com>
2012-05-31 03:11:27 +02:00
if ((t->serial && !strcmp(serial, t->serial)) ||
(t->devpath && !strcmp(serial, t->devpath)) ||
qual_match(serial, "product:", t->product, false) ||
qual_match(serial, "model:", t->model, true) ||
qual_match(serial, "device:", t->device, false)) {
adb: Generalizing -s to take qualifiers. Prior to this change, -s could take either a serial number or a device path (e.g. "-s 01498B1F02015015" or "-s usb:1-4.2"). This change extends -s to also allow product, model or device names (e.g. "-s product:mysid"). These new qualifiers will only be available on devices that are running an adb daemon that provides properties in the connect message per Change-Id: I09200decde4facb8fc9b4056fdae910155f2bcb9 The product, model and device are derived from the ro.product.name, ro.product.model and ro.product.device properties respectively. They are prefixed with "product:", "model:" or "device:" as appropriate. In addition, any non-alphanumerics in the model are changed to underscores. If the -s parameter matches multiple devices, the result will be the same as when multiple devices are connected but no -d, -e or -s option is specified. In general, this means the user will get "error: more than one device". However for get-state, get-devpath and get-serialno, they will get "unknown". The format of "devices -l" was changed to list all of the qualifiers that are available. The following example output (with the last digits of the serial numbers replaced with X's) is with a Galaxy Prime with an older adb daemon and another Galaxy Prime and Galaxy S both with the enhanced adb daemons: List of devices attached 016B75D60A0060XX device usb:2-5 product:mysid model:Galaxy_Nexus device:toro 3731B535FAC200XX device usb:1-4.2 product:soju model:Nexus_S device:crespo 01498B1F020150XX device usb:1-4.1 Note that the serial number and state are now column oriented instead of tab delimited. After the serial number and state, all qualifiers are listed with each preceded by a space. The output of the original devices command (without -l) is unchanged. Change-Id: Iceeb2789874effc25a630d514a375d6f1889dc56 Signed-off-by: Scott Anderson <saa@android.com>
2012-05-31 03:11:27 +02:00
if (result) {
*error_out = "more than one device";
adb: Generalizing -s to take qualifiers. Prior to this change, -s could take either a serial number or a device path (e.g. "-s 01498B1F02015015" or "-s usb:1-4.2"). This change extends -s to also allow product, model or device names (e.g. "-s product:mysid"). These new qualifiers will only be available on devices that are running an adb daemon that provides properties in the connect message per Change-Id: I09200decde4facb8fc9b4056fdae910155f2bcb9 The product, model and device are derived from the ro.product.name, ro.product.model and ro.product.device properties respectively. They are prefixed with "product:", "model:" or "device:" as appropriate. In addition, any non-alphanumerics in the model are changed to underscores. If the -s parameter matches multiple devices, the result will be the same as when multiple devices are connected but no -d, -e or -s option is specified. In general, this means the user will get "error: more than one device". However for get-state, get-devpath and get-serialno, they will get "unknown". The format of "devices -l" was changed to list all of the qualifiers that are available. The following example output (with the last digits of the serial numbers replaced with X's) is with a Galaxy Prime with an older adb daemon and another Galaxy Prime and Galaxy S both with the enhanced adb daemons: List of devices attached 016B75D60A0060XX device usb:2-5 product:mysid model:Galaxy_Nexus device:toro 3731B535FAC200XX device usb:1-4.2 product:soju model:Nexus_S device:crespo 01498B1F020150XX device usb:1-4.1 Note that the serial number and state are now column oriented instead of tab delimited. After the serial number and state, all qualifiers are listed with each preceded by a space. The output of the original devices command (without -l) is unchanged. Change-Id: Iceeb2789874effc25a630d514a375d6f1889dc56 Signed-off-by: Scott Anderson <saa@android.com>
2012-05-31 03:11:27 +02:00
ambiguous = 1;
result = NULL;
break;
}
result = t;
}
} else {
if (type == kTransportUsb && t->type == kTransportUsb) {
if (result) {
