Removing restorecon on root sepolicy files because:
1. Under normal boot the files are properly labeled when creating the
image. Restorecon'ing them successfully would require "adb remount".
2. These restorecon's are not required for recovery to function.
Fixes: 122535196
Test: boot blueline
Change-Id: I20b127e950b16535d4bfa9fd4e626e11228925e7
The first split of 1st/2nd stage init went a bit overboard, since it
split these even in the case of the recovery image and system-as-root,
which don't actually need the split. This change simplifies this a
bit:
system-as-root and recovery have a single combined /system/bin/init
and a symlink from /init to it.
non-system-as-root has a separate first stage init at /init on the
first stage ramdisk and a combined /system/bin/init on system.img.
Two particular benefits from this:
1) Removal of the rsync of TARGET_RAMDISK_OUT to the recovery image
2) Decrease of overall space on the recovery image since it won't have
a statically linked first stage init
This also unified the various entry points of init to depend entirely
on the arguments passed to it, instead of the hybrid of arguments and
environment variable used previously.
Bug: 80395578
Test: boot both system-as-root and non-system-as-root
Change-Id: Ic2f29b6f56b7defc80eaa0e7cd0c9107e978816f
We're moving past a world where static executables are needed,
including watchdogd, so treat this like any other executable and place
it in /system/bin.
Bug: 73660730
Test: watchdogd still runs
Change-Id: I1f7508fd55dce6e9ee72a6ab7a085011a76c0053
Clean up a few mistakes in logging initialization
1) Only init needs to clear stdout/stderr/stdin, so remove this from
ueventd, watchdogd, and subcontext init
2) Only init should reboot due to FATAL errors. This was true even
before this change due to getpid() checks, but there's no reason to
not just use the DefaultAborter for other processes.
3) It's probably a mistake for FATAL logs in init to try to gracefully
shutdown the system, so simply call RebootSystem() here.
4) Lastly, remove log.cpp since it's not actually shared code anymore
Test: build
Change-Id: Ic8c323393dc7ee98ed6bb9691361b51d0d915267
This commit uses vendor sepolicy file version (defined in
`/vendor/etc/selinux/plat_sepolicy_vers.txt`) to determine whether the
source context should be set as `u:r:vendor_init:s0`.
Before this commit, the criterion was `ro.vndk.version` >= 28. However,
the check in `property_service.cpp` will always be true because
`ro.vndk.version` hasn't been loaded from `/vendor/default.prop`.
Furthermore, under some circumstances, `ro.vndk.version` may be
different from `plat_sepolicy_vers.txt` (e.g. O-MR1 vendor does not
define `ro.vndk.version`).
Bug: 78605339 # high-level bug to combine O-MR1 and P GSI
Bug: 79135481 # the usage of `ro.vndk.version` in init
Test: vts-tradefed run vts -m VtsTrebleVintfTest # tetheroffload
Change-Id: Ied46e9346b4ca7931aa4dcf1c9dbc11de0e12d93
Also fallbacks to nonplat_* if it doesn't exists.
Bug: 64240127
Bug: 70279378
Test: boot bullhead and sailfish
Change-Id: I372b42a3c559ae0f9602163699eaef4df148467b
The content of nonplat_declaration.cil in /vendor is a versioned public
sepolicy exported from ${AOSP}/system/sepolicy/public. Renames it to
better reflect the fact.
Bug: 64240127
Test: boot sailfish normally without odm
Test: boot another device having odm
Change-Id: I654f5bbde2f2d666a2a5c7ed8561ccd93c983a6e
See https://lkml.org/lkml/2005/9/10/129 for details.
Bug: 20501816
Test: code compiles and boots with no obvious problems.
Change-Id: I5a9c470156d498852cfd81fbd59ddcf267309e73
Allows partners to add a new attribute definition to their public
policy without causing a compatibility failure with the AOSP system
image.
Bug: 67092827
Bug: 37915794
Test: build and boot aosp_sailfish with a new type declared in public
policy.
