SELinux messages weren't properly filtering into the events buffer
because message_len was being used to determine length of event data
instead of str_len
Bug: 65597269
Test: SELinux denials show up in the events buffer
Change-Id: I857e10211f71dd0db33a272241c7051c5d0c59ca
(cherry picked from commit 3a5acdaa8d)
Select a low rate-limit to cut down on logspam and resulting
performance regressions.
Functionally reverts 247d682fe1
(logd: sepolicy dynamic rate limiting) and sets a static low
rate-limit. Before 247d682f, the limit was statically set to 20.
247d682f continued to support 20, but if sustained dropped the limit
to 5. This revert leaves us at 5 so as not to impact performance.
Test: /data/nativetest/logd-unit-tests/logd-unit-tests \
--gtest_filter=logd.sepolicy_rate_limiter
[ PASSED ] 1 test.
Bug: 71538411
Change-Id: I6c92f4ba825cc24beb8f1f1b79258fa8097c837b
logd suffers performance degradation when multiple blocking
readers connect to it. Each time when the writer thread log
new entries, all of the readers are notified regardless of
which log id they are watching.
In this case, only give notification to the readers who are
actually watching new entries' log id. This decreases logd
CPU consumption by skipping unnecessary LogBuffer::flushTo
loops.
Test: liblog-unit-tests, logd-unit-tests & CtsLiblogTestCases
logcat-unit-tests
Test: manual:
1.'logcat –b all' at constant heavy logging load level
2.simultaneously 'logcat –b crash' in another session,
a healthy crash buffer usually keep empty
3.logd CPU consumption doesn't increase after step 2
Change-Id: I4ffc045c9feb7a0998f7e47ae2173f8f6aa28e8a
The feature references a new file created by the selinux make system
that is stored on device under /system/etc/selinux/ which contains a
scontext, tcontext, tclass, and the bug they map to. logd will
reference this map every time an selinux denial comes through to see if
it's a known denial with a bug attached and then add the bug number to
the denial that's logged.
go/selinux-bug-metadata
Bug: 34997782
Test: any denial -> bug map listed in the referenced file is correcty
displayed in the selinux denials that are logged
Change-Id: I75bab59917591ed700471a0b4922b5f02f86bee9
Switch to a reader writer lock for the Element List lock. Also setup
for a reader writer lock for the Times list, but continue to use a
mutex where rdlock() and wrlock() are the same implementation for now.
This should improve general reader performance and prevent blocking of
other reader operations or exit by a single hung logd.reader.per
thread. For example, a full length logcat of an empty buffer (eg:
crash log buffer) will hold a lock while the iterator scans the entire
list.
Test: gTest liblog-unit-tests, logd-unit-tests, logcat-unit-tests
Bug: 37378309
Bug: 37483775
Change-Id: If5723ff4a978e17d828a75321e8f0ba91d4a09e0
Switch _all_ file's coding style to match to ease all future changes.
SideEffects: None
Test: compile
Bug: 35373582
Change-Id: I470cb17f64fa48f14aafc02f574e296bffe3a3f3
Processing overhead for selinux violation messages is costly. We want
to deal with bursts of violations, but we have no intent of allowing
that sustained burst to go unabated as there is a cost of processing
and battery usage.
Tunables in libaudit.h are:
AUDIT_RATE_LIMIT_DEFAULT 20 /* acceptable burst rate */
AUDIT_RATE_LIMIT_BURST_DURATION 10 /* number of seconds of burst */
AUDIT_RATE_LIMIT_MAX 5 /* acceptable sustained rate */
Since we can only asymptotically handle DEFAULT rate, we set an upper
threshold of half way between the MAX and DEFAULT rate.
Default kernel audit subsystem message rate is set to 20 a second.
If sepolicy exceeds 125 violation messages over up to ten seconds
(>=~12/s), tell kernel audit subsystem to drop the rate to 5 messages
a second. If rate drops below 50 messages over the past ten seconds
(<5/s), tell kernel it is ok to increase the burst rate back to 20
messages a second.
