Reduce the amount of time that a process remains paused by pausing its
threads, fetching their registers, and then performing unwinding on a
copy of its address space. This also works around a kernel change
that's in 4.9 that prevents ptrace from reading memory of processes
that we don't have immediate permissions to ptrace (even if we
previously ptraced them).
Bug: http://b/62112103
Bug: http://b/63989615
Test: treehugger
Change-Id: I7b9cc5dd8f54a354bc61f1bda0d2b7a8a55733c4
Nobody is looking at the mismatches, and it can cause problems
with tombstone parsers.
Also, fix the dump_header_info test and remove unused properties_fake.cpp.
Test: Ran unit tests, verified tombstones still work.
Change-Id: I4261646016b4e84b26a5aee72f3227f1ce48ec9a
Move libdebuggerd headers into their own directory for namespacing,
move some includes to the top of their implementing files, delete some
dead code.
Test: mma, treehugger
Change-Id: Ie4c44e32e2ab3bc678092899d257fd4ed634aa34
Instead of printing a useless "ptrace attach failed: strerror(EPERM)"
message, print the name and pid of a competing tracer when we fail to
attach because a process is already being ptraced.
Bug: http://b/31531918
Test: debuggerd_test32, debuggerd_test64 on aosp_angler
Test: strace -p `pidof surfaceflinger`; debuggerd -b surfaceflinger
Change-Id: Ifd3f80fe03de30ff38c0e0068560a7b12875f29d
In debuggerd, when dumping a tombstone, run the new unwinder and verify
the old and new unwinder are the same. If not, dump enough information
in the tombstones to figure out how to duplicate the failure.
Bug: 23762183
Test: Builds, ran and forced a mismatch and verified output.
Change-Id: Ia178bde64d67e623d4f35086ebda68aebbff0c3c
Some processes have lots of threads and minidebug-info. Unwinding
these can take more than the original two seconds.
Bug: 62828735
Test: m
Test: debuggerd_test
Test: adb shell kill -s 6 `pid system_server`
Change-Id: I0041bd01753135ef9d86783a3c6a5cbca1c5bbad
Don't pause the threads we're going to dump until after we're about to
fetch their backtraces.
Bug: http://b/62112103
Test: debuggerd_test
Change-Id: Id7ab0464842b35f98f3b3ebc42fb76161d8afbd2
Add some tracing to figure out where time is going during a dump.
Bug: http://b/62112103
Test: systrace.py sched freq idle bionic
Change-Id: Ic2a212beeb0bb0350b4d9c2cd7a4e70adc97752d
crash_dump inherits its signal mask from the thread that forked it,
which always has all of its signals blocked, now that sigchain respects
sa_mask.
Manually clear the signal mask, and reduce the timeout to a
still-generous 2 seconds.
Bug: http://b/38427757
Test: manually inserted sleep in crash_dump
Change-Id: If1c9adb68777b71fb19d9b0f47d6998733ed8f52
All intercept requests and crash dump requests must now specify a
dump_type, which can be one of kDebuggerdNativeBacktrace,
kDebuggerdTombstone or kDebuggerdJavaBacktrace. Each process can have
only one outstanding intercept registered at a time.
There's only one non-trivial change in this changeset; and that is
to crash_dump. We now pass the type of dump via a command line
argument instead of inferring it from the (resent) signal, this allows
us to connect to tombstoned before we wait for the signal as the
protocol requires.
Test: debuggerd_test
Change-Id: I189b215acfecd08ac52ab29117e3465da00e3a37
.. for ART and the frameworks to link against. In the new stack dumping
scheme (see related bug), the Java runtime will communicate with
tombstoned in order to obtain a FD to which it can write its traces.
Also move things around to separate headers that are private
implementation details from headers that constitute the public debuggerd
API. There are currently only three such headers :
- tombstoned/tombstoned.h
- debuggerd/client.h
- debuggerd/handler.h
Bug: 32064548
Test: make
Change-Id: If1b8578550e373d84828b180bbe585f1088d1aa3
Processes that don't have dumpable set to 1 cannot have their
process/thread names read by processes that don't have all of their
capabilities. Fetch these names in crash_dump before dropping
privileges.