Change-Id: I3899065affb6806ae9080e1a7dfa5a6f368370f0
init: support loading odm sepolicy
Currently init merges two sepolicy cil files:
- /system/etc/selinux/plat_sepolicy.cil
- /vendor/etc/selinux/nonplat_sepolicy.cil
This change replaces nonplat_sepolicy.cil with the following two files:
- /vendor/etc/selinux/declaration/nonplat_declaration.cil
- /vendor/etc/selinux/vender_sepolicy.cil
And support merging another default (but optional):
- /odm/etc/selinux/odm_sepolicy.cil.
Bug: 64240127
Test: boot sailfish normally without odm.cil
Test: boot another device having odm.cil
Change-Id: I0b7f8c656c73ddb0fd46f2af3c625d7c81566f2f
Init keep its own copy of the environment that it uses for execve when
starting services. This is unnecessary however as libc already has
functions that mutate the environment and the environment that init
uses is clean for starting services. This change removes init's copy
of the environment and uses the libc functions instead.
This also makes small clean-up to the way the Service class stores
service specific environment variables.
Test: boot bullhead
Change-Id: I7c98a0b7aac9fa8f195ae33bd6a7515bb56faf78
Bug: 64848081
Test: built and successfully booted again
Merged-In: I93c899249bf2cc5ab8d880c0eaff471518e73121
Change-Id: I93c899249bf2cc5ab8d880c0eaff471518e73121
Test: boot bullhead
Test: Introduce LOG(FATAL) at various points of init and ensure that
it reboots to the bootloader successfully
Test: Introduce LOG(FATAL) during DoReboot() and ensure that it reboots
instead of recursing infinitely
Test: Ensure that fatal signals reboot to bootloader
Change-Id: I409005b6fab379df2d635e3e33d2df48a1a97df3
init tries to propagate error information up to build context before
logging errors. This is a good thing, however too often init has the
overly verbose paradigm for error handling, below:
bool CalculateResult(const T& input, U* output, std::string* err)
bool CalculateAndUseResult(const T& input, std::string* err) {
U output;
std::string calculate_result_err;
if (!CalculateResult(input, &output, &calculate_result_err)) {
*err = "CalculateResult " + input + " failed: " +
calculate_result_err;
return false;
}
UseResult(output);
return true;
}
Even more common are functions that return only true/false but also
require passing a std::string* err in order to see the error message.
This change introduces a Result<T> that is use to either hold a
successful return value of type T or to hold an error message as a
std::string. If the functional only returns success or a failure with
an error message, Result<Success> may be used. The classes Error and
ErrnoError are used to indicate a failed Result<T>.
A successful Result<T> is constructed implicitly from any type that
can be implicitly converted to T or from the constructor arguments for
T. This allows you to return a type T directly from a function that
returns Result<T>.
Error and ErrnoError are used to construct a Result<T> has
failed. Each of these classes take an ostream as an input and are
implicitly cast to a Result<T> containing that failure. ErrnoError()
additionally appends ": " + strerror(errno) to the end of the failure
string to aid in interacting with C APIs.
The end result is that the above code snippet is turned into the much
clearer example below:
Result<U> CalculateResult(const T& input);
Result<Success> CalculateAndUseResult(const T& input) {
auto output = CalculateResult(input);
if (!output) {
return Error() << "CalculateResult " << input << " failed: "
<< output.error();
}
UseResult(*output);
return Success();
}
This change also makes this conversion for some of the util.cpp
functions that used the old paradigm.
Test: boot bullhead, init unit tests
Merged-In: I1e7d3a8820a79362245041251057fbeed2f7979b
Change-Id: I1e7d3a8820a79362245041251057fbeed2f7979b
This change splits out the selinux initialization and supporting
functionality into selinux.cpp and splits the security related
initialization of the rng, etc to security.cpp. It also provides
additional documentation for SEPolicy loading as this has been
requested by some teams.
It additionally cleans up sehandle and sehandle_prop. The former is
static within selinux.cpp and new wrapper functions are created around
selabel_lookup*() to better serve the users. The latter is moved to
property_service.cpp as it is isolated to that file for its usage.
