Processing overhead for selinux violation messages is costly. We want
to deal with bursts of violations, but we have no intent of allowing
that sustained burst to go unabated as there is a cost of processing
and battery usage.
Tunables in libaudit.h are:
AUDIT_RATE_LIMIT_DEFAULT 20 /* acceptable burst rate */
AUDIT_RATE_LIMIT_BURST_DURATION 10 /* number of seconds of burst */
AUDIT_RATE_LIMIT_MAX 5 /* acceptable sustained rate */
Since we can only asymptotically handle DEFAULT rate, we set an upper
threshold of half way between the MAX and DEFAULT rate.
Default kernel audit subsystem message rate is set to 20 a second.
If sepolicy exceeds 125 violation messages over up to ten seconds
(>=~12/s), tell kernel audit subsystem to drop the rate to 5 messages
a second. If rate drops below 50 messages over the past ten seconds
(<5/s), tell kernel it is ok to increase the burst rate back to 20
messages a second.
Test: gTest logd-unit-tests --gtest_filter=logd.sepolicy_rate_limiter_*
Bug: 27878170
Change-Id: I843f8dcfbb3ecfbbe94a4865ea332c858e3be7f2
Some kernels have a bug which causes a newline to show up in audit
messages. The embedded newlines cause one message to look like two due
to prefix controls.
Replace any newlines with spaces. Duplicate spaces are further
consolidated in code immediately after this newly added code.
Test: create an audit message with a newline, and watch it be cleaned up.
Bug: 27878170
Change-Id: Id90c29ab9e10d3be96f51403b0293622d782422a
log selinux audit messages boolean (true or false, default true)
selection for logging destinations:
ro.logd.auditd - turn on logd.auditd to pick up violations.
ro.logd.auditd.dmesg - to the kernel log.
ro.logd.auditd.main - to the "main" log buffer.
ro.logd.auditd.events - to the "events" log buffer.
We used to also read logd.auditd.dmesg and persist.logd.auditd.dmesg
which do not get refreshed when /data mounts internally. This is a
confusing state as these properties will be read after a logd crash
and restart, adjusting the behavior of the logger. Same can be said
for logd.auditd as well. Drop reading these other parameters.
Test: manual set r/o parameters, stop/start logd to confirm behavior
Bug: 33969000
Bug: 27878170
Change-Id: I1a6bb4a903074c9aa7b227cf583a0094d49cbefd
Until the socket ages out, it sticks around and gets reused in
subsequent tests affecting the outcome of those tests. We opt
to run logd.timeout in a forked and isolated process to keep
these conditions from interfering.
Adjusted benchmark execute to only run the tests we are
interested in to improve the time it takes to run.
Commented some areas of code to make them easier to maintain.
Test: gTest logd-unit-tests success
Bug: 33962045
Change-Id: Ic1b98bc4a2d7e8927f1a87628e3bcc368c9cf8ce
Caused +/- field data to land under the Pruned column
This reverts commit 0adcc3e3e8.
Test: manual
Bug: 30118730
Change-Id: Ic75ce3a90baded19f3efc0cc77474fe5d9a8accd
As an extension to the duplicate multiple message filtering, special
case liblog tagged event messages to be summed. This solves the
inefficient and confusing duplicate message report from the DOS attack
detection such as:
liblog: 2
liblog: 2
liblog: 2
liblog: 2
liblog: 3
which would result in:
liblog: 2
chatty: ... expire 2 lines
liblog: 2
liblog: 3
And instead sums them and turns them all into:
liblog: 11
liblog messages should never be subject to chatty conversion.
Test: liblog-benchmarks manually check for coalesced liblog messages
and make sure they do not turn into chatty messages.
Instrumented code to capture sum intermediates to be sure.
Bug: 33535908
Change-Id: I3bf03c4bfa36071b578bcd6f62234b409a91184b
Inspection turned up that for the case of three identical messages,
the result would be a stutter of the first message only. Added
comments to describe the state machine, incoming variables, outcoming
and false condition outputs, for proper maintenance in the future.
Test: gTest liblog-benchmarks BM_log_maximum* and manually check
for correct midstream chatty messages,
Bug: 33535908
Change-Id: I852260d18a484e6207b80063159f1a74eaa83b55
If a series of messages arrive from a single source with identical
message content payload, then suppress them and generate a chatty
report. The checking is done on a per log id basis.
