Some devices have modules.alias and modules.dep for modprobe and other
purposes but do not want to opt into ueventd auto loading their
modules. Therefore we add a flag that can be added to ueventd
configuration files to opt into this behavior.
Bug: 111916071
Bug: 112048758
Test: check that modules are loaded with this opt-in
Test: check that modules are not loaded without this opt-in
Change-Id: Ifb281b273059b4671eea1ca5bc726c9e79f3adfb
Since some vendors will have firmware in mount points in
/mnt/vendor/..., we extend the ueventd script language to allow
specifying the firmware directories.
Also, move the existing 4 directories to ueventd.rc as a primary user
of this mechanism.
Bug: 111337229
Test: boot sailfish; firmwares load
Change-Id: I0854b0b786ad761e40d2332312c637610432fce2
During uevent processing, some "by-name" symlinks will be created.
/dev/block/<type>/<device>/by-name/<partition>
<type> can be: platform, pci or vbd.
<device> might be: soc.0/f9824900.sdhci, soc.0/f9824900.sdhci, etc.
<partition> might be: system, vendor, system_a, system_b, etc.
e.g., on a non-A/B device:
/dev/block/platform/soc.0/f9824900.sdhci/by-name/system
/dev/block/platform/soc.0/f9824900.sdhci/by-name/vendor
On a A/B device:
/dev/block/platform/soc/1da4000.ufshc/by-name/system_a
/dev/block/platform/soc/1da4000.ufshc/by-name/system_b
/dev/block/platform/soc/1da4000.ufshc/by-name/vendor_a
/dev/block/platform/soc/1da4000.ufshc/by-name/vendor_b
However, those symlinks are "device-specific".
This change adds the "generic" symlinks in ueventd, in addition to
the existing symlinks, when the possible "boot devices" are specified
in device tree. e.g.,
&firmware_android {
compatible = "android,firmware";
boot_devices ="soc/1da4000.ufshc,soc.0/f9824900.sdhci";
}
The following symlinks will then be created on the aforementioned non-A/B
and A/B devices, respectively.
/dev/block/by-name/system
/dev/block/by-name/vendor
/dev/block/by-name/system_a
/dev/block/by-name/system_b
/dev/block/by-name/vendor_a
/dev/block/by-name/vendor_b
Note that both <type> and <device> are skipped in the newly create symlinks.
It assumes there is no more than one devices with the same <partition>,
which is the assumption of current first stage mount flow.
Finally, when 'boot_devices' in DT is absent, it fallbacks to extract
'boot_devices' from fstab settings. e.g., using 'soc/1da4000.ufshc',
'soc.0/f9824900.sdhci' for a fstab with the following content:
/dev/block/platform/soc/1da4000.ufshc/by-name/system
/dev/block/platform/soc.0/f9824900.sdhci/by-name/vendor
Bug: 78613232
Test: adb shell ls /dev/block/by-name
Change-Id: Iec920b5a72409b6a2bdbeeb290f0a3acd2046b5d
1) Check subsystems list before doing usb subsystem logic. This allows
developers to handle usb* subsystems in ueventd.rc files.
2) Fix a bug where each subsystem_ instance is not reinitialized, but
rather only the name_ member was set.
Test: boot bullhead
Test: check that multiple uevent_devname subsystems work when
specified in ueventd.rc
Change-Id: Ifcac04763afcaf72a3b14ef5f3a6cb89981b51a1
This change splits out the selinux initialization and supporting
functionality into selinux.cpp and splits the security related
initialization of the rng, etc to security.cpp. It also provides
additional documentation for SEPolicy loading as this has been
requested by some teams.
It additionally cleans up sehandle and sehandle_prop. The former is
static within selinux.cpp and new wrapper functions are created around
selabel_lookup*() to better serve the users. The latter is moved to
property_service.cpp as it is isolated to that file for its usage.
Test: boot bullhead
Merged-In: Idc95d493cebc681fbe686b5160502f36af149f60
Change-Id: Idc95d493cebc681fbe686b5160502f36af149f60
While refactoring ueventd, I was looking for code the character device
symlinks (/dev/usb/*) that ueventd creates, such that I could test it
on a real device. I found none in our tree, and history showing Xoom,
which was last supported years ago, was the last user. If this code
is in fact obsolete, let's remove it.
