dev.mnt. properties are primarily intended for tuning parameters for
mounts such as /system and /data but don't have much use for emulated
mounts.
There are additional emulated mounts created for each user on a
device, so if too many users are created, init would otherwise create
too many dev.mnt. properties, filling the property file that backs
these properties, and preventing more properties from being
generated.
Therefore, this change stops init from creating dev.mnt. properties
for emulated mounts.
Bug: 156721033
Test: user creation stress test doesn't create large numbers of
properties
Change-Id: I6475956719b7c938b8289189abfef661140d526d
During boot sequence there can be multiple calls to mount_all. For the
userspace reboot to correctly remount userdata, we need to store the
return code of the one that was responsible in mounting userdata.
Test: adb root
Test: adb shell setprop init.userspace_reboot.is_supported 1
Test: adb reboot userspace
Test: checked dmsg
Bug: 166353152
Change-Id: Id0ae15f3bcf65fa54e4e72b76f64716c053af7fb
Store pertinent information about userspace reboot events in the case
of failure. This information is any services which failed to stop
cleanly, the output of the default fstab and /proc/mounts, and
a list of mounts which failed to unmount. This information is only
stored as necessary (i.e. mount information will not be stored if
everything unmounted, even if some services failed to stop).
Added new /metadata/userspacereboot directory to persist this
information. Information older than 3 days will be deleted.
Test: adb reboot userspace with sigterm/sigkill timeouts set to
very low values
Test: Manual test of storing all other information
Bug: 151820675
Change-Id: I6cfbfae92a7fc6f6c984475cad2c50c559924866
Move responsibility for setting ro.crypto.type into fs_mgr_mount_all,
so that even if setting up the filesystem fails, the type is set
correctly and so errors are appropriately handled.
Bug: 162289984
Test: simulate a failure and check that it's set.
Change-Id: Ib061a454e7e21d7206c3c1fa8e88e16618099581
To support "override" services, we need to scan partitions from least
speicific to most specific.
Bug: 163021585
Test: m
Change-Id: I26a6de4f7fb571c60038e803137a4b1c237792fd
The set of linked binaries was making it difficult to run
the test over a native bridge. Since init won't usually
run over a native bridge, the test can be skipped.
Bug: 161081809, 142324733, 162288553
Test: Arm build of CtsInitTestCases skips rammus-arc-r Chromebook.
Change-Id: Icdd8b03111d0f3fd6658ee6d9a97fca27181db45
(cherry picked from commit 9cecf8422a)
This is correct significant figures/units based on the precision of our
measurements, but it does not reflect our actual certainty re the output
data, since in reality, confidence is diminished by temperature, device,
hardware revision, time of day/month/year, spurious activity, data
connectivity, app install list, inherent randomness of multiprogramming,
sensor activity, user interaction, /data caches, build-by-build
differences, charging state, data fragmentation, race-driven sleeps,
cosmic radiation, factory defects, local magnetic or gravitational field
differences, changes in device momentum, or other known and unknown
causes.
Bug: N/A
Test: run perfboot.py, and output has:
mean: 10801 ms
median: 10801 ms
standard deviation: 18 ms
Change-Id: I796396acc203b29e9a14e4d6dffa58db7b8cd9fb
* changes:
init: Initiate other misc devices from BlockDevInitializer.
Allow snapuserd to be included in the initial ramdisk.
Add experimental daemon for handling dm-user requests.
If the system partition has been updated and _PATH_DEFPATH has a new
value, then we must set $PATH in second stage init to take on the new
value, as well as having set it in first stage init.
Bug: 160210288
Test: build
Change-Id: I18765709dc9bff9379b0ae39272199cf74a79d2f
Presently, within ReadUevent(), true is returned for a successful case
as well as for the case where we read an invalid uevent (overflowed
buffer)where the Uevent object is not cleared, and the caller calls the
callback (with the earlier stored uevent object),leading to duplicate
firmware loading.
Uevent uevent;
while (ReadUevent(&uevent)) {
if (callback(uevent) == ListenerAction::kStop) return;
}
Scenario:
1. Proper Uevent received and callback is called (firmware loading
is triggered).
2. Overflowed uevent is received as part of the same ReadUevent session,
ReadUevent() returns true, but the uevent object is not cleared and
still has earlier event values.
3. Callback is called again, leading to duplicate firmware load.
Handle it by adding explicit return codes to let the caller know if the
uevent read is invalid, and the caller can ignore it and read
further pending uevents.
Bug: 161580785
Change-Id: I09e80052337fd1495b968dc02ecff5ceb683da18
The previous size, 2048, is only the size of the 'environment' for the
uevent message, but doesn't include the <action>@<dev path> portion.
The <action> portion has a max length < 10, but the <dev path> portion
is unbounded.