Test: gTest logd-unit-tests --gtest_filter=logd.sepolicy_rate_limiter_*
Bug: 27878170
Change-Id: I843f8dcfbb3ecfbbe94a4865ea332c858e3be7f2
Some kernels have a bug which causes a newline to show up in audit
messages. The embedded newlines cause one message to look like two due
to prefix controls.
Replace any newlines with spaces. Duplicate spaces are further
consolidated in code immediately after this newly added code.
Test: create an audit message with a newline, and watch it be cleaned up.
Bug: 27878170
Change-Id: Id90c29ab9e10d3be96f51403b0293622d782422a
log selinux audit messages boolean (true or false, default true)
selection for logging destinations:
ro.logd.auditd - turn on logd.auditd to pick up violations.
ro.logd.auditd.dmesg - to the kernel log.
ro.logd.auditd.main - to the "main" log buffer.
ro.logd.auditd.events - to the "events" log buffer.
We used to also read logd.auditd.dmesg and persist.logd.auditd.dmesg
which do not get refreshed when /data mounts internally. This is a
confusing state as these properties will be read after a logd crash
and restart, adjusting the behavior of the logger. Same can be said
for logd.auditd as well. Drop reading these other parameters.
Test: manual set r/o parameters, stop/start logd to confirm behavior
Bug: 33969000
Bug: 27878170
Change-Id: I1a6bb4a903074c9aa7b227cf583a0094d49cbefd
If a series of messages arrive from a single source with identical
message content payload, then suppress them and generate a chatty
report. The checking is done on a per log id basis.
This alters the assumption that chatty messages are always at the
oldest entries, they now show up in the middle too. To address this
change in behavior we print the first line, a chatty reference
which internally takes little space, then the last line in the series.
This does not conserve processing time in logd, and certainly has no
impact on the long path of formatting and submitting log messages from
from the source, but it may contribute to memory space and signal to
noise savings under heavy spammy loads.
Test: gTest liblog-unit-tests, logd-unit-tests & logcat-unit-tests
Bug: 33535908
Change-Id: I3160c36d4f4e2f8216f528605a1b3993173f4dec
Point to log/log.h where necessary, define LOG_TAG where necessary.
Accept that private/android_logger.h is suitable replacement for
log/logger.h and android/log.h.
Correct liblog/README
Effectively a cleanup and controlled select revert of
'system/core: drop or replace log/logger.h' and
'system/core: Replace log/log.h with android/log.h'.
Test: compile
Bug: 30465923
Change-Id: Ic2ad157bad6f5efe2c6af293a73bb753300b17a2
Sends first and last of a series of 3 or more indentical avc:
messages to kmsg and adds 'duplicate messages suppressed'
for the last one in the set. eg:
[67.141658] type=1400 audit(1468852100.171:70): avc: ... tcontext=u:object_r:proc:s0 tclass=file
[67.141678] type=1400 audit(1468852107.494:71): avc: ... tcontext=u:object_r:cache_file:s0 tclass=dir
[67.535202] type=1400 audit(1468852107.498:74): avc: ... tcontext=u:object_r:cache_file:s0 tclass=dir duplicate messages suppressed
[67.535227] type=1400 audit(1468852107.888:75): avc: ... tcontext=u:object_r:proc_net:s0 tclass=file
One can look at the sequence numbers in the above example to see that
four identical message were produced, two were dropped.
ToDo: Evaluate multiple streams of duplicate messages.
Bug: 30118730
Change-Id: I31dcda7c8c42edfc7a8f1bf4d9e46284c74b3d18
A single space character in search terms separates us from a denial of
service attack that forces the device into safe mode. This CL adds a
comment that hopefully stops the spaces from being accidentally deleted
in future.
Change-Id: I33b2632ef4211fa1688ac9c8f0cf7d0c667766c1
external/sepolicy commit bca98efa575bedab68f2d5eaee2cd1fd1741962b
ensures that no permissive domains can be on user builds, and
external/sepolicy commit 3872ee396898fcb23bdc49c37fd02d81014aaa5f
re-enables enforcing mode on cameraserver.