Test: boot bullhead
Test: init unit tests
Change-Id: I601f7165eb06d36b31b6dcf69ee9e0a449d81a96
In order to create symlinks for USB and block devices, the path for
their parent platform device must be known.
Previously, ueventd would save each platform device that it encounters
to a list and query this list when creating the symlinks. That,
however, is racy because the uevent socket does not differentiate
uevents from RegenerateUevents() and uevents sent by the kernel when
probing a device first the first time. The below scenario is the
faulty case:
1) Kernel probes parent platform device for a block device
2) ueventd calls RegenerateUevents() and starts processing uevents
3) Kernel probes block device and sends its uevents
4) ueventd picks up the block device uevent during its uevent processing,
without yet regenerating the platform device uevent, causing improper
symlinks to be created.
This change stops storing the platform devices in a list, and instead
traverses up the directory structure for each USB or block device
until it reaches a platform device, defined as one whose subsystem is
the platform bus. This fixes the race and simplifies the ueventd
code.
Bug: 62436493
Bug: 62681642
Test: Boot bullhead
Test: Boot sailfish
Test: Init unit tests
Test: Boot hikey + hotplug/unplug sdcard
Change-Id: I21636355d8e434f30e0cba568598a6cf139e67f9
fork() subprocesses to handle uevents in parallel.
This reduces coldboot time on bullhead from ~446ms to ~230ms.
This reduces coldboot time on sailfish from ~690ms to ~360ms.
This reduces coldboot time on ryu from ~187ms to ~122ms.
Bug: 33785894
Test: boot bullhead x40, observe no major differences in /dev and /sys
Test: boot sailfish x40, observe no major differences in /dev and /sys
Test: boot ryu x40, observe no major differences in /dev and /sys
Test: boottime tests on bullhead and sailfish
Test: init unit tests
Change-Id: Ie2f63e000b8af78d187477d31fe109f20304d749
devices.cpp handles too many things for creating one class. This
change breaks it up into various files and classes.
* Parsing is moved to ueventd_parser.cpp
* Reading from the uevent socket and Cold booting is moved to a
UeventListener class, in uevent_listener.cpp
* Firmware handling is moved to firmware_handler.cpp
* The remaining contents form a DeviceHandler class within devices.cpp
Bug: 33785894
Test: boot bullhead x40, observe no major differences in /dev and /sys
Test: boot sailfish x40, observe no major differences in /dev and /sys
Test: init unit tests
Change-Id: I846a2e5995fbb344c7a8e349065c18a934fa6aba
Previously init_parser.cpp was made generic and capable of parsing any
number of differently named 'sections' or prefixed lines. We now use
these capabilities to do the parsing for ueventd.
Bug: 36250207
Bug: 33785894
Test: boot bullhead and ensure the right /dev nodes exist
with the right permissions set
Test: verify no boot time difference
Change-Id: I698ca962d414f8135af32f6c9cd778841b2b8b53
Create classes for dev and sys permissions and store these permissions
in std::vector instead of the C list.
Test: boot bullhead
Test: init unit tests
Change-Id: I874039a3db29b4c70149506da8e407123ab7eca2
Also simplify this code a bit.
There's only one consumer that removes the /devices/platform prefix,
so have them handle it instead of storing two copies of the string.
Remove an unneeded search for '/' in get_character_device_symlinks()
as a / will always be the next character after a parent path, by
nature of FindPlatformDevice().
Test: boot bullhead
Test: init unit tests
Change-Id: I9d0482d137b1342ae7509ae993ff99198be814f0
Additionally replace the associated C string parsing with C++ and write
unit tests.
Bug: 33785894
Bug: 36250207
Test: Boot bullhead + unit tests
Change-Id: Iee1f72d248bca3bd2e1227045628935b3dd6195a
Remove includes of "log.h" that really want <android-base/logging.h>
Fix header include order
Remove headers included in .cpp files that their associated .h already includes
Remove some unused headers
Test: boot bullhead
Change-Id: I2b415adfe86a5c8bbe4fb1ebc53c7b0ee2253824
This is done by parsing 'androidboot.fstab=<fstab>' kernel cmdline
option to get the fstab file that *only* specifies partitions to be
mounted early (i.e. in init's first stage).
