In the fallback path, if the non-main thread is the target
to be dumped, then no other threads are dumped when creating
a tombstone. Fix this and add unit tests to verify that
this all threads, including the main thread are dumped.
Bug: 234058038
Test: All unit tests pass.
Test: debuggerd -b media.swcodec process
Test: debuggerd media.swcodec process
Change-Id: Ibb75264f7b3847acdbab939a66902d986c0d0e5c
The code doesn't properly check if data is not read properly, so
make it fail if reads fail. Also, change the algorithm so that
first try and read the faulting page then 16 pages before and 16
pages after. Rather than trying to read every one of these pages,
stop as soon as one is unreadable. This means that the total memory
passed to the scudo error function is all valid data, rather than
potentially being some uninitialized memory.
Added new unit tests to cover scudo address processing.
Bug: 233720136
Test: All unit tests pass.
Test: atest CtsIncidentHostTestCases
Change-Id: I18a97bdee9a0c44075c1c31ccd1b546d10895be9
If a process requires executing fallback unwinder and the thread
crashing is not the main thread, the wrong unwinder is used.
Fix this case, and add a new unit test that causes an abort in
the non main thread.
Bug: 233721755
Test: New unit test passes with fix and fails without.
Test: Ran debuggerd on swcodec process and it still dumps all threads.
Change-Id: I70fffc5d680256ce867e7a1d427593b584259160
Merged-In: I70fffc5d680256ce867e7a1d427593b584259160
(cherry picked from commit 2d5d46ca85)
This simplifies most of the calls to avoid doing any Android
specific code.
Bug: 120606663
Test: All unit tests pass.
Change-Id: I511e637b9459a1f052a01e501b134e31d65b5fbe
With the addition of runtime-configurable GWP-ASan, there might be many,
many more than 1,000 allocations. Have support for them, but keep a
hopefully-won't-crash-the-device limit.
Bug: 219651032
Test: atest bionic-unit-tests
Change-Id: I7b8e2bf5ab7c723ab6c61365f0dc610e400dbbce
One is intentionally seeting the abort message. The other is to set
the abort message to null.
Also, make the libseccomp_policy static so that the crasher
executable can be copied to the system afterwards without
requiring libseccomp_policy.so.
Test: Ran both new crash commands on device.
Test: Ran the seccomp crash command to verify seccomp still works.
Change-Id: I255b5f37e6eb188719e5b72302ca3f5911c8d821
Inline definitions of a few constants that don't appear on Q/R devices,
so that this works for us in mainline modules that are loaded on those
older devices.
Bug: 225406881
Test: boot on Q, watch logcat
Test: boot on R, watch logcat
Change-Id: Ic5781976d4c1e2d16e230c015fc49d9fde74e289
The functionality moved from the Unwinder object to the MapInfo
object and means that the individual unreadable files can be
displayed now.
Included adding the unreadable elfs per thread in the protobuf.
Updated the unwinder test.
Test: All unit tests pass.
Change-Id: I7140bde16938736da005f926e10bbdb3dbc0f6f5
When dumping a tombstone using the fallback path, only the main
thread was showing up. Modify the code to dump the threads using
a slightly different path for the tombstone generation code.
In addition, while looking at this code, two MTE variables were
not set in the tombstone fallback code. Added those variables
so MTE devices will work properly in this fallback path.
Modified the tombstone unit tests for seccomp to have
multiple threads and verify those threads show up in the tombstone.
Bug: 208933016
Test: Ran unit tests.
Test: Ran debuggerd <PID> on a privileged process and verified
Test: all threads dumped. Also verified that the tagged_addr_ctrl
Test: variable is present on the raven device.
Change-Id: I16eadb0cc2c37a7dbc5cac16af9b5051008b5127
debuggerd_test depends on it, and the easiest way to
ensure that the file is available when running the tests
is to make it a dependency of crash_dump.
Change-Id: Iebea8e0c49d8d49d52a434e4194e870793758988
Change use of new_ to old_ to save the old sigaction data. This hasn't
caused any issues, but it's obviously wrong.
Test: Ran unit tests on coral.
Change-Id: I96be5b0980c323c3aeafb422fbc06202577604a2
Hard to get otherwise if you're trying to debug PAC issues.
Bug: http://b/214314197
Test: treehugger
Change-Id: I2e5502809f84579bf287364e59d6e7ff67770919
The frame data no longer contains map_XXX fields which represent
the map data. Now there is only a shared pointer to the MapInfo
object with which this frame is associated.
Bug: 120606663
Test: Unit tests pass.
Change-Id: I89282963f742f6fcc07e48533da4108dc16bdce9
It is expensive to keep the non-protobuf path around and it hasn't
been used for an entire release without anyone noticing, so remove it.
Create new end-to-end unit tests that cover tests of the non-proto
code paths that are being deleted.
Bug: 197981919
Test: Unit tests pass.
Change-Id: Ia1c45572300bd63e5f196ad61e5e5386830c8ece
- Use "likelihood" instead of "probability" since that has connotations
of being less precise, and our probability ordering isn't very precise
anyway.
