We're moving past a world where static executables are needed,
including watchdogd, so treat this like any other executable and place
it in /system/bin.
Bug: 73660730
Test: watchdogd still runs
Change-Id: I1f7508fd55dce6e9ee72a6ab7a085011a76c0053
Some devices have modules.alias and modules.dep for modprobe and other
purposes but do not want to opt into ueventd auto loading their
modules. Therefore we add a flag that can be added to ueventd
configuration files to opt into this behavior.
Bug: 111916071
Bug: 112048758
Test: check that modules are loaded with this opt-in
Test: check that modules are not loaded without this opt-in
Change-Id: Ifb281b273059b4671eea1ca5bc726c9e79f3adfb
During uevent processing, some "by-name" symlinks will be created.
/dev/block/<type>/<device>/by-name/<partition>
<type> can be: platform, pci or vbd.
<device> might be: soc.0/f9824900.sdhci, soc.0/f9824900.sdhci, etc.
<partition> might be: system, vendor, system_a, system_b, etc.
e.g., on a non-A/B device:
/dev/block/platform/soc.0/f9824900.sdhci/by-name/system
/dev/block/platform/soc.0/f9824900.sdhci/by-name/vendor
On a A/B device:
/dev/block/platform/soc/1da4000.ufshc/by-name/system_a
/dev/block/platform/soc/1da4000.ufshc/by-name/system_b
/dev/block/platform/soc/1da4000.ufshc/by-name/vendor_a
/dev/block/platform/soc/1da4000.ufshc/by-name/vendor_b
However, those symlinks are "device-specific".
This change adds the "generic" symlinks in ueventd, in addition to
the existing symlinks, when the possible "boot devices" are specified
in device tree. e.g.,
&firmware_android {
compatible = "android,firmware";
boot_devices ="soc/1da4000.ufshc,soc.0/f9824900.sdhci";
}
The following symlinks will then be created on the aforementioned non-A/B
and A/B devices, respectively.
/dev/block/by-name/system
/dev/block/by-name/vendor
/dev/block/by-name/system_a
/dev/block/by-name/system_b
/dev/block/by-name/vendor_a
/dev/block/by-name/vendor_b
Note that both <type> and <device> are skipped in the newly create symlinks.
It assumes there is no more than one devices with the same <partition>,
which is the assumption of current first stage mount flow.
Finally, when 'boot_devices' in DT is absent, it fallbacks to extract
'boot_devices' from fstab settings. e.g., using 'soc/1da4000.ufshc',
'soc.0/f9824900.sdhci' for a fstab with the following content:
/dev/block/platform/soc/1da4000.ufshc/by-name/system
/dev/block/platform/soc.0/f9824900.sdhci/by-name/vendor
Bug: 78613232
Test: adb shell ls /dev/block/by-name
Change-Id: Iec920b5a72409b6a2bdbeeb290f0a3acd2046b5d
The uevent.partition_num easily collides between partitions, for
example:
Both /dev/block/sda3 and /dev/block/sdd3 will generate the same symlink:
/dev/block/platform/soc/1da4000.ufshc/by-num/p3
This change remove those by-num symlinks as there seems no effective
user of it.
Bug: 78613232
Test: m init_tests && \
adb push $OUT/data/nativetest64/init_tests/init_tests /data/. && \
adb shell /data/init_tests
Change-Id: I8dfa8dc1a2f9fc9296aa30f33e905bf158b501de
We should have done this from the beginning. Thanks to Windows, we're not
going to be able to switch libbase over to std::string_view any time soon.
Bug: N/A
Test: ran tests
Change-Id: Iff2f56986e39de53f3ac484415378af17dacf26b
1) Check subsystems list before doing usb subsystem logic. This allows
developers to handle usb* subsystems in ueventd.rc files.
2) Fix a bug where each subsystem_ instance is not reinitialized, but
rather only the name_ member was set.
