The differences between the v1 and v2 hierarchies are as follows:
* Different mountpoints. In Android the blkio v1 hierarchy has
/dev/blkio as top directory while the v2 hierarchy has /sys/fs/cgroup
as top directory.
* Different directory structure. In Android there are two directories in
the v1 blkio hierarchy (. and background) while in the v2 hierarchy
there is one subdirectory per process and per task.
* Different controller names. The name of the blkio controller in the v1
hierarchy is "blkio" while it is "io" in the v2 hierarchy.
* In the v1 hierarchy the NormalIoPriority policy is applied at process
creation time but that policy is not applied at process creation time
if the blkio controller exists in the v2 hierarchy.
Prepare for migration of the blkio controller to the v2 hierarchy by
adding the blkio v2 attributes in task_profiles.json. All these
attributes have been marked as optional because:
* The "io" controller does not exist in the v1 hierarchy.
* Which attributes can be applied depends on the I/O scheduler that has
been selected (CFQ, BFQ, ...).
This patch causes the following warnings to appear in the logs of
devices that mount the blkio controller in the v1 hierarchy:
W libprocessgroup: Controller io is not found
W libprocessgroup: Controller io is not found
W libprocessgroup: Controller io is not found
W libprocessgroup: SetAttribute: unknown attribute: CfqGroupIdle
W libprocessgroup: SetAttribute: unknown attribute: CfqWeight
W libprocessgroup: SetAttribute: unknown attribute: BfqWeight
This patch restores a subset of aosp/1962326 and prepares for the
migration of the blkcg controller to the cgroup v2 hierarchy.
Bug: 213617178
Change-Id: Ia7b117bc777239b416e2ac268308e634b018144d
Signed-off-by: Bart Van Assche <bvanassche@google.com>
There isn't any reason to keep the VMCompilationPerformance special, so
rename to a more generic, reusable name.
One day we may support whatever-purpose VMs using other generic
profiles.
Bug: 231437770
Test: TH
Change-Id: Id7e78ba4d6ea0dc415ed0bc1f4bdf051f7e7fe05
The VMCompilationPerformance profile is used to run Isolated Compilation
in a Protected VM, normally during the device idle, where relevant
APEXes are staged.
The original VMCompilationPerformance introduced in aosp/2060891 does
not have any specific definition and requires vendors to customize it.
This change re-defines it as an aggregated profile with a default set of
existing profiles, so that performance can be reasonable by default.
This profile may be renamed to a more generic name later, e.g.
"SCHED_SP_COMPUTE".
Bug: 231437770
Test: Run `composd_cmd test-compile` on a local device.
Before: 1m50s +/- 10s (with whatever that's default)
After: 1m25s +/- 5s
Change-Id: Ib8cd65782c818474fb129efbd9ef9a3e23ad1eb3
Revert "Migrate the blkio controller to the cgroup v2 hierarchy"
Revert "Migrate the blkio controller to the cgroup v2 hierarchy"
Revert "Migrate the blkio controller to the cgroup v2 hierarchy"
Revert submission 1962326-blkio-cgroup-v2
Reason for revert: This set of changes is suspected to have caused a redfin boot time regression for the git_tm-dev branch.
Reverted Changes:
Id18d876b6:Migrate the blkio controller to the cgroup v2 hier...
I7dfa52136:Migrate the blkio controller to the v2 cgroup hier...
I5336167be:Migrate the blkio controller to the cgroup v2 hier...
I3f0131d8f:Migrate the blkio controller to the cgroup v2 hier...
Ibb62b2d4d:Migrate the blkio controller to the cgroup v2 hier...
Bug: 227382327
Bug: 227389363
Change-Id: I6c8183ed1c3044c8947c4fca07799deff98101b3
This patch preserves the following parameter values:
* Foreground BFQ weight: 100
* Foreground CFQ group_idle: 0
* Foreground CFQ weight: 1000
* Background BFQ weight: 10
* Background CFQ group_idle: 0
* Background CFQ weight: 200
The foreground BFQ weight in task_profiles.json is the default BFQ
weight. From
https://www.kernel.org/doc/Documentation/block/bfq-iosched.txt:
"weight (namely blkio.bfq.weight or io.bfq-weight): the weight of the
group inside its parent. Available values: 1..10000 (default 100). The
linear mapping between ioprio and weights, described at the beginning
of the tunable section, is still valid, but all weights higher than
IOPRIO_BE_NR*10 are mapped to ioprio 0."