This alters the assumption that chatty messages are always at the
oldest entries, they now show up in the middle too. To address this
change in behavior we print the first line, a chatty reference
which internally takes little space, then the last line in the series.
This does not conserve processing time in logd, and certainly has no
impact on the long path of formatting and submitting log messages from
from the source, but it may contribute to memory space and signal to
noise savings under heavy spammy loads.
Test: gTest liblog-unit-tests, logd-unit-tests & logcat-unit-tests
Bug: 33535908
Change-Id: I3160c36d4f4e2f8216f528605a1b3993173f4dec
To support upcoming disk usage calculation optimizations, this change
creates a new GID for each app that will be used to mark its cached
data. We're allocating these unique GIDs so that we can use
quotactl() to track cached data on a per-app basis.
This change also tightens up the implementation of both the cache
and shared GID calculation to ensure that they stay inside the valid
ranges, and includes tests to verify.
Test: builds, boots, tests pass
Bug: 27948817
Change-Id: Ie4377e5aae267f2da39a165888139228995987cb
Move existing fast<str*cmp> templates for general use, pulled from
the implementation used in logd that dealt with speed through cache
locality and subroutine call mitigation. Rename to fastcmp.
Test: logd-benchmarks and based on manual profiling from the past
Bug: 31456426
Change-Id: Ic62f4a437fc3e06ffdeaae73a6f34e197957a6b0
NULL represents system default. In the future, NULL could represent
static and dynamic tags, which can come from multiple files based on
implementation details in the liblog library.
Test: gTest logd-unit-tests & liblog-unit-tests
Bug: 31456426
Change-Id: I0e3d296de81ca299ae63d7b83781639ee67ec298
Debugging aid. Allows us to run:
$ cat -n '<STUFF>\0EXIT\0' | nc -U /dev/socket/logd
and the pipeline will exit once done. Without the EXIT command
we will have to <CTRL+C> out to terminate the pipeline. This is
necessary since Android's netcat command does not support the -q
feature, and having the EXIT command is faster and cleaner anyways.
Test: manual as noted above.
Bug: 31456426
Change-Id: I65333358188db85e2eb1bb6a14deed1565826ac4
files.[h|cpp] is bound to be abused with junk, replace with
android_get_control_file.[h|cpp]. Plus some sundry cleanup.
Test: gTest libcutils-tests, logd-unit-tests, liblog-unit-tests,
logcat-unit-tests and init_tests
Bug: 32450474
Change-Id: Ibd4a7aa4624ea19a43d1f98a3c71ac37805d36b5
An estimate based on chatty impact for all known pids, uids and tags
and per log id if applicable, calculate the maximum last pruned
watermark iterator map usage and add to the Total Overhead.
Test: Confirm that the Total Overhead change is negligable.
Bug: 31942525
Change-Id: Icd2e9bc0747c3376ca0e9c90aa110c103529d98f
Add in to the Total Overhead the amount of storage we are
using to hold on to the statistics.
Test: see that the Total Overhead accounts for about 100K
Bug: 31942525
Change-Id: Ibe241c0bccc5a9df52395802338c8a7fc3b64104
* changes:
logd: if eng build, be a bit more permissive about failures
libcutils: klog inherit android_get_control_file("/dev/kmsg")
logd: start logd service in logd uid
logd: auditd + klogd control CAPS
logd: drop capabilities in logd --reinit and logd.daemon
logd: drop libminijail dependency
logd: start logd services in logd gid
logd: set executable's capabilities in file system
logd: inherit android_get_control_file()
init: service file keyword
libcutils: add android_get_control_file()
libcutils: add android_get_control_socket() test
Allows us some leaway to investigate logd issues on eng builds
Test: gTests logd-unit-tests, liblog-unit-tests and logcat-unit-tests
Manual on eng builds, bad logd.rc to fake permission issues
Bug: 32450474
Change-Id: I432016e29e5601d67c502076ead941cecdcbebe7
Use libcap instead of libminijail. Set CAP_SETGID before setgroups,
then clear it afterwards.
Test: gTest logd-unit-tests, liblog-unit-tests and logcat-unit-tests
Bug: 32450474
Change-Id: I2ed027fd5efd95f76b1dd4c5791bae5f2ea94c28
Setup and then collect from the environment /proc/kmsg and /dev/kmsg
file descriptors. Do not do so for logcat --reinit.
Test: gTest logd-unit-tests, liblog-unit-tests and logcat-unit-tests
Bug: 32450474
Change-Id: Ied537ca561fcd4e71a9ad9c57398a23ba23f6ced
Do not allow anyone to see logd memory.