Test: boot bullhead
Test: check that multiple uevent_devname subsystems work when
specified in ueventd.rc
Change-Id: Ifcac04763afcaf72a3b14ef5f3a6cb89981b51a1
This change splits out the selinux initialization and supporting
functionality into selinux.cpp and splits the security related
initialization of the rng, etc to security.cpp. It also provides
additional documentation for SEPolicy loading as this has been
requested by some teams.
It additionally cleans up sehandle and sehandle_prop. The former is
static within selinux.cpp and new wrapper functions are created around
selabel_lookup*() to better serve the users. The latter is moved to
property_service.cpp as it is isolated to that file for its usage.
Test: boot bullhead
Merged-In: Idc95d493cebc681fbe686b5160502f36af149f60
Change-Id: Idc95d493cebc681fbe686b5160502f36af149f60
While refactoring ueventd, I was looking for code the character device
symlinks (/dev/usb/*) that ueventd creates, such that I could test it
on a real device. I found none in our tree, and history showing Xoom,
which was last supported years ago, was the last user. If this code
is in fact obsolete, let's remove it.
Test: boot bullhead
Test: init unit tests
Change-Id: I601f7165eb06d36b31b6dcf69ee9e0a449d81a96
In order to create symlinks for USB and block devices, the path for
their parent platform device must be known.
Previously, ueventd would save each platform device that it encounters
to a list and query this list when creating the symlinks. That,
however, is racy because the uevent socket does not differentiate
uevents from RegenerateUevents() and uevents sent by the kernel when
probing a device first the first time. The below scenario is the
faulty case:
1) Kernel probes parent platform device for a block device
2) ueventd calls RegenerateUevents() and starts processing uevents
3) Kernel probes block device and sends its uevents
4) ueventd picks up the block device uevent during its uevent processing,
without yet regenerating the platform device uevent, causing improper
symlinks to be created.
This change stops storing the platform devices in a list, and instead
traverses up the directory structure for each USB or block device
until it reaches a platform device, defined as one whose subsystem is
the platform bus. This fixes the race and simplifies the ueventd
code.
Bug: 62436493
Bug: 62681642
Test: Boot bullhead
Test: Boot sailfish
Test: Init unit tests
Test: Boot hikey + hotplug/unplug sdcard
Change-Id: I21636355d8e434f30e0cba568598a6cf139e67f9
fork() subprocesses to handle uevents in parallel.
This reduces coldboot time on bullhead from ~446ms to ~230ms.
This reduces coldboot time on sailfish from ~690ms to ~360ms.
This reduces coldboot time on ryu from ~187ms to ~122ms.
Bug: 33785894
Test: boot bullhead x40, observe no major differences in /dev and /sys
Test: boot sailfish x40, observe no major differences in /dev and /sys
Test: boot ryu x40, observe no major differences in /dev and /sys
Test: boottime tests on bullhead and sailfish
Test: init unit tests
Change-Id: Ie2f63e000b8af78d187477d31fe109f20304d749
devices.cpp handles too many things for creating one class. This
change breaks it up into various files and classes.
* Parsing is moved to ueventd_parser.cpp
* Reading from the uevent socket and Cold booting is moved to a
UeventListener class, in uevent_listener.cpp
* Firmware handling is moved to firmware_handler.cpp
* The remaining contents form a DeviceHandler class within devices.cpp
Bug: 33785894
Test: boot bullhead x40, observe no major differences in /dev and /sys
Test: boot sailfish x40, observe no major differences in /dev and /sys
Test: init unit tests
Change-Id: I846a2e5995fbb344c7a8e349065c18a934fa6aba
restorecon() has become nothing more than a small wrapper around
selinux_android_restore(). This itself isn't super problematic, but
it is an obstacle for compiling util.cpp on the host as that function
is not available on the host.
