logger_entry has a hdr_size field meant for backwards compatibility,
however there are a few checks that expect it to be a specific size.
More problematically, it has a variable length array element, msg[0]
at the end, that would be incorrect if the header size was not kept
static.
This change fixes up those issues to facilitate future additions.
Bug: 119867234
Test: logging works with extended size headers, logging unit tests
Test: newly added unit tests with extended size header
Merged-In: I14b2b0855d219d11f374b53a5aa8e05cd6a65eef
Change-Id: I14b2b0855d219d11f374b53a5aa8e05cd6a65eef
(cherry picked from commit d3ecc66b9c)
/sys/class/power_supply/*/current_now should return uA and the HAL
expects uA too.
Test: VtsHalHealthV2_0TargetTest
Bug: 136717180
Change-Id: I675be1ae645413b9494af4a5d49955aad5bd4f2e
(cherry picked from commit e5bd5f914f)
Merged-In: I675be1ae645413b9494af4a5d49955aad5bd4f2e
In recovery mode, load modules from modules.load.recovery if it
exists. Otherwise load from modules.load as usual.
Bug: 150825361
Change-Id: I7636bb5958ed10ae9a66015f04f168129618272f
Merged-In: I7636bb5958ed10ae9a66015f04f168129618272f
To make it easier to support disk formats created using old versions
of dm-default-key with new kernels, stop checking the kernel module
version; instead, the caller decides whether to use the old or new
options format.
Bug: 150761030
Test: crosshatch and cuttlefish boot normally; cuttlefish
fails with "default-key: Not enough arguments" as expected when
option is set to 1
Cherry-Picked-From: 539b98fb58
Merged-In: I810bb7e085b9b8648858de1a02165162d1fd163e
Change-Id: I810bb7e085b9b8648858de1a02165162d1fd163e
Use realpath as a canonical representation of block devices. This makes
it easier to reason about block devices. This also fixes a bug, in which
fs_mgr_get_mounted_entry_for_userdata didn't properly work on devices
that don't support metadata encryption.
Test: atest CtsFsMgrTestCases
Test: atest CtsUserspaceRebootHostSideTestCases
Bug: 153363818
Change-Id: I139c2be46336a632bbaee86667019c075d7de814
Merged-In: I139c2be46336a632bbaee86667019c075d7de814
(cherry picked from commit 7aa37f1f21)
Test: bit statsd_test:*
Test: bit libstatssocket_test:*
Test: bit libstatspull_test:*
Bug: 153349659
Change-Id: Ief3d0e062ed3e5cabf5b8b6198510caf3f64eefd
This reverts commit d9684d5943.
This seems to be correlated with an increase in the rate of devices
going offline. Revert it to see if failure rates improve.
Bug: http://b/150863651
Test: treehugger
Change-Id: Ia6163fd9e31d2bf812628e028249662594ac2024
Bug: 151896491
Test: presubmit check
Exempt-From-Owner-Approval: This CL renames suite name vts-core to vts.
It won't change test logic or behavior.
Change-Id: I24779951257ce37fc18929f214d3cf5f76c23a19
The tests are only needed in vts10 suite, as they are part of CTS
package and no longer needed in vts 11.
Bug: 151896491
Test: local build
Exempt-From-Owner-Approval: This CL removes vts10 tests from vts suite.
It won't change test logic or behavior.
Change-Id: I4d468be075b54213b56c7e1aa94af94f2bdce9ff
Merged-In: I4d468be075b54213b56c7e1aa94af94f2bdce9ff
tl,dr;
Increase the attempts to 50 to reduce the chances of failing
to load the serial console. This will only happen if the cmdline
parameter "androidboot.first_stage_console=1" is enabled.
Details:
10 attempts only amounts to about 1 second of trying to open the serial
console. I tested booting an ACK GKI image 5x with 20 vendor modules and
found the serial console loaded on attempt 17 for all five boot
tests.
Bug: 153354917
Test: boot ACK image 5x and verify serial console comes up
Change-Id: I161a4176b2c6cf7b0bc1eefe072ff38b894add5d
Add VTS10 variant of vts_libsnapshot_test so that
it can be added to vts-kernel test.
Bug: 142513589
Test: vts10-tradefed run vts-kernel -m VtsLibnsapshotTest
Change-Id: I4e2516b94d84acb16f595aab87dd3c0cadad6166
(cherry picked from commit 405da5a9a6)
Merged-In: I4e2516b94d84acb16f595aab87dd3c0cadad6166
Vendors may add additional functionfs mounts. Since these
will never be remounted, we can safely filter these out.
Bug: 153008210
Test: Test device with previously unfiltered entries.
Change-Id: I7f384b8a0ce93dd6701fe3c4d9dd2557370b31e1
Merged-In: I7f384b8a0ce93dd6701fe3c4d9dd2557370b31e1
These are provided to userspace by newer kernels.
Test: builds
Bug: 150648313
Change-Id: I811c75e9a4739db149f502b9a43c99a8ed883341
Merged-In: I811c75e9a4739db149f502b9a43c99a8ed883341
Devices in the lab are hitting an issue where they're getting stuck
likely in the sync() call in DoReboot() before we start the reboot
monitor thread and before we shut down services.
