Exec services may also want to set other service flags such as
priority. Instead of expanding the exec syntax to handle this, create
a new command, exec_start, that will treat an existing service
definition as an exec service. The new exec_start command will start
the service then halt init from executing further commands until the
service has exited.
This change additionally encapsulates the waiting_for_exec logic into
ServiceManager and removes the ambiguous 'bool' return value from
Reap() which previously indicated if a Reaped service was an exec
service or not.
Bug: 36511808
Bug: 36102163
Test: Bullhead boots, services run with exec_start as they do exec.
Change-Id: I44f775cf1c1dd81d5c715f44fdc150c651a2c80a
(cherry picked from commit b27004aa05)
Add support of multiple class names in service, so that related services
can be grouped together. By doing this, we can start/stop some services
for special purpose. For example, early zygote, early boot animation
and etc.
Bug: 36535312
Test: marlin boots with defined classes
Change-Id: Ifeaaf034fd836816e24f3775bece53ea83faada6
- Emergency shutdown just marks the fs as clean while leaving fs
in the middle of any state. Do not use it anymore.
- Changed android_reboot to set sys.powerctl property so that
all shutdown can be done by init.
- Normal reboot sequence changed to
1. Terminate processes (give time to clean up). And wait for
completion based on ro.build.shutdown_timeout.
Default value (when not set) is changed to 3 secs. If it is 0, do not
terminate processes.
2. Kill all remaining services except critical services for shutdown.
3. Shutdown vold using "vdc volume shutdown"
4. umount all emulated partitions. If it fails, just detach.
Wait in step 5 can handle it.
5. Try umounting R/W block devices for up to max timeout.
If it fails, try DETACH.
If umount fails to complete before reboot, it can be detected when
system reboots.
6. Reboot
- Log shutdown time and umount stat to log so that it can be collected after reboot
- To umount emulated partitions, all pending writes inside kernel should
be completed.
- To umount /data partition, all emulated partitions on top of /data should
be umounted and all pending writes should be completed.
- umount retry will only wait up to timeout. If there are too many pending
writes, reboot will discard them and e2fsck after reboot will fix any file system
issues.
bug: 36004738
bug: 32246772
Test: many reboots combining reboot from UI and adb reboot. Check last_kmsg and
fs_stat after reboot.
Change-Id: I6e74d6c68a21e76e08cc0438573d1586fd9aaee2
Use this for bootstat and init. This replaces the custom uptime parser in
bootstat.
This is a reland of aosp/332854 with a fix for Darwin.
Bug: 34352037
Test: chrono_utils_test
Change-Id: Ib2567d8df0e460ab59753ac1c053dd7f9f1008a7
With this change, init sets a property "init.start" to show the
CLOCK_BOOTTIME time at which init itself started, and for each service
an "init.svc.<name>.start" property to show the CLOCK_BOOTTIME time at
which that service was most recently started.
These times can be used by tools like bootstat to track boot time.
As part of this change, move init over to std::chrono. Also, rather than
make the command-line argument handling more complex, I've switched to
using an environment variable for communication between first- and
second-stage init, and added another environment variable to pass the
start time of the first stage through to the second stage.
Bug: http://b/32780225
Test: manual
Change-Id: Ia65a623e1866ea688b9a5433d6507926ce301dfe
Solve one more issue where privilege is required to open a file and
we do not want to grant such to the service. This is the service side
of the picture, android_get_control_file() in libcutils is the client.
The file's descriptor is placed into the environment as
"ANDROID_FILE_<path>". For socket and files where non-alpha and
non-numeric characters in the <name/path> are replaced with _. There
was an accompanying change in android_get_control_socket() to match
in commit 'libcutils: add android_get_control_socket() test'
Add a gTest unit test for this that tests create_file and
android_get_control_file().
Test: gTest init_tests --gtest_filter=util.create_file
Bug: 32450474
Change-Id: I96eb970c707db6d51a9885873329ba1cb1f23140
Ambient capabilities are inherited in a straightforward way across
execve(2):
"
If you are nonroot but you have a capability, you can add it to pA.
If you do so, your children get that capability in pA, pP, and pE.
