We loop over /proc to iterate through pids in a lot of code, so let's
consolidate this into a single function in libbase.
Test: new unit test
Change-Id: I908fab90b603546d0e3e8b8acdc8dadfc3552d62
Bug: 135683564
Test: Included expected.h from two different files. Builds succesfully
with the fix. Does not build without the fix.
Change-Id: If1962a3b70f7580fa652a043aaf29bf592d1926c
We're already including fmtlib statically in libbase, so let's also
expose its functionality directly.
Also create a small benchmark of the most common operations for
format() and StringPrintf(): int, float, and string arguments. Note
that fmt::format is faster than StringPrintf() in all of these cases.
Test: build, run benchmark
Change-Id: I1e18f13673dd89ea936ea5c51418fad723495b08
String formatting for error message can be done by using Errorf and
ErrnoErrorf. e.g. `return Errorf("{} failures", num_failure);`
The string format follows that of fmtlib, not printf.
Bug: 132145659
Test: libbase_test
Change-Id: I65f45d5f12ed23e2c14d6eb442278f467cc42e83
It is typical to pass error to callers like following;
if (!result) {
return Error() << result.error();
}
To transfer errno(or ResultError#code()), Error defines a specialization
operator<<(const ResultError&).
This change fixes so that ResultError is properly handled
Bug: 132145659
Test: atest libbase_test
Change-Id: Ib35457da2d4b923d8e652c54ac510a75546cf918
I was looking for 'MmapFile' earlier and couldn't find it. After
being pointed to it, we thought that adding this synonym would help
others trying to find this file.
Test: n/a
Change-Id: I7fbfd8e090f21183a5de3603a76f884562b99c4a
The Result, Error, ErrnoError are quite generic. Moving them from init
to libbase so that they can be used from other places.
Bug: 132145659
Test: libbase_test
Change-Id: Id774a587f74380fadd7a0fc88c0aa892c3d9a489
As of Android-P, __system_property_set() is synchronous and only will
return '0' if the property was successfully set.
Test: n/a
Change-Id: Icbc0a6d8be1ae683565f378c534ea8e5c5f25357
This is a follow-up change of 7d89fb164b.
- Some of the missing conditions for SFNAIE were added
- Fixed indentation
- The assignment operator became "= default"
Bug: 132145659
Test: libbase_test
Change-Id: Ib5232a6e5e1d3df67e185d6e8c03374105c1ce94
Memory mapping the central directory of specific APKs caused memory
mappings to build up over time because they were never unmapped
correctly. This is because MappedFile is not calling munmap with the
size of the data after aligning the mmap offset to a page boundary.
Bug: 133463863
Test: install APKs and verify that the entire mapped CD is unmaped
Test: ran aapt2 as daemon and confirmed that mapped CD is unmapped
Change-Id: I26bda27c83615d1a166d92e43a2327909c453b89
android::base::expected is an Android implementation of the
std::expected proposal.
http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2018/p0323r7.html
For usage, refer to the expected.h header file and
expected_test.cpp
Bug: 132145659
Test: libbase_test
Change-Id: I65d3a1ecf8654d9858989755dfd0065c81f7b209
The original commit broke aosp-master-with-phones, because of
vendor libraries the depended on the int versions of libbase functions.
This patch reverts the revert, and also adds ABI-compatibility shims for
the replaced functions.
This reverts commit 2c58e1924a.
Bug: http://b/131312539
Test: treehugger
Test: forrest run of aosp-master-with-phones
Change-Id: I75cc84ec8d963e20862f7662e8e2f409471f41cc
Enable native bridge support for libbase, liblog,
libziparchive and libpropertyinfoparser.
This makes it possible to use them in binaries for translated
architectures.
Bug: http://b/77159578
Test: make
Change-Id: If67ce92288b17a052ea1e79a268e284f7d941439
adb was already using ConsumePrefix, and now we have another would-be
user in cutils. (There appears to be one place in adb that should use
ConsumeSuffix, so I'm assuming we'll want that sooner or later.)
I've kept these inline because adb and google3's versions both were, and
I'm easily led.
