Add a property ro.boottime.init.first_stage to provide us a
first stage init duration from start to exec completed in
nanoseconds.
For consistency, report nanoseconds duration for
ro.boottime.init.selinux as well instead of milliseconds.
Now also report consistently from start to exec completed
instead of just the selinux load time.
SideEffects: ro.boottime.init.selinux is reported to TRON and
may alarm with the millionfold increase in precision.
ro.boottime.init is now also consistent with ns
precision.
Test: inspect
Bug: 124491153
Bug: 129780532
Change-Id: Iff4f1a3a1ab7ff0a309c278724c92da0832b9a69
In previous implementation, userdebug sepoilcy and property files are
loaded from the system.img. This CL changes this to:
- first-stage init copies userdebug files from ramdisk to /debug_ramisk/*
- second-stage init loads files from /debug_ramdisk/*.
Note: same as before, the above can only be triggered, if the device
is UNLOCKED
With this, we don't have to put userdebug related files into the USER
system.img.
Bug: 126493225
Test: boot device with a ramdisk with /force_debuggable, checks related
files are loaded
Change-Id: I63f5f846e82ba78427062bf7615c26173878d8f3
right now vendor_init is forked before we set oom_adj for init which
leaves a chance vendor_init could be killed in heavy memory pressure.
this CL set the oom_adj before forking everything to ensure all native
have correct oom_adj settings.
Fixes: 130824864
Test: procrank -o
Change-Id: I8af129076c3efa29f7b781459449f8f2dc853c98
Only init uses SetupCgroups. This functionality is
moved from libprocessgroup to its own library, and only
init links to it.
Also, merge CgroupSetupCgroups() with CgroupMap::SetupCgroups()
because the former is just an alias of the latter, and
CgroupMap does not belong to libcgrouprc_setup.
Test: boots
Bug: 123664216
Change-Id: I941dc0c415e2b22ae663d43e30dc7a464687325e
Merged-In: I941dc0c415e2b22ae663d43e30dc7a464687325e
SetupCgroups is called by init process during early-init stage and is not
supposed to be called again by anyone else. Ensure that the caller is the
init process, make sure cgroup.rc file is written only one time, keep the
file descriptor to cgroup.rc file open by the init process to ensure all
its further mappings stay valid even if the file is deleted.
Bug: 124774415
Test: build, run, verify no errors or warning in the logcat
Change-Id: Ib8822cf0112db7744e28d442182d54dcf06f46f2
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Set properties dev.mnt.blk.<mount_point>=<device_block_class> for mount
and umount operations by setting up an Epoll handler to catch
EPOLLERR or EPOLLPRI signals when /proc/mounts is changed. Only
update properties associated with block devices. For the mount
point of /, use the designation of /root instead.
Can use the properties in init rc expansion like:
on property dev.mnt.blk.root=*
write /sys/block/${dev.mnt.blk.root}/queue/read_ahead_kb ${boot_read_ahead_kb:-2048}
on property dev.mnt.blk.data=*
write /sys/block/${dev.mnt.blk.data}/queue/read_ahead_kb ${boot_read_ahead_kb:-2048}
on late-fs
setprop boot_read_ahead_kb 128
write /sys/block/${dev.mnt.blk.root}/queue/read_ahead_kb ${boot_read_ahead_kb}
write /sys/block/${dev.mnt.blk.data}/queue/read_ahead_kb ${boot_read_ahead_kb}
Test: boot and inspect getprop results.
Bug: 124072565
Change-Id: I1b8aff44f922ba372cd926de2919c215c40ee874
When init found "/force_debuggable" in the first-stage ramdisk, it will
do the following if the device is unlocked:
1. load /system/etc/adb_debug.prop (with ro.debuggable=1)
2 .load userdebug_plat_sepolicy.cil instead of original plat_sepolicy.cil from
/system/etc/selinux/.
This make it possible to run VTS on a USER build GSI, by using a special
ramdisk containing "/force_debuggable".
Bug: 126493225
Test: unlock a USER build device, check 'adb root' can work
Change-Id: I9b4317bac1ce92f2c0baa67c83d4b12deba62c92
Abstract usage of cgroups into task profiles that allows for changes
in cgroup hierarchy and version without affecting framework codebase.