Test: gTest logd-unit-tests, liblog-unit-tests and logcat-unit-tests
Bug: 32450474
Change-Id: Ic7377efcb7e1d3cd91b50741061037a0fb589045
getTag() becomes invalid when entry is dropped because mMsg
disappears to save space; but the per-tag spam filter depends on it
still being valid. Conserve space in LogBufferElement by optimizing
the size of the fields, then add a new mTag field that is set in the
object constructor. Add an isBinary() method.
SideEffects: save 12 bytes/log message overhead on 64-bit.
Test: define DEBUG_CHECK_FOR_STALE_ENTRIES and look for stale entries
Bug: 32247044
Change-Id: Iaa5f416718a92c9e0e6ffd56bd5260d8b908d5c0
log/logger.h pieces moved into log/log.h. Correct for some
minor Android Coding standards.
Test: gTests liblog-unit-tests, logd-unit-tests and logcat-unit-tests
Bug: 19235719
Bug: 26552300
Bug: 31289077
Bug: 31456426
Change-Id: I0a19fd8788eec20a582e72e4c62c04534bdb1b9a
Do not make the assumption that if worstPid is set, that the log
buffer id is not LOG_ID_EVENTS or LOG_ID_SECURITY. Add comments
to prevent future over-optimization based on this assumption.
Make sure we reset mLast[id] = begin() when we mark it unset, but
tell optimizer this is an _impossible_ path.
SideEffects: drop two branches in all erase calls, gain an unordered
find() on an empty list for events and security buffers.
Test: gTest logd-unit-tests, liblog-unit-test & logcat-unit-tests
Bug: 32247044
Change-Id: Ic156ca2253c050c28021cedf48bedaf7bd692c09
mLastWorstPidOfSystem is filled with iterator references
that are not from AID_SYSTEM to aid the performance. But
we only clear entries from the list during erase if they
are from AID_SYSTEM. Remove the filter check in erase so
the stale references will be removed.
The conditions that caused this failure are difficult to
reproduce and are rare.
Test: gTests logd-unit-tests, liblog-unit-tests and logcat-unit-tests
Bug: 32247044
Bug: 31237377
Change-Id: Ie405dd643203b816cac15eef5c97600551cee450
Point to log/log.h where necessary, define LOG_TAG where necessary.
Accept that private/android_logger.h is suitable replacement for
log/logger.h and android/log.h.
Correct liblog/README
Effectively a cleanup and controlled select revert of
'system/core: drop or replace log/logger.h' and
'system/core: Replace log/log.h with android/log.h'.
Test: compile
Bug: 30465923
Change-Id: Ic2ad157bad6f5efe2c6af293a73bb753300b17a2
On 64 bit system, calculates to roughly 80 bytes of metadata and
list overhead for each entry.
In unit test example, we report 3388987 bytes of logging data and
overhead total, showmap reports 4652K of dirty data. We still want
to account for the remainder (fragmentation, other sources of
internal allocations etc).
Test: see values and check math
Bug: 31942525
Change-Id: I75f3162ce691faf1ae5a5dec18939fea535ede7e
Allows us to mitigate the impact of MAP_PRIVATE and copy on write by
calling android_lookupEventTag_len instead of android_lookupEventTag,
and delaying the copy on write impact to the later. We return a
string length in a supplied location along with the string pointer
with android_lookupEventTag_len(const EventTagMap* map, size_t* len,
int tag). The string is not guaranteed to be nul terminated. Since
android_lookupEventTag() called even once can cause the memory
impact, we will mark it as deprecated, but we currently have no
timeframe for removal since this is a very old interface.
Add an API for __android_log_is_loggable_len() that accepts the non
null terminated content and fixup callers that would gain because the
length is known prior to the call either in the compiler or at
runtime. Tackle transition to android_lookupEventTag_len() and
fixup callers.
