Currently if a process sets the sys.powerctl property, init adds this
property change into the event queue, just like any other property.
The actual logic to shutdown the device is not executed until init
gets to the action associated with the property change.
This is bad for multiple reasons, but explicitly causes deadlock in
the follow scenario:
A service is started with `exec` or `exec_start`
The same service sets sys.powerctl indicating to the system to
shutdown
The same service then waits infinitely
In this case, init doesn't process any further commands until the exec
service completes, including the command to reboot the device.
This change causes init to immediately handle sys.powerctl and reboot
the device regardless of the state of the event queue, wait for exec,
or wait for property conditions.
Bug: 37209359
Bug: 37415192
Test: Init reboots normally
Test: Update verifier can reboot the system
Change-Id: Iff2295aed970840f47e56c4bacc93001b791fa35
fs_mgr_update_verity_state() is invoked by 'verity_update_state' in
init.rc. It will then set property "partition.system.verified" and
"partition.vendor.verified" to verify_mode. We should support this for
AVB as well.
Also change the order of static libs in init to fix the build error
after this change:
system/extras/ext4_utils/ext4_crypt.cpp:69: error: undefined reference to 'property_get'
Bug: 35416769
Test: Mount /system and /vendor with vboot 2.0 (AVB), check the following properties exist.
- [partition.system.verified]: [2]
- [partition.vendor.verified]: [2]
Test: Mount /system and /vendor with vboot 1.0, check the following properties exist.
- [partition.system.verified]: [0]
- [partition.vendor.verified]: [0]
Change-Id: I4328d66a8cb93f26e7960e620a0b2292d5f15900
Remove includes of "log.h" that really want <android-base/logging.h>
Fix header include order
Remove headers included in .cpp files that their associated .h already includes
Remove some unused headers
Test: boot bullhead
Change-Id: I2b415adfe86a5c8bbe4fb1ebc53c7b0ee2253824
this will make the implementation more cleaner,
and has error message output when failed on some operations
also add the O_TRUNC flag explicitly for the open function
called in write_file.
And add more test on read_file and write_file functions
Bug: 36726045
Test: manual with hikey
Test: boot and init tests on bullhead
Test: cast with fugu, per b/36726045
Merged-In: If3c30a2fff58cfece2fcd27e69c30382146e6808
Change-Id: If3c30a2fff58cfece2fcd27e69c30382146e6808
Signed-off-by: Yongqin Liu <yongqin.liu@linaro.org>
The content parameter of write_file() previously took a char* that was
then converted to a std::string in WriteStringToFd(). One unfortunate
effect of this, is that it is impossible to write data that contains
'\0' within it, as the new string will only contain characters up
until the '\0'.
This changes write_file() to take an std::string, such that
std::string::size() is used to determine the length of the string,
allowing it to contain null characters.
Also change the path parameter of read_file() and write_file() for
consistency.
Lastly, add a test for handling strings with '\0' in them.
Bug: 36726045
Test: Boot bullhead, run unit tests
Change-Id: Idad60e4228ee2de741ab3ab6a4917065b5e63cd8
init used to block on installkey such that it was unable to
process property events. This lead to a deadlock by which
the Keymaster HAL would wait indefinitely for the
hwservicemanager.ready=true.
This fixes the issue by implementing the builtin in terms of
do_exec, which allows init to stay responsive to properties
while waiting for the child to terminate.
Bug: 36278706
Test: Add a 3s delay into hwservicemanager before it sets the property
hwservicemanager.ready and the device still boots.
Change-Id: Iaefd31156ca01f3a44b4f85a8bf78beee8dfe224
Exec services may also want to set other service flags such as
priority. Instead of expanding the exec syntax to handle this, create
a new command, exec_start, that will treat an existing service
definition as an exec service. The new exec_start command will start
the service then halt init from executing further commands until the
service has exited.
This change additionally encapsulates the waiting_for_exec logic into
ServiceManager and removes the ambiguous 'bool' return value from
Reap() which previously indicated if a Reaped service was an exec
service or not.
Bug: 36511808
Bug: 36102163
Test: Bullhead boots, services run with exec_start as they do exec.
Change-Id: I44f775cf1c1dd81d5c715f44fdc150c651a2c80a
this will make the implementation more cleaner,
and has error message output when failed on some operations
also add the O_TRUNC flag explicitly for the open function
called in write_file.
And add more test on read_file and write_file functions
Test: manual with hikey
Change-Id: Ifc1086a20e85db6980b497b1150a8a7952e672d6
Signed-off-by: Yongqin Liu <yongqin.liu@linaro.org>
- Emergency shutdown just marks the fs as clean while leaving fs
in the middle of any state. Do not use it anymore.
- Changed android_reboot to set sys.powerctl property so that
all shutdown can be done by init.
- Normal reboot sequence changed to
1. Terminate processes (give time to clean up). And wait for
completion based on ro.build.shutdown_timeout.
Default value (when not set) is changed to 3 secs. If it is 0, do not
terminate processes.
2. Kill all remaining services except critical services for shutdown.
3. Shutdown vold using "vdc volume shutdown"
4. umount all emulated partitions. If it fails, just detach.