Bug: 36970783
Test: Boot bullhead
Merged-In: I7e209ece6898f9a0d5eb9e5d5d8155c2f1ba9faf
Change-Id: I7e209ece6898f9a0d5eb9e5d5d8155c2f1ba9faf
Init exposes a global 'sehandle' that ueventd references as part of
devices.cpp and util.cpp. This is particularly dangerous in
device_init() in which both uevent and init write to this global.
This change creates a separate local copy for devices.cpp and puts
restrictions on where init.h can be included to make sure the global
used by init is not reference by non-init code. Future changes to
init should remove this global.
Test: Boot bullhead
Change-Id: Ifefa9e1932e9d647d06cca2618f5c8e5a7a85460
Reloading sepolicy has been removed from the system, so this support
code can also now be removed.
Bug: 26544104
Test: Boot bullhead
Change-Id: If9dbc9d540d9a69340c1dd6a483c1f8fe5feb287
Previously init_parser.cpp was made generic and capable of parsing any
number of differently named 'sections' or prefixed lines. We now use
these capabilities to do the parsing for ueventd.
Bug: 36250207
Bug: 33785894
Test: boot bullhead and ensure the right /dev nodes exist
with the right permissions set
Test: verify no boot time difference
Change-Id: I698ca962d414f8135af32f6c9cd778841b2b8b53
Create classes for dev and sys permissions and store these permissions
in std::vector instead of the C list.
Test: boot bullhead
Test: init unit tests
Change-Id: I874039a3db29b4c70149506da8e407123ab7eca2
Also simplify this code a bit.
There's only one consumer that removes the /devices/platform prefix,
so have them handle it instead of storing two copies of the string.
Remove an unneeded search for '/' in get_character_device_symlinks()
as a / will always be the next character after a parent path, by
nature of FindPlatformDevice().
Test: boot bullhead
Test: init unit tests
Change-Id: I9d0482d137b1342ae7509ae993ff99198be814f0
This was marked deprecated in 2014 and removed in 2015, let's remove
the uevent rule now too.
Test: see that logging still works on bullhead
Change-Id: Idaf3f49a1afe7046eba6c976628b9f1c8b3ec094
Additionally replace the associated C string parsing with C++ and write
unit tests.
Bug: 33785894
Bug: 36250207
Test: Boot bullhead + unit tests
Change-Id: Iee1f72d248bca3bd2e1227045628935b3dd6195a
Remove includes of "log.h" that really want <android-base/logging.h>
Fix header include order
Remove headers included in .cpp files that their associated .h already includes
Remove some unused headers
Test: boot bullhead
Change-Id: I2b415adfe86a5c8bbe4fb1ebc53c7b0ee2253824
This patch makes ueventd create by-name symlinks for virtual block
devices when Android is running as a Xen guest OS.
The symlinks will be created under /dev/block/vbd/. For example:
/dev/block/vbd/768/by-name/
Change-Id: Id45da560d13f641d7c8419511c154de9ae8a4ec9
Test: manual
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
The clang static analyzer is complaining that we are not checking the
setegid() return value, so let's add these checks. We should never
fail to return to AID_ROOT, so fail hard in this case.
Bug: 26962034
Test: Boot bullhead
Test: export WITH_STATIC_ANALYZER=1 and run 'mm' in the project directory
Change-Id: I62e95b045c5734305c71502871b6cf17f152edbc
device_init opens the uevent socket and sehandle when called.
For early_mount however, depending on the fs_mgr flags we may call this
in order to run coldboot for device mapper, dm-verity devices etc.
So the change makes sure we don't try to re-open the uevent socket,
file context handle and selinux status on successive calls to
device_init from within the same process.
b/27805372
Test: Boot saifish successfully
Change-Id: Ifa0e665403211684183efb9be66e4e8d0d86a206
Signed-off-by: Sandeep Patil <sspatil@google.com>
This is done by parsing 'androidboot.fstab=<fstab>' kernel cmdline
option to get the fstab file that *only* specifies partitions to be
mounted early (i.e. in init's first stage).
