platform_system_core/adb/adb.cpp

972 lines
32 KiB
C++
Raw Normal View History

/*
* Copyright (C) 2007 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#define TRACE_TAG TRACE_ADB
#include "sysdeps.h"
#include "adb.h"
#include <ctype.h>
#include <errno.h>
#include <stdarg.h>
#include <stddef.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/time.h>
#include <time.h>
#include <string>
#include <vector>
#include <unordered_map>
#include <base/logging.h>
#include <base/macros.h>
#include <base/stringprintf.h>
#include <base/strings.h>
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
#include "adb_auth.h"
#include "adb_io.h"
#include "adb_listeners.h"
#include "adb_utils.h"
#include "transport.h"
#define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0]))
#if !ADB_HOST
#include <cutils/properties.h>
#include <sys/capability.h>
#include <sys/mount.h>
#endif
ADB_MUTEX_DEFINE(D_lock);
int HOST = 0;
#if !ADB_HOST
const char* adb_device_banner = "device";
static android::base::LogdLogger gLogdLogger;
#endif
void AdbLogger(android::base::LogId id, android::base::LogSeverity severity,
const char* tag, const char* file, unsigned int line,
const char* message) {
android::base::StderrLogger(id, severity, tag, file, line, message);
#if !ADB_HOST
gLogdLogger(id, severity, tag, file, line, message);
#endif
}
void fatal(const char *fmt, ...) {
va_list ap;
va_start(ap, fmt);
fprintf(stderr, "error: ");
vfprintf(stderr, fmt, ap);
fprintf(stderr, "\n");
va_end(ap);
exit(-1);
}
void fatal_errno(const char* fmt, ...) {
va_list ap;
va_start(ap, fmt);
fprintf(stderr, "error: %s: ", strerror(errno));
vfprintf(stderr, fmt, ap);
fprintf(stderr, "\n");
va_end(ap);
exit(-1);
}
#if !ADB_HOST
static std::string get_log_file_name() {
struct tm now;
time_t t;
tzset();
time(&t);
localtime_r(&t, &now);
char timestamp[PATH_MAX];
strftime(timestamp, sizeof(timestamp), "%Y-%m-%d-%H-%M-%S", &now);
return android::base::StringPrintf("/data/adb/adb-%s-%d", timestamp,
getpid());
}
void start_device_log(void) {
int fd = unix_open(get_log_file_name().c_str(),
O_WRONLY | O_CREAT | O_TRUNC | O_CLOEXEC, 0640);
if (fd == -1) {
return;
}
// Redirect stdout and stderr to the log file.
dup2(fd, STDOUT_FILENO);
dup2(fd, STDERR_FILENO);
fprintf(stderr, "--- adb starting (pid %d) ---\n", getpid());
unix_close(fd);
}
#endif
int adb_trace_mask;
std::string get_trace_setting_from_env() {
const char* setting = getenv("ADB_TRACE");
if (setting == nullptr) {
setting = "";
}
return std::string(setting);
}
#if !ADB_HOST
std::string get_trace_setting_from_prop() {
char buf[PROPERTY_VALUE_MAX];
property_get("persist.adb.trace_mask", buf, "");
return std::string(buf);
}
#endif
std::string get_trace_setting() {
#if ADB_HOST
return get_trace_setting_from_env();
#else
return get_trace_setting_from_prop();
#endif
}
// Split the space separated list of tags from the trace setting and build the
// trace mask from it. note that '1' and 'all' are special cases to enable all
// tracing.
//
// adb's trace setting comes from the ADB_TRACE environment variable, whereas
// adbd's comes from the system property persist.adb.trace_mask.
static void setup_trace_mask() {
const std::string trace_setting = get_trace_setting();
std::unordered_map<std::string, int> trace_flags = {
{"1", 0},
{"all", 0},
{"adb", TRACE_ADB},
{"sockets", TRACE_SOCKETS},
{"packets", TRACE_PACKETS},
{"rwx", TRACE_RWX},
{"usb", TRACE_USB},
{"sync", TRACE_SYNC},
{"sysdeps", TRACE_SYSDEPS},
{"transport", TRACE_TRANSPORT},
{"jdwp", TRACE_JDWP},
{"services", TRACE_SERVICES},
{"auth", TRACE_AUTH}};
std::vector<std::string> elements = android::base::Split(trace_setting, " ");
for (const auto& elem : elements) {
const auto& flag = trace_flags.find(elem);
if (flag == trace_flags.end()) {
D("Unknown trace flag: %s\n", flag->first.c_str());
continue;
}
if (flag->second == 0) {
// 0 is used for the special values "1" and "all" that enable all
// tracing.