On any application that performs logging (eg: com.android.phone)
/proc/<pid>/smaps before:
xxxxxxxxxx-xxxxxxxxxx rw-p 00000000 fd:00 463 /system/etc/event-log-tags
Size: 20 kB
Rss: 20 kB
Pss: 1 kB
Shared_Clean: 0 kB
Shared_Dirty: 20 kB
Private_Clean: 0 kB
Private_Dirty: 0 kB
Referenced: 0 kB
Anonymous: 20 kB
AnonHugePages: 0 kB
Swap: 0 kB
SwapPss: 0 kB
KernelPageSize: 4 kB
MMUPageSize: 4 kB
Locked: 0 kB
VmFlags: rd wr mr mw me ac
/proc/<pid>/smaps after:
xxxxxxxxxx-xxxxxxxxxx rw-p 00000000 fd:00 1773 /system/etc/event-log-tags
Size: 20 kB
Rss: 20 kB
Pss: 1 kB
Shared_Clean: 20 kB (was 0kB)
Shared_Dirty: 0 kB (was 20kB)
Private_Clean: 0 kB
Private_Dirty: 0 kB
Referenced: 20 kB (was 0kB)
Anonymous: 0 kB (was 20kB)
AnonHugePages: 0 kB
Swap: 0 kB
SwapPss: 0 kB
KernelPageSize: 4 kB
MMUPageSize: 4 kB
Locked: 0 kB
VmFlags: rd wr mr mw me ac
Added liblog-unit-tests --gtest_filter=liblog.event_log_tags to
check for Shared_Clean: to not be 0 and Anonymous: to be 0 for
all processes referencing event-log-tags. Which can include multiple
references to /system/etc/event-log-tags and future possible refs to
/data/misc/logd/event-log-tags and /dev/event-log-tags. We want
failure messages to help point to errant code using the deprecated
interface.
This change saves 1/4MB of memory or more on a typical system.
Test: gTest liblog-unit-tests
Bug: 31456426
Change-Id: I9e08e44d9092bd96fe704b5709242e7195281d33
Should use android/log.h instead of log/log.h as a good example
to all others.
Test: Compile
Bug: 26552300
Bug: 31289077
Change-Id: If4c9711eb57267d4707b03d54a932af9de241b13
Always used in combination with log/logger.h except in log_time.cpp,
and not used externally. As a result liblog has to support stl, a
small price to pay since goal is to convert liblog to C++ internally.
Test: compile
Bug: 31456426
Bug: 26552300
Bug: 31289077
Change-Id: I72828ec807d0a2c8e40bbdebd7a69f147a7ca5a9
pruneRows not necessarily ULONG_MAX when uid not system source,
allow for speed up for status response if pruneRows exhausted.
Change-Id: I38c76bb20215e3d96513a575e2e3bc85a5e5b41c
mLastWorstPidOfSystem is supposed to be indexed by element->getPid()
Bug: 31237377
Bug: 30797725
Bug: 30688716
Change-Id: I81a55e92f175ded1c571a0aa8836736d86b36b1d
- check hdr_size to make sure it is in the expected range
from sizeof entry_v1 to entry (entry_v4).
- alter msg() method to report NULL on invalid hdr_size
- alter all users of msg() method.
Bug: 30947841
Change-Id: I9bc1740d7aa9f37df5be966c18de1fb9de63d5dd
LogBuffer::pidToUid(pid_t pid) { return stats.pidToUid(pid); }
needs to have LogBuffer::lock()/unlock() to prevent unordered_map
data corruption. This can lead to multiple symptoms, crashes and
continuous spins on corrupted iterators.
Bug: 30688716
Bug: 30050636
Bug: 30614675
Bug: 25620123
Bug: 30792935
Change-Id: I1d8fec8e5fda98c6a08645e7456b081507696b3c
dmesg parser could wrap taglen limit resulting in out of bound
accesses. Can lead to crash or data corruption.
Fixed an issue with two-word tag parsing. Switched to case
insensitive tag content matching. Added a few extra limit
checks that could also wrap, simplified the parsing, then added
means to stop using hard coded constants.
Bug: 30688716
Bug: 30050636
Bug: 30614675
Bug: 25620123
Change-Id: Iae4f664f63ef7b842d82eaa1638b6d7a0d28fd18
Skip leading 'c0 32767 ' and place pid (32767 in example) into pid
field of log record.
Bug: 29831823
Change-Id: I9fcd3cb0235dfcad78627736712a20d2dc1250cc
(cherry pick from 2591d483c8)
Best practices so that device can set logd.logpersistd properties.
Values can be overriden with trampolines for persist.logd.logpersistd
values except as designed for empty content to keep out of the way.
This allows us to set logd.logpersistd* for a non-persistent collection
that does not survive a reboot, and to use persist.logd.logpersistd*
for persistent collection that does survive a reboot.