Note that, the same fstab file may not be used as an argument to
mount_all later in the boot as that will cause fs_mgr to fail with
EBUSY.
TODO:
- Possibly add a new mount_mode so the same fstab can be used for
early_mount, 'mount_all --early/--late' etc.
- Add support for dm-verity enabled partitions to mount early.
- Add support for getting fstab arguments through DT instead of kernel
cmdline.
Bug: 27805372
Test:
Boot angler by passing a seperate fstab file using the kernel
cmdline option to mount vendor partition early, remove the vendor
partition entry from the main fstab file for the test.
Boot sailfish by passing a seperate fstab entry via device tree
to mount vendor partition early. Remove vendor partition entry from
the main fstab file for the test
Change-Id: I18785b893c54c8cee960ab44d5e8f83e5d624aa8
Signed-off-by: Sandeep Patil <sspatil@google.com>
keeps parts of the code that are still needed for the fs_mgr
+ dt based implementation
b/27805372
Test: boot angler, sailfish without regressions
Change-Id: I1b08f8b7b4f2e67118d328443a5011c0f5ead919
Signed-off-by: Sandeep Patil <sspatil@google.com>
We don't want to spend time creating devices that are unncessesary
during early (init first-stage) mount. So, refactor the devices code
tha allows us to call into coldboot and has the
- ability to only create devices that are specified by the caller
- ability to stop coldboot cycle when all devices that the caller is
interested in
- ability to run coldboot for a specific syspath
- ability to run ueventd code unmodified
Test: Tested boot on angler, sailfish
Change-Id: Id8f3492380696760414eadc20d624d300c904f8e
Signed-off-by: Sandeep Patil <sspatil@google.com>
This is to setup a way for us to run coldboot during init first stage
and also at ueventd startup. We do not have all of the file context
during the first stage, so the "early" coldboot needs to proceed without
labelling the device nodes. However, the follow up in ueventd must label
these nodes. This change allows us to do both.
b/27805372
Test: Boot angler successfully and compare do before/after comparison of
the output of 'ls -AclpqRZ /dev' to ensure there are no differences.
Change-Id: I5e88bd7da8a1d2cc41e3abba30dda463ecbde32e
Signed-off-by: Sandeep Patil <sspatil@google.com>
Use to solve the problem of tracefs conditionally being mounted
under debugfs and needing restorecon'd without boot performance
penalty.
Also move skip-ce to a flag for consistency.
Test: Check that trace_mount has correct attributes after boot
Bug: 32849675
Change-Id: Ib6731f502b6afc393ea5ada96fa95b339f14da49
Right now these two partitions are mounted in the fs stage of the init
process. As a result, many vendor/ODM files needed earlier in the boot
process (e.g., init.<hardware>.rc, fstab.<hardware>.rc,
uevent.<hardware>.rc, SELinux policy files etc) can only live on the root
partition.
To prevent vendors/ODMs from polluting the root partition, this patch makes
it possible to mount the vendor and ODM partitions in the first stage of the
init process. The fstab info of both partitions to be mounted early is
composed from new kernel cmdline arguments android.early.prefix and
android.early.fstab.
For example, with:
android.early.prefix=/sys/devices/1010000.msdc0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/
android.early.fstab=mmcblk0p10+/odm+ext4+ro+verify\nmmcblk0p09+/vendor+ext4+ro+verify
the final fstab string will be:
/sys/devices/1010000.msdc0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p10 /odm ext4 ro verify
/sys/devices/1010000.msdc0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p09 /vendor ext4 ro verify
The android.early.prefix is optional. When it is missing, the final fstab
string will be directly converted from android.early.fstab.
This patch also makes sure that the early mounted partitions are dm-verity
enabled so that they are trust worthy to store system files.
BUG=27805372
Change-Id: I3cf32482a5ec65445ba3aedab2164c7ba8f12694
