Extend device selection to allow selecting a specific transport via
monotonically increasing identifier (visible in devices -l).
This is useful when using multiple devices (like hikey960...) that
have identical bogus serial numbers like 0123456789ABCDEF.
Bug: http://b/37043226
Test: adb -t {1, 2, 9999999} {get-serialno, shell, features}
Change-Id: I55e5dc5a406a4eeee0012e39b52e8cd232e608a6
Replace a hard-coded 3 second sleep with logic to wait until we've
scanned USB devices once and they've all come online.
Before:
adb shell true 0.00s user 0.00s system 0% cpu 3.047 total
After:
adb shell true 0.00s user 0.00s system 9% cpu 0.041 total
Bug: http://b/37869663
Test: `time adb shell true` after adb kill-server
Change-Id: I251d42afb885908ed9d03167287594ea16650d3f
When device goes offline, user usually has to manually replug the
usb device. This patch tries to solve two offline situations, all
because when adb on host is killed, the adbd on device is not notified.
1. When adb server is killed while pushing a large file to device,
the device is still reading the unfinished large message. So the
device thinks of the CNXN message as part of the previous unfinished
message, so it doesn't reply and the device is in offline state.
The solution is to add a write_msg_lock in atransport struct. And it
kicks the transport only after sending a whole message. By kicking
all transports before exit, we ensure that we don't write part of
a message to any device. So next time we start adb server, the device
should be waiting for a new message.
2. When adb server is killed while pulling a large file from device,
the device is still trying to send the unfinished large message. So
adb on host usually reads data with EOVERFLOW error. This is because
adb on host is reading less than one packet sent from device.
The solution is to use buffered read on host. The max packet size
of bulk transactions in USB 3.0 is 1024 bytes. By preparing an at least
1024 bytes buffer when reading, EOVERFLOW no longer occurs. And teach
adb host to ignore wrong messages.
To be safe, this patch doesn't change any logic on device.
Bug: http://b/32952319
Test: run python -m unittest -q test_device.DeviceOfflineTest
Test: on linux/mac/windows with bullhead, ryu.
Change-Id: Ib149d30028a62a6f03857b8a95ab5a1d6e9b9c4e
Add a 'host-features' command to get the features of the currently
running host adb server. Abuse it to report libusb status.
Bug: http://b/34983123
Test: adb host-features; adb kill-server; ADB_LIBUSB=1 adb start-server; adb host-features
Change-Id: I0e8d503a2dbdff9002ebb6ce8a298498a9421422
Add a libusb-based implementation alongside the existing native
implementations, controlled by the ADB_LIBUSB environment variable.
Windows will need more work for the usb driver.
Bug: http://b/31321337
Test: python test_device.py on linux/darwin, with ADB_LIBUSB=0 and 1
Change-Id: Ib68fb2c6c05475eae3ff4cc19f55802a6f489bb7
Everything should be using the functionfs interface instead by now.
Bug: http://b/34228376
Test: grepping for f_adb, android_adb in source tree
Test: m
Change-Id: I6bc41049c49a867499832588dac8ed108c636c11
This reverts commit afa4b5d6eb.
Add functions to translate errno to and from the linux asm-generic
values, since mips has different values.
Bug: http://b/33058958
Test: python test_device.py with both old and new adbd
Change-Id: I1a122235f3e793ed10b3bf3ad293388015134150
Extend the file sync protocol to support calling regular stat (instead
of lstat), return error codes, and provide the entire stat struct.
Bug: http://b/33058958
Test: python test_device.py with both old and new adbd
Change-Id: I841123debc380f86194a19e91c97d85160112144
bug: 31950237
There are two lists of active ADB transports (devices),
and with the emulator, they can go out of sync.
This CL more conservatively checks if there are no
transports in either list before commiting to
register a new transport for the emulator.
(cherry picked from commit edaedfd5da)
Change-Id: Id1201dc59c70825881dad80925c2e5bcc13dbd5e
Use fixed length types for structs going over the wire, constify
arguments where possible, use char* instead of unsigned char* for
apacket data, and assorted other refactoring.
Bug: http://b/29273531
Test: python test_device.py with every combination of old/new adb and adbd
Change-Id: I0b6f818a32be5386985aa4519f542003cf427f9d
We'd long had two copies of this stuff, so rather than rewrite both
Linux versions to use android::base::Readlink, let's kill the duplication
too...
Bug: http://b/30988271
Change-Id: I4de58a94a22a4b1faf969a6fc70ca1560a4d5121
bugreport() will be soon refactored to track progress, which will
require more comprehensive unit tests.
As such, it's better to move it to its own files, which in turn also
requires moving send_shell_command() and usage() to commandline.h.