Added logd.logpersistd.enable to gate when logpersist service can be
run allowing the properties to be adjusted safely prior to this state
as is the case for device property.
NB: /init will complain when trying to trampoline an empty property,
this is acceptable for functionality, but may be considered
annoying from the logging perspective.
Bug: 28788401
Bug: 28813587
Bug: 28936216
Bug: 29831823
Change-Id: I97317e8eedfae4daa8e3ef39e64e7c5c23d8b573
Makes code smaller, removes duplication. Using Minijail also allows
adding further sandboxing down the road.
Bug: 30156807
Change-Id: I8fa242fba545049ee82f6655fe6ecc14c53fcab7
Sends first and last of a series of 3 or more indentical avc:
messages to kmsg and adds 'duplicate messages suppressed'
for the last one in the set. eg:
[67.141658] type=1400 audit(1468852100.171:70): avc: ... tcontext=u:object_r:proc:s0 tclass=file
[67.141678] type=1400 audit(1468852107.494:71): avc: ... tcontext=u:object_r:cache_file:s0 tclass=dir
[67.535202] type=1400 audit(1468852107.498:74): avc: ... tcontext=u:object_r:cache_file:s0 tclass=dir duplicate messages suppressed
[67.535227] type=1400 audit(1468852107.888:75): avc: ... tcontext=u:object_r:proc_net:s0 tclass=file
One can look at the sequence numbers in the above example to see that
four identical message were produced, two were dropped.
ToDo: Evaluate multiple streams of duplicate messages.
Bug: 30118730
Change-Id: I31dcda7c8c42edfc7a8f1bf4d9e46284c74b3d18
- Add drop logistics to TagTable
- replace uid references to a key reference since it
is an UID for most buffers, but a TAG for the
events and security buffer
- template the find worst entry mechanics into LogFindWorst class
Bug: 30118730
Change-Id: Ibea4be2c50d6ff4b39039e371365fed2453f17a2
Best practices so that device can set logd.logpersistd properties.
Values can be overriden with trampolines for persist.logd.logpersistd
values except as designed for empty content to keep out of the way.
This allows us to set logd.logpersistd* for a non-persistent collection
that does not survive a reboot, and to use persist.logd.logpersistd*
for persistent collection that does survive a reboot.
Added logd.logpersistd.enable to gate when logpersist service can be
run allowing the properties to be adjusted safely prior to this state
as is the case for device property.
NB: /init will complain when trying to trampoline an empty property,
this is acceptable for functionality, but may be considered
annoying from the logging perspective.
Bug: 28936216
Bug: 29831823
Change-Id: I97317e8eedfae4daa8e3ef39e64e7c5c23d8b573
(cherry pick from commit bf7d0b8875)
The setgid() and setuid() call failure in logd.daemon thread
do not block overall functionality, so clearly tell static
analyzer and developers that we do not care to check their
return values.
SideEffects: None
Bug: 27434072
Change-Id: I6fdc87e8311ebc0173716080bbd72c86b3f00f78
(cherry pick from commit 0ecdec7a09)
release_Locked() is called with a reference count and threadRunning,
the static analyzer can not tell this and estimates that a call to
delete this will occur. So let us invent a new call
release_nodelete_Locked() to ensure it is clear we will not be
arranging a delete this in the context of this code path. The
delete this will follow in the immediate codepath in this function
after threadRunning is cleared, and decRef_Locked() is called.
Change will also remove any developer FUD regarding release_Locked()
usage at this location.
SideEffects: None
Bug: 27434831
Change-Id: I91b060b2dadc72cc449fa381c934afb577bee037
The setgid() and setuid() call failure in logd.daemon thread
do not block overall functionality, so clearly tell static
analyzer and developers that we do not care to check their
return values.
SideEffects: None
Bug: 27434072
Change-Id: I6fdc87e8311ebc0173716080bbd72c86b3f00f78
release_Locked() is called with a reference count and threadRunning,
the static analyzer can not tell this and estimates that a call to
delete this will occur. So let us invent a new call
release_nodelete_Locked() to ensure it is clear we will not be
arranging a delete this in the context of this code path. The
delete this will follow in the immediate codepath in this function
after threadRunning is cleared, and decRef_Locked() is called.
Change will also remove any developer FUD regarding release_Locked()
usage at this location.
SideEffects: None
Bug: 27434831
Change-Id: I91b060b2dadc72cc449fa381c934afb577bee037
A single space character in search terms separates us from a denial of
service attack that forces the device into safe mode. This CL adds a
comment that hopefully stops the spaces from being accidentally deleted
in future.