Test: treehugger
Change-Id: I29d99032f6f6ccbfaefece59725db8afb02a4c87
This reverts commit 93d63c010a.
Reason for revert: b/131312539 - All aosp-master-with-phones phones failing boot / health check.
Change-Id: Id4239f93484b7d6b8d9bcd355a59cbd40d9766e2
unique_fd's implicit conversion to int has led to tons of problems (see
all of the overloads for close, fdopen, fdopendir, etc.). Add a switch
that can turn it off, and reduce the ridiculous amount of work to fix up
callers by introducing a borrowed_fd type that can be constructed from
either int or unique_fd.
Test: treehugger
Change-Id: If77cf5cbcaddacdaec5919a15b3520fb68f51a62
This catches a common mistake where client code checks for errors using
the common idiom that works for std::iostream and other file-like
classes:
unique_fd fd = open(...);
if (!fd) {
}
Test: atest libbase_test
Test: m droid
Change-Id: I9629a7795537ecb3b57be9c741c06f80967e4cc2
* changes:
libbase: realpath is wrapped with TEMP_FAILURE_RETRY
liblp: Replace open with GetControlFileOrOpen
init: expand prop in 'file'
libcutils: android_get_control_file uses realpath.
Although man page for realpath doesn't say so, the bionic
implementation of realpath may exit with error code
EINTR. In such cases, retry.
Test: boots (sanity)
Change-Id: Ic5feb7152374a81bd2f475ad74c4bc8c3afb3a20
Bug: http://b/119818070 "app crashes when reading asset of zero length"
Add support for zero-length mappings for the Windows code path as well.
Test: ran libbase_test on Windows under wine.
Change-Id: Iccb65fa800c636444100c9369f41e36d24a53a99
Silence narrowing warnings by manually casting to a smaller type,
convert static_asserts to CHECKs, and switch from using MSG_CMSG_CLOEXEC
to manually setting FD_CLOEXEC.
Test: mma
Change-Id: I8aa02804179d754de860279fe34773800b937ab6
Almost all of the uses of cmsg(3) in our source tree are wrong in at
least one of the following ways:
- not aligning the cmsg buffer
- leaking fds if more fds are received than expected
- blindly dereferencing CMSG_DATA without checking the header
- using CMSG_SPACE instead of CMSG_LEN for .cmsg_len
- using CMSG_LEN instead of CMSG_SPACE for .msg_controllen
- using a length specified in number of fds instead of bytes
Implement wrapper functions that implement this dumpster fire of an
API correctly.
Bug: http://b/122047630
Test: libbase_test32
Change-Id: I6ac34d67bbbf1bfa9727ab598248fc178ea19df9
This is a useful helper for anyone that's using thread safety
annotations alongside std::condition_variable, extract it from adb and
move it to libbase.
Test: mma
Change-Id: Ic51e2f2a0e6a16628034b29d8ff32bf2155afccd
unique_fd's destructor potentially mangling errno makes it difficult to
use correctly in code that sets errno (or, in reality, it makes it so
that errno values get randomly stomped upon if close actually sets
errno, because no one accounts for this case).
Preserve errno ourselves to avoid this.
Test: treehugger
Change-Id: Ib06e6f65866d86fff4032b2311021eaf9226a1af
sehr points out that we already have two bugs caused by not doing this:
file.cpp has a call to pread with an off64_t that gets truncated, and
mapped_file.cpp does similar with mmap.
Bug: N/A
Test: ran tests
Change-Id: Ia098a836457e5adf109541235ad71c0ad7219da8
Currently bionic only stores the first invocation of
android_set_abort_message, libbase splits the logging invocations
into discrete lines, and liblog automatically calls bionic when
fatal severity is used. This leads to only the first line of
LOG(FATAL) being stored for tombstoned.
Eagerly set the abort message directly before logging when the
severity is FATAL. This ensures the complete message will be
available.
Bug: 120506942
Test: m
Test: manual
Change-Id: I104d6960a2b1f66f21f5ada383fb4ab0f35e96a9
Recursively delete all contents in a temporary directory in the
destructor. If the caller wants the contents preserved, then
call DoNotRemove().