*error_out = "more than one device";
ambiguous = 1;
result = NULL;
break;
}
result = t;
} else if (type == kTransportLocal && t->type == kTransportLocal) {
if (result) {
*error_out = "more than one emulator";
ambiguous = 1;
result = NULL;
break;
}
result = t;
} else if (type == kTransportAny) {
if (result) {
*error_out = "more than one device/emulator";
ambiguous = 1;
result = NULL;
break;
}
result = t;
}
}
}
adb_mutex_unlock(&transport_lock);
if (result) {
if (result->connection_state == kCsUnauthorized) {
*error_out = "device unauthorized.\n";
char* ADB_VENDOR_KEYS = getenv("ADB_VENDOR_KEYS");
*error_out += "This adb server's $ADB_VENDOR_KEYS is ";
*error_out += ADB_VENDOR_KEYS ? ADB_VENDOR_KEYS : "not set";
*error_out += "\n";
*error_out += "Try 'adb kill-server' if that seems wrong.\n";
*error_out += "Otherwise check for a confirmation dialog on your device.";
result = NULL;
}
/* offline devices are ignored -- they are either being born or dying */
if (result && result->connection_state == kCsOffline) {
*error_out = "device offline";
result = NULL;
}
/* check for required connection state */
if (result && state != kCsAny && result->connection_state != state) {
*error_out = "invalid device state";
result = NULL;
}
}
if (result) {
/* found one that we can take */
*error_out = "success";
} else if (state != kCsAny && (serial || !ambiguous)) {
adb_sleep_ms(1000);
goto retry;
}
return result;
}
const char* atransport::connection_state_name() const {
switch (connection_state) {
case kCsOffline: return "offline";
case kCsBootloader: return "bootloader";
case kCsDevice: return "device";
case kCsHost: return "host";
case kCsRecovery: return "recovery";
case kCsNoPerm: return "no permissions";
case kCsSideload: return "sideload";
case kCsUnauthorized: return "unauthorized";
default: return "unknown";
}
}
void atransport::update_version(int version, size_t payload) {
protocol_version = std::min(version, A_VERSION);
max_payload = std::min(payload, MAX_PAYLOAD);
}
int atransport::get_protocol_version() const {
return protocol_version;
}
size_t atransport::get_max_payload() const {
return max_payload;
}
#if ADB_HOST
static void append_transport_info(std::string* result, const char* key,
const char* value, bool sanitize) {
if (value == nullptr || *value == '\0') {
adb: Generalizing -s to take qualifiers. Prior to this change, -s could take either a serial number or a device path (e.g. "-s 01498B1F02015015" or "-s usb:1-4.2"). This change extends -s to also allow product, model or device names (e.g. "-s product:mysid"). These new qualifiers will only be available on devices that are running an adb daemon that provides properties in the connect message per Change-Id: I09200decde4facb8fc9b4056fdae910155f2bcb9 The product, model and device are derived from the ro.product.name, ro.product.model and ro.product.device properties respectively. They are prefixed with "product:", "model:" or "device:" as appropriate. In addition, any non-alphanumerics in the model are changed to underscores. If the -s parameter matches multiple devices, the result will be the same as when multiple devices are connected but no -d, -e or -s option is specified. In general, this means the user will get "error: more than one device". However for get-state, get-devpath and get-serialno, they will get "unknown". The format of "devices -l" was changed to list all of the qualifiers that are available. The following example output (with the last digits of the serial numbers replaced with X's) is with a Galaxy Prime with an older adb daemon and another Galaxy Prime and Galaxy S both with the enhanced adb daemons: List of devices attached 016B75D60A0060XX device usb:2-5 product:mysid model:Galaxy_Nexus device:toro 3731B535FAC200XX device usb:1-4.2 product:soju model:Nexus_S device:crespo 01498B1F020150XX device usb:1-4.1 Note that the serial number and state are now column oriented instead of tab delimited. After the serial number and state, all qualifiers are listed with each preceded by a space. The output of the original devices command (without -l) is unchanged. Change-Id: Iceeb2789874effc25a630d514a375d6f1889dc56 Signed-off-by: Scott Anderson <saa@android.com>
2012-05-31 03:11:27 +02:00
return;
}
