The old names seems confusing. output_thread was reading remote data and writing to
local sockets. input_thread was reading local sockets data and writing to remote.
This change tries to make it clear by renaming output_thread to read_transport thread,
and renaming input_thread to write_transport thread.
Change-Id: I2e7b4cde7a94d436f3745e9e3ab10780e7caa8ac
The existing format was unreadable; putting the pid and tid first helps
somewhat. Also remove the unused qemu tracing which wasn't called anywhere.
Change-Id: I37ef3c556fe17b237ba1d8ca3216e2155ce5d0de
Currently run_transport_disconnects() are called twice. One is in
handle_offline(), another is before destroying transport.
The users of disconnect callback are listener, adb_auth_client, and
remote_sockets. All of them need only to be called once. And after
handle_offline, no new listeners, adb_auth_client, or remote_sockets
can be connected to the offlined transport. So I think we can remove
the second call to run_transport_disconnects().
Change-Id: I1ef8b6b7b5ab7ae1bad109be107c85973d65a2e3
adb push was not returning a bad exit code when write_data_file() or
write_data_link() failed. I encountered this when running the unittest
on Windows which can get into situations where stat() succeeds, but
open() fails due to pre-existing exclusive file access (which typically
doesn't exist on unix).
The same code is used by adb install, so this also fixes its error
handling.
Fixed some fd leaks and propagation of errors when reading a file.
Fixed a unittest to close temp files before reading them.
Change-Id: Ieba0026fa4c79eb0484676e4f2faaac9603ef584
Signed-off-by: Spencer Low <CompareAndSwap@gmail.com>
The Python 2 subprocess class doesn't use Unicode, so as a work-around
write the command line to a UTF-8 batch file and run that.
I modified the test to use u'blah' without .encode('utf-8') because the
Python docs recommend dealing with string variables like that. When
formatting a string with a unicode parameter, use u'foo' on the constant
string to make it unicode.
I also tested this on Linux and it seems to work fine (I did ls in the
middle of the test to make sure the filenames came out right, etc.).
I had to close the temporary files before adb tries to read/write them
because filesystem semantics are different on Windows (technically I
might be able to modify adb to try to open files with more permissive
share flags, but then I'm not sure if Python uses the right share flags.
Basically, I'd be opening another can of worms.).
Fixed the test to delete a temp file on the device once it is done.
Change-Id: Id0c34e26d7697fbbb47a44ae45298bed5e8c59d6
Signed-off-by: Spencer Low <CompareAndSwap@gmail.com>
The function of remote_socket_disconnect() is to make sure
the local_sockets and remote_sockets are closed when the binded
transport is disconnected. However, as we call close_all_sockets()
in handle_offline(), we don't need remote_socket_disconnect() any more.
Change-Id: I575f632d9f8703149f34e0210eb698a56e2516a9
Transport atransport objects are semi-reference counted: the input and
output threads each hold a reference. The adb disconnect command was
calling transport_unref to release a reference that it never had in the
first place. This meant that the refcount dropped to zero and the object
was deleted before either the input or output thread released its
reference. When that last thread released its reference, it wrote to
freed memory and also sometimes crashed.
This fix is to not release any unheld reference, instead it just kicks
the transport to break remote_read in output_thread. So all transport
close flow goes the following way:
output_thread (exit) -> main thread (offline the transport) ->
input thread (exit) -> main thread (destroy the transport)
Change-Id: Iad1fe718acc8716f3a79c8c22b426a1b2450452c
When launching the adb server (typically from adb start-server),
redirect stdout/stderr to anonymous pipes which are read by threads in
the parent process, to make error diagnosis easier.
If there is an error during adb start-server, the output looks like:
> adb start-server
* daemon not running. starting it now on port 5037 *
error: could not blah # from server process
could not read ok from ADB Server # from launch_server
* failed to start daemon * # from adb_connect
error: cannot connect to daemon # from adb_commandline
Fix handle-leaks in launch_server by using new unique_handle class
that is based on std::unique_ptr.