Test: compile
Bug: 119313545
Change-Id: I3601c06334920055a60dd3074b249824f4d6f510
Recursively delete all contents in a temporary directory in the
destructor.
Test: compile
Bug: 119313545
Change-Id: I9570a8591f4e51f8f4f1157e75ccc1b781f8a19d
Allow a wider legitimate audience to use TemporaryFile and
TemporaryDir by moving them from android-base/test_utils.h to
android-base/file.h.
Test: compile
Bug: 119313545
Change-Id: Ie558c5873ce5b3937914918b6bfb427e5b61d0da
Using fdopendir with unique_fd correctly is more annoying than it
should be, because fdopendir doesn't close the file descriptor
received upon failure.
Add an android::base::Fdopendir that does that handles the failure
case.
Bug: 118818285
Test: treehugger
Change-Id: I5dbbe0eb82242bc7716f84735ffc7644febcfd65
Given that I can't actually go back in time and just make bionic's
`off_t` be 64-bit.
Bug: N/A
Test: builds
Change-Id: Ic93336b07bffc0977bd0e9caad6a22ce29ca06ed
This allows us to remove libziparchive's dependency on libutils.
Bug: http://b/79112958
Test: ran libbase and libziparchive tests, ran fastboot manually
Change-Id: I95c651976dad222863e5b8c37d4514b778f5dce7
Let's use LOG(FATAL)/PLOG(FATAL) for actual fatal stuff.
Add a Windows error(3) and move folks who didn't really mean "abort"
fatal over to it. Also get rid of syntax_error which wasn't adding a
lot of value, and most of the places it was adding "usage: " didn't seem
entirely appropriate anyway.
In particular, we seemed to have confused fastdeploy.cpp into aborting
in most user error cases, and none of the reviewers noticed. Clearly
we'd all lost track of far too many options.
(I've also cleaned up a few random instances of fprintf(3) + exit(2).)
Bug: N/A
Test: manual
Change-Id: I3e8440848a24e30d928de9eded505916bc324786
Add FALLTHROUGH_INTENDED for clang compiler.
Bug: 112564944
Test: build with global -Wimplicit-fallthrough.
Change-Id: I40f8bbf94e207c9dd90921e9b762ba51abab5777
Move the fd() function to be private since it should not have been
exposed in the first place.
Fix the way logging_test uses CapturedXXX.
Adding this because the new isolated testing doesn't print errors to
stderr so the ASSERT_ EXPECT_ messages can get swallowed. Also, it's easier
to reuse a CapturedXXX object in a test with these functions.
Test: New unit tests pass.
Change-Id: I38b113fc184146ce434802f80a9b7997fa83e78a
Using fdopen with unique_fd correctly is more annoying than it should
be, because fdopen doesn't close the file descriptor received upon
failure, which means you have to something like the following:
unique_fd ufd = ...;
int fd = ufd.release();
FILE* file = fdopen(fd, "...");
if (!file) {
close(fd);
return;
}
Add an android::base::Fdopen that does that dance for you.
Bug: http://b/113880863
Test: treehugger
Change-Id: I6325acf1ff06484005c1053fe09672c5eeeecaa1
This test means to check both that ParseInt() and ParseUint() do not
change the result on failure, however it erroneously tested ParseInt()
twice.
Test: unit tests
Change-Id: If534e2525827e19aba6cae0eef45668d57623efb
1) ParseInt and ParseUint accept strings that have spaces followed by
a valid number, however the base check for determining hex numbers
does not take this into account currently, but now does this this
change.
2) ParseUint rejects negative numbers except in the case that the
template argument is unsigned long long. That is a mistake; it
should reject negative numbers in all cases and this change does
that by rejecting any string with a - prefix.
Bug: 112668205
Test: new (and old) unit tests
Change-Id: I0179b42e50adc1b169cf0e6d830283b71210a029
I originally accidentally created this file with the execute bit on.