adb_trace_mask = ~0;
return;
} else {
adb_trace_mask |= 1 << flag->second;
}
}
}
void adb_trace_init(char** argv) {
// Don't open log file if no tracing, since this will block
// the crypto unmount of /data
const std::string trace_setting = get_trace_setting();
if (trace_setting.empty()) {
return;
}
#if !ADB_HOST
if (isatty(STDOUT_FILENO) == 0) {
start_device_log();
}
#endif
setup_trace_mask();
android::base::InitLogging(argv, AdbLogger);
}
apacket* get_apacket(void)
{
apacket* p = reinterpret_cast<apacket*>(malloc(sizeof(apacket)));
if (p == nullptr) {
fatal("failed to allocate an apacket");
}
memset(p, 0, sizeof(apacket) - MAX_PAYLOAD);
return p;
}
void put_apacket(apacket *p)
{
free(p);
}
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
void handle_online(atransport *t)
{
D("adb: online\n");
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
t->online = 1;
}
void handle_offline(atransport *t)
{
D("adb: offline\n");
//Close the associated usb
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
t->online = 0;
run_transport_disconnects(t);
}
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
#if DEBUG_PACKETS
#define DUMPMAX 32
void print_packet(const char *label, apacket *p)
{
char *tag;
char *x;
unsigned count;
switch(p->msg.command){
case A_SYNC: tag = "SYNC"; break;
case A_CNXN: tag = "CNXN" ; break;
case A_OPEN: tag = "OPEN"; break;
case A_OKAY: tag = "OKAY"; break;
case A_CLSE: tag = "CLSE"; break;
case A_WRTE: tag = "WRTE"; break;
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
case A_AUTH: tag = "AUTH"; break;
default: tag = "????"; break;
}
fprintf(stderr, "%s: %s %08x %08x %04x \"",
label, tag, p->msg.arg0, p->msg.arg1, p->msg.data_length);
count = p->msg.data_length;
x = (char*) p->data;
if(count > DUMPMAX) {
count = DUMPMAX;
tag = "\n";
} else {
tag = "\"\n";
}
while(count-- > 0){
if((*x >= ' ') && (*x < 127)) {
fputc(*x, stderr);
} else {
fputc('.', stderr);
}
x++;
}
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
fputs(tag, stderr);
}
#endif
static void send_ready(unsigned local, unsigned remote, atransport *t)
{
D("Calling send_ready \n");
apacket *p = get_apacket();
p->msg.command = A_OKAY;
p->msg.arg0 = local;
p->msg.arg1 = remote;
send_packet(p, t);
}
static void send_close(unsigned local, unsigned remote, atransport *t)
{
D("Calling send_close \n");
apacket *p = get_apacket();
p->msg.command = A_CLSE;
p->msg.arg0 = local;
p->msg.arg1 = remote;
send_packet(p, t);
}
static size_t fill_connect_data(char *buf, size_t bufsize)
{
#if ADB_HOST
return snprintf(buf, bufsize, "host::") + 1;
#else
static const char *cnxn_props[] = {
"ro.product.name",
"ro.product.model",
"ro.product.device",
};
static const int num_cnxn_props = ARRAY_SIZE(cnxn_props);
int i;
size_t remaining = bufsize;
size_t len;
len = snprintf(buf, remaining, "%s::", adb_device_banner);
remaining -= len;
buf += len;
for (i = 0; i < num_cnxn_props; i++) {
char value[PROPERTY_VALUE_MAX];
property_get(cnxn_props[i], value, "");
len = snprintf(buf, remaining, "%s=%s;", cnxn_props[i], value);
remaining -= len;
buf += len;
}
return bufsize - remaining + 1;
#endif
}
void send_connect(atransport *t)
{
D("Calling send_connect \n");
apacket *cp = get_apacket();
cp->msg.command = A_CNXN;
cp->msg.arg0 = t->get_protocol_version();
cp->msg.arg1 = t->get_max_payload();
cp->msg.data_length = fill_connect_data((char *)cp->data,
MAX_PAYLOAD_V1);
send_packet(cp, t);
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
}
// qual_overwrite is used to overwrite a qualifier string. dst is a
// pointer to a char pointer. It is assumed that if *dst is non-NULL, it
// was malloc'ed and needs to freed. *dst will be set to a dup of src.