Note that, the same fstab file may not be used as an argument to
mount_all later in the boot as that will cause fs_mgr to fail with
EBUSY.
TODO:
- Possibly add a new mount_mode so the same fstab can be used for
early_mount, 'mount_all --early/--late' etc.
- Add support for dm-verity enabled partitions to mount early.
- Add support for getting fstab arguments through DT instead of kernel
cmdline.
Bug: 27805372
Test:
Boot angler by passing a seperate fstab file using the kernel
cmdline option to mount vendor partition early, remove the vendor
partition entry from the main fstab file for the test.
Boot sailfish by passing a seperate fstab entry via device tree
to mount vendor partition early. Remove vendor partition entry from
the main fstab file for the test
Change-Id: I18785b893c54c8cee960ab44d5e8f83e5d624aa8
Signed-off-by: Sandeep Patil <sspatil@google.com>
keeps parts of the code that are still needed for the fs_mgr
+ dt based implementation
b/27805372
Test: boot angler, sailfish without regressions
Change-Id: I1b08f8b7b4f2e67118d328443a5011c0f5ead919
Signed-off-by: Sandeep Patil <sspatil@google.com>
We don't want to spend time creating devices that are unncessesary
during early (init first-stage) mount. So, refactor the devices code
tha allows us to call into coldboot and has the
- ability to only create devices that are specified by the caller
- ability to stop coldboot cycle when all devices that the caller is
interested in
- ability to run coldboot for a specific syspath
- ability to run ueventd code unmodified
Test: Tested boot on angler, sailfish
Change-Id: Id8f3492380696760414eadc20d624d300c904f8e
Signed-off-by: Sandeep Patil <sspatil@google.com>
Right now these two partitions are mounted in the fs stage of the init
process. As a result, many vendor/ODM files needed earlier in the boot
process (e.g., init.<hardware>.rc, fstab.<hardware>.rc,
uevent.<hardware>.rc, SELinux policy files etc) can only live on the root
partition.
To prevent vendors/ODMs from polluting the root partition, this patch makes
it possible to mount the vendor and ODM partitions in the first stage of the
init process. The fstab info of both partitions to be mounted early is
composed from new kernel cmdline arguments android.early.prefix and
android.early.fstab.
For example, with:
android.early.prefix=/sys/devices/1010000.msdc0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/
android.early.fstab=mmcblk0p10+/odm+ext4+ro+verify\nmmcblk0p09+/vendor+ext4+ro+verify
the final fstab string will be:
/sys/devices/1010000.msdc0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p10 /odm ext4 ro verify
/sys/devices/1010000.msdc0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p09 /vendor ext4 ro verify
The android.early.prefix is optional. When it is missing, the final fstab
string will be directly converted from android.early.fstab.
This patch also makes sure that the early mounted partitions are dm-verity
enabled so that they are trust worthy to store system files.
BUG=27805372
Change-Id: I3cf32482a5ec65445ba3aedab2164c7ba8f12694
The sysfs nodes can change from devices to devices for
a particular class of peripheral. Some of them even change
after suspend/resume, e.g. rfkill for USB bluetooth adapters.
This patch adds to the way how ueventd rules with wildcard are
handled. In addition to matching the prefix with a trailing
wildcard, now rules can have wildcard anywhere in the rule.
The wildcard matching is implemented using fnmatch(), where
its matching is simliar to shell pathname expansion. It suits
this particular usage model well. To avoid abuse, the number of
slashes has to match between path name and the rule.
For example, instead of creating a rule to match:
/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/bluetooth/hci0/rfkill*
, this would suffice:
/sys/devices/pci0000:00/0000:00:1d.0/*/*/*/*/bluetooth/hci0/rfkill*
The prefix matching behavior is retained, such that those
rules do not have to pay for processing penalty with fnmatch().
Change-Id: I3ae6a39c838f6d12801cb71958e481b016f731f5
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This should be much nicer than peppering init.rc with chown/chmod
directives.
Also, remove some dead code and obsolete comments.
Change-Id: I10895f10a9cf2f1226c8d12976cd3db3743da9ec