Test: mma
Change-Id: I8075ffdbb114475434ad48912a9dd24f19a9025b
Signed-off-by: Spencer Low <CompareAndSwap@gmail.com>
EXPECT_DEATH forks behind the scenes, which turns off fdsan, leading to
these tests failing. Instead of duplicating the special
EXPECT_FDSAN_DEATH macro, just move these tests into the bionic fdsan
tests.
Test: none
Change-Id: Ia7b65d4560601d5a78d143aced887a6773b401c0
This change also updates documentation for Parse(Ui|I)nt functions
which recently had a corresponding change applied.
Bug: 110758329
Test: libbase_test
Change-Id: I4842c0500a6e49498eeb8a63d1117c06727fffdf
Use __attribute__((weak)) to check for fdsan availability at runtime,
to support being used when built with the NDK while targeting older
platform versions.
This reverts commit af798acaea49b8d9150b94eb9f5f11450a6b8893.
Bug: http://b/110100358
Test: m libjnitest
Change-Id: Ie59d041d69cc3d4b6c59412d706f702dd1d2dab2
Removes segfault if T* out != nullptr and just
returns validation result.
Bug: 110758329
Test: libbase_test
Change-Id: I0f304533a7076bba977fbd1a715b9cc0d9e58e75
This reverts commit fcf2c01b55.
Commit broke full-eng, because libbase is being compiled against the NDK.
Test: treehugger
Change-Id: I8447b6a7fc33e6aa34cec0f037727322fa824446
In the RemoveFileIfExists it always return true even if error appeared
when using stat function.
It should distinguish different error. Such as ENOENT and ENOTDIR
we exactly know the file does not exist. But EACCES(current user has not
all search permission in the file path) and other errors appeared
we can't know whether file exits. So we should return false indicate
there are some error appeared.
Test: ran unit tests
Change-Id: I75788bf0621040812413d52596b5effb628fd0b1
Signed-off-by: liwugang <liwugang@xiaomi.com>
There's still <cutils/atomic.h> in a test, but I don't understand why
that isn't just std::atomic.
Also add a shared tgkill wrapper to libbase.
Bug: N/A
Test: ran tests
Change-Id: Idd4baa1e1670a84b3a8f35803cc5ffe5aae008a6
Bug: http://b/69933090
Bug: http://b/69933068
MinGW uses gnu_printf to force C99 printf analysis with GCC, but clang
does not support gnu_printf. So just use the default that's used for
other platforms. This also mirrors upstream commit
015e637b4b/.
Test: m native-host-cross with Clang.
Change-Id: I3deb266d70e25296c4ae1d58637afbabc3d949c1
Bug: http://b/69933068
Bug: http://b/91353691: std::chrono_utils is not available in the
libstdc++ in the mingw/gcc prebuilts. They can be used once we switch
to using libc++ for Windows host.
Test: m native-host-cross with Clang
Change-Id: If9f0f1f201d5e4e445890075ad64c2d6086b0491
I don't think the StdioLogger test ever passed. Move GetFileBasename
to where we can use it from StdioLogger, and undo the mix of anonymous
namespace vs static to consistently use static (which is the majority)
while we're touching those lines.
Bug: N/A
Test: ran tests
Change-Id: I95b3966cdb8af642bed71752bd7d4e3a86ac84ca
adbd (and its dependencies) are marked as recovery_available:true so
that recovery version of the binary is built separately from the one for
system partition. This allows us to stop copying the system version to
the recovery partition and also opens up the way to enable shared
libraries in the recovery partition. Then we can also build adbd as a
dynamic executable.
Bug: 79146551
Test: m -j adbd.recovery
Change-Id: Ib95614c7435f9d0afc02a0c7d5ae1a94e439e32a
Libraries that are direct or indirect dependencies of modules installed
to recovery partition (e.g. toybox) are marked as recovery_available:
true. This allows a recovery variant of the lib is created when it is
depended by other recovery or recovery_available modules.
Bug: 67916654
Bug: 64960723
Test: m -j
Change-Id: Ie59155c08890e96ce1893fa3687afcf763d7aea3