// TODO: switch to std::string for these atransport fields instead.
static void qual_overwrite(char** dst, const std::string& src) {
free(*dst);
*dst = strdup(src.c_str());
}
void parse_banner(const char* banner, atransport* t) {
D("parse_banner: %s\n", banner);
// The format is something like:
// "device::ro.product.name=x;ro.product.model=y;ro.product.device=z;".
std::vector<std::string> pieces = android::base::Split(banner, ":");
if (pieces.size() > 2) {
const std::string& props = pieces[2];
for (auto& prop : android::base::Split(props, ";")) {
// The list of properties was traditionally ;-terminated rather than ;-separated.
if (prop.empty()) continue;
std::vector<std::string> key_value = android::base::Split(prop, "=");
if (key_value.size() != 2) continue;
const std::string& key = key_value[0];
const std::string& value = key_value[1];
if (key == "ro.product.name") {
qual_overwrite(&t->product, value);
} else if (key == "ro.product.model") {
qual_overwrite(&t->model, value);
} else if (key == "ro.product.device") {
qual_overwrite(&t->device, value);
}
}
}
const std::string& type = pieces[0];
if (type == "bootloader") {
D("setting connection_state to kCsBootloader\n");
t->connection_state = kCsBootloader;
update_transports();
} else if (type == "device") {
D("setting connection_state to kCsDevice\n");
t->connection_state = kCsDevice;
update_transports();
} else if (type == "recovery") {
D("setting connection_state to kCsRecovery\n");
t->connection_state = kCsRecovery;
update_transports();
} else if (type == "sideload") {
D("setting connection_state to kCsSideload\n");
t->connection_state = kCsSideload;
update_transports();
} else {
D("setting connection_state to kCsHost\n");
t->connection_state = kCsHost;
}
}
void handle_packet(apacket *p, atransport *t)
{
asocket *s;
D("handle_packet() %c%c%c%c\n", ((char*) (&(p->msg.command)))[0],
((char*) (&(p->msg.command)))[1],
((char*) (&(p->msg.command)))[2],
((char*) (&(p->msg.command)))[3]);
print_packet("recv", p);
switch(p->msg.command){
case A_SYNC:
if(p->msg.arg0){
send_packet(p, t);
if(HOST) send_connect(t);
} else {
t->connection_state = kCsOffline;
handle_offline(t);
send_packet(p, t);
}
return;
case A_CNXN: /* CONNECT(version, maxdata, "system-id-string") */
if(t->connection_state != kCsOffline) {
t->connection_state = kCsOffline;
handle_offline(t);
}
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
t->update_version(p->msg.arg0, p->msg.arg1);
parse_banner(reinterpret_cast<const char*>(p->data), t);
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
if (HOST || !auth_required) {
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
handle_online(t);
if (!HOST) send_connect(t);
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
} else {
send_auth_request(t);
}
break;
case A_AUTH:
if (p->msg.arg0 == ADB_AUTH_TOKEN) {
t->connection_state = kCsUnauthorized;
adb: Add public key authentification Secure adb using a public key authentication, to allow USB debugging only from authorized hosts. When a device is connected to an unauthorized host, the adb daemon sends the user public key to the device. A popup is shown to ask the user to allow debugging once or permanantly from the host. The public key is installed on the device in the later case. Other keys may be installed at build time. On the host, the user public/private key pair is automatically generated, if it does not exist, when the adb daemon starts and is stored in $HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed, the ADB_KEYS_PATH env variable may be set to a :-separated (; under Windows) list of private keys, e.g. company-wide or vendor keys. On the device, vendors public keys are installed at build time in /adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys. ADB Protocol change: If the device needs to authenticate the host, it replies to CNXN packets with an AUTH packet. The AUTH packet payload is a random token. The host signs the token with one of its private keys and sends an AUTH(0) packet. If the signature verification succeeds, the device replies with a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so that the host can retry with another private key. Once the host has tried all its keys, it can send an AUTH(1) packet with a public key as payload. adbd then sends the public key to the framework (if it has been started) for confirmation. Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 21:23:49 +02:00