Rework current processgroup and sched_policy API function implementations
to use task profiles instead of hardcoded paths and attributes.
Mount cgroups using information from cgroups.json rather than from init.rc
Exempt-From-Owner-Approval: already approved in internal master
Bug: 111307099
Test: builds, boots
Change-Id: If5532d6dc570add825cebd5b5148e00c7d688e32
Merged-In: If5532d6dc570add825cebd5b5148e00c7d688e32
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
This CL fixes the design problem of the previous mechanism for providing
the bootstrap bionic and the runtime bionic to the same path.
Previously, bootstrap bionic was self-bind-mounted; i.e.
/system/bin/libc.so is bind-mounted to itself. And the runtime bionic
was bind-mounted on top of the bootstrap bionic. This has not only caused
problems like `adb sync` not working(b/122737045), but also is quite
difficult to understand due to the double-and-self mounting.
This is the new design:
Most importantly, these four are all distinct:
1) bootstrap bionic (/system/lib/bootstrap/libc.so)
2) runtime bionic (/apex/com.android.runtime/lib/bionic/libc.so)
3) mount point for 1) and 2) (/bionic/lib/libc.so)
4) symlink for 3) (/system/lib/libc.so -> /bionic/lib/libc.so)
Inside the mount namespace of the pre-apexd processes, 1) is
bind-mounted to 3). Likewise, inside the mount namespace of the
post-apexd processes, 2) is bind-mounted to 3). In other words, there is
no self-mount, and no double-mount.
Another change is that mount points are under /bionic and the legacy
paths become symlinks to the mount points. This is to make sure that
there is no bind mounts under /system, which is breaking some apps.
Finally, code for creating mount namespaces, mounting bionic, etc are
refactored to mount_namespace.cpp
Bug: 120266448
Bug: 123275379
Test: m, device boots, adb sync/push/pull works,
especially with following paths:
/bionic/lib64/libc.so
/bionic/bin/linker64
/system/lib64/bootstrap/libc.so
/system/bin/bootstrap/linker64
Change-Id: Icdfbdcc1efca540ac854d4df79e07ee61fca559f
Before, this process had no threadpool, so it could make blocking
calls, but if it did, they would block forever. Now when this
happens, an error is logged so that we can easily see this happen.
Bug: 36424585
Test: boot
Change-Id: I7d2fa12b6d5a243bdde13ce4d974a444133749f7
NIAP certification requires that all cryptographic functions
undergo a self-test during startup to demonstrate correct
operation. This change adds such a check.
If the check fails, it will prevent the device from booting
by rebooting into the bootloader.
Bug: 119826244
Test: Built for walleye. After device booted examined dmesg and
observed logs from init showing that the new task did
start. Further, when BoringSSL is built to fail its self
check the device did stop during a normal boot and enter
the bootloader, and did so before the boot animation stopped.
Change-Id: I07a5dc73a314502c87de566bb26f4d73499d2675
The first split of 1st/2nd stage init went a bit overboard, since it
split these even in the case of the recovery image and system-as-root,
which don't actually need the split. This change simplifies this a
bit:
system-as-root and recovery have a single combined /system/bin/init
and a symlink from /init to it.
non-system-as-root has a separate first stage init at /init on the
first stage ramdisk and a combined /system/bin/init on system.img.
Two particular benefits from this:
1) Removal of the rsync of TARGET_RAMDISK_OUT to the recovery image
2) Decrease of overall space on the recovery image since it won't have
a statically linked first stage init
This also unified the various entry points of init to depend entirely
on the arguments passed to it, instead of the hybrid of arguments and
environment variable used previously.
Bug: 80395578
Test: boot both system-as-root and non-system-as-root
Change-Id: Ic2f29b6f56b7defc80eaa0e7cd0c9107e978816f
Init now parses *.rc files from the APEXs when the apexd notifies the
mount event via apexd.status sysprop.
Bug: 117403679
Test: m apex.test; adb root; adb push <builtfile> /data/apex; adb reboot
adb root; adb shell setprop ctl.start apex.test; dmesg shows that init
tries to start the service which doesn't exist.