adb: Generalizing -s to take qualifiers. Prior to this change, -s could take either a serial number or a device path (e.g. "-s 01498B1F02015015" or "-s usb:1-4.2"). This change extends -s to also allow product, model or device names (e.g. "-s product:mysid"). These new qualifiers will only be available on devices that are running an adb daemon that provides properties in the connect message per Change-Id: I09200decde4facb8fc9b4056fdae910155f2bcb9 The product, model and device are derived from the ro.product.name, ro.product.model and ro.product.device properties respectively. They are prefixed with "product:", "model:" or "device:" as appropriate. In addition, any non-alphanumerics in the model are changed to underscores. If the -s parameter matches multiple devices, the result will be the same as when multiple devices are connected but no -d, -e or -s option is specified. In general, this means the user will get "error: more than one device". However for get-state, get-devpath and get-serialno, they will get "unknown". The format of "devices -l" was changed to list all of the qualifiers that are available. The following example output (with the last digits of the serial numbers replaced with X's) is with a Galaxy Prime with an older adb daemon and another Galaxy Prime and Galaxy S both with the enhanced adb daemons: List of devices attached 016B75D60A0060XX device usb:2-5 product:mysid model:Galaxy_Nexus device:toro 3731B535FAC200XX device usb:1-4.2 product:soju model:Nexus_S device:crespo 01498B1F020150XX device usb:1-4.1 Note that the serial number and state are now column oriented instead of tab delimited. After the serial number and state, all qualifiers are listed with each preceded by a space. The output of the original devices command (without -l) is unchanged. Change-Id: Iceeb2789874effc25a630d514a375d6f1889dc56 Signed-off-by: Scott Anderson <saa@android.com>
2012-05-31 03:11:27 +02:00
*result += ' ';
*result += key;
adb: Generalizing -s to take qualifiers. Prior to this change, -s could take either a serial number or a device path (e.g. "-s 01498B1F02015015" or "-s usb:1-4.2"). This change extends -s to also allow product, model or device names (e.g. "-s product:mysid"). These new qualifiers will only be available on devices that are running an adb daemon that provides properties in the connect message per Change-Id: I09200decde4facb8fc9b4056fdae910155f2bcb9 The product, model and device are derived from the ro.product.name, ro.product.model and ro.product.device properties respectively. They are prefixed with "product:", "model:" or "device:" as appropriate. In addition, any non-alphanumerics in the model are changed to underscores. If the -s parameter matches multiple devices, the result will be the same as when multiple devices are connected but no -d, -e or -s option is specified. In general, this means the user will get "error: more than one device". However for get-state, get-devpath and get-serialno, they will get "unknown". The format of "devices -l" was changed to list all of the qualifiers that are available. The following example output (with the last digits of the serial numbers replaced with X's) is with a Galaxy Prime with an older adb daemon and another Galaxy Prime and Galaxy S both with the enhanced adb daemons: List of devices attached 016B75D60A0060XX device usb:2-5 product:mysid model:Galaxy_Nexus device:toro 3731B535FAC200XX device usb:1-4.2 product:soju model:Nexus_S device:crespo 01498B1F020150XX device usb:1-4.1 Note that the serial number and state are now column oriented instead of tab delimited. After the serial number and state, all qualifiers are listed with each preceded by a space. The output of the original devices command (without -l) is unchanged. Change-Id: Iceeb2789874effc25a630d514a375d6f1889dc56 Signed-off-by: Scott Anderson <saa@android.com>
2012-05-31 03:11:27 +02:00
for (const char* p = value; *p; ++p) {
result->push_back((!sanitize || isalnum(*p)) ? *p : '_');