t->key = adb_auth_nextkey(t->key);
if (t->key) {
send_auth_response(p->data, p->msg.data_length, t);
} else {
/* No more private keys to try, send the public key */
send_auth_publickey(t);
}
} else if (p->msg.arg0 == ADB_AUTH_SIGNATURE) {
if (adb_auth_verify(t->token, p->data, p->msg.data_length)) {
adb_auth_verified(t);
t->failed_auth_attempts = 0;
} else {
if (t->failed_auth_attempts++ > 10)
adb_sleep_ms(1000);
send_auth_request(t);
}
} else if (p->msg.arg0 == ADB_AUTH_RSAPUBLICKEY) {
adb_auth_confirm_key(p->data, p->msg.data_length, t);
}
break;
case A_OPEN: /* OPEN(local-id, 0, "destination") */
if (t->online && p->msg.arg0 != 0 && p->msg.arg1 == 0) {
char *name = (char*) p->data;
name[p->msg.data_length > 0 ? p->msg.data_length - 1 : 0] = 0;
s = create_local_service_socket(name);
if(s == 0) {
send_close(0, p->msg.arg0, t);
} else {
s->peer = create_remote_socket(p->msg.arg0, t);
s->peer->peer = s;
send_ready(s->id, s->peer->id, t);
s->ready(s);
}
}
break;
case A_OKAY: /* READY(local-id, remote-id, "") */
if (t->online && p->msg.arg0 != 0 && p->msg.arg1 != 0) {
if((s = find_local_socket(p->msg.arg1, 0))) {
if(s->peer == 0) {
/* On first READY message, create the connection. */
s->peer = create_remote_socket(p->msg.arg0, t);
s->peer->peer = s;
s->ready(s);
} else if (s->peer->id == p->msg.arg0) {
/* Other READY messages must use the same local-id */
s->ready(s);
} else {
D("Invalid A_OKAY(%d,%d), expected A_OKAY(%d,%d) on transport %s\n",
p->msg.arg0, p->msg.arg1, s->peer->id, p->msg.arg1, t->serial);
}
}
}
break;
case A_CLSE: /* CLOSE(local-id, remote-id, "") or CLOSE(0, remote-id, "") */
if (t->online && p->msg.arg1 != 0) {
if((s = find_local_socket(p->msg.arg1, p->msg.arg0))) {
/* According to protocol.txt, p->msg.arg0 might be 0 to indicate
* a failed OPEN only. However, due to a bug in previous ADB
* versions, CLOSE(0, remote-id, "") was also used for normal
* CLOSE() operations.
*
* This is bad because it means a compromised adbd could
* send packets to close connections between the host and
* other devices. To avoid this, only allow this if the local
* socket has a peer on the same transport.
*/
if (p->msg.arg0 == 0 && s->peer && s->peer->transport != t) {
D("Invalid A_CLSE(0, %u) from transport %s, expected transport %s\n",
p->msg.arg1, t->serial, s->peer->transport->serial);
} else {
s->close(s);
}
}
}
break;
case A_WRTE: /* WRITE(local-id, remote-id, <data>) */
if (t->online && p->msg.arg0 != 0 && p->msg.arg1 != 0) {
if((s = find_local_socket(p->msg.arg1, p->msg.arg0))) {
unsigned rid = p->msg.arg0;
p->len = p->msg.data_length;
if(s->enqueue(s, p) == 0) {
D("Enqueue the socket\n");
send_ready(s->id, rid, t);
}
return;
}
}
break;
default:
printf("handle_packet: what is %08x?!\n", p->msg.command);
}
put_apacket(p);
}
#if ADB_HOST
int launch_server(int server_port)
{
#if defined(_WIN32)
/* we need to start the server in the background */
/* we create a PIPE that will be used to wait for the server's "OK" */
/* message since the pipe handles must be inheritable, we use a */
/* security attribute */
HANDLE nul_read, nul_write;
HANDLE pipe_read, pipe_write;
HANDLE stdout_handle, stderr_handle;
SECURITY_ATTRIBUTES sa;
STARTUPINFOW startup;
PROCESS_INFORMATION pinfo;
WCHAR program_path[ MAX_PATH ];
int ret;
sa.nLength = sizeof(sa);
sa.lpSecurityDescriptor = NULL;
sa.bInheritHandle = TRUE;
/* Redirect stdin and stderr to Windows /dev/null. If we instead pass our
* stdin/stderr handles and they are console handles, when the adb server
* starts up, the C Runtime will see console handles for a process that
* isn't connected to a console and it will configure stderr to be closed.
* At that point, freopen() could be used to reopen stderr, but it would
* take more massaging to fixup the file descriptor number that freopen()
* uses. It's simplest to avoid all of this complexity by just redirecting
* stdin/stderr to `nul' and then the C Runtime acts as expected.