Bug: 213617178
Test: Booted Android in Cuttlefish and ran the following test:
Test: adb -e shell cat /sys/fs/cgroup/*/*/io.bfq.weight | sort | uniq -c
Test: 22 default 10
Test: 98 default 100
Change-Id: I7dfa521363a316592852fecce9192708c7a90514
Signed-off-by: Bart Van Assche <bvanassche@google.com>
Some but not all memcg v1 attributes exist in the v2 hierarchy. The
following information comes from Shakeel Butt and Kamil Yurtsever,
"cgroup v2 migration at Google", Linux Plumbers Conference 2018
( https://lpc.events/event/2/contributions/204/attachments/143/378/LPC2018-cgroup-v2.pdf ):
v1 v2
-------------------------- ----------
memory.limit_in_bytes memory.max
memory.soft_limit_in_bytes memory.low
Add support for cgroup attributes that have different names in the v1
and v2 hierarchies. Also add those memcg attributes that are used in
lmkd.
Bug: 213617178
Test: Tested lmkd with v1 and v2 memcg.
Change-Id: Ia5c5f02974f3b783d5cdaad85b33169ced8db55f
Signed-off-by: Bart Van Assche <bvanassche@google.com>
Cgroup attributes like io.weight or io.bfq.weight only exist if the
corresponding I/O scheduler has been loaded. Hence add support for
ignoring failures to write to a cgroup attribute that does not exist.
Bug: 213617178
Test: This patch has been tested in combination with patch "Migrate the blkio controller to the cgroup v2 hierarchy".
Change-Id: I5debafabc4dd430a1b98ea343bf3740c764edcc3
Signed-off-by: Bart Van Assche <bvanassche@google.com>
Cgroup attributes are set from three different contexts:
(1) From the process that creates the cgroup directories. These
processes are /system/bin/init, zygote and zygote64.
(2) From the created process. Some but not all created processes have
user ID and/or group ID 'system'.
(3) The system_server process modifies certain cgroup attributes from
other processes.
Allow all processes from the system group, including system_server, to
modify cgroup attributes from other processes. As one can see in
init.rc, that file includes commands for granting the system group
write permission for blkcg attributes. See also
https://cs.android.com/android/platform/superproject/+/master:system/core/rootdir/init.rc
Bug: 213617178
Test: Verified in the Cuttlefish emulator that this patch makes the
Test: io.bfq.weight write errors disappear from logcat.
Change-Id: Idbfb49c25afec12b21daea7a17db5322bc981ff0
Signed-off-by: Bart Van Assche <bvanassche@google.com>
cgroups.json causes the following changes to be applied twice to
/sys/fs/cgroup: change user ID to system, change group ID to system and
change mode to 0755. Apply these settings once instead of twice.
Bug: 213617178
Test: Ran ls -ld /sys/fs/cgroup in Cuttlefish.
Change-Id: Ieb953c186c027b989599cbbaa70a9c9324678cdf
Signed-off-by: Bart Van Assche <bvanassche@google.com>
Create a new group for dex2oat in cpu cgroup, which is dedicated for
dex2oat processes. Also modify task profiles for this change.
Bug: 201223712
Test: dex2oat group created
Change-Id: Ic61f4b8a64d01c03549b680970805e12b9ce4fcc
Since we are adding SCHED_SP_SYSTEM into framework, the policy is needed
on older releases as well.
Bug: 201428466
Test: Build
Signed-off-by: Wei Wang <wvw@google.com>
Change-Id: I0784820bfec84fd8ef98f2feb2caee084d0a14a2
Since installation time is also critical and sometime we want a finer
control on its behavior for vendor. Instead of set dex2oat to background
group, add a new task profile.
The default policy is to mirror SP_BACKGROUND to be compatible with
legacy devices.
Test: Boot
Bug: 188947181
Signed-off-by: Wei Wang <wvw@google.com>
Change-Id: I7d5e113d1c368205f712eadad27775de226131ce
(cherry picked from commit 3745ce7aa8)
In some platforms, setting a different cpuset (or remove it) and/or
uclamp setting is beneficial to both performance and power. Adding 2
separate profiles for vendor to override surfaceflinger scheduling
policies.
Bug: 170507315
Test: build and boot
Signed-off-by: Wei Wang <wvw@google.com>
Change-Id: Ib313fd67c6ccd701109c5683d8dbab9ecd1580d8
(cherry picked from commit 6d6b71e582)
Memory cgroup controller is not used by high-end Android devices and is
disabled in Android kernels 5.10+, however Android Go devices still
require this controller.
Similarly schedtune controller is being replaced with cpu controller's
utilclamp feature, however some devices are using older kernels which
only support schedtune.
To prevent spamming logcat with errors we need a way to mark a
controller optional in such cases without removing it from
cgroups.json file.
Introduce "Optional" attribute to cgroup controller's cgroups.json
description to accomodate these cases. When an optional controller
fails to mount due to lack of support in the kernel it will log an
informational message without generating further errors.
Bug: 181866655
Test: boot and observe libprocessgroup messages in logcat
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Change-Id: Ib5bcfdd8d338704f3f9d8b326d8ddd88b67915a1
configure the cgroup v2 hierarchy for recovery mode, and create uid/pid
groups with attributes following the container cgroup directory.
