Bug: 111434128, 119493510, 119494503
Test: Enable wireless debugging in Settings UI, click "pair with pairing code"
to generate pairing code.
On client, 'adb pair <ip_address>', enter pairing code at prompt and hit
enter. Pairing should complete.
'adb logcat'.
Change-Id: I86527bd3fc52e30a8e08ec5843dc3e100abf91fa
Exempt-From-Owner-Approval: approved already
adb was already using ConsumePrefix, and now we have another would-be
user in cutils. (There appears to be one place in adb that should use
ConsumeSuffix, so I'm assuming we'll want that sooner or later.)
I've kept these inline because adb and google3's versions both were, and
I'm easily led.
Test: treehugger
Change-Id: I29d99032f6f6ccbfaefece59725db8afb02a4c87
unique_fd's implicit conversion to int allows the following code to
compile without error, leading to a double close:
std::function<void(unique_fd)> func = [](int x) { close(x); };
func(unique_fd(42));
Test: treehugger
Change-Id: I948ecda3a12738b3af6444fe2902d2f7b80e1b4c
This CL adds client support to recognize the rescue mode (which will be
served by recovery image). It also allows waiting for a device to enter
rescue mode. The support for the actual rescue commands will be added in
follow-up CLs.
Bug: 128415917
Test: `adb devices` recognizes devices under rescue mode.
Test: `adb wait-for-rescue` waits for device to be in rescue mode.
Change-Id: I367d7339fe68006aba09a1e3db6370d472296676
When a function argument takes a std::string, it's inefficient to
pass std::string::c_str(), since that creates an additional copy.
So we change these calling sites.
Test: TreeHugger
Change-Id: I1c0fde7275eb3ebd3baf05ec62581b0243655608
This will make it easier to add new types of transports by combining the
logic the adb server and adb daemon use to connect to things.
Bug:121166534
Test: adb connect against a cuttlefish instance over the shm proxy.
Change-Id: Ic7fc848c60a85eef968c3735838c87cb7fdaf38b
Let minadbd override daemon services by pulling out the daemon services
into a separate translation unit, that isn't compiled into libadbd.
Bug: http://b/111831478
Test: mma
Change-Id: Iecfebea371e03864108eca9a4d2e9cfd5db34749
Replace all usages of android::base::unique_fd with the unique_fd from
adb_unique_fd.h, which calls adb_close instead of close on Windows.
Most of these changes are no-ops, except for the ones to
create_service_thread, which was probably pretty broken on Windows.
Test: python test_device.py
Test: adb_test
Test: wine adb_test.exe
Change-Id: Ia4d03f9e2e7ddc88c97dc64172d721f93f3bf853
This change removes the void* argument passing and instead uses C++11
features to avoid having to handle memory manually.
Bug: None
Test: python ./system/core/adb/test_device.py
Change-Id: I6380245b2ca583591810e3e363c67c993a107621
Track pending fdevents, and abort if we see an fdevent ready for
read/write for 5 minutes continuously.
Also, add a service that intentionally starts spinning, to test this.
Test: manually changed timeout to a minute, `adb raw spin`
Change-Id: Ibfa5e7e654996587f745887cb04987b982d79bed
When using "adb remount" on a deduplicated filesystem, the current
response is a warning that the remount will not work. This patch
allows the user to specify an -R option. This option will reboot to recovery,
run e2fsck to undo deduplication, and then reboot the device where "adb
remount" will then succeed.
In addition, if verity needs to be disabled to remount, it will be disabled in
the same reboot cycle to minimize reboots.
Bug: 64109868
Test: adb remount -R on a deduplicated filesystem
Change-Id: I812407499b2df6f4d2509e8d51878117108a6849
Plumb the transport that we received the adb reverse request on through
to reverse_service, instead of trying to get a unique transport on
devices that have multiple active transports (e.g. a device with USB
(even unplugged) connected via TCP).