*/
nul_read = CreateFileW(L"nul", GENERIC_READ,
FILE_SHARE_READ | FILE_SHARE_WRITE, &sa,
OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL);
if (nul_read == INVALID_HANDLE_VALUE) {
fprintf(stderr, "CreateFileW(nul, GENERIC_READ) failure, error %ld\n",
GetLastError());
return -1;
}
nul_write = CreateFileW(L"nul", GENERIC_WRITE,
FILE_SHARE_READ | FILE_SHARE_WRITE, &sa,
OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL);
if (nul_write == INVALID_HANDLE_VALUE) {
fprintf(stderr, "CreateFileW(nul, GENERIC_WRITE) failure, error %ld\n",
GetLastError());
CloseHandle(nul_read);
return -1;
}
/* create pipe, and ensure its read handle isn't inheritable */
ret = CreatePipe( &pipe_read, &pipe_write, &sa, 0 );
if (!ret) {
fprintf(stderr, "CreatePipe() failure, error %ld\n", GetLastError() );
CloseHandle(nul_read);
CloseHandle(nul_write);
return -1;
}
SetHandleInformation( pipe_read, HANDLE_FLAG_INHERIT, 0 );
/* Some programs want to launch an adb command and collect its output by
* calling CreateProcess with inheritable stdout/stderr handles, then
* using read() to get its output. When this happens, the stdout/stderr
* handles passed to the adb client process will also be inheritable.
* When starting the adb server here, care must be taken to reset them
* to non-inheritable.
* Otherwise, something bad happens: even if the adb command completes,
* the calling process is stuck while read()-ing from the stdout/stderr
* descriptors, because they're connected to corresponding handles in the
* adb server process (even if the latter never uses/writes to them).
*/
stdout_handle = GetStdHandle( STD_OUTPUT_HANDLE );
stderr_handle = GetStdHandle( STD_ERROR_HANDLE );
if (stdout_handle != INVALID_HANDLE_VALUE) {
SetHandleInformation( stdout_handle, HANDLE_FLAG_INHERIT, 0 );
}
if (stderr_handle != INVALID_HANDLE_VALUE) {
SetHandleInformation( stderr_handle, HANDLE_FLAG_INHERIT, 0 );
}
ZeroMemory( &startup, sizeof(startup) );
startup.cb = sizeof(startup);
startup.hStdInput = nul_read;
startup.hStdOutput = pipe_write;
startup.hStdError = nul_write;
startup.dwFlags = STARTF_USESTDHANDLES;
ZeroMemory( &pinfo, sizeof(pinfo) );
/* get path of current program */
DWORD module_result = GetModuleFileNameW(NULL, program_path,
arraysize(program_path));
if ((module_result == arraysize(program_path)) || (module_result == 0)) {
// String truncation or some other error.
fprintf(stderr, "GetModuleFileNameW() failure, error %ld\n",
GetLastError());
return -1;
}
WCHAR args[64];
snwprintf(args, arraysize(args),
L"adb -P %d fork-server server", server_port);
ret = CreateProcessW(
program_path, /* program path */
args,
/* the fork-server argument will set the
debug = 2 in the child */
NULL, /* process handle is not inheritable */
NULL, /* thread handle is not inheritable */
TRUE, /* yes, inherit some handles */
DETACHED_PROCESS, /* the new process doesn't have a console */
NULL, /* use parent's environment block */
NULL, /* use parent's starting directory */
&startup, /* startup info, i.e. std handles */
&pinfo );
CloseHandle( nul_read );
CloseHandle( nul_write );
CloseHandle( pipe_write );
if (!ret) {
fprintf(stderr, "CreateProcess failure, error %ld\n", GetLastError() );
CloseHandle( pipe_read );
return -1;
}
CloseHandle( pinfo.hProcess );
CloseHandle( pinfo.hThread );
/* wait for the "OK\n" message */
{
char temp[3];
DWORD count;
ret = ReadFile( pipe_read, temp, 3, &count, NULL );
CloseHandle( pipe_read );
if ( !ret ) {
fprintf(stderr, "could not read ok from ADB Server, error = %ld\n", GetLastError() );
return -1;
}
if (count != 3 || temp[0] != 'O' || temp[1] != 'K' || temp[2] != '\n') {
fprintf(stderr, "ADB server didn't ACK\n" );
return -1;
}
}
#else /* !defined(_WIN32) */
char path[PATH_MAX];
int fd[2];
// set up a pipe so the child can tell us when it is ready.