Wait in step 5 can handle it.
5. Try umounting R/W block devices for up to max timeout.
If it fails, try DETACH.
If umount fails to complete before reboot, it can be detected when
system reboots.
6. Reboot
- Log shutdown time and umount stat to log so that it can be collected after reboot
- To umount emulated partitions, all pending writes inside kernel should
be completed.
- To umount /data partition, all emulated partitions on top of /data should
be umounted and all pending writes should be completed.
- umount retry will only wait up to timeout. If there are too many pending
writes, reboot will discard them and e2fsck after reboot will fix any file system
issues.
bug: 36004738
bug: 32246772
Test: many reboots combining reboot from UI and adb reboot. Check last_kmsg and
fs_stat after reboot.
Change-Id: I6e74d6c68a21e76e08cc0438573d1586fd9aaee2
Fix two formatting issues in Action::DumpState(),
Old:
on ro.crypto.state=encrypted ro.crypto.type=file zygote-start
New:
on ro.crypto.state=encrypted && ro.crypto.type=file && zygote-start
Old:
on boot
%sifup lo
%shostname localhost
%sdomainname localdomain
%swrite /proc/sys/vm/overcommit_memory 1
New:
on boot
ifup lo
hostname localhost
domainname localdomain
write /proc/sys/vm/overcommit_memory 1
Also, now that we're importing many small rc files, it no longer makes
sense to call Parser::DumpState() after each import. Therefore, move
the conditional to call Parser::DumpState() to after /init.rc and its
imports are parsed and after the late imports are parsed.
Test: Boot bullhead with DumpState() enabled and check the output
Change-Id: I0b81305b8938aa1a7133d7dd2055f34f47609cf9
- three properties: .early, .default, .late
- for tracking critical early boot times
bug: 35949600
Test: manual, getprop after boot
Change-Id: I851891518428e6e21cb43a2a6f982ab7db281d4c
Treblization requires to locate partner-specific modules in its own
partition. So their own init.rc file could be located in /odm or
/vendor.
This CL is to support those locations for the init.rc.
Additionally thic CL modified import parser to support importing a
relative path.
Test: building succeeded and tested on sailfish with enabling early
mount.
Bug: 35269867
Change-Id: I1bce924a32c8a2b53fb5d981d35d758cf9ddd9a6
Add wait time log for exec service execution time
Fix memory leak when exec service failed to start
Test: on marlin
Bug: 34518530
Change-Id: I01736bd9b1429414f3dc91dd5d02d88a681f0985
There are many use cases from vendors to exec service in background and then
use a shell scriprt to wait for the command done.
This CL is to add a wait_for_prop command to suppor those use cases.
Bug: 34746108
Test: on marlin
Change-Id: Ia81290b0928f9d375710d2daa546714f0cd65b72
The mismatch of return values makes reasoning about the correctness of
CLs like https://android-review.googlesource.com/317923 quite hard.
Bug: 33941660
Test: Init builds, HiKey boots.
Change-Id: Ia4b8a9af420682997b154a594892740181980921
Most notably, there's no longer any need to guess an end time.
Bug: http://b/23478578
Bug: http://b/33450491
Test: rebooted with bootcharting on/off
Change-Id: Icb7d6859581da5526d77dfc5aa4d57c9bfbfd7e2
ExecuteCommand may change command_ vector which leads undefined behavior
This bug is found when adding logs in ExecuteCommand printing our Command class fields
Bug: 32838381
Test: on emulator
Change-Id: I96468bd2192ca80013871a3a6ac4132149363fff
Use to solve the problem of tracefs conditionally being mounted
under debugfs and needing restorecon'd without boot performance
penalty.
Also move skip-ce to a flag for consistency.
Test: Check that trace_mount has correct attributes after boot
Bug: 32849675
Change-Id: Ib6731f502b6afc393ea5ada96fa95b339f14da49
On FBE devices, the filenames inside credential-encrypted directories
are mangled until the key is installed. This means the initial
restorecon at boot needs to skip these directories until the keys
are installed.
This CL changes the implementation of the "restorecon_recursive"
built-in command to use the new SKIPCE flag to avoid labeling files
in CE directories. vold will request a restorecon when the keys
are actually installed.
(cherrypicked from commit 1635afe83d)
Bug: 30126557
Test: Cherry-picked from master
Change-Id: I320584574a4d712c493b5bbd8a79b56c0c04aa58
With this change, init sets a property "init.start" to show the
CLOCK_BOOTTIME time at which init itself started, and for each service
an "init.svc.<name>.start" property to show the CLOCK_BOOTTIME time at
which that service was most recently started.
These times can be used by tools like bootstat to track boot time.
As part of this change, move init over to std::chrono. Also, rather than
make the command-line argument handling more complex, I've switched to
using an environment variable for communication between first- and
second-stage init, and added another environment variable to pass the
start time of the first stage through to the second stage.
Bug: http://b/32780225
Test: manual
Change-Id: Ia65a623e1866ea688b9a5433d6507926ce301dfe