Bug: http://b/36237221
Test: debuggerd_test
Test: debuggerd -b `pidof android.hardware.bluetooth@1.0-service`
Change-Id: I174769e7b3c1ea9f11f9c8cbdff83028a4225783
If a process that's getting dumped dies before crash_dump starts (e.g.
because seccomp immediately kills it after it execs crash_dump),
improve the error message to not just say "target died before we could
attach".
Bug: http://b/36077710
Test: inserted an exit in the handler, inspected output
Change-Id: I7d394c66d60d328b096b15654b3648e1ed711728
We already check our /proc/`getppid()` fd every time we attach a thread, so
these were unneeded at best. The one that happened after dropping
capabilities was actively wrong, though, because /proc/pid access
checks happen on every operation. (only on some kernels?)
Also, add a check that getppid() doesn't change after opening
/proc/getppid().
Bug: http://b/35241370
Test: debuggerd -b `pidof com.android.bluetooth`
Change-Id: I807439d8c2afd027f3c382face50167a8a7946c4
Do an in-process unwind for processes that have PR_SET_NO_NEW_PRIVS
enabled.
Bug: http://b/34684590
Test: debuggerd_test, killall -ABRT media.codec
Change-Id: I62562ec2c419d6643970100ab1cc0288982a1eed
Set and restore PR_SET_DUMPABLE when performing a dump, so that
processes that have it implicitly cleared (e.g. services that acquire
filesystem capabilities) still get crash dumps.
Bug: http://b/35174939
Test: debuggerd -b `pidof surfaceflinger`
Change-Id: Ife933c10086e546726dec12a7efa3f9cedfeea60
/proc/<pid>/fd is also limited by ptrace_may_access.
Test: manual inspection of "debuggerd -b `pidof zygote`"
Change-Id: I1a28c21c0438fe8729bd8e041c6b418d6a84c586
Reading /proc/<pid>/maps does a ptrace_may_access check, which will
fail if we have fewer capabilities than the target, even if we've
already ptraced it.
Bug: http://b/35070339
Test: debuggerd -b `pidof zygote`
Change-Id: I984a061022bd945a7950b88f6d579e1bd735e893
Dump all of the threads when using `debuggerd -b`.
Bug: http://b/34719257
Test: `debuggerd -b mediaserver`
Change-Id: I2f57100985e5b0c2bf019482ba9feff31921692f
PTRACE_DETACH is only necessary if the process is in group-stop state,
the tracer exiting is sufficient to detach and resume tracees.
Using this, set a 5 second timer with alarm(2) that just kills us, to
avoid leaving processes stopped.
Bug: http://b/34472671
Test: debuggerd_test
Test: crasher + manually inserting a 10 second sleep into crash_dump
Change-Id: Iacaa796f79037aa1585f3f2159abe45ef0069311
ptrace(PTRACE_ATTACH) does not immediately put the traced process in a
stopped state. If we manage to call PTRACE_CONT on it before it
finishes, we'll fail. Switch to using PTRACE_SEIZE and PTRACE_INTERRUPT
to guarantee that the target stops immediately.
This also has the advantage of never putting the process in group-stop
state, which means if we exit prematurely (e.g. if we crash during
stack unwinding), the target process will be resumed without any
intervention needed.
Bug: http://b/34472671
Test: while true; do debuggerd -b `pidof audioserver`; done
Change-Id: I7549f67489646cf300b8c9aa8c735e5e897806ef
crash_dump is a dynamic executable that gets the default crash dumping
handlers set by the linker. Turn them off to prevent crash_dump from
dumping itself.
Bug: http://b/34472671
Test: inserted an abort into crash_dump
Change-Id: Ic9d708805ad47afbb2a9ff37e2ca059f23f421de
A TOCTOU race can occur between listing threads and attaching them.
Don't abort and leave the process in a stopped state when this happens.
Bug: http://b/34472671
Test: while true; do debuggerd -b `pidof audioserver`; done
Change-Id: Ib1632c3423fddf506b5c7874223c82fada78a85e
Remove debuggerd in favor of a helper process that gets execed by
crashing processes.
Bug: http://b/30705528
Test: debuggerd_test
Change-Id: I9906c69473989cbf7fe5ea6cccf9a9c563d75906