// fd[0] will be parent's end, and fd[1] will get mapped to stderr in the child.
if (pipe(fd)) {
fprintf(stderr, "pipe failed in launch_server, errno: %d\n", errno);
return -1;
}
get_my_path(path, PATH_MAX);
pid_t pid = fork();
if(pid < 0) return -1;
if (pid == 0) {
// child side of the fork
// redirect stderr to the pipe
// we use stderr instead of stdout due to stdout's buffering behavior.
adb_close(fd[0]);
dup2(fd[1], STDERR_FILENO);
adb_close(fd[1]);
char str_port[30];
snprintf(str_port, sizeof(str_port), "%d", server_port);
// child process
int result = execl(path, "adb", "-P", str_port, "fork-server", "server", NULL);
// this should not return
fprintf(stderr, "OOPS! execl returned %d, errno: %d\n", result, errno);
} else {
// parent side of the fork
char temp[3];
temp[0] = 'A'; temp[1] = 'B'; temp[2] = 'C';
// wait for the "OK\n" message
adb_close(fd[1]);
int ret = adb_read(fd[0], temp, 3);
int saved_errno = errno;
adb_close(fd[0]);
if (ret < 0) {
fprintf(stderr, "could not read ok from ADB Server, errno = %d\n", saved_errno);
return -1;
}
if (ret != 3 || temp[0] != 'O' || temp[1] != 'K' || temp[2] != '\n') {
fprintf(stderr, "ADB server didn't ACK\n" );
return -1;
}
setsid();
}
#endif /* !defined(_WIN32) */
return 0;
}
#endif /* ADB_HOST */
// Try to handle a network forwarding request.
// This returns 1 on success, 0 on failure, and -1 to indicate this is not
// a forwarding-related request.
int handle_forward_request(const char* service, TransportType type, const char* serial, int reply_fd)
{
if (!strcmp(service, "list-forward")) {
// Create the list of forward redirections.
std::string listeners = format_listeners();
#if ADB_HOST
SendOkay(reply_fd);
#endif
SendProtocolString(reply_fd, listeners);
return 1;
}
if (!strcmp(service, "killforward-all")) {
remove_all_listeners();
#if ADB_HOST
/* On the host: 1st OKAY is connect, 2nd OKAY is status */
SendOkay(reply_fd);
#endif
SendOkay(reply_fd);
return 1;
}
if (!strncmp(service, "forward:", 8) || !strncmp(service, "killforward:", 12)) {
// killforward:local
// forward:(norebind:)?local;remote
bool kill_forward = false;
bool no_rebind = false;
if (android::base::StartsWith(service, "killforward:")) {
kill_forward = true;
service += 12;
} else {
service += 8; // skip past "forward:"
if (android::base::StartsWith(service, "norebind:")) {
no_rebind = true;
service += 9;
}
}
std::vector<std::string> pieces = android::base::Split(service, ";");
if (kill_forward) {
// Check killforward: parameter format: '<local>'
if (pieces.size() != 1 || pieces[0].empty()) {
SendFail(reply_fd, android::base::StringPrintf("bad killforward: %s", service));
return 1;
}
} else {
// Check forward: parameter format: '<local>;<remote>'
if (pieces.size() != 2 || pieces[0].empty() || pieces[1].empty() || pieces[1][0] == '*') {
SendFail(reply_fd, android::base::StringPrintf("bad forward: %s", service));
return 1;
}
}
std::string error_msg;
atransport* transport = acquire_one_transport(kCsAny, type, serial, &error_msg);
if (!transport) {
SendFail(reply_fd, error_msg);
return 1;
}
adb: win32: initial IPv6 support and improved Winsock error reporting Call getaddrinfo() for connecting to IPv6 destinations. Winsock APIs do not set errno. WSAGetLastError() returns Winsock errors that are more numerous than BSD sockets, so it really doesn't make sense to map those to BSD socket errors. Plus, even if we did that, the Windows C Runtime (that mingw binaries use) has a strerror() that does not recognize BSD socket error codes. The solution is to wrap the various libcutils socket_* APIs with sysdeps.h network_* APIs. For POSIX, the network_* APIs just call strerror(). For Windows, they call SystemErrorCodeToString() (adapted from Chromium). Also in this change: - Various other code was modified to return errors in a std::string* argument, to be able to surface the error string to the end-user. - Improved error checking and use of D() to log Winsock errors for improved debuggability. - For sysdeps_win32.cpp, added unique_fh class that works like std::unique_ptr, for calling _fh_close(). - Fix win32 adb_socketpair() setting of errno in error case. - Improve _socket_set_errno() D() logging to reduce confusion. Map a few extra error codes. - Move adb_shutdown() lower in sysdeps_win32.cpp so it can call _socket_set_errno(). - Move network_connect() from adb_utils.cpp to sysdeps.h. - Merge socket_loopback_server() and socket_inaddr_any_server() into _network_server() since most of the code was identical. Change-Id: I945f36870f320578b3a11ba093852ba6f7b93400 Signed-off-by: Spencer Low <CompareAndSwap@gmail.com>