In the server, close stdin and redirect to adb.log *before* sending the
ACK, so that any errors are reported early instead of after the ACK.
Change-Id: I943881210a0ea9458fc36851339f916c3d6a0830
Signed-off-by: Spencer Low <CompareAndSwap@gmail.com>
It is reported by tsan as a double checked locking. But I think
it is not a real data race. Because I think the old code is able
to make sure t->kick() is only called once, and the caller of
kick_transport is not relying on the side-effect of calling
t->kick().
But as it is not perf critical, I don't mind breaking the double
checked locking pattern.
Bug: 23385662
Change-Id: Ie3597dd56bb514117c3865d2afcfd7c115731a78
If s->peer->enqueue() failed, s may be freed. So we should use
saved_xxx instead of s->xxx before verifying the return value.
Change-Id: I6c072406dceb98e2d02798d0dcdc428fa99e66fb
As far as I can see, all asockets operations happen in fdevent_loop()
in the main thread, excepting close_all_sockets(). Instead of adding
lock and ref_count for each asocket, a simpler way would be moving
close_all_sockets() from input_thread to the main thread.
In input_thread(), there are two path to break the loop and call
close_all_sockets(). One path is when receiving offline A_SYNC, which
is sent by the main thread. The other path is when read_packet
fails, which I believe is almost not possible and doesn't matter
(Because t->fd is closed just before t is freed.). So I move
close_all_sockets() to handle_offline() in the main thread.
the socket_list_lock in sockets.cpp could be removed. But I prefer
to leave it for the following changes.
Bug: 6558362
Change-Id: I5da23f60a67a331262c62693b9b127fe2689c799
The error was this:
system/core/adb/usb_osx.cpp:203:74: error: values of type 'UInt32' should not
be used as format arguments; add an explicit cast to 'unsigned int' instead
[-Werror,-Wformat]
snprintf(devpathBuf, sizeof(devpathBuf), "usb:%" PRIu32 "X", locationId);
~~~ ^~~~~~~~~~
(unsigned int)
Which seems to be because on LP64 UInt32 is "unsigned int" but on LP32 it was
"unsigned long". We don't have to care about LP32, so -- if we can -- we're
probably better off just using uint32_t instead of UInt32.
Change-Id: I576f76cf2016ee59caccbc317ef74b6e8d71d722
In an earlier code review it was pointed out that there was something
very weird about fail_errno. It didn't seem to make sense that we'd
often try to continue after reporting failure. This patch cleans up
all that and assumes that if we've reported failure to the client,
we should stop what we're doing.
Bug: http://b/23437039
Change-Id: I39c38650ed9f9d5e30adbf68a7545c9e4a6ab812
We can double the speed of "adb sync" (on N9) if we increase SYNC_DATA_MAX
from 64KiB to 256KiB. This change doesn't do that, because I still haven't
managed to plumb through the information about whether we're a new adb/adbd
to file_sync_client.cpp and file_sync_service.cpp. But this is already a big
change with a lot of cleanup, so let's do the cleanup and worry about the
intended change another day...
This change does improve performance somewhat by halving the number of
lstat(2) calls made on the client side, and ensuring that most packets are
sent with a single write. This has the pleasing result of making the null
sync on an AOSP N9 go from just over 300ms to around 100ms, which means it
now seems instantaneous (https://en.wikipedia.org/wiki/Mental_chronometry).
Change-Id: If9f6d4c1f93ec752b95f71211bbbb1c513045166
adb on Windows uses \r\n line-endings, so take that into account when
parsing output for the exit code.
Change-Id: I6a3d7c5ca455b0f0f7dae174866857e0aeee9926
Signed-off-by: Spencer Low <CompareAndSwap@gmail.com>
This allows us to test for features explicitly rather than relying on
the protocol version number, allowing us to fall back gracefully if a
feature is not supported.
This will be needed for the upcoming shell upgrades for stdout/stderr
separation and exit code reporting.
Change-Id: Ibb1d8ad2611f7209901ee76d51346b453e9c5873