It's possible that concurrent writing to RW file systems is causing
this sync() call to take essentially forever. To protect against
this, we need to remove this sync(). Note that we will still call
sync() after shutting down services.
Note that the service shutdown code has a timeout and there is a
reboot monitor thread that will shutdown the device if more than 30
seconds pass above that timeout. This change increases that timeout
to 300 seconds to give the final sync() calls explicitly more time to
finish.
Bug: 150863651
Test: reboot functions normally
Test: put an infinite loop in DoReboot and the the reboot monitor thread
triggers and shuts down the device appropriately
Merged-In: I6fd7d3a25d3225081388e39a14c9fdab21b592ba
Change-Id: I6fd7d3a25d3225081388e39a14c9fdab21b592ba
(cherry picked from commit 10615eb397)
This should help in debugging issues related to the mismatch between
actual last reboot reason property and the expected one (see attached
bug).
Test: adb reboot
Test: adb logcat | grep bootstat
Bug: 152900920
Change-Id: I085cf1fb80a30389fd3ba821d40b6111a3294d95
Merged-In: I085cf1fb80a30389fd3ba821d40b6111a3294d95
(cherry picked from commit 49062f3b72)
Previously, after `adb reboot userspace` is called on a device that
doesn't suppor it, init would've logged an error and quietly exit the
shutdown sequence. This was leaving adb handing forever.
With this approach, init will fail setprop
"sys.powerctl=reboot,userspace" in case userspace reboot is not
supported.
Test: adb root
Test: adb setprop init.userspace_reboot.is_supported 0
Test: adb reboot userspace
Test: atest CtsInitTestCases
Bug: 146639622
Change-Id: I1264078f53ed3ff54638c7f3b6846b7437f98ee5
Merged-In: I1264078f53ed3ff54638c7f3b6846b7437f98ee5
(cherry picked from commit 92116e4129)
APEXes introduced in R need to set min_sdk_version to ensure that they
are built against correct version(30 or R) of stubs (libc/liblog/...).
Bug: 152655956
Test: /vendor/google/build/build_mainline_modules.sh
Change-Id: Id3f94a2ac09bd7bf7f9a4a0c2f62b624f29509d0
General recommendation is to avoid read-only properties, and instead control
"read-onlines" by only allowing init/vendor_init to set the property.
Since ro.init.userspace_reboot.is_supported was added in this release, and
nobody outside of the platform is querying it directly, it should be fine to
simply rename it.
Test: adb shell getprop init.userspace_reboot.is_supported
Test: atest CtsUserspaceRebootHostSideTestCases
Bug: 152803929
Change-Id: I7552d5ccc6e9b750a6081947eef8fcb027be13e1
Merged-In: I7552d5ccc6e9b750a6081947eef8fcb027be13e1
(cherry picked from commit 663cd35030)
Temporarily delete adb_benchmark, since it seems difficult to make this
sensibly work with a single target that's used for both libadb and
libadbd benchmarking.
Bug: http://b/150317254
Test: treehugger
Change-Id: Ibf81fdff4f2b7304b586ce9a7955b4bc2c11484e
Merged-In: Ibf81fdff4f2b7304b586ce9a7955b4bc2c11484e
(cherry picked from commit c6cb89ea80)
This code path is effectively dead in adbd, and fastboot's dependency on
libadbd makes it hard to refactor adbd's dependencies.
Bug: http://b/150317254
Test: built and flashed aosp_walleye-eng
Change-Id: I5118136d32fdcbbd011559ed0a4a71e1dc7bf064
Merged-In: I5118136d32fdcbbd011559ed0a4a71e1dc7bf064
(cherry picked from commit 0871824de6)
Incremental doesn't support apex installation, but we were exiting
instead of returning -1 to fall back to regular installation.
Bug: http://b/151900478
Test: manual
Change-Id: Id27009250090a65fbb45bb65fc39c1799bf1f861
Merged-In: Id27009250090a65fbb45bb65fc39c1799bf1f861
This CL turns on the incremental installation for all
"adb install ..." commands where no explicit mode has been set.
To disable this, set the ADB_INSTALL_DEFAULT_INCREMENTAL
environment variable to 0/n/no/false. Unset to enable back
+ improve the install command argument parsing a bit: allow
--wait for all installation modes, --incr is enough for
an incremental install (and --no-incr to disable it)
Bug: 150183149
Test: adb install with different apks and command line switches
Change-Id: I1a237f34b70d920146746ab16104e28ef555a5fd
Merged-In: I1a237f34b70d920146746ab16104e28ef555a5fd
Bug: 152630580
Bug: 152637928
Bug: 152662041
Bug: 152662652
Test: this test is skipped when run as non-root
Merged-In: I7118025cc20081a200000bf484a08c9ed0b0d3ec
Change-Id: I7118025cc20081a200000bf484a08c9ed0b0d3ec
(cherry picked from commit 14f4afd2f2)
We already stop queue'ing new control messages, but we forgot to stop
handling those control messages that are already queued. This CL
fixes that.
Bug: 150863651
Test: CF reboots appropriately
Merged-In: Ifea07a30b868de23eb735db10d8bae410e1b98bb
Change-Id: Ifea07a30b868de23eb735db10d8bae410e1b98bb
(cherry picked from commit 22d6348845)
