The content parameter of write_file() previously took a char* that was
then converted to a std::string in WriteStringToFd(). One unfortunate
effect of this, is that it is impossible to write data that contains
'\0' within it, as the new string will only contain characters up
until the '\0'.
This changes write_file() to take an std::string, such that
std::string::size() is used to determine the length of the string,
allowing it to contain null characters.
Also change the path parameter of read_file() and write_file() for
consistency.
Lastly, add a test for handling strings with '\0' in them.
Bug: 36726045
Test: Boot bullhead, run unit tests
Change-Id: Idad60e4228ee2de741ab3ab6a4917065b5e63cd8
Use this for bootstat and init. This replaces the custom uptime parser in
bootstat.
This is a reland of aosp/338325 with a stubbed implementation for Darwin.
This change also has clang_format fixes (automatic).
Bug: 34352037
Test: chrono_utils_test
Change-Id: I72a62a3ca1ccfc0a4ccc6294ff1776c263144686
- Emergency shutdown just marks the fs as clean while leaving fs
in the middle of any state. Do not use it anymore.
- Changed android_reboot to set sys.powerctl property so that
all shutdown can be done by init.
- Normal reboot sequence changed to
1. Terminate processes (give time to clean up). And wait for
completion based on ro.build.shutdown_timeout.
Default value (when not set) is changed to 3 secs. If it is 0, do not
terminate processes.
2. Kill all remaining services except critical services for shutdown.
3. Shutdown vold using "vdc volume shutdown"
4. umount all emulated partitions. If it fails, just detach.
Wait in step 5 can handle it.
5. Try umounting R/W block devices for up to max timeout.
If it fails, try DETACH.
If umount fails to complete before reboot, it can be detected when
system reboots.
6. Reboot
- Log shutdown time and umount stat to log so that it can be collected after reboot
- To umount emulated partitions, all pending writes inside kernel should
be completed.
- To umount /data partition, all emulated partitions on top of /data should
be umounted and all pending writes should be completed.
- umount retry will only wait up to timeout. If there are too many pending
writes, reboot will discard them and e2fsck after reboot will fix any file system
issues.
bug: 36004738
bug: 32246772
Test: many reboots combining reboot from UI and adb reboot. Check last_kmsg and
fs_stat after reboot.
Change-Id: I6e74d6c68a21e76e08cc0438573d1586fd9aaee2
Use this for bootstat and init. This replaces the custom uptime parser in
bootstat.
This is a reland of aosp/332854 with a fix for Darwin.
Bug: 34352037
Test: chrono_utils_test
Change-Id: Ib2567d8df0e460ab59753ac1c053dd7f9f1008a7
* Nanosecond precision ended up being harder to grok.
* This change modifies the Timer class to have duration_ms instead of
duration_ns.
Bug: 34466121
Test: adb logcat | grep bootstat
Change-Id: Ibd1c27dc3cb29d838a956e342281b2fb98d752a6
The mismatch of return values makes reasoning about the correctness of
CLs like https://android-review.googlesource.com/317923 quite hard.
Bug: 33941660
Test: Init builds, HiKey boots.
Change-Id: Ia4b8a9af420682997b154a594892740181980921
Mixing open or create, along with attribute(MAC) and permissions(DAC)
is a security and confusion issue.
Fix an issue where fcntl F_SETFD was called to clear O_NONBLOCK, when
it should have been F_SETFL. Did not present a problem because the
current user of this feature does writes and control messages only.
Test: gTest logd-unit-tests and check dmesg for logd content.
Bug: 32450474
Bug: 33242020
Change-Id: I23cb9a9be5ddb7e8e9c58c79838bc07536e766e6
Use to solve the problem of tracefs conditionally being mounted
under debugfs and needing restorecon'd without boot performance
penalty.
Also move skip-ce to a flag for consistency.
Test: Check that trace_mount has correct attributes after boot
Bug: 32849675
Change-Id: Ib6731f502b6afc393ea5ada96fa95b339f14da49
On FBE devices, the filenames inside credential-encrypted directories
are mangled until the key is installed. This means the initial
restorecon at boot needs to skip these directories until the keys
are installed.
This CL changes the implementation of the "restorecon_recursive"
built-in command to use the new SKIPCE flag to avoid labeling files
in CE directories. vold will request a restorecon when the keys
are actually installed.
(cherrypicked from commit 1635afe83d)
Bug: 30126557
Test: Cherry-picked from master
Change-Id: I320584574a4d712c493b5bbd8a79b56c0c04aa58
With this change, init sets a property "init.start" to show the
CLOCK_BOOTTIME time at which init itself started, and for each service
an "init.svc.<name>.start" property to show the CLOCK_BOOTTIME time at
which that service was most recently started.
These times can be used by tools like bootstat to track boot time.
As part of this change, move init over to std::chrono. Also, rather than
make the command-line argument handling more complex, I've switched to
using an environment variable for communication between first- and
second-stage init, and added another environment variable to pass the
start time of the first stage through to the second stage.
Bug: http://b/32780225
Test: manual
Change-Id: Ia65a623e1866ea688b9a5433d6507926ce301dfe
Solve one more issue where privilege is required to open a file and
we do not want to grant such to the service. This is the service side
of the picture, android_get_control_file() in libcutils is the client.
The file's descriptor is placed into the environment as
"ANDROID_FILE_<path>". For socket and files where non-alpha and
non-numeric characters in the <name/path> are replaced with _. There
was an accompanying change in android_get_control_socket() to match
in commit 'libcutils: add android_get_control_socket() test'
Add a gTest unit test for this that tests create_file and
android_get_control_file().
Test: gTest init_tests --gtest_filter=util.create_file
Bug: 32450474
Change-Id: I96eb970c707db6d51a9885873329ba1cb1f23140
* Use const reference type for parameters to avoid unnecessary copy.