adb: Generalizing -s to take qualifiers. Prior to this change, -s could take either a serial number or a device path (e.g. "-s 01498B1F02015015" or "-s usb:1-4.2"). This change extends -s to also allow product, model or device names (e.g. "-s product:mysid"). These new qualifiers will only be available on devices that are running an adb daemon that provides properties in the connect message per Change-Id: I09200decde4facb8fc9b4056fdae910155f2bcb9 The product, model and device are derived from the ro.product.name, ro.product.model and ro.product.device properties respectively. They are prefixed with "product:", "model:" or "device:" as appropriate. In addition, any non-alphanumerics in the model are changed to underscores. If the -s parameter matches multiple devices, the result will be the same as when multiple devices are connected but no -d, -e or -s option is specified. In general, this means the user will get "error: more than one device". However for get-state, get-devpath and get-serialno, they will get "unknown". The format of "devices -l" was changed to list all of the qualifiers that are available. The following example output (with the last digits of the serial numbers replaced with X's) is with a Galaxy Prime with an older adb daemon and another Galaxy Prime and Galaxy S both with the enhanced adb daemons: List of devices attached 016B75D60A0060XX device usb:2-5 product:mysid model:Galaxy_Nexus device:toro 3731B535FAC200XX device usb:1-4.2 product:soju model:Nexus_S device:crespo 01498B1F020150XX device usb:1-4.1 Note that the serial number and state are now column oriented instead of tab delimited. After the serial number and state, all qualifiers are listed with each preceded by a space. The output of the original devices command (without -l) is unchanged. Change-Id: Iceeb2789874effc25a630d514a375d6f1889dc56 Signed-off-by: Scott Anderson <saa@android.com>
2012-05-31 03:11:27 +02:00
}
}
static void append_transport(const atransport* t, std::string* result,
bool long_listing) {
adb: Generalizing -s to take qualifiers. Prior to this change, -s could take either a serial number or a device path (e.g. "-s 01498B1F02015015" or "-s usb:1-4.2"). This change extends -s to also allow product, model or device names (e.g. "-s product:mysid"). These new qualifiers will only be available on devices that are running an adb daemon that provides properties in the connect message per Change-Id: I09200decde4facb8fc9b4056fdae910155f2bcb9 The product, model and device are derived from the ro.product.name, ro.product.model and ro.product.device properties respectively. They are prefixed with "product:", "model:" or "device:" as appropriate. In addition, any non-alphanumerics in the model are changed to underscores. If the -s parameter matches multiple devices, the result will be the same as when multiple devices are connected but no -d, -e or -s option is specified. In general, this means the user will get "error: more than one device". However for get-state, get-devpath and get-serialno, they will get "unknown". The format of "devices -l" was changed to list all of the qualifiers that are available. The following example output (with the last digits of the serial numbers replaced with X's) is with a Galaxy Prime with an older adb daemon and another Galaxy Prime and Galaxy S both with the enhanced adb daemons: List of devices attached 016B75D60A0060XX device usb:2-5 product:mysid model:Galaxy_Nexus device:toro 3731B535FAC200XX device usb:1-4.2 product:soju model:Nexus_S device:crespo 01498B1F020150XX device usb:1-4.1 Note that the serial number and state are now column oriented instead of tab delimited. After the serial number and state, all qualifiers are listed with each preceded by a space. The output of the original devices command (without -l) is unchanged. Change-Id: Iceeb2789874effc25a630d514a375d6f1889dc56 Signed-off-by: Scott Anderson <saa@android.com>
2012-05-31 03:11:27 +02:00
const char* serial = t->serial;
if (!serial || !serial[0]) {
serial = "(no serial number)";
}
adb: Generalizing -s to take qualifiers. Prior to this change, -s could take either a serial number or a device path (e.g. "-s 01498B1F02015015" or "-s usb:1-4.2"). This change extends -s to also allow product, model or device names (e.g. "-s product:mysid"). These new qualifiers will only be available on devices that are running an adb daemon that provides properties in the connect message per Change-Id: I09200decde4facb8fc9b4056fdae910155f2bcb9 The product, model and device are derived from the ro.product.name, ro.product.model and ro.product.device properties respectively. They are prefixed with "product:", "model:" or "device:" as appropriate. In addition, any non-alphanumerics in the model are changed to underscores. If the -s