Change-Id: I33b2632ef4211fa1688ac9c8f0cf7d0c667766c1
external/sepolicy commit bca98efa575bedab68f2d5eaee2cd1fd1741962b
ensures that no permissive domains can be on user builds, and
external/sepolicy commit 3872ee396898fcb23bdc49c37fd02d81014aaa5f
re-enables enforcing mode on cameraserver.
The conditions which lead to the integrity failure detection
triggering can no longer occur. Revert the patch which relaxed
the detection.
This reverts commit 33ee84f871.
Bug: 27313768
Bug: 26902605
Change-Id: I8ee97d0858345695f9df8240de4e696f4a9ba008
Only trigger an integrity failure if a policy is reloaded or
SELinux is disabled. Don't trigger the integrity failure if
we see a permissive=1 denial, which could occur if an SELinux
domain is in permissive mode.
Bug: 27313768
Bug: 26902605
Change-Id: Ib85a2799eb6378ae8acdb965b1812d691183fdd3
(cherry pick from commit 5c77ad55d0)
Allow socket send syscall to terminate after 32 seconds if reader
stalled because of memory pressure allocating new network buffers
Add a gTest to catch regressions, add security buffer to log_dump
Bug: 27242723
Change-Id: Idaa6699d9d284e7f5f723ae0e76b3d6aa3371489
(cherry pick from commit 2ad0bd0a9b)
LogReader.h needs to be individually importable.
Fix a few others, drop includes of local includes, let them be
included in source instead and allow headers to be included
alphabetically. Was not a complete audit since goal was to
separate LogReader.h out from the pack.
Bug: 27242723
Change-Id: Ic7759ef90995e5bd285810706af33550c73cf5b5
Allow socket send syscall to terminate after 32 seconds if reader
stalled because of memory pressure allocating new network buffers
Add a gTest to catch regressions, add security buffer to log_dump
Bug: 27242723
Change-Id: Idaa6699d9d284e7f5f723ae0e76b3d6aa3371489
LogReader.h needs to be individually importable.
Fix a few others, drop includes of local includes, let them be
included in source instead and allow headers to be included
alphabetically. Was not a complete audit since goal was to
separate LogReader.h out from the pack.
Bug: 27242723
Change-Id: Ic7759ef90995e5bd285810706af33550c73cf5b5
If a SELinux policy change or a switch to permissive mode is detected
on a user build, restart the device into safe mode, and keep it there
until an OTA is applied or user data is wiped.
This change deprecates the ro.logd.auditd property.
Needs matching changes from
I781c3059ea8d4fb2f0c923e4488b1932d69678d3
Ica825cf2af74f5624cf4091544bd24bb5482dbe7
Id3ca7889ede30b54b7af73dd50653ca1a20d59aa
Bug: 26902605
Change-Id: Idcdc5bff133f13c1267f0ec0a75cc8cf1ddbda0d
(cherry picked from commit d122ee65b6)
If a SELinux policy change or a switch to permissive mode is detected
on a user build, restart the device into safe mode, and keep it there
until an OTA is applied or user data is wiped.
This change deprecates the ro.logd.auditd property.
Needs matching changes from
I781c3059ea8d4fb2f0c923e4488b1932d69678d3
Ica825cf2af74f5624cf4091544bd24bb5482dbe7
Id3ca7889ede30b54b7af73dd50653ca1a20d59aa
Bug: 26902605
Change-Id: Idcdc5bff133f13c1267f0ec0a75cc8cf1ddbda0d
Usage: android::prdebug(const char *fmt, ...) __printflike(1, 2);
Will add logd prefix tag, log as debug priority in kernel logs,
and will suffix a newline if one is not supplied. To be used to
aid debugging of the logger only.
Change-Id: I217326ef34dc4eb0ea076bacb7a7a8b564c931c3
- limit AID_SYSTEM uid or gid to read security buffer messages
- adjust liblog tests to reflect the reality of this adjustment
To fully test all security buffer paths and modes
$ su 0,0,0 /data/nativetest/liblog-unit-tests/liblog-unit-tests --gtest_filter=liblog.__security*
$ su 1000,1000,1000 /data/nativetest/liblog-unit-tests/liblog-unit-tests --gtest_filter=liblog.__security*
$ su 2000,2000,2000 /data/nativetest/liblog-unit-tests/liblog-unit-tests --gtest_filter=liblog.__security*
ToDo: Integrate the above individually into the gTest Q/A testing
Bug: 26029733
Change-Id: Idcf5492db78fa6934ef6fb43f3ef861052675651
Without this change LogBuffer::prune and LogBuffer::erase
contributes 16.7% and 1.79% respectively. With this change,
they contributes 3.06 and 2.33% respectively. Pruning is
performed roughly 1 in every 255 log entries, a periodic
tamer latency spike.
