These can be AIDL or HIDL interfaces. Avoiding assuming the format here.
Bug: 141008902
Test: vts_ibase_test
Change-Id: If60367e3a46c74a1d28548379655f5e211f58b73
Instead they will be logged from system_server. This CL just prepares
grounds for logging CL to land.
Test: adb reboot userspace
Bug: 148767783
Change-Id: Ie9482ef735344ecfb0de8a37785d314a3c0417ff
fmtlib provides compile time checking of format strings that we're not
currently using. This change makes Errorf() and ErrnoErrorf() into
macros such that we can take advantage of this capability.
Test: build successfully normally
Test: fail the build if using an invalid format string
Change-Id: Icb8ba8cb973bbd1fa4755a62e7598bdbb0113757
Avb keys used to verify a partition are stored in the first-stage
ramdisk. However, after /system is mounted, init will chroot into it.
This makes those keys inaccessible for later mounts, e.g., /vendor or
/product.
This change retains avb keys by reading all of them before chroot
into /system.
Note that it is intentional to perform public matching for both
preload_avb_key_blobs and fstab_entry.avb_keys in libfs_avb.
As some keys might only be availble before init chroots into /system,
e.g., /avb/key1 in the first-stage ramdisk, while other keys might
only be available after the chroot, e.g., /system/etc/avb/key2.
Bug: 147585411
Test: specify avb_keys for a partition and checks the keys are preloaded
Test: atest libfs_avb_test
Test: atest libfs_avb_internal_test
Change-Id: I6bd490c4215480db2937cdfc3fea0d616e224a91
These operators were included because they're present in the draft
standard proposal of std::expected, but they were deemed to lead to
bugs, particularly when T is implicitly convertible to bool.
Change-Id: Ib149decf1f230198f358dc1ae0eaed71961363f6
Test: m
We currently do not handle process actions (restarting services or
exiting timedout services) when we are waiting for an exec service,
but this seems to be the wrong behavior. Particularly, an exec
service may depend on a previously started service and if that service
crashes, we will deadlock unless init restarts it.
Bug: 146920034
Test: build, boot
Change-Id: Id2fc936b8a7b989862ba4c32c398a544941e0e76
Currently, this is only enabled for Virtual A/B devices. When /data uses
F2FS, then proper pinning support must be enabled.
Because /data cannot be mounted in recovery, we can't delete the scratch
image backed by /data while in fastbootd. Instead, we mark it as
disabled in /metadata. The remount command now has an init script that
checks for and removes a disabled scratch partition.
Bug: 134949511
Test: adb remount on V A/B device with patched F2FS
Change-Id: Ifc8720378259654472d3822e97059b6c366f601d
Also reset some more properties to make bootanimation work properly.
Test: adb reboot userspace
Bug: 148172262
Change-Id: I0154d4fe9377c019150f5b1a709c406925db584d
mkdir always returns -1 for any types of errors.
errno should be checked for actual error type.
Test: m
Change-Id: I1b56d48ba48992a2f9629dc09d795c277b5b774d
This gives search (x) permission on the parent apex data
directory /data/misc/apexdata so that directories below it
may be opened. It also gives that permission on the apex
data directories themselves.
Bug: 147848983
Test: Build & flash, check perms are correct
Change-Id: I27c4ea01602002c89d0771a144265e3879d9041a
Historically, the syscall was controlled by a system-wide
perf_event_paranoid sysctl, which is not flexible enough to allow only
specific processes to use the syscall. However, SELinux support for the
syscall has been upstreamed recently[1] (and is being backported to
Android R release common kernels).
[1] da97e18458
As the presence of these hooks is not guaranteed on all Android R
platforms (since we support upgrades while keeping an older kernel), we
need to test for the feature dynamically. The LSM hooks themselves have
no way of being detected directly, so we instead test for their effects,
so we perform several syscalls, and look for a specific success/failure
combination, corresponding to the platform's SELinux policy.
If hooks are detected, perf_event_paranoid is set to -1 (unrestricted),
as the SELinux policy is then sufficient to control access.
This is done within init for several reasons:
* CAP_SYS_ADMIN side-steps perf_event_paranoid, so the tests can be done
if non-root users aren't allowed to use the syscall (the default).
* init is already the setter of the paranoid value (see init.rc), which
is also a privileged operation.
* the test itself is simple (couple of syscalls), so having a dedicated
test binary/domain felt excessive.
I decided to go through a new sysprop (set by a builtin test in
second-stage init), and keeping the actuation in init.rc. We can change
it to an immediate write to the paranoid value if a use-case comes up
that requires the decision to be made earlier in the init sequence.
Bug: 137092007
Change-Id: Ib13a31fee896f17a28910d993df57168a83a4b3d
In case one of the cryptfs calls to vdc fails, first try a normal
reboot.
Test: manual
Bug: 135984674
Bug: 143970043
Change-Id: I5706d9cd6c3a08fa06329ffb7d141de632620e3d
Scoped storage has some unique requirements that are hard to implement
with the two mount namespaces, because the daemon that does the mounting
(vold) lives in a different namespace than the processes using those
mounts.
In particular, /mnt/installer is a special bind mount that should
receive mount events under /mnt/user, but at the same time only
only propagate mount events under /mnt/installer to /mnt/installer in
the other namespace. More details in the code.
Bug: 134706060
Test: /mnt/installer shows up and is setup correctly.