Bug: http://b/37066218
Bug: http://b/71898863
Test: `echo foo | nc -l 12345 & adb reverse tcp:12345 tcp:12345; adb shell nc localhost 12345` on a device connected via TCP
Change-Id: Iae199ae787f2e344126bbcacca8544cfc9844a4c
If create_service_thread fails, we'll leak `arg`.
This fixes a static analyzer complaint:
system/core/adb/services.cpp:298:13: warning: Potential leak of memory
pointed to by 'arg'
Bug: None
Test: Reran the static analyzer. No more complaints about this leak.
Change-Id: I5aec7fd78f2cc775b650501b02bdf0039d1647ca
As step one of refactoring atransport to separate out protocol handling
from its underlying connection, extract atransport's existing
hand-rolled connection vtable out to its own abstract interface.
This should not change behavior except in one case: emulators are
now treated as TCP devices for the purposes of `adb disconnect`.
Test: python test_device.py, with walleye over USB + TCP
Test: manually connecting and disconnecting devices/emulators
Change-Id: I877b8027e567cc6a7461749432b49f6cb2c2f0d7
Name each service thread specifically to improve debuggability.
Bug: http://b/65648324
Test: adb shell debuggerd -b `adb shell pidof adbd` during a sync
Change-Id: I644e25fc2f14a26eafd19f596e4e8f3c2bb79967
For reboot [reboot_arg] requests via either reboot or adb reboot,
if reboot_arg is empty then report "shell" or "adb" respectively.
Test: boot_reason_test.sh shell_reboot adb_reboot
Bug: 63736262
Change-Id: Ie613d9e62db6a705885e4e7520aede27af3aa1b9
Extend device selection to allow selecting a specific transport via
monotonically increasing identifier (visible in devices -l).
This is useful when using multiple devices (like hikey960...) that
have identical bogus serial numbers like 0123456789ABCDEF.
Bug: http://b/37043226
Test: adb -t {1, 2, 9999999} {get-serialno, shell, features}
Change-Id: I55e5dc5a406a4eeee0012e39b52e8cd232e608a6
When device goes offline, user usually has to manually replug the
usb device. This patch tries to solve two offline situations, all
because when adb on host is killed, the adbd on device is not notified.
1. When adb server is killed while pushing a large file to device,
the device is still reading the unfinished large message. So the
device thinks of the CNXN message as part of the previous unfinished
message, so it doesn't reply and the device is in offline state.
The solution is to add a write_msg_lock in atransport struct. And it
kicks the transport only after sending a whole message. By kicking
all transports before exit, we ensure that we don't write part of
a message to any device. So next time we start adb server, the device
should be waiting for a new message.
2. When adb server is killed while pulling a large file from device,
the device is still trying to send the unfinished large message. So
adb on host usually reads data with EOVERFLOW error. This is because
adb on host is reading less than one packet sent from device.
The solution is to use buffered read on host. The max packet size
of bulk transactions in USB 3.0 is 1024 bytes. By preparing an at least
1024 bytes buffer when reading, EOVERFLOW no longer occurs. And teach
adb host to ignore wrong messages.
To be safe, this patch doesn't change any logic on device.
Bug: http://b/32952319
Test: run python -m unittest -q test_device.DeviceOfflineTest
Test: on linux/mac/windows with bullhead, ryu.
Change-Id: Ib149d30028a62a6f03857b8a95ab5a1d6e9b9c4e
- moved __android_log_is_debuggable to a new public header
(log_properties.h)
- vendor version of sched_policy uses ALOG* instead SLOG*
Test: (sanity) liblog-unit-tests
Test: (sanity) libcutils_test (noting b/b/32972117, two tests continue
to fail)
Test: system/core as a whole makes with BOARD_VNDK_VERSION := current
now with no problems.
Test: boots/works on internal marlin
Bug: 33241851
(cherry picked from commit 1f83aa424f)
Merged-In: I5bc1f348dc0f0c8814bec5b5c3d2c52c825ab640
Change-Id: I5bc1f348dc0f0c8814bec5b5c3d2c52c825ab640
We have std::thread now, so we can delete this cruft.