The conditions which lead to the integrity failure detection
triggering can no longer occur. Revert the patch which relaxed
the detection.
This reverts commit 33ee84f871.
Bug: 27313768
Bug: 26902605
Change-Id: I8ee97d0858345695f9df8240de4e696f4a9ba008
Only trigger an integrity failure if a policy is reloaded or
SELinux is disabled. Don't trigger the integrity failure if
we see a permissive=1 denial, which could occur if an SELinux
domain is in permissive mode.
Bug: 27313768
Bug: 26902605
Change-Id: Ib85a2799eb6378ae8acdb965b1812d691183fdd3
(cherry pick from commit 2ad0bd0a9b)
LogReader.h needs to be individually importable.
Fix a few others, drop includes of local includes, let them be
included in source instead and allow headers to be included
alphabetically. Was not a complete audit since goal was to
separate LogReader.h out from the pack.
Bug: 27242723
Change-Id: Ic7759ef90995e5bd285810706af33550c73cf5b5
LogReader.h needs to be individually importable.
Fix a few others, drop includes of local includes, let them be
included in source instead and allow headers to be included
alphabetically. Was not a complete audit since goal was to
separate LogReader.h out from the pack.
Bug: 27242723
Change-Id: Ic7759ef90995e5bd285810706af33550c73cf5b5
If a SELinux policy change or a switch to permissive mode is detected
on a user build, restart the device into safe mode, and keep it there
until an OTA is applied or user data is wiped.
This change deprecates the ro.logd.auditd property.
Needs matching changes from
I781c3059ea8d4fb2f0c923e4488b1932d69678d3
Ica825cf2af74f5624cf4091544bd24bb5482dbe7
Id3ca7889ede30b54b7af73dd50653ca1a20d59aa
Bug: 26902605
Change-Id: Idcdc5bff133f13c1267f0ec0a75cc8cf1ddbda0d
(cherry picked from commit d122ee65b6)
If a SELinux policy change or a switch to permissive mode is detected
on a user build, restart the device into safe mode, and keep it there
until an OTA is applied or user data is wiped.
This change deprecates the ro.logd.auditd property.
Needs matching changes from
I781c3059ea8d4fb2f0c923e4488b1932d69678d3
Ica825cf2af74f5624cf4091544bd24bb5482dbe7
Id3ca7889ede30b54b7af73dd50653ca1a20d59aa
Bug: 26902605
Change-Id: Idcdc5bff133f13c1267f0ec0a75cc8cf1ddbda0d
if ro.logd.timestamp or persist.logd.timestamp are set to the value
monotonic then liblog writer, liblog printing and logd all switch to
recording/printing monotonic time rather than realtime. If reinit
detects a change for presist.logd.timestamp, correct the older entry
timestamps in place.
ToDo: A corner case condition where new log entries in monotonic time
occur before logd reinit detects persist.logd.timestamp, there
will be a few out-of-order entries, but with accurate
timestamps. This problem does not happen for ro.logd.timestamp
as it is set before logd starts.
NB: This offers a nano second time accuracy on all log entries
that may be more suitable for merging with other system
activities, such as systrace, that also use monotonic time. This
feature is for debugging.
Bug: 23668800
Change-Id: Iee6dab7140061b1a6627254921411f61b01aa5c2
Simplify table generation by placing the line and header formatting
into each type's (UID, PID, TID) object. Switch to const return
values for the ownership passing functions (*ToName() functions
and methods). Use longer variable names to reduce confusion.
Switch from LINES To NUM for pruned column as that more accurately
reflects what is dropped since one entry can contain several lines.
Bug: 22855208
Change-Id: Ib110dce98a68cf5f844eb30f8a192a1f691eeba2
Discovered that we had a few libc hotspots. Adjust code to generally
reduce or nullify the number of calls to malloc, free, strlen,
strcmp, strncmp, memcmp & strncasecmp. Total gain looks to be about
3% of logd's processing time. malloc still contributes to 3%, but all
others are now total 0.5%.
