We originally included a warning to not invoke restorecon_recursive
with a path leading to a shell-writable or app-writable directory
due to concerns about the potential for mischief with symlinks during
the restorecon_recursive. However, this warning was never necessary for
calling restorecon_recursive during system initialization before an adb
shell or app can run, and we have further prohibited init from
reading/following symlinks that can be created by shell or apps in
policy, so this warning is superfluous. It also contradicts current
usage of restorecon_recursive in rootdir/init.rc, since it is called
there on /data.
Change-Id: I28a635e0b5991ced8adcef93e7a04f9d9e5634fd
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Need to not set this property) during mount, since it can't
be changed later (ro property)
Also no reason to start class main on encryption cycle - we'll
show surfaceflinger, which is enough UI for this short cycle.
Bug: 17041092
Change-Id: Ica5339c54e45716d0fe20e23c0ab857f388d23ed
Make sure to call _exit instead of exit to avoid triggering exit
handlers that may have existed in the parent process.
Print out a log message when forking to process firmware events fails.
Change-Id: I2436bdf85d9a8ea26b718e62023f1dac89864667
Ideally bootchart collects system data every BOOTCHART_POLLING_MS ms.
However, the current bootchart pacing logic would collect data every
time the main loop in init.c is executed. This results in:
1. Multiple data samples being taken consecutively or prematurely. In
many cases, these data samples have the same timestamp (in jiffies).
The off-line data processing tool would complain about dividing by
zero "interval" and bail out.
2. Because of the ineffective pacing, bootchart data collection would
terminate prematurely. The total duration of data collection is usually
much shorter than what the user specifies.
The fix is to check whether BOOTCHART_POLLING_MS ms has elapsed
before taking a new data sample. For this purpose, /proc/uptime
is used to get the time values, consistent with the precision of
bootchart timestamps.
Change-Id: I106bf91dbda01059b719df6c73b8bd1cd54a64f0
Signed-off-by: Bo (Andover) Zhang <zhang@broadcom.com>
Move the unlink out of init.c and into init.rc, so that the file
will be removed after all the filesystems with firmware are up.
Change-Id: Ifdd5dd1e95d7e064dde5c80b70198882d949a710
Move the unlink out of init.c and into init.rc, so that the file
will be removed after all the filesystems with firmware are up.
Change-Id: I7442df2042cc2788d0301f00e3c2fba7d6e0e1c7
The init process allows environment variables to be specified in
the rc script globally, via 'export', and for a specific process,
via the 'setenv' option.
However, the mechanism for assembling the environment simply
appended the new variable without checking whether it was already
defined, so it was not possible to overwrite an existing entry.
This patch fixes that behaviour.
Limitations and concerns:
The limit of a maximum number of 31 variables is unchanged.
Currently, most callers of "add_environment" do not check the return
value, but the function now logs the failure rather than failing
silently.
Change-Id: Ie9a68c37a0f55c5b40e904e695cd35514f67f480
Currently, the fixup code in fixup_sys_perms() scans through all
entries in uevent*.rc. If it finds a match, then it performs a fixup.
If there's no match in that file, no fixup is performed.
SELinux file labels are independently stored in /file_contexts,
with no relationship to the files in /ueventd.rc. Even when no
entries exist in ueventd.rc, we still want to fixup the SELinux
file label in /sys when a uevent message occurs.
Change-Id: I0ccb5395ec0be9282095b844a5022e8c0d8903ac
If the encryptable partition is wiped (4KB worth of 0 or 0xff),
then reboot into recovery to format /data+/cache
This is while waiting for the Mac OS support to format f2fs.
The flashstation running on Mac OS will currently just erase userdata
and not format it with f2fs.
Bug: 15720406
Bug: 15747366
Change-Id: Ib7cca3e1701483a09573457a835750f34da71ee0
Move the code that attempts to mount alternative fstab entries
into its own function.
Clarify return codes.
Suggest wipe via recovery in error messages.
Bug: 15747366
Change-Id: I3634477cd4d1d73f974f3e906c53285f0d9e0eac
Signed-off-by: JP Abgrall <jpa@google.com>
+ Add a new property, sys.init_log_level, which can be set after init
bootstrap. This will control the level at which init does prints to klog.
Change-Id: Ia15b2110157b5e6b713785ece9b0fb94889be6c8
+ Make prints of rc commands significantly more verbose. All commands
will log all arguments, file/line number of the command, return value,
and parent action which triggered the command.
init: command 'mount tmpfs tmpfs /mnt/obb mode=0755,gid=1000' action=init
status=0 (/init.rc:89)
init: command 'setprop net.tcp.default_init_rwnd 60' action=boot status=0
(/init.rc:403)
Change-Id: I5498c7258e4891706be4a12546df4231d14d86c4
We already do this for init, but had failed to do it for ueventd
and could not capture any logging from libselinux calls made by
ueventd.
Truly enabling non-error logging also requires uncommenting a line
in Android.mk:
LOCAL_CFLAGS += -DLOG_UEVENTS=1
which enables other logging and sets the default log level to INFO,
or otherwise changing the klog level in the ueventd code (is not
settable by init.rc loglevel).
Change-Id: I00e6f9d6271f2a21d9078c96368816d74d6d2850
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Add the ability to boot up directly from charger mode, instead of forcing
charger mode to initiate a full restart to launch 'full' android. This
should shave a few seconds off of boot time on supported devices (just
manta for now).
Change-Id: Ieec4494d929e92806e039f834d78b9002afd15c4
The sysfs nodes can change from devices to devices for
a particular class of peripheral. Some of them even change
after suspend/resume, e.g. rfkill for USB bluetooth adapters.
This patch adds to the way how ueventd rules with wildcard are
handled. In addition to matching the prefix with a trailing
wildcard, now rules can have wildcard anywhere in the rule.
The wildcard matching is implemented using fnmatch(), where
its matching is simliar to shell pathname expansion. It suits
this particular usage model well. To avoid abuse, the number of
slashes has to match between path name and the rule.
For example, instead of creating a rule to match:
/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/bluetooth/hci0/rfkill*
, this would suffice:
/sys/devices/pci0000:00/0000:00:1d.0/*/*/*/*/bluetooth/hci0/rfkill*
The prefix matching behavior is retained, such that those
rules do not have to pay for processing penalty with fnmatch().
Change-Id: I3ae6a39c838f6d12801cb71958e481b016f731f5
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Don't force people to make modifications to property_service.c
when handling properties. Exclusively use the SELinux rules,
which are more flexible and easily adjusted.
Change-Id: Ic0bbd01b5df2eef0040286ac59c0a01e9bd14315
When ueventd creates a device node, it may also create one or more
symlinks to the device node. These symlinks may be the only stable
name for the device, e.g. if the partition is dynamically assigned.
A corresponding change with the same Change-Id to external/libselinux
introduces selabel_lookup_best_match() to support looking up the "best match"
for a device node based on its real path (key) and any links to it
(aliases). This change updates ueventd to use this new interface
to find the best match for the device node when creating it.
Change-Id: Id6c2597eee2b6723a5089dcf7c450f8d0a4128f4
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Only parse and honor the kernel command line on userdebug
or eng builds. On user builds, assume that selinux is always enabled
and enforcing.
Change-Id: I71c66e4365bdf2f226800634126a38b716d96599