Bug: 23685592
Change-Id: I6ae1cf9f3559bca4cf448efe8bcb2b96a1914c54
Callers will not guarantee that they can or will ratelimit, we need to
retain the ability to blacklist snet_event_log as a result.
This reverts commit 6aa21b225d.
Bug: 26178938
Change-Id: Ibf47d2e23a84c56f5f72d02312c698df7ff2b601
Bad comment advise in LogBuffer.cpp results in partners failing to
considering using ro.logd.size to set the platform buffer size
default.
NB: It is not good practice to increase the log buffer size to deal
with logspam, as increases will result in logd scale issues getting
closer to hitting the background cgroup cpu cap. Once we hit that
cap, logd spirals, pruning old entries slower than the incoming log
entries. logd.writer will take 100% cpu.
Change-Id: If4a7a74f300d078eeaed0ffd3eb3fd77d1f9fe90
Dangerous bridge to cross to whitelist, who is special, who is not?
Rationalized as these events are used to catch exploits on platform.
As it stands no one should be allowed to block any messages in the
security context, not even for development purposes.
Bug: 26178938
Change-Id: Ibdc76bc0fe29ba05be168b623af1c9f41d7edbd2
Use 1972 as a right delineation. Otherwise use half way point
between the monotonic and realtime. Treat correction factor as
unsigned, ensure that any wrapping to a negative value is
dropped or set to EPOCH. Acknowledge that we can get a more
accurate time track by acquiring the time rather than relying on
healthd timestamp.
Bug: 26331432
Change-Id: I09075fca58676a30cf7d87baf2d4b0f53795abaa
- Add a new statistic that reports per pid and log_id for AID_SYSTEM
- Add a new pruning filter ~1000/! boolean
- Use this new statistic to prune on worst pid within AID_SYSTEM
Bug: 26029733
Bug: 21615139
Bug: 22855208
Change-Id: Iab5dd28f807dcf03d276372853883f3b6afa8294
- enhance property_get_bool, drop property_get_bool_svelte
- enhance base properties with ro and persist variants
- update and fortify README.property
- primarily move auditd and kernel logger into a realm where
they can be controlled by build properties.
- Move logd.klogd to logd.kernel, and add ro.logd.kernel
and persist.logd.kernel.
- Add ro.logd.auditd and persist.logd.auditd.
- Document persist.logd.security
- Document log.tag and persist.logd.tag properties.
- Document ro.logd.size, persist.logd.size and logd.size
properties.
Bug: 26178938
Bug: 26029733
Bug: 17760225
Change-Id: Ibc1a497e45d69db5cf52133937f7ba6fb1d6cd21
Primarily gives access to the Chattiest TIDs and TAGs
associated with a pid.
Has a secondary effect of allowing us to pull out the
command line, comm and in some cases the associated
PACKAGE for a specific pid while the logs are still
present even if the executable is gone.
Bug: 26029733
Bug: 21615139
Change-Id: I1ea63165a680a9318360579b70b1512078ed5682
* changes:
logger.h: reduce maximum payload so sum is page size
liblog: test for maximum payload can not survive change
liblog: logprint use uid name if length less then 5
liblog: logprint add uid format modifier
liblog: readlog apps get logger_entry_v4 for pstore
logd: readlog apps get logger_entry_v4
logger.h: Add definition for logger_entry_v4
klogd is sensitive to changes in timezone resulting in glitches
surrounding conversion to local realtime logging. logger manages
a map from monotonic to realtime, but the process is racey since
the system can change the timezone at any time, this catches those
cases where it glitches.
Bug: 21868540
Change-Id: I03de6675fcd04f18ba7306a24dc3d9e750d86976
Adds the uid field to outgoing content for readlog applications.
AID_LOG, AID_ROOT and AID_SYSTEM gain access to the information.