Bug: 168907513
Test: verified correct pid migration in normal and recovery modes
Change-Id: Idc8b96b4db075383a6a2e523c241b0bc632c7030
This reverts commit 088924af2a.
Bug: 168907513
Test: verified correct function of the cgroup v2 hierarchy in normal and
recovery mode
Change-Id: I6e9d21ebe832326ed5a5b2c356fe8363c1546a80
This reverts commit 7707909ba2.
Bug: 179006802
Test: verified correct functioning of the freezer after reverting
Change-Id: I848146a18a0879010abf5b00e7081f2771059064
a1a0497984
Bug: 151660495
Test: verified proper boot in regular mode and proper working of adb in
recovery
Change-Id: I1276796e982fee932cdea7eb145f20b3f1b3463d
cc_test_host now all run in presubmit without any need for explicit TEST_MAPPING
Change-Id: I379ef754b4cb645976daedcd04eae58f2eb32a75
Test: presubmit
Bug: 177450457
This reverts commit 1414a0d4d8.
Reason for revert: reversions of CLs from http://b/174776875 removed dependencies for this CL, and made the freezer non-functional. This CL has to be reverted as well
Bug:174776875
Change-Id: Idbd9532374bb661330b3c7546bbdf086a046aba3
Migrate the freezer controller as an attribute for the uid/pid hierarchy
Bug: 168907513
Test: manually verified that the freezer behavior was as expected after
applying the enablers in ActivityManager
Signed-off-by: Marco Ballesio <balejs@google.com>
Change-Id: Ica2c4bfd20190fb2f2dc0a530eb47e1a8427c522
Current per-API level task profiles replace the latest task profiles
rather than overriding the diffs. This poses an issue when a new
feature is added which is applicable to older devices as well we
have to change all per-API level profiles. Change the per-API task
profile support to load the latest task profiles first and then override
with per-API task profiles, similar to how vendor task profiles override
system task profiles. This minimizes the changes we need to do to the
per-API level task profiles going forward and is more consistent with
how vendor task profiles work.
Bug: 170507876
Test: boot with per-API task profiles
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Change-Id: I08cc4b374cede7363cf96a30ac96971d49bb7847
Enable the uid/pid hierarchy for all groups when using cgroup v2. Mount
the hierarchy under the cgroup v2 root. Make sure that all files under
the hierarchy are accessible by the system user.
Test: booted the device, tested the freezer cgroup, manually verified
the working of the freezer from logs and by checking statuses of
processes.
Bug: 168907513
Test: Booted the device, verified no regressions on process group access
Change-Id: I73f3e767d377902af6e12facb503b9136fb39e08
When task profiles changes happen, devices released under older API
levels might have to use the same profiles as before. This might be
due to for missing kernel features or some other reasons. Add support
for per-API task profiles to accommodate this scenario. With this
mechanism when ro.product.first_api_level is non-empty, the system
looks for /system/etc/profiles/task_profiles_<api level>.json file
and uses it if it exists. If ro.product.first_api_level is not defined
or per-API task profiles file does not exist the system falls back to
the default /system/etc/profiles/task_profiles.json file.
As before, these task profiles can be competely overwritten using
/vendor/etc/task_profiles.json if needed.
Bug: 172066799
Test: boot with per-API task profiles
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Change-Id: I1671b341b3a0fb5e99d0b0788315c61088326b09
Put tasks into a subgroup so that we can set things up e.g. soft cpu
bandwidth and/or uclamp.
Bug: 170507876
Bug: 171740453
Test: boot and check cgroup
Change-Id: Iaeb081bc4f214aa23eb281e0c28a81ea581bb4d1
cgroups v2 support introduces new fields in the json format. Adapt the
proto file accordingly
Bug: 154548692
Test: atest libprocessgroup_proto_test --
Change-Id: I40f8757a8f4e6a0b839caa7faa976dfebf3aac98
remove cgroup v1 freezer entries from init.rc, add a new cgroup v2
controller and modify plists to properly interact with it.
Bug: 154548692
Test: manually verified the the cgroup v1 freezer controller isn't
created and a new controller for cgroup v2 is created under the correct
sysfs directory.
Change-Id: I1b811300ade486f88fdbd157255a7f37750cc54d
create new profiles to allowing thawing and freezing back the freezer
cgroup
Bug: 151225245
Test: Manually verified that using the SetTaskProfiles method on the
profiles thaws and freezes back the freezer cgroup.
Change-Id: I7f3e193ebe79b49c1f6ac52b6138ff4ec26fc570
task_profiles.json currently uses attributes of a defunct version of
uclamp, which was used for testing.
Let's use the attributes that actually got merged upstream instead.
Bug: 143710295
Change-Id: Ic6a14f52e14efeefc91f6e6bf580c15e2eded82e
Signed-off-by: Quentin Perret <qperret@google.com>