* Suppress warning of not using faster overloaded string find function.
Bug: 30407689
Bug: 30411878
Change-Id: I6cfdbbd50cf5e8f3db6e5263076d3a17a9a791ee
Test: build with WITH_TIDY=1
Merged-In: Ie79dbe21899867bc62031f8618bb1322b8071525
I'll come back and remove klog_init when I've removed other calls to it.
Change-Id: Iad7fd26d853b4ddc54e9abd44516b6f138cbbfcb
Test: booted N9, looked at "adb shell dmesg" output.
Create a Parser class that uses multiple SectionParser interfaces to
handle parsing the different sections of an init rc.
Create an ActionParser and ServiceParser that implement SectionParser
and parse the sections corresponding to Action and Service
classes.
Remove the legacy keyword structure and replace it with std::map's
that map keyword -> (minimum args, maximum args, function pointer) for
Commands and Service Options.
Create an ImportParser that implements SectionParser and handles the
import 'section'.
Clean up the unsafe memory handling of the Action class by using
std::unique_ptr.
Change-Id: Ic5ea5510cb956dbc3f78745a35096ca7d6da7085
Support added so init scripts can now import directories.
BUG: 22721249
Change-Id: I02b566bfb50ea84469f1ea0c6ad205435a1df286
TEST: Tested importing a folder on arm64 emulator
Helped debug a problem where the N9 bootloader incorrectly
concatenated the various command lines.
Bug: http://b/20906691
Change-Id: I0580b06f4185129c7eedf0bdf74b5ce17f88bf9c
Don't double mount /dev and its subdirectories anymore. Instead, the
first stage init is solely responsible for mounting it.
Don't have init prepare the property space. This is the responsibility
of the second stage init.
Don't have SELinux use the property space to determine how we should
be running. Instead, create a new function and extract the data we
need directly from /proc/cmdline. SELinux needs this information in
the first stage init process where the property service isn't available.
Change-Id: I5b4f3bec79463a7381a68f30bdda78b5cc122a96
Move fastboot's format logic into fs_mgr, to consolidate the knowledge
about how to do this (and when to wipe metadata).
Try to format these formattable paritions if they are wiped.
If formatting fails, we will fall out to let recovery mode handle it.
Bug: 20082763
Change-Id: I397cc197550e78d932e8a154fd234695c46dbe7b
Also make important events in init's life NOTICE rather than INFO,
and ensure that NOTICE events actually make it to the kernel log.
Also fix the logging so that if you have a printf format string
error, the compiler now catches it.
Also give messages from init, ueventd, and watchdogd distinct tags.
(Previously they'd all call themselves "init", and dmesg doesn't
include pids, so you couldn't untangle them.)
Also include the tag in SELinux messages.
Bug: 19544788
Change-Id: Ica6daea065bfdb80155c52c0b06f346a7df208fe
- Clean up the paths for ro.revision and ro.hardware parsing
- Use ro.hardwre in ueventd instead of parsing the kernel command line
(cherry-pick of 38b340a52f8e864650db8bae1eb88d5c00485db0.)
Bug: 19366018
Change-Id: I018a293f3d46e736a8b65132b5b00b0f7c20edae
This isn't particularly useful in and of itself, but it does introduce the
first (trivial) unit test, improves the documentation (including details
about how to debug init crashes), and made me aware of how unpleasant the
existing parser is.
I also fixed a bug in passing --- unless you thought the "peboot" and "pm"
commands were features...
Bug: 19217569
Change-Id: I6ab76129a543ce3ed3dab52ef2c638009874c3de
For build-system CFLAGS clean-up, fix unused variables.
Use a #define instead of static variable in a header file.
Change-Id: Id47bf38e51644b61a9f3ac1893a16553695f1aac
Add an optional argument to the socket option for specifying
a SELinux security context for the socket. Normally the socket
security context is automatically computed from the service security
context or set using the seclabel option, but this facility allows
dealing with two scenarios that cannot be addressed using the existing
mechanisms:
1) Use of logwrapper to wrap a service.
In this case, init cannot determine the service security context
as it does not directly execute it and we do not want logwrapper
to run in the same domain as the service.
2) Situations where a service has multiple sockets and we want to
label them distinctly.
Change-Id: I7ae9088c326a2140e56a8044bfb21a91505aea11
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Automatically set the SELinux security label on directories created
by init.rc. This avoids the need to separately call restorecon on
each such directory from the init.rc file. Also restorecon /dev
and /dev/socket after initial policy load so that they are labeled
correctly before any other dev nodes or sockets are created.
Change-Id: If6af6c4887cdead949737cebdd673957e9273ead
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
x86 emulator passes hardware name through the androidboot.hardware kernel cmd option, and
ueventd must pick up on it to locate proper ueventd.rc file for that hardware.
Change-Id: Id61c5b67fe6275a15c7aa62556e0b89eda7968f8
eMMC block device names may change based on the detection order of
the eMMC device and any other SD bus devices, such as a removable SD
card.
This patch adds support to init for:
* Symlinks to block devices. When a block device uevent is
processed, if it starts with "/devices/platform", the platform
driver name is parsed out, and symlinks to the block device are
created in /dev/block/platform/<platform driver>/
* Symlinks based on partition name and number. If the uevent for
a block device contains information on the partition name or
number, symlinks are created under
/dev/block/platform/<platform driver>/by-num/p<partition>
and
/dev/block/platform/<platform driver>/by-name/<partition name>
init.rc can then use a device path like the following to mount an
eMMC device:
/dev/block/platform/<platform>/by-name/system /system ro
Change-Id: Id11bb7cdf1e2ada7752a5bd671cbf87237b34ae2