Fixes: 30100363
Bug: 30268737
Change-Id: I3cdf114a0b5547293320042ff0749a60886440b0
(cherry picked from commit 78e0963e4b)
(cherry picked from commit 218e1ff759)
Previously we loop through local ports every second, this patch improves
the strategy by retrying only just disconnected emulators.
Bug: 26468076
Bug: 19974213
Bug: 22920867
Change-Id: I43ccb746922d104202b0f81a3d163d850bbc890e
This CL adds support to forward or reverse TCP port 0 to allow the
system to automatically select an open port. The resolved port number
will be printed to stdout:
$ adb forward tcp:0 tcp:8000
12345
$ adb reverse tcp:0 tcp:9000
23456
This allows testing to be more robust by not hardcoding TCP ports which
may already be in use.
Forwarding port 0 is a host-only change and will work with any device,
but reversing port 0 requires the device to be updated with a new adbd
binary.
This CL also does a little bit of cleanup such as moving the alistener
class out of adb.h, and adds some error checking and additional tests.
Bug: 28051746
Test: python -m unittest discover
Test: adb_test
Test: `adb forward` and `adb reverse` with tcp:0
Change-Id: Icaa87346685b403ab5da7f0e6aa186aa091da572
The recent `adb root` changes are incompatible with older versions of
the server. Bump the version number to force the server to restart.
Bug: http://b/28194507
Change-Id: I970806e3b68c1f8e3273a4b1f0ecc4aca5086be9
Also, fix bugs that this uncovered. In particular, the sysdeps_win32
FATAL macro would only print __FUNCTION__.
Change-Id: I6307ec9749edec21b4fee192e135a86ec445c84b
The current permission messages can be confusing for users who don't
know about udev and USB access permissions. This CL adds some checks to
try to identify common udev problems, and adds a link to online
documentation.
Example messages:
1) adb server is in plugdev group but access is still denied:
$ adb devices
List of devices attached
082f59270073e1e3 no permissions (verify udev rules); see [developer.android.com/tools/device.html]
2) plugdev group exists but adb server is not in it:
$ adb shell
error: USB permission failure: udev requires plugdev group membership.
See [developer.android.com/tools/device.html] for more information.
3) plugdev group does not exist:
$ adb shell
error: USB permission failure.
See [developer.android.com/tools/device.html] for more information.
Bug: http://b/25777880
Change-Id: I536565adc12ab657c75151309795674181205db0
We're now able to send packets faster than the device can handle them,
meaning that sometimes we're several packets through before the device
says "hey, wait, I can't write" and closes the connection. At best this
led to us reporting that we couldn't sync because "Connection reset";
at worst we'd get SIGPIPE because we were still streaming to a connection
that had already been closed.
This change renames adb_main adb_server_main, and moves the ignoring of
SIGPIPE into adb_commandline so it applies to both client and server (but
not adbd).
This change doesn't address the "wrong error message" part of the problem,
but at least it means you'll get *an* error message.
Bug: http://b/25230872
Change-Id: Ic60e4d13ed03fdcdf0d5cbc97201ebd1097c16ed
Instead of using the pm command, 'adb install' and 'adb uninstall' will now
use the cmd command. Additionally, the APK will be streamed directly to
package installer instead of creating a temporary file.
(cherry-pick of d039800a4e008b52c532f901e3bb34b40877cf30.)
Change-Id: Ie7529afa5b039d29cc8183f36085ff4e66b3457a
ddmlib does not use the ADB client, but instead connects directly to
the adb server. This breaks some of the assumptions I previously made
when enabling the shell protocol.
To fix this, the adb server now defaults to no protocol for the
standalone command, and the shell protocol must be explicitly requested
by the client. For example:
shell:echo foo -- no shell protocol
shell,v2:echo foo -- shell protocol
As long as I was touching the shell service arguments I also changed
them to no longer duplicate the command-line arguments. This allows
more flexibility to change the adb client CLI if necessary and makes
the code more readable.
Bug: http://b/24148636
Change-Id: I28d5ae578cf18cbe79347dc89cea1750ff4571a8
Devices get a list of supported features from the adb server, not the
client, so a mismatch between client and server features can cause the
device to use an incorrect feature set.
Bumping the server version is the easiest way to make sure the client
and server features match and seems like the best solution at the
moment.
A more automated fix could be to compare client/server features on each
connection and restart if they don't match. This requires an extra
client <-> server round-trip per command, but removes the need to
manually bump the server version number on feature change. Unless the
feature set changes often it didn't seem worth the extra overhead.
Bug: http://b/24370690
Change-Id: I4e43825d1c15c61e5d924fc8d4110b467debde37
Add has_write_error flag in asocket, so it will not wait on local_socket_closing_list
to write pending packets in local_socket_close(). Although it doesn't fix any problem,
it helps to make the code more stable.