Bug: 25996918
Change-Id: I0254303c19d174cbf5e722c38844be5c54410c85
If a timeout is specified for the reader, then go to sleep
with the socket open. If the start time is about to get
pruned in the specified log buffers, then wakeup and dump
the logs; or wakeup on timeout, whichever comes first.
Bug: 25929746
Change-Id: I7d2421c2c5083b33747b84f74d9a560d3ba645df
Add parsing to recognize optional chatty effective
percentage field as reported in the logger statistics.
Bug: 22855208
Change-Id: Id9c5e4a907ed0f9319beb9ddbfa27f4844bffc7d
android_log_timestamp returns the property leading letter,
it is better to return a clockid_t with android_log_clockid()
Bug: 23668800
Change-Id: I38dee773bf3844177826b03a26b03215c79a5359
android_log_timestamp returns the property leading letter,
it is better to return a clockid_t with android_log_clockid()
Bug: 23668800
Change-Id: I3c4e3e6b87f6676950797f1f0e203b44c542ed43
Resolve three areas missing taglen checking. Add some additional
limit-checking paranoia. Problem started when p was allowed to
go beyond the size of the incoming buffer in some blind
p = cp + 1 fragments, placed the check for that after them all
before harm could be done, rather than in each location.
Bug: 25620123
Change-Id: Ib5687fd30ef0cd3ba3bc0df310b436ad675ccabc
Although ever present, an increased regression introduced with
commit b6bee33182 (liblog: logd:
support logd.timestamp = monotonic).
A signal handler can interrupt in locked context, if log is written
in the signal handler, we are in deadlock. Block signals while we
are locked. Separate out timestamp lock from is loggable lock to
reduce contention situations. Provide a best-guess response if
lock would fail in timestamp path.
Bug: 25563384
Change-Id: I6dccd6b99ebace1c473c03a785a35c63ed5c6a8a
Add the following mount options to the /proc filesystem:
hidepid=2,gid=3009
This change blocks /proc access unless you're in group 3009
(aka AID_READPROC).
Please see
https://github.com/torvalds/linux/blob/master/Documentation/filesystems/proc.txt
for documentation on the hidepid option.
hidepid=2 is preferred over hidepid=1 since it leaks less information
and doesn't generate SELinux ptrace denials when trying to access
/proc without being in the proper group.
Add AID_READPROC to processes which need to access /proc entries for
other UIDs.
Bug: 23310674
Change-Id: I22bb55ff7b80ff722945e224845215196f09dafa
if ro.logd.timestamp or persist.logd.timestamp are set to the value
monotonic then liblog writer, liblog printing and logd all switch to
recording/printing monotonic time rather than realtime. If reinit
detects a change for presist.logd.timestamp, correct the older entry
timestamps in place.
ToDo: A corner case condition where new log entries in monotonic time
occur before logd reinit detects persist.logd.timestamp, there
will be a few out-of-order entries, but with accurate
timestamps. This problem does not happen for ro.logd.timestamp
as it is set before logd starts.
NB: This offers a nano second time accuracy on all log entries
that may be more suitable for merging with other system
activities, such as systrace, that also use monotonic time. This
feature is for debugging.
Bug: 23668800
Change-Id: Iee6dab7140061b1a6627254921411f61b01aa5c2
Report the ESTIMATED instantaneous percentage decrease or increase
that an UID has to the logs as a result of the chatty filtration.
Bug: 22855208
Change-Id: If1e77afb81a2739a72b39bc7c57071763c1d64d8
- Add device (ro.logd.filter), persistent (persist.logd.filter)
properties to control the default filters
- Allow logcat -P default to produce expected results
- Allow logcat -P disable to produce expected results
Change-Id: I651cb705373ec1e88a99e4b9086da4f9668a468a
Switch from the internal packages.list file parser
implementation to a common parser library.
Change-Id: I87a406802f95d8e7bfd8ee85f723f80e9e6b6c0c
Signed-off-by: William Roberts <william.c.roberts@intel.com>
Chatty logs would distort the average log size by elevating the
elements, but not the size. Add statistical collection for the
number of elements that report chatty, and subtract that from
the number of elements to improve the pruning estimate. Pick
minElements as 1% rather than 10% of the total with this more
accurate number of elements, to a minumum of 4.
Bug: 24511000
Change-Id: I3f36558138aa0b2a50e4fac6440c3a8505d95276
- switch to coalesce instead of merge in naming of functions
and variables. Confusing since we also to merge-sorts and
other activities in the logger.
- define maxPrune rather than using a number in the code path.
Bug: 24511000