2015-07-31 08:07:55 +02:00
std::string error;
InstallStatus r;
if (kill_forward) {
r = remove_listener(pieces[0].c_str(), transport);
} else {
adb: win32: initial IPv6 support and improved Winsock error reporting Call getaddrinfo() for connecting to IPv6 destinations. Winsock APIs do not set errno. WSAGetLastError() returns Winsock errors that are more numerous than BSD sockets, so it really doesn't make sense to map those to BSD socket errors. Plus, even if we did that, the Windows C Runtime (that mingw binaries use) has a strerror() that does not recognize BSD socket error codes. The solution is to wrap the various libcutils socket_* APIs with sysdeps.h network_* APIs. For POSIX, the network_* APIs just call strerror(). For Windows, they call SystemErrorCodeToString() (adapted from Chromium). Also in this change: - Various other code was modified to return errors in a std::string* argument, to be able to surface the error string to the end-user. - Improved error checking and use of D() to log Winsock errors for improved debuggability. - For sysdeps_win32.cpp, added unique_fh class that works like std::unique_ptr, for calling _fh_close(). - Fix win32 adb_socketpair() setting of errno in error case. - Improve _socket_set_errno() D() logging to reduce confusion. Map a few extra error codes. - Move adb_shutdown() lower in sysdeps_win32.cpp so it can call _socket_set_errno(). - Move network_connect() from adb_utils.cpp to sysdeps.h. - Merge socket_loopback_server() and socket_inaddr_any_server() into _network_server() since most of the code was identical. Change-Id: I945f36870f320578b3a11ba093852ba6f7b93400 Signed-off-by: Spencer Low <CompareAndSwap@gmail.com>
2015-07-31 08:07:55 +02:00
r = install_listener(pieces[0], pieces[1].c_str(), transport,
no_rebind, &error);
}
if (r == INSTALL_STATUS_OK) {
#if ADB_HOST
/* On the host: 1st OKAY is connect, 2nd OKAY is status */
SendOkay(reply_fd);
#endif
SendOkay(reply_fd);
return 1;
}
std::string message;
switch (r) {
case INSTALL_STATUS_OK: message = "success (!)"; break;
case INSTALL_STATUS_INTERNAL_ERROR: message = "internal error"; break;
case INSTALL_STATUS_CANNOT_BIND:
adb: win32: initial IPv6 support and improved Winsock error reporting Call getaddrinfo() for connecting to IPv6 destinations. Winsock APIs do not set errno. WSAGetLastError() returns Winsock errors that are more numerous than BSD sockets, so it really doesn't make sense to map those to BSD socket errors. Plus, even if we did that, the Windows C Runtime (that mingw binaries use) has a strerror() that does not recognize BSD socket error codes. The solution is to wrap the various libcutils socket_* APIs with sysdeps.h network_* APIs. For POSIX, the network_* APIs just call strerror(). For Windows, they call SystemErrorCodeToString() (adapted from Chromium). Also in this change: - Various other code was modified to return errors in a std::string* argument, to be able to surface the error string to the end-user. - Improved error checking and use of D() to log Winsock errors for improved debuggability. - For sysdeps_win32.cpp, added unique_fh class that works like std::unique_ptr, for calling _fh_close(). - Fix win32 adb_socketpair() setting of errno in error case. - Improve _socket_set_errno() D() logging to reduce confusion. Map a few extra error codes. - Move adb_shutdown() lower in sysdeps_win32.cpp so it can call _socket_set_errno(). - Move network_connect() from adb_utils.cpp to sysdeps.h. - Merge socket_loopback_server() and socket_inaddr_any_server() into _network_server() since most of the code was identical. Change-Id: I945f36870f320578b3a11ba093852ba6f7b93400 Signed-off-by: Spencer Low <CompareAndSwap@gmail.com>