For example, you can set pA = CAP_NET_BIND_SERVICE, and your
children can automatically bind low-numbered ports.
"
This will allow us to get rid of the special meaning for AID_NET_ADMIN
and AID_NET_RAW, and if desired, to reduce the use of file capabilities
(which grant capabilities to any process that can execute the file). An
additional benefit of the latter is that a single .rc file can specify
all properties for a service, without having to rely on a separate file
for file capabilities.
Ambient capabilities are supported starting with kernel 4.3 and have
been backported to all Android common kernels back to 3.10.
I chose to not use Minijail here (though I'm still using libcap) for
two reasons:
1-The Minijail code is designed to work in situations where the process
is holding any set of capabilities, so it's more complex. The situation
when forking from init allows for simpler code.
2-The way Minijail is structured right now, we would not be able to
make the required SELinux calls between UID/GID dropping and other priv
dropping code. In the future, it will make sense to add some sort of
"hook" to Minijail so that it can be used in situations where we want
to do other operations between some of the privilege-dropping
operations carried out by Minijail.
Bug: 32438163
Test: Use sample service.
Change-Id: I3226cc95769d1beacbae619cb6c6e6a5425890fb
* Use const reference type for parameters to avoid unnecessary copy.
* Suppress warning of not using faster overloaded string find function.
Bug: 30407689
Bug: 30411878
Change-Id: I6cfdbbd50cf5e8f3db6e5263076d3a17a9a791ee
Test: build with WITH_TIDY=1
Merged-In: Ie79dbe21899867bc62031f8618bb1322b8071525
This CL extracts code from Service::Start into four helper functions,
bringing Service::Start down to 134 lines vs 212 lines originally. This
makes the method a lot easier to follow. There is no change in behaviour.
Also, make error messages consistent (start with lowercase) and
format Service::Start to fit in 100 cols.
Bug: 30035168
Change-Id: If979976fba4d339a336d030f802ca9f169fd012c
This CL allows enabling of multiple consoles. A service can be
mapped to a specific console by providing the optional argument,
IE "tty0", to "console" service attribute as follows:
service fbconsole /system/bin/sh
class core
console tty0
disabled
user shell
group shell log readproc
seclabel u:r:shell:s0
Bug: None
Change-Id: I3b24e7f6848bbe5c6475f11334c04ec536e6af88
Tracked-On: https://jira01.devtools.intel.com/browse/BP-289
Signed-off-by: Viorel Suman <viorel.suman@intel.com>
This CL allows enabling of multiple consoles. The expected format
of "androidboot.console" kernel parameter is a list of available
consoles, as follows:
androidboot.console=tty0:ttyS0
A service can be mapped to a specific console by providing the
optional argument, IE "tty0", to "console" service attribute as follows:
service fbconsole /system/bin/sh
class core
console tty0
disabled
user shell
group shell log readproc
seclabel u:r:shell:s0
Bug: None
Change-Id: I3f8556425c8651bd121995869700f18b23365d55
Tracked-On: https://jira01.devtools.intel.com/browse/BP-289
When ro.build.shutdown_timeout is set, init will send a SIGTERM signal to
all services on reboot. The normal shutdown process will continue once
all services have exited or after the shutdown timeout
(ro.build.shutdown_timeout).
If ro.build.shutdown_timeout is not set, we assume a 0s timeout.
Bug: 26216447
Test: manual: Ask to reboot. All services exit cleanly.
Change-Id: If921f6e8d87211e500ac9fa86f3e1eabe02d18cf
Create a Parser class that uses multiple SectionParser interfaces to
handle parsing the different sections of an init rc.
Create an ActionParser and ServiceParser that implement SectionParser
and parse the sections corresponding to Action and Service
classes.
Remove the legacy keyword structure and replace it with std::map's
that map keyword -> (minimum args, maximum args, function pointer) for
Commands and Service Options.
Create an ImportParser that implements SectionParser and handles the
import 'section'.
Clean up the unsafe memory handling of the Action class by using
std::unique_ptr.
Change-Id: Ic5ea5510cb956dbc3f78745a35096ca7d6da7085