[ 47.979657] init: Could not ctl.start for 'apex.test': Cannot find '/apex/com.android.example.apex/bin/test': No such file or directory
Change-Id: I3f12355346eeb212eca4de85b6b73257283fa054
Using overlayfs, the system partition may provide files for older
version of vendor partitions by overlaying on the vendor partition.
Directories in /system/vendor_overlay will be overlaid on the
directories in /vendor to override existing files or provide new
files.
This feature works only if the kernel support overlayfs and has a
patch for override_creds. Otherwise, no-op.
Bug: 114679254
Test: Build and boot: nothing affected without overlayfs, or
vendor file is overrided with overlayfs
Change-Id: Iff3a308945299034123ba7bcb40dc787e102730e
Init is special.
It starts early and does not pick up the Android ASAN options provided
on the environment. Therefore we pull in /system/asan.options in
explicitly if it exists. We provide sane defaults that will allow the
system to boot otherwise.
Logging is complicated because it needs to go to the kernel log.
So use sanitizer functions to install log functions.
Bug: 117879229
Test: m && m SANITIZE_TARGET=address
Test: init boots with ASAN enabled
Change-Id: I72c033a1f86ba5d6b2e4f943e7a3acd0d399c8bf
The kernel opens /dev/console and uses that fd for stdin/stdout/stderr
if there is a serial console enabled and no initramfs, otherwise it
does not provide any fds for stdin/stdout/stderr. InitKernelLogging()
is used to close these existing fds if they exist and replace them
with /dev/null.
Currently, InitKernelLogging() is only called in second stage init,
which means that processes exec'ed from first stage init will inherit
the kernel provided fds if any are provided.
In the case that they are provided, the exec of second stage init
causes an SELinux denial as it does not have access to /dev/console.
In the case that they are not provided, exec of any further process is
potentially dangerous as the first fd's opened by that process will
take the stdin/stdout/stderr fileno's, which can cause issues if
printf(), etc is then used by that process.
Lastly, simply moving InitKernelLogging() to first stage init is not
enough, since first stage init still runs in kernel context and future
child processes will not have permissions to access kernel context
resources. Therefore, it must be done for a second time in second
stage init.
Bug: 117281017
Test: no audits when booting marlin.
Change-Id: If27edab5c32b27765e24c32fbed506ef625889de
Allow services to specify a custom restart period via the
restart_period service option. This will allow services to be run
periodically, such as a service that needs to run every hour.
Allow services to specify a timeout period via the timeout_period
service option. This will allow services to be killed after the
timeout expires if they are still running. This can be combined with
restart_period for creating period services.
Test: test app restarts every minute
Change-Id: Iad017820f9a602f9826104fb8cafc91bfb4b28d6
Device is considered to be unlocked if
androidboot.verifiedbootstate is "orange".
Test: adb shell getprop ro.boot.flash.locked
Change-Id: Id3aeec757908ea63a37e28ad880a6c71d53083ac
If there is no valid pre-compiled SEPolicy policy, init may call
secilc, which exists on the system partition. 1st stage init won't
always live on this partition, so we need to move this SELinux setup
to 2nd stage init, which always lives on the system partition, to
ensure that both secilc and its caller are updated together.
Bug: 114059212
Test: hikey boots, sailfish boots
Change-Id: Iaf7b4af4a5c2ace16755ec2e54510ab95c53f041
Allow init to use binder, but in a restricted way:
- No binder threadpool
- Other processes can't initiate calls to init
- No death recipients
This change adds libbinder/libutils and calls into ProcessState,
which also calls into the kernel driver and sets up state there.
No other binder calls are made, so that we can let this soak for
a while to see if there any bad side effects of just loading
these libraries and initializing the kernel driver.
This introduces about 120kB of additional memory usage (PSS),
mostly due to pulling in libbinder and libutils and the private
state they have.
We also don't include these libraries in the recovery version of
init, because space on the recovery partition is limited.
Bug: 112684055
Test: device still boots, /d/binder/proc/1 shows init state
Change-Id: I972b1eebdb16337f52e20d1f614e3a0dce0f06d2
Attempting to reduce the number of different spellings we have for
"product services" partition in the codebase.