Test: python test_device.py
Test: adb_test
Test: wine adb_test.exe
Test: /data/nativetest/adbd_test/adbd_test
Change-Id: Ie1c1792547b20dec45e2a62ce6515fcb981c3ef8
Test: Was able to discover a raspberry pi.
Bug: 28074466
(cherry picked from e292cd16760321fccc99c8c261cb92fa4b6462ab)
Change-Id: Id9571576457a4a0a078e48a274a4e8eac78bfe2b
We used to write the command file (/cache/recovery/command) to trigger
the sideload mode. A/B devices don't support that (may not have /cache
paritition). This CL switches to using libbootloader_message which
writes the command to BCB (bootloader control block) instead.
Test: "adb root && adb reboot sideload" reboots sailfish into recovery
sideload mode.
Change-Id: I158fd7cbcfa9a5d0609f1f684a2d03675217628f
Move the logic for string socket specification out to separate
functions to facilitate using arbitrary sockets for the adb command
socket.
Bug: http://b/30445394
Change-Id: Icd8fdb853272edc029fb3a0f5b18e941dc8ef52c
Test: adb_test, adbd_test, test_device.py
Add reconnect command for debugging. `reconnect` kicks a transport
from the host side, `reconnect device` kicks a transport from
the device side. They can be used to produce transport errors.
Bug: 25935458
Change-Id: I47daa338796b561941e7aba44a51a6dd117d1e98
Currently adb only realizes a TCP transport has gone away when it tries
to send a packet, which caused problems in particular for `adb reboot`
since no packets are sent, leading to the client hanging until Ctrl+C.
This CL turns on TCP keepalive packets to send 1 packet every second,
allowing up to 10 failures before disconnecting. Using built-in TCP
functionality turns out to be much cleaner in this case than trying to
implement our own keepalive packets at the application layer, and
should be more lightweight since it's all done in the TCP stack.
Bug: http://b/23093474
Change-Id: Ifb41cbb85b9752a9f394e1eed3c6ac4da47a4e4d
Windows restricts the return value of threads to 32-bits, even on 64-bit
platforms. Since we don't actually return meaningful values from thread,
resolve this inconsistency with POSIX by making adb's thread abstraction
only take void functions.
Change-Id: I5c23b4432314f13bf16d606fd5e6b6b7b6ef98b5
This CL moves the network address parsing function from adb to libbase
so that it can be used by fastboot as well as adb.
libbase seemed like the right choice because:
1. It already has some parsing functions (parseint)
2. The net address parsing function uses the libbase string
functions so we have a libbase dependency anyway.
The parsing function has been modified slightly to make the canonical
address optional, and debug logging on success has been removed.
For adb the only functional difference is that parsing a network
address will no longer print the result to the debug log, which seemed
unnecessary.
Bug: http://b/26236380
Change-Id: Ife6df02937225fc66de87884d3572d79c092c522
Without -s argument, adb wait-for-device will make a call to
acquire_one_transport() with sinfo->serial.c_str() == "".
Waiting for acquire_one_transport() to be reworked to use std::string
rather than const char * for serial, work around this by passing NULL
when sinfo->serial is not initialized in host_service_to_socket().
Change-Id: Ifef53e0e82850364f5029ee36560376f2a4a5104
Signed-off-by: Leo Sartre <leox.sartre@intel.com>
The current implementation of the host commands "adb wait-for-*" allows
to specify only the transport layer (local, usb or any).
This patch allows the specification of the expected device state
(bootloader, recovery, device or sideload), this is usefull for
scripting purposes.
Use case:
$ adb reboot sideload-auto-reboot
$ adb wait-for-usb-sideload && adb sideload package.zip
Change-Id: I276a6be4d82f8b7901f74e1e5395b86d16548e8f
Signed-off-by: Leo Sartre <leox.sartre@intel.com>