Bug: 23685592
Change-Id: Ife721121667969260cdb8b055524ae90f5911278
Switch to using string and length in all transactions, treating
trailing nuls the same as spaces.
ToDo: change dumpstate (bugreport) to use logcat -b printable _regardless_
Bug: 23517551
Change-Id: I42162365e6bf8ed79d356e7b689a673902116fdb
Quick low-risk to resolve possible hash table corruption.
Resolved an unlikely path memory leak.
ToDo: replace lock with nested lock so no lock
helpers are required.
Bug: 22068332
Change-Id: I303ab06608502c7d61d42f111a9c43366f184d0c
- Add a klogd to collect the kernel logs and place them into a
new kernel log buffer
- Parse priority, tag and message from the kernel log messages.
- Turn off pruning for worst UID for the kernel log buffer
- Sniff for 'PM: suspend exit', 'PM: suspend enter' and
'Suspended for' messages and correct the internal definition
time correction against monotonic dynamically.
- Discern if we have monotonic or real time (delineation 1980) in
audit messages.
- perform appropriate math to correct the timestamp to be real time
- filter out any external sources of kernel logging
Change-Id: I8d4c7c5ac19f1f3218079ee3a05a50e2ca55f60d
Add a return value for the ::log() methods, this allows
us to optimize the wakeup for the readers to only occur
when the log message is actually placed.
This is for a future where we may dedupe identical log
messages, filter out log messages, and certainly if we
filter the messages out with an internal logd check of
__android_log_is_loggable().
Change-Id: I763b2a7c29502ab7fa0a5d5022c7b60244fcfde4
C (but not C++) has a concept of a flexible array member, which
is documented at https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html .
Using a flexible array member indicates that the structure is
really a header for a variable length object.
In logd's case, the variable length structure android_event_string_t
was embedded within another structure called
android_log_event_string_t. This makes gcc's __builtin_object_size()
function really confused. When compiling with C++,
__builtin_object_size(android_log_event_string_t.payload.data, 1)
would return 0, whereas if you compiled the code with C, the same
call would (properly) return -1.
Code which does automatic bounds checking, such as the proposed
patch at https://android-review.googlesource.com/145411 , will
cause problems for logd if this syntax is used.
Don't try to embed a variable length structure within another
structure. This doesn't appear to be valid C nor C++, and
while it's worked, it seems problematic.
Instead, inline the structure so it's one big happy structure.
Change-Id: I8ac02b7142a4f6560f5f80df2effcf720f9896fc
- logDmesg method consumes considerable memory
resources (typically 128KB depending on kernel)
- In the future (eg: klogd, syslogd) there may be need to
feed multiple logs or threads with the retrieved data.
- By moving the actions of logDmesg into the mainline that
instantiates the thread objects, we can leverage a single
allocation of the the kernel log allocation.
- logDmesg (private) is replaced with log (public) which
has a more useful and descriptive purpose for the class.
Change-Id: Ie2dd0370661493c1e596a7e486904a0e8caab9ff
Impose a limit of 20 selinux denials per second. Denials beyond
that point don't add any value, and have the potential to cause
crashes or denial of service attacks.
Do some other misc cleanup while I'm here.
Bug: 18341932
Change-Id: I6125d629ae4d6ae131d2e53bfa41e1f50277d402
- auditd spawn log copy to events and main
- logcat delete events as one of the default logs
- debuggerd do not collect events.
- squish multiple spaces
- switch from strcpy to memmove for overlapping buffers
BUG: 14626551
Change-Id: I89b30273ce931ed2b25a53ea9be48e77f4c1bbf4
- auditd switch to recording logs to events log id
- logcat add events as one of the default logs
- debuggerd collect events log as well.
ToDo: debuggerd & bugreport collect intermixed logs.
BUG: 14626551
Change-Id: I958f0e729b7596748be57488a38824db5645be7b
- permits easier determination of logd thread at
fault in a stack trace from debuggerd.
Bug: 14275676
Change-Id: Iac2c523147e2bcce34ab7ddcecd02582c5fa7cc0