Change-Id: I6dab5ace5a345d9d684a9f1ae94c833fc294d49e
* Open the ImageManager according to the saved DSU slot.
* Load the saved install_dir when it presents. This is required
when installing to an external storage and the current code
seems to break it.
* Remove an unnecessary C++ using.
Test: gsi_tool install
Bug: 144247097
Change-Id: I5b7be25787f235518a25abacefa612c33861f6ef
While handling the fatal signals and abort, exits from the signal
handler to panic the system if "androidboot.init_fatal_panic" in cmdline
is configured as "true".
Bug: 146818493
Change-Id: I59fffb7598ce981383ae24961a97fd2fd8e8d64e
Commit Ida1a6da988c10d364b3ccdaa6c5d63e5264d1b27 allows specifying
AVB-related partitions to be probed in first-state mount, e.g.,
"avb=vbmeta_system" in the fs_mgr_flags will make init wait uevents
for vbmeta_system partition, which is required for AVB verification.
However, when specifying "avb=dtbo" to chain a /dtbo partition, first-stage
init will emit the following error as it assumes all partitions are
verified by Hashtree descriptors.
init: [libfs_avb]Hashtree descriptor not found: dtbo
This change fixes this by skipping raw partitions for first-stage mounting,
where raw partitions should already be verified by bootloader with Hash
descriptors. Although first-stage init does not perform Hash verification,
it still reads all Hash/Hashtree descriptors to calculate then compare
the "VBMeta Digest" passed from bootloader.
https://android.googlesource.com/platform/external/avb/#The-VBMeta-Digest
The following is an example of a fstab entry to chain /dtbo partition:
/dev/block/bootdevice/by-name/dtbo /dtbo emmc defaults slotselect,avb=dtbo,first_stage_mount
Bug: 146935233
Test: enable /dtbo as a chain partition, then boot the device
Change-Id: I590f1d9b78ef89b5aef21cb7bf19fdb90b27f808
Marks this CTS test module as supporting secondary_user, meaning that
the tests are eligible to be run from a regular Android user other
than the system user (i.e. other than user 0).
Note that 'user' here refers to the concept of users in Android
Multiuser; it is NOT the same as a uid.
Bug: 141773058
Test: module passed with secondary_user params
(--enable-optional-parameterization --module-parameter secondary_user)
Change-Id: Ic8d29cabe2542d75c8f873b677550db9f11b3050
The apex data directories must be accessed by apexd in order for it to
perform snapshot and restore as part of the rollback process. As apexd
runs as root, this CL changes the apex data directories under /data/misc
to be owned by root.
Bug: 141148175
Test: Build and flash; check permissions are set correctly.
Change-Id: Ib534e705802c06900884a15f39fee257d4987f4c
When BCB (bootloader message structure inside of misc partition) is
malformed (contains some non-printable characters in its fields),
"reboot recovery" command won't be able to write required string to
"command" field. It can happen for example when partition table was
created anew and 'misc' partition area contains some garbage. Also this
behavior can be emulated with this command:
$ fastboot erase misc
which leads to 'misc' partition to be filled with 0xFF characters. Hence
this code:
if (boot.command[0] == '\0') {
won't let us to set new string to "command" field. Let's check if
"command" field is malformed and fix it, before actually checking for
previously set content.
"fastboot erase" shouldn't be used for testing purposes though, as it
doesn't work sometimes due to alignment, on bootloader side:
Erasing blocks 6144 to 6144 due to alignment
........ erased 0 bytes from 'misc'
Instead one might use "dd" command to fill 'misc' with 0xFF's:
$ dd if=/dev/zero ibs=2k count=1 | tr "\000" "\377" >misc.img
$ fastboot flash misc misc.img
Test: Fill 'misc' partition with 0xFF's, then do "adb reboot recovery"
Change-Id: Ica8ca31012b9b2249645e7305830c07a20dd013c
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Current linkerconfig targets for specific output file. However,
linkerconfig will generate more than 1 file based on APEX modules, so it
should take argument for target directory rather than target file. This
change updates linkerconfig's argument to point output directory.
Bug: 146993126
Test: m -j passed & Cuttlefish succeeded to boot
Change-Id: I3a720a047077688582436aabd307adafeafc5398
Since I was there, added two more properties to reset, and switched
ordering of sys.init.updatable_crashing and
sys.init.updatable_crashing_process_name setprops to make sure that
process name is already set when apexd/PackageWatchdog get's notified
about sys.init.updatable_crashing.
Also fixed a typo in what HandleUserspaceReboot function.
Test: adb reboot userspace
Bug: 135984674
Change-Id: I954ec49aae0734cda1bd833ad68f386ecd808f73
There are two namespaces from init - bootstrap and default - and those
will have different set of APEX modules. To support difference between
two namespaces, linker config should be generated per namespace and each
namespace should use its own linker configuration. As a first step of
the work, this change will create different mount point for each
namespace, and re-generate linker config after APEX mount from each
namespaces.
Bug: 144664390
Test: m -j passed & tested from cuttlefish
Change-Id: Iac2e222376ec4b0ced6c29eed18b21d39ff0b1ba
The first_stage_mount code for DSUs predates both the DSU name and the
ImageManager abstraction. Move this code to ImageManager, so it can be
shared with overlayfs/scratch handling. And while we're here, rename GSI
to DSU for clarity.
Bug: 134949511
Test: dsu works
Change-Id: I9ef374bccc6cdbe2ada88baef4e7c0bc81b1e85e