Bug: 112431447
Test: m
Change-Id: I1a87d7e040a8b1f91f973ac7d90d6360b5b54f71
Merged-In: I1a87d7e040a8b1f91f973ac7d90d6360b5b54f71
In the future, systems with dm-linear will require a ramdisk to set up
the mount for system. In this world, first stage init will be a part
of this ramdisk and handle setting up dm-linear, mounting the
necessary partitions, then pivoting to the system image, which will
become the root partition.
This also enables previous devices without system-as-root, to be
unified with system-as-root devices for all aspects of boot after the
pivot_root.
Bug: 79758715
Test: boot hikey
Test: boot sailfish, boot sailfish into recovery
Change-Id: Iefa88a3ec5994e7989aa9f26f2de0351ffa5468b
This is a baseline for splitting init first and second stage into
their own executables.
Bug: 79758715
Test: sailfish boots
Change-Id: I549ad4502893b3a5e4c2a9886f66850f6d31b619
We're moving past a world where static executables are needed,
including watchdogd, so treat this like any other executable and place
it in /system/bin.
Bug: 73660730
Test: watchdogd still runs
Change-Id: I1f7508fd55dce6e9ee72a6ab7a085011a76c0053
This CL is largely and adaptation of
Ie996def20e25dc1afe0c74af2096af844934b2dc
Bug: 80741439
Test: Successfully built product-services.img with one module in it, and
flashed on device. Also successfully built image with
/system/product-services and no dedicated /product-services partition.
Change-Id: I1046dfe19bf874da929c9131b76a1f85422fbb80
Merged-In: I1046dfe19bf874da929c9131b76a1f85422fbb80
In preparation for splitting first stage init from the rest of the
init executable, rename these files which are specifically involved in
first stage mount operations to a more appropriate name.
Test: builds
Change-Id: I8a2d4e8c7e1deea1bab45cc8e738727bc2ceb3e5
Clean up a few mistakes in logging initialization
1) Only init needs to clear stdout/stderr/stdin, so remove this from
ueventd, watchdogd, and subcontext init
2) Only init should reboot due to FATAL errors. This was true even
before this change due to getpid() checks, but there's no reason to
not just use the DefaultAborter for other processes.
3) It's probably a mistake for FATAL logs in init to try to gracefully
shutdown the system, so simply call RebootSystem() here.
4) Lastly, remove log.cpp since it's not actually shared code anymore
Test: build
Change-Id: Ic8c323393dc7ee98ed6bb9691361b51d0d915267
1. init creates /mnt/product used to mount product-specific rw partitions.
2. If a device tree fstab entry for early mount specifies a mount point
under /mnt/product e.g. /mnt/product/foo, init will create
/mnt/product/foo mount point.
Bug: 110808288
Test: change dt fstab entry to mount /mnt/product/foo; mount point is
created correctly, and partition is mounted in early mount.
Change-Id: I321e314992abe1084fd67a382c205f5c0c92bf3d
This functionality is useful for improving boottimes on the ARC++
project. Without this change, ro.serialno would be set to the empty
string when androidboot.serialno was unset in the kernel commandline.
Bug: 62039211
Test: boot with androidboot.serialno unset and ensure ro.serialno is
unset
Change-Id: Iaee339dfa3f0c871e5e9c1fc0534347f2b3e8a07
Init never checked the return values of the calls made during first
stage init (since of course they're not going to fail, right?). But
of course commands can fail and they might not necessarily be obvious
when they do, so let's make it obvious.
Since the kernel log isn't up until later, this creates a list of the
failures that can then be sent to the kernel log once it's ready
(pending of course failures in setting it up...)
Test: boot bullhead, don't see errors
Change-Id: I8c12c61fa12e4368346e8b0e1c0bb0844b5d0377
Drop all references to keychord_id and id and instead use keycodes_
as the id. The keycodes are a std::vector<int> with an unique
sorted-order emplacement method added in the parser. Solves the
academic issue with duplicate keychords and trigger all services
that match rather than first match only.
Test: init_tests
Bug: 64114943
Change-Id: I5582779d81458fda393004c551c0d3c03d9471e0
Move things around so that keychords.cpp is independent of service
and init and can be individually tested with few dependencies.
Permits also rolling out the keychords as a class in a future commit.
Improve parser checking.
Test: init_tests
Bug: 64114943
Change-Id: I82570bc6269ed478db784ec38a8bc916da2be2be