parameter matches multiple devices, the result will be the same as when multiple devices are connected but no -d, -e or -s option is specified. In general, this means the user will get "error: more than one device". However for get-state, get-devpath and get-serialno, they will get "unknown". The format of "devices -l" was changed to list all of the qualifiers that are available. The following example output (with the last digits of the serial numbers replaced with X's) is with a Galaxy Prime with an older adb daemon and another Galaxy Prime and Galaxy S both with the enhanced adb daemons: List of devices attached 016B75D60A0060XX device usb:2-5 product:mysid model:Galaxy_Nexus device:toro 3731B535FAC200XX device usb:1-4.2 product:soju model:Nexus_S device:crespo 01498B1F020150XX device usb:1-4.1 Note that the serial number and state are now column oriented instead of tab delimited. After the serial number and state, all qualifiers are listed with each preceded by a space. The output of the original devices command (without -l) is unchanged. Change-Id: Iceeb2789874effc25a630d514a375d6f1889dc56 Signed-off-by: Scott Anderson <saa@android.com>
2012-05-31 03:11:27 +02:00
if (!long_listing) {
*result += serial;
*result += '\t';
*result += t->connection_state_name();
adb: Generalizing -s to take qualifiers. Prior to this change, -s could take either a serial number or a device path (e.g. "-s 01498B1F02015015" or "-s usb:1-4.2"). This change extends -s to also allow product, model or device names (e.g. "-s product:mysid"). These new qualifiers will only be available on devices that are running an adb daemon that provides properties in the connect message per Change-Id: I09200decde4facb8fc9b4056fdae910155f2bcb9 The product, model and device are derived from the ro.product.name, ro.product.model and ro.product.device properties respectively. They are prefixed with "product:", "model:" or "device:" as appropriate. In addition, any non-alphanumerics in the model are changed to underscores. If the -s parameter matches multiple devices, the result will be the same as when multiple devices are connected but no -d, -e or -s option is specified. In general, this means the user will get "error: more than one device". However for get-state, get-devpath and get-serialno, they will get "unknown". The format of "devices -l" was changed to list all of the qualifiers that are available. The following example output (with the last digits of the serial numbers replaced with X's) is with a Galaxy Prime with an older adb daemon and another Galaxy Prime and Galaxy S both with the enhanced adb daemons: List of devices attached 016B75D60A0060XX device usb:2-5 product:mysid model:Galaxy_Nexus device:toro 3731B535FAC200XX device usb:1-4.2 product:soju model:Nexus_S device:crespo 01498B1F020150XX device usb:1-4.1 Note that the serial number and state are now column oriented instead of tab delimited. After the serial number and state, all qualifiers are listed with each preceded by a space. The output of the original devices command (without -l) is unchanged. Change-Id: Iceeb2789874effc25a630d514a375d6f1889dc56 Signed-off-by: Scott Anderson <saa@android.com>
2012-05-31 03:11:27 +02:00
} else {
android::base::StringAppendF(result, "%-22s %s", serial, t->connection_state_name());
adb: Generalizing -s to take qualifiers. Prior to this change, -s could take either a serial number or a device path (e.g. "-s 01498B1F02015015" or "-s usb:1-4.2"). This change extends -s to also allow product, model or device names (e.g. "-s product:mysid"). These new qualifiers will only be available on devices that are running an adb daemon that provides properties in the connect message per Change-Id: I09200decde4facb8fc9b4056fdae910155f2bcb9 The product, model and device are derived from the ro.product.name, ro.product.model and ro.product.device properties respectively. They are prefixed with "product:", "model:" or "device:" as appropriate. In addition, any non-alphanumerics in the model are changed to underscores. If the -s parameter matches multiple devices, the result will be the same as when multiple devices are connected but no -d, -e or -s option is specified. In general, this means the user will get "error: more than one device". However for get-state, get-devpath and get-serialno, they will get "unknown". The format of "devices -l" was changed to list all of the qualifiers that are available. The following example output (with the last digits of the serial numbers replaced with X's) is with a Galaxy Prime with an older adb daemon and another Galaxy Prime and Galaxy S both with the enhanced adb daemons: List of devices attached 016B75D60A0060XX device usb:2-5 product:mysid model:Galaxy_Nexus device:toro 3731B535FAC200XX device usb:1-4.2 product:soju model:Nexus_S device:crespo 01498B1F020150XX device usb:1-4.1 Note that the serial number and state are now column oriented instead of tab delimited. After the serial number and state, all qualifiers are listed with each preceded by a space. The output of the original devices command (without -l) is unchanged. Change-Id: Iceeb2789874effc25a630d514a375d6f1889dc56 Signed-off-by: Scott Anderson <saa@android.com>
2012-05-31 03:11:27 +02:00
append_transport_info(result, "", t->devpath, false);
append_transport_info(result, "product:", t->product, false);
append_transport_info(result, "model:", t->model, true);
append_transport_info(result, "device:", t->device, false);
adb: Generalizing -s to take qualifiers. Prior to this change, -s could take either a serial number or a device path (e.g. "-s 01498B1F02015015" or "-s usb:1-4.2"). This change extends -s to also allow product, model or device names (e.g. "-s product:mysid"). These new qualifiers will only be available on devices that are running an adb daemon that provides properties in the connect message per Change-Id: I09200decde4facb8fc9b4056fdae910155f2bcb9 The product, model and device are derived from the ro.product.name, ro.product.model and ro.product.device properties respectively. They are prefixed with "product:", "model:" or "device:" as appropriate. In addition, any non-alphanumerics in the model are changed to underscores. If the -s parameter matches multiple devices, the result will be the same as when multiple devices are connected but no -d, -e or -s option is specified. In general, this means the user will get "error: more than one device". However for get-state, get-devpath and get-serialno, they will get "unknown". The format of "devices -l" was changed to list all of the qualifiers that are available. The following example output (with the last digits of the serial numbers replaced with X's) is with a Galaxy Prime with an older adb daemon and another Galaxy Prime and Galaxy S both with the enhanced adb daemons: List of devices attached 016B75D60A0060XX device usb:2-5 product:mysid model:Galaxy_Nexus device:toro 3731B535FAC200XX device usb:1-4.2 product:soju model:Nexus_S device:crespo 01498B1F020150XX device usb:1-4.1 Note that the serial number and state are now column oriented instead of tab delimited. After the serial number and state, all qualifiers are listed with each preceded by a space. The output of the original devices command (without -l) is unchanged. Change-Id: Iceeb2789874effc25a630d514a375d6f1889dc56 Signed-off-by: Scott Anderson <saa@android.com>
2012-05-31 03:11:27 +02:00
}
*result += '\n';
adb: Generalizing -s to take qualifiers. Prior to this change, -s could take either a serial number or a device path (e.g. "-s 01498B1F02015015" or "-s usb:1-4.2"). This change extends -s to also allow product, model or device names (e.g. "-s product:mysid"). These new qualifiers will only be available on devices that are running an adb daemon that provides properties in the connect message per Change-Id: I09200decde4facb8fc9b4056fdae910155f2bcb9 The product, model and device are derived from the ro.product.name, ro.product.model and ro.product.device properties respectively. They are prefixed with "product:", "model:" or "device:" as appropriate. In addition, any non-alphanumerics in the model are changed to underscores. If the -s parameter matches multiple devices, the result will be the same as when multiple devices are connected but no -d, -e or -s option is specified. In general, this means the user will get "error: more than one device". However for get-state, get-devpath and get-serialno, they will get "unknown". The format of "devices -l" was changed to list all of the qualifiers that are available. The following example output (with the last digits of the serial numbers replaced with X's) is with a Galaxy Prime with an