8192 should be plenty to capture all of these parameters.
Bug: 161580785
Test: ueventd still works
Change-Id: I6de6fd3a444ac91b3b4df154097abde3696e21b3
Load sysprops from /odm_dlkm/etc/build.prop. Note that no
property contexts are loaded from odm_dlkm.
Test: getprop | grep odm_dlkm
Bug: 156020364
Change-Id: I90c3a54a110462736d9888101d4281100d586632
There is documentation for how AIDL works with ctl commands or
interface_start commands, however it seems we were missing documentation
on declaration of interfaces.
Bug: N/A
Test: N/A
Change-Id: I0e5d2350b6b847a870eafbc69828e75f1f6ca4f0
Load sysprops from /vendor_dlkm/build.prop. Note that
no property contexts are loaded from vendor_dlkm.
Test: getprop | grep vendor_dlkm
Bug: 156020364
Change-Id: Ib0e8ba1791e1d2c11d055ef496208993e11d9b0f
This restriction is only added for devices launching with R or later.
Bug: 160663765
Test: this test runs when appropriate
Change-Id: I2353bfa7f598bd19ba57498cc5bbad7a3ed34707
This allows init to easily ensure misc devices other than device-mapper
are present.
Bug: 154536437
Test: manual test
Change-Id: I49495684edee322f9787ce7ab7f79d0e8060171d
Now we have more things e.g. loading kernel modules, initialize
selinux. And before all these, system cannot make further progress. It
should be beneficial to boost this critical peroid in init.
Benchmark on a Pixel device shows this saves 100+ms on early boot
ToT release + This CL (P15538587)
D/BaseBootTest: init_stage_second_START_TIME_avg : 1563.4
D/BaseBootTest: ueventd_Coldboot_avg : 219.0
D/BaseBootTest: action_init_/system/etc/init/hw/init.rc:114_START_TIME_avg : 2103.7
ToT release (6654154)
D/BaseBootTest: init_stage_second_START_TIME_avg : 1639.0
D/BaseBootTest: ueventd_Coldboot_avg : 238.2
D/BaseBootTest: action_init_/system/etc/init/hw/init.rc:114_START_TIME_avg : 2226.0
Bug: 143857500
Bug: 147997403
Bug: 160271169
Bug: 160696502
Test: Boottime
Signed-off-by: Wei Wang <wvw@google.com>
Change-Id: I21c9e051f4ae3e953d991c031f151b2779702548
build.prop files under system_ext, product, and odm partitions are moved
to the ./etc subdirectory. This is to be in-line with the established
practice of having all configuration files under ./etc subdir.
build.prop doesn't need to be an exception.
However, system/build.prop and vendor/build.prop were not moved because
there are a lot of apps and tools that depend on the path.
Bug: 158735147
Test: device has build.prop under ./etc and is bootable
Change-Id: I26300574c23c78cc4e5bc20f98fc9702838465e1
If a device doesn't support unflattened APEXes, init activates flattened
APEXes instead of apexd.
Because apexd dumps apex-info-list.xml after it activates all APEXes,
init should do the same thing.
Bug: 159585065
Test: lunch aosp_cf_x86_phone_noapex & m & boot
adb more /apex/apex-info-list.xml
adb shell ls -lZ /apex/apex-info-list.xml
-> -rw-rw-rw- 1 root root u:object_r:apex_info_file:s0 ..
Change-Id: I74a4d0ee363761564225097c5949e5ce335ac6dc
AMBA specification from Arm is a freely available open
standard for the connection and management of functional
blocks in a system-on-chip.
AMBA devices create a device kernel object in /sys/devices/platform
and a kernel object of the bus for the respective device in
/sys/bus/amba. For e.g. for pl180 mmc:
device: /sys/devices/platform/1c050000.mmci
bus: /sys/bus/amba/devices/1c050000.mmci
In first stage init, android creates a symlink from /sys/devices/platform/...
to /dev/block/platform/... for all partitions and then to
/dev/block/by-name for the boot_device used. However this is only done
for devices that "attach" to bus/platform. This patch adds support for
platform devices that attach to bus/amba.
Signed-off-by: Usama Arif <usama.arif@arm.com>
Change-Id: I9da7456407c4f62335c959502d8b2d16026fddfc
Having mounted apexes with loop back devices backing files on /data
partition will prevent clean unmount of it. Unmounting them and tearing
down loop devices should minimize the risk of that.
Note that it won't fix the issue completely, as there are a few (~2-3)
processes that keep restarting even after SIGKILL is sent. Which means
that they can still hold references to apexes on /data partition. But
in practice probability of this is quite low.
Test: adb reboot
Test: put tzdata apex in /data/apex/active && adb reboot
Bug: 158152940
Change-Id: I4624567b3d0f304dba4c6e37b77abd89e57411de