- Hide the fault address with SEGV_MTEAERR because it is not available.
- Pad the fault address with leading zeroes to make it clearer which
bits of the top byte (and any following bytes such as PAC signature
bits) are set.
Bug: 206015287
Change-Id: I5e1e99b7f3e967c44781d8550bbd7158eb421b64
On the main thread, the siginfo pointer will never be nullptr.
Add a CHECK to make sure this is true.
Test: Unit tests pass both 32 bit and 64 bit.
Test: Ran with debug.debuggerd.translate_proto_to_text set to 0
Test: to exercise old path.
Change-Id: I9d5ed0de5d652de8a4f9cd85eb57cbb1ec676404
This code was added, but a svelte config still tries to use scudo
related code that doesn't exist.
Bug: 201007100
Test: Ran unit tests on normal config.
Test: Ran unit tests on svelte config.
Change-Id: Ic84bae37717d213121aef182bac2f82dbee25213
strerror is nice, but usually I don't care about the text, I care about
the uppercase enum
Bug: N/A
Test: N/A
Change-Id: I8ea86220cb04cbded701379c47b8aba8ea8864b8
I was here because we have a case where timeout(1) kills logcat, but
debuggerd alleges that the process that was killed had started less than
a second ago. I'm not sure this is the problem there, but I did notice
that far too many tombstones were claiming improbably short process
uptimes. It turns out that the code was measuring the *thread* uptime,
not the *process* uptime.
Also simplify the code a bit by switching to sysinfo(2) rather than
reading a file.
Test: manual, plus the existing unit test
Change-Id: Ie2810b1d5777ad9182be92bfb3f60795dc978b24
The libunwindstack code will attempt to dlopen the libdexfile.so
when a dex pc is found. Unfortunately, this failed since that
library was not properly listed as a runtime library. To make
sure this doesn't happen again, add an end to end test that
will create a dex pc frame, and will verify the correct
dex function name is in that frame.
Bug: 199043576
Test: Unit test passes on arm/aarch64/x86/x86_64.
Test: Removed the runtime_libs of libdexfile from libunwindstack
Test: and verified the new test fails.
Change-Id: I3a11f9ee44e06e37a547d193b04f7fbb90ccfe0a
The output.text.fd value is only ever -1 when there is a failure.
There is no need to check both < 0 or -1, so only check for -1.
Test: Unit tests pass.
Test: Verified the message is seen on intercept and not on
Test: regular crashes.
Change-Id: I1eddcd5d2342b268ceb261b246c98b10cee85bb4
Revert "Allow visibility on libdexfile for all libdexfile_suppor..."
Revert "Add libdexfile runtime dependency of libdexfile_support."
Revert "Add libdexfile runtime dependency of libdexfile_support."
Revert submission 1810760-libdexfile-runtime-2
Reason for revert: DroidMonitor: Potential culprit for Bug 198352910 - verifying through Forrest before revert submission. This is part of the standard investigation process, and does not mean your CL will be reverted.
Reverted Changes:
If4da968e4:Add libdexfile runtime dependency of libdexfile_su...
I80162942a:Allow visibility on libdexfile for all libdexfile_...
Iab18abc8e:Add libdexfile runtime dependency of libdexfile_su...
I473d146d8:Add libdexfile runtime dependency of libdexfile_su...
Change-Id: Iacab8e0a5c74e0c3185a155e35c28903aa9acb4a
When the switch was made to dump the tombstone from the protobuf,
the fault address marker in the maps section went missing. Re-add
that logic and add new unit tests to verify all of the different
behaviors.
Bug: 193935960
Test: All unit tests pass.
Test: All unit tests pass when setprop debug.debuggerd.translate_proto_to_text 0
Test: The above on cuttlefish, 32 bit and 64 bit.
Test: The above on a flame, 32 bit and 64 bit.
Change-Id: I098bb6ab4bacacae2ca0fc5ec9a73549ed0b9489
The "missing output fd" message can seem like an error, so modify
the message to indicate what is really happening. This message
will occur normally when running the debuggerd command, or when
a bugreport is generated, or when an ANR occurs. In all of those
cases, this is not an error, but an expected action.
Bug: 196189981
Test: Ran debuggerd -b and debuggerd and verified this message is seen.
Test: Ran unit tests.
Change-Id: I6e3d5a76d92b972c77fca301ea7147745bc67c37
The tombstone will add a newline after the abort message, so remove
any trailing newlines before saving/printing.
Bug: 196414062
Test: Unit tests pass.
Test: Set system property debug.debuggerd.translate_proto_to_text to 0
test: and unit tests still pass.
Change-Id: I0d3dc215eb5d8be93d99e5b9d4f0a14b1d61396d
A lot of things had moved out of system/core/ without their TEST_MAPPING
entries having gone with them, reducing the amount of presubmit coverage
for those things.
In order to reduce the likelihood of that happening again, I've pushed
all that remained in the system/core/ TEST_MAPPING down into the
individual subdirectories.
Test: treehugger
Change-Id: Ib75d65f9200fa64ae1552471da6fbe5b7023cf94