2015-07-31 08:07:55 +02:00
message = android::base::StringPrintf("cannot bind to socket: %s",
error.c_str());
break;
case INSTALL_STATUS_CANNOT_REBIND:
message = android::base::StringPrintf("cannot rebind existing socket");
break;
case INSTALL_STATUS_LISTENER_NOT_FOUND:
message = android::base::StringPrintf("listener '%s' not found", service);
break;
}
SendFail(reply_fd, message);
return 1;
}
return 0;
}
#if ADB_HOST
static int SendOkay(int fd, const std::string& s) {
SendOkay(fd);
SendProtocolString(fd, s);
return 0;
}
#endif
int handle_host_request(const char* service, TransportType type,
const char* serial, int reply_fd, asocket* s) {
if (strcmp(service, "kill") == 0) {
fprintf(stderr, "adb server killed by remote request\n");
fflush(stdout);
SendOkay(reply_fd);
exit(0);
}
#if ADB_HOST
// "transport:" is used for switching transport with a specified serial number
// "transport-usb:" is used for switching transport to the only USB transport
// "transport-local:" is used for switching transport to the only local transport
// "transport-any:" is used for switching transport to the only transport
if (!strncmp(service, "transport", strlen("transport"))) {
TransportType type = kTransportAny;
if (!strncmp(service, "transport-usb", strlen("transport-usb"))) {
type = kTransportUsb;
} else if (!strncmp(service, "transport-local", strlen("transport-local"))) {
type = kTransportLocal;
} else if (!strncmp(service, "transport-any", strlen("transport-any"))) {
type = kTransportAny;
} else if (!strncmp(service, "transport:", strlen("transport:"))) {
service += strlen("transport:");
serial = service;
}
std::string error_msg;
atransport* t = acquire_one_transport(kCsAny, type, serial, &error_msg);
if (t != nullptr) {
s->transport = t;
SendOkay(reply_fd);
} else {
SendFail(reply_fd, error_msg);
}
return 1;
}
// return a list of all connected devices
if (!strncmp(service, "devices", 7)) {
bool long_listing = (strcmp(service+7, "-l") == 0);
if (long_listing || service[7] == 0) {
D("Getting device list...\n");
std::string device_list = list_transports(long_listing);
D("Sending device list...\n");
return SendOkay(reply_fd, device_list);
}
return 1;
}
// remove TCP transport
if (!strncmp(service, "disconnect:", 11)) {
const std::string address(service + 11);
if (address.empty()) {
// disconnect from all TCP devices
unregister_all_tcp_transports();
return SendOkay(reply_fd, "disconnected everything");
}
std::string serial;
std::string host;
int port = DEFAULT_ADB_LOCAL_TRANSPORT_PORT;
std::string error;
if (!parse_host_and_port(address, &serial, &host, &port, &error)) {
return SendFail(reply_fd, android::base::StringPrintf("couldn't parse '%s': %s",
address.c_str(), error.c_str()));
}
atransport* t = find_transport(serial.c_str());
if (t == nullptr) {
return SendFail(reply_fd, android::base::StringPrintf("no such device '%s'",
serial.c_str()));
}
unregister_transport(t);
return SendOkay(reply_fd, android::base::StringPrintf("disconnected %s", address.c_str()));
}
// returns our value for ADB_SERVER_VERSION
if (!strcmp(service, "version")) {
return SendOkay(reply_fd, android::base::StringPrintf("%04x", ADB_SERVER_VERSION));
}
// These always report "unknown" rather than the actual error, for scripts.
if (!strcmp(service, "get-serialno")) {
std::string ignored;
atransport* t = acquire_one_transport(kCsAny, type, serial, &ignored);
return SendOkay(reply_fd, (t && t->serial) ? t->serial : "unknown");
}
if (!strcmp(service, "get-devpath")) {
std::string ignored;
atransport* t = acquire_one_transport(kCsAny, type, serial, &ignored);
return SendOkay(reply_fd, (t && t->devpath) ? t->devpath : "unknown");
}
if (!strcmp(service, "get-state")) {
std::string ignored;
atransport* t = acquire_one_transport(kCsAny, type, serial, &ignored);
return SendOkay(reply_fd, t ? t->connection_state_name() : "unknown");
}
// indicates a new emulator instance has started
if (!strncmp(service, "emulator:", 9)) {
int port = atoi(service+9);
local_connect(port);
/* we don't even need to send a reply */
return 0;
}
#endif // ADB_HOST
int ret = handle_forward_request(service, type, serial, reply_fd);
if (ret >= 0)
return ret - 1;
return -1;
}