older adb daemon and another Galaxy Prime and Galaxy S both with the enhanced adb daemons: List of devices attached 016B75D60A0060XX device usb:2-5 product:mysid model:Galaxy_Nexus device:toro 3731B535FAC200XX device usb:1-4.2 product:soju model:Nexus_S device:crespo 01498B1F020150XX device usb:1-4.1 Note that the serial number and state are now column oriented instead of tab delimited. After the serial number and state, all qualifiers are listed with each preceded by a space. The output of the original devices command (without -l) is unchanged. Change-Id: Iceeb2789874effc25a630d514a375d6f1889dc56 Signed-off-by: Scott Anderson <saa@android.com>
2012-05-31 03:11:27 +02:00
}
std::string list_transports(bool long_listing) {
std::string result;
adb_mutex_lock(&transport_lock);
for (const auto t : transport_list) {
append_transport(t, &result, long_listing);
}
adb_mutex_unlock(&transport_lock);
return result;
}
/* hack for osx */
void close_usb_devices() {
adb_mutex_lock(&transport_lock);
for (auto t : transport_list) {
if (!t->kicked) {
t->kicked = 1;
t->kick(t);
}
}
adb_mutex_unlock(&transport_lock);
}
#endif // ADB_HOST
int register_socket_transport(int s, const char *serial, int port, int local) {
atransport* t = new atransport();
if (!serial) {
char buf[32];
snprintf(buf, sizeof(buf), "T-%p", t);
serial = buf;
}
D("transport: %s init'ing for socket %d, on port %d\n", serial, s, port);
if (init_socket_transport(t, s, port, local) < 0) {
delete t;
return -1;
}
adb_mutex_lock(&transport_lock);
for (auto transport : pending_list) {
if (transport->serial && strcmp(serial, transport->serial) == 0) {
adb_mutex_unlock(&transport_lock);
delete t;
return -1;
}
}
for (auto transport : transport_list) {
if (transport->serial && strcmp(serial, transport->serial) == 0) {
adb_mutex_unlock(&transport_lock);
delete t;
return -1;
}
}
pending_list.push_front(t);
t->serial = strdup(serial);
adb_mutex_unlock(&transport_lock);
register_transport(t);
return 0;
}
#if ADB_HOST
atransport *find_transport(const char *serial) {
atransport* result = nullptr;
adb_mutex_lock(&transport_lock);
for (auto t : transport_list) {
if (t->serial && strcmp(serial, t->serial) == 0) {
result = t;
break;
}
}
adb_mutex_unlock(&transport_lock);
return result;
}
void unregister_transport(atransport *t)
{
adb_mutex_lock(&transport_lock);
transport_list.remove(t);
adb_mutex_unlock(&transport_lock);
kick_transport(t);
transport_unref(t);
}
// Unregisters all non-emulator TCP transports.
void unregister_all_tcp_transports() {
adb_mutex_lock(&transport_lock);
for (auto it = transport_list.begin(); it != transport_list.end(); ) {
atransport* t = *it;
if (t->type == kTransportLocal && t->adb_port == 0) {
// We cannot call kick_transport when holding transport_lock.
if (!t->kicked) {
t->kicked = 1;
t->kick(t);
}
transport_unref_locked(t);
it = transport_list.erase(it);
} else {
++it;
}
}
adb_mutex_unlock(&transport_lock);
}
#endif
void register_usb_transport(usb_handle* usb, const char* serial,
const char* devpath, unsigned writeable) {
atransport* t = new atransport();
D("transport: %p init'ing for usb_handle %p (sn='%s')\n", t, usb,
serial ? serial : "");
init_usb_transport(t, usb, (writeable ? kCsOffline : kCsNoPerm));
if(serial) {
t->serial = strdup(serial);
}
if (devpath) {
t->devpath = strdup(devpath);
}
adb_mutex_lock(&transport_lock);
pending_list.push_front(t);
adb_mutex_unlock(&transport_lock);
register_transport(t);
}
// This should only be used for transports with connection_state == kCsNoPerm.
void unregister_usb_transport(usb_handle *usb) {
adb_mutex_lock(&transport_lock);
transport_list.remove_if([usb](atransport* t) {
return t->usb == usb && t->connection_state == kCsNoPerm;
});
adb_mutex_unlock(&transport_lock);
}
#undef TRACE_TAG
#define TRACE_TAG TRACE_RWX
int check_header(apacket *p, atransport *t)
{
if(p->msg.magic != (p->msg.command ^ 0xffffffff)) {
D("check_header(): invalid magic\n");
return -1;
}
if(p->msg.data_length > t->get_max_payload()) {
D("check_header(): %u > atransport::max_payload = %zu\n",
p->msg.data_length, t->get_max_payload());
return -1;
}
return 0;
}
int check_data(apacket *p)
{
unsigned count, sum;
unsigned char *x;
count = p->msg.data_length;
x = p->data;
sum = 0;
while(count-- > 0) {
sum += *x++;
}
if(sum != p->msg.data_check) {
return -1;
} else {
return 0;
}
}