Add a missing put_apacket() in error handling.
Add a check when adding local socket in local_socket_closing_list.
Bug: 23314034
Change-Id: I75b07ba8ee59b7f277fba2fb919db63065b291be
Adds functionality for handling stdin/stdout/stderr streams and exit
codes using the shell protocol.
This CL just contains implementation for adbd which will not yet be
enabled. Once we have the ability to query transport features from the
adb client, another CL will add the implementation for the client side
and update the feature list to turn this on.
Note: this CL must be submitted together with a minadbd CL to update
the service_to_fd() function signature.
Bug: http://b/23030641
Change-Id: Ibed55e9c1946d8a35190696163ff63e8fb880238
This allows us to test for features explicitly rather than relying on
the protocol version number, allowing us to fall back gracefully if a
feature is not supported.
This will be needed for the upcoming shell upgrades for stdout/stderr
separation and exit code reporting.
Change-Id: Ibb1d8ad2611f7209901ee76d51346b453e9c5873
First, HOST is always 0 in adbd, which matches ADB_HOST=0.
Second, HOST is always 1 when adb_main is called, which matches ADB_HOST=1.
For adb client that doesn't call adb_main, it never touches local_init(),
init_transport_registration() and fdevent_loop(). So the changes in adb.cpp,
services.cpp and transport_local.cpp do nothing with it.
As a conclusion, I think we can remove HOST and use ADB_HOST instead.
Change-Id: Ide0e0eca7468b6c3c130f6b50974406280678b2e
When "adb start-server" is issued, and a server needs to be launched,
adb client forks itself and the child process runs the server routine.
Once the server initializes its various components, it sends an "OK\n"
back to the client via its stderror (or stdout on Windows).
This sequence breaks down if before sending the "OK\n", the server
happens to log something on its stderr. In order to avoid this, the
client now expects the ack to come on a different fd rather than one
of the standard streams.
Bug: https://code.google.com/p/android/issues/detail?id=182150
Change-Id: I9d58a08068d71eb3b77e8a7377e934631c016466
The reason behing this change is to increase the adb push/pull speed
with reduceing the number of packets sent between the host and the
device because the communication is heavily bound by packet latency.
The change maintains two way compatibility in the communication
protocol with negotiating a packet size between the target and the
host with the CONNECT packets.
After this change the push/pull speeds improved significantly
(measured from Linux-x86_64 with 100MB of data):
| Old push | Old pull || New push | New pull |
-----------------------------------------------------------
Hammerhead | 4.6 MB/s | 3.9 MB/s || 13.1 MB/s | 16.5 MB/s |
-----------------------------------------------------------
Volantis | 6.0 MB/s | 6.2 MS/s || 25.9 MB/s | 29.0 MB/s |
-----------------------------------------------------------
Fugu | 6.0 MB/s | 5.1 MB/s || 27.9 MB/s | 33.2 MB/s |
-----------------------------------------------------------
Change-Id: Id9625de31266e43394289e325c7e7e473379c5d8
The code which triggers these events (via the SHELL_EXIT_NOTIFY_FD) are
only called from code which is already guarded by #if !ADB_HOST.
Change-Id: I184414f5e090c1f08ee117e4c8c434cd4a8b5221
One of my build aliases doesn't play nice with USE_MINGW=1, so my build lied to me. Will revert until I fix it up.
This reverts commit 459df8f3a1.
Change-Id: I7905c5ae5ee85fb2d228ce63d81c79f140998c18
Apparently there are two classes of this warning in clang.
-Wformat-security is only emitted for cases of
`func(nonliteral_fmt_string)` (no args), and -Wformat-nonliteral is
emitted for cases *with* arguments. For whatever reason, the latter
isn't included in -Wextra and must be manually enabled.
To make this more easily portable to Windows, move the existing
gnu_printf/__printf__ decision into base/macros.h as ATTRIBUTE_FORMAT.
Change-Id: I3b0990e1d1f0a2e9c13b32f5cd60478946cb5fc6
Using non-POD types in atransport means we'll need to start treating
it as a real class (specifically with regards to new/delete rather
than malloc/free).
I've also cleaned up the home grown linked lists for transport_list
and pending_list to just be std::lists. We might want to refactor that
again to be an std::unordered_map keyed on serial, since that seems to
be a common way to search it.
Change-Id: I7f5e23cdc47944a9278099723ca029585fe52105
The name "client" is somewhat misleading as it also contains the host
side adb server, but it's a part of the client binary.
Change-Id: I128b7bab213e330eb21b5010cd1fec5f7a62c8af