Test: boot bullhead
Merged-In: Idc95d493cebc681fbe686b5160502f36af149f60
Change-Id: Idc95d493cebc681fbe686b5160502f36af149f60
(cherry picked from commit 9afb86b25d8675927cb37c86119a7ecf19f74819)
init tries to propagate error information up to build context before
logging errors. This is a good thing, however too often init has the
overly verbose paradigm for error handling, below:
bool CalculateResult(const T& input, U* output, std::string* err)
bool CalculateAndUseResult(const T& input, std::string* err) {
U output;
std::string calculate_result_err;
if (!CalculateResult(input, &output, &calculate_result_err)) {
*err = "CalculateResult " + input + " failed: " +
calculate_result_err;
return false;
}
UseResult(output);
return true;
}
Even more common are functions that return only true/false but also
require passing a std::string* err in order to see the error message.
This change introduces a Result<T> that is use to either hold a
successful return value of type T or to hold an error message as a
std::string. If the functional only returns success or a failure with
an error message, Result<Success> may be used. The classes Error and
ErrnoError are used to indicate a failed Result<T>.
A successful Result<T> is constructed implicitly from any type that
can be implicitly converted to T or from the constructor arguments for
T. This allows you to return a type T directly from a function that
returns Result<T>.
Error and ErrnoError are used to construct a Result<T> has
failed. Each of these classes take an ostream as an input and are
implicitly cast to a Result<T> containing that failure. ErrnoError()
additionally appends ": " + strerror(errno) to the end of the failure
string to aid in interacting with C APIs.
The end result is that the above code snippet is turned into the much
clearer example below:
Result<U> CalculateResult(const T& input);
Result<Success> CalculateAndUseResult(const T& input) {
auto output = CalculateResult(input);
if (!output) {
return Error() << "CalculateResult " << input << " failed: "
<< output.error();
}
UseResult(*output);
return Success();
}
This change also makes this conversion for some of the util.cpp
functions that used the old paradigm.
Test: boot bullhead, init unit tests
Change-Id: I1e7d3a8820a79362245041251057fbeed2f7979b
This change splits out the selinux initialization and supporting
functionality into selinux.cpp and splits the security related
initialization of the rng, etc to security.cpp. It also provides
additional documentation for SEPolicy loading as this has been
requested by some teams.
It additionally cleans up sehandle and sehandle_prop. The former is
static within selinux.cpp and new wrapper functions are created around
selabel_lookup*() to better serve the users. The latter is moved to
property_service.cpp as it is isolated to that file for its usage.
Test: boot bullhead
Merged-In: Idc95d493cebc681fbe686b5160502f36af149f60
Change-Id: Idc95d493cebc681fbe686b5160502f36af149f60
This change splits out the selinux initialization and supporting
functionality into selinux.cpp and splits the security related
initialization of the rng, etc to security.cpp. It also provides
additional documentation for SEPolicy loading as this has been
requested by some teams.
It additionally cleans up sehandle and sehandle_prop. The former is
static within selinux.cpp and new wrapper functions are created around
selabel_lookup*() to better serve the users. The latter is moved to
property_service.cpp as it is isolated to that file for its usage.
Test: boot bullhead
Merged-In: Idc95d493cebc681fbe686b5160502f36af149f60
Change-Id: Idc95d493cebc681fbe686b5160502f36af149f60
(cherry picked from commit 9afb86b25d8675927cb37c86119a7ecf19f74819)
This change splits out the selinux initialization and supporting
functionality into selinux.cpp and splits the security related
initialization of the rng, etc to security.cpp. It also provides
additional documentation for SEPolicy loading as this has been
requested by some teams.
It additionally cleans up sehandle and sehandle_prop. The former is
static within selinux.cpp and new wrapper functions are created around
selabel_lookup*() to better serve the users. The latter is moved to
property_service.cpp as it is isolated to that file for its usage.
Test: boot bullhead
Merged-In: Idc95d493cebc681fbe686b5160502f36af149f60
Change-Id: Idc95d493cebc681fbe686b5160502f36af149f60
(cherry picked from commit 9afb86b25d8675927cb37c86119a7ecf19f74819)
