The current fastbootd only supports USB protocol. But some Android TV
devices are built without USB port. The fastbootd cannot be used on
those ATV devices due to it.
This change adds TCP protocol for such devices and fastbootd.protocol
property is added to control which protocol to use.
BUG: 152544169
BUG: 155198345
Test: manual test.
Change-Id: Idc391e677eb6a1880036419ba5f6c4160e8dbcbc
Merged-In: Idc391e677eb6a1880036419ba5f6c4160e8dbcbc
If the flashed boot image is smaller than the block device, the AVB
footer will not be at the end of the partition. Although images are
normally created to match the partition size the GKI boot.img must work
on all devices, and the size of the boot partition will vary.
Copy the AVB footer to the end of the partition before flashing, if it
is not there already.
Bug: 156036850
Change-Id: I11f0c7d32d1b6c74edd4f84f815d175605280cb8
Merged-In: I11f0c7d32d1b6c74edd4f84f815d175605280cb8
When merging in recovery, the "imminent data wipe" code was used, which
made the assumption the /metadata and /data state would be zapped. This
caused future OTAs to error because the old snapshots were detected.
This CL allows OTAs to proceed even if unexpected snapshots are present.
It also forces the state to "MergeCompleted" after a merge in recovery,
so that the next normal boot can perform cleanup.
Bug: 155339165
Test: fastboot snapshot-update merge, then take another OTA
vts_libsnapshot_test
Change-Id: Ief6dea3ba76323044e61307272dda320a4494aea
Merged-In: Ief6dea3ba76323044e61307272dda320a4494aea
This code path is effectively dead in adbd, and fastboot's dependency on
libadbd makes it hard to refactor adbd's dependencies.
Bug: http://b/150317254
Test: built and flashed aosp_walleye-eng
Change-Id: I5118136d32fdcbbd011559ed0a4a71e1dc7bf064
Merged-In: I5118136d32fdcbbd011559ed0a4a71e1dc7bf064
(cherry picked from commit 0871824de6)
Using FastbootDevice::GetCurrentSlot to get the current slot suffix
instead of reading the same from the device's boot control HAL
is required to account for the prior set_active commands issued via
fastbootd in the same boot.
Test: fuzzy_fastboot
--gtest_filter=Conformance.Slots:Conformance.SetActive --gtest_repeat=10
Bug: 146589281
Change-Id: I2edb0f024d93c2483659623423ef5c69c717c7af
Merged-In: I2edb0f024d93c2483659623423ef5c69c717c7af
Exporting more properties that can be useful for image compatibility
check, prior to run fastboot flash.
Bug: 74445765
Bug: 144473561
Test: fastboot getvar <new variable>
Change-Id: I2ddfa2c1e9e719e05a3a64b9ca1d608957aebf11
fs_mgr_overlayfs needs access to /metadata to tell whether or not the
scratch partition exists on /data.
Bug: 134949511
Test: adb remount, fastboot flash system
Change-Id: I3a09aae495d691e9c1a1e25a8fb3514e355ecd05
CPU ABI info, e.g., arm64-v8a, can be useful to determine image
compatibility, prior to flash. Adding this info in fastbootd.
Bug: 74445765
Test: fastboot getvar cpu-abi # arm64-v8a
Change-Id: Ied494b646c551320295956b7890c0102fdb88382
When a snapshot is applied or is merging, requests to erase or flash
userdata, metadata, or misc must be protected. In addition, the
set_active command must be restricted when a merge is in progress.
In addition, introduce a "snapshot-update merge" command for assisting
with erase requests when a merge is in progress. As in recovery, this
will force a merge to complete.
Bug: 139154945
Test: apply update
fastboot erase userdata
fastboot erase metadata
fastboot erase misc
fastboot set_active
Change-Id: I152446464335c62c39ffb4cc6366be9de19eac30
This introduces two new commands to the fastboot protocol:
- getvar snapshot-update-status - Return "none", "snapshotted", or
"merging" depending on the current status set by the boot control
HAL.
- snapshot-update [cancel] - Cancel any pending snapshot-based updates
via the boot control HAL. After this, the HAL should return
MergeStatus::CANCELLED and "update-merge-status" should be "none".
If no argument is specified, the snapshot-update-status is returned
via an INFO response.
Bootloaders are expected to implement this in a manner consistent with
the boot control HAL.
Fastboot-based tooling should expect wipes of userdata to fail when
update-merge-status returns "merging". Thus, the force flag now cancel
any pending snapshots.
Bug: 139154945
Test: fastboot getvar snapshot-update-status
fastboot snapshot-update cancel
fastboot snapshot-update
Change-Id: Idc423fe7656b212e929e64eb0e6b85b453e0e8dc
Skip importing COW group because they are dynamically
created by OTA clients and will never show up in built
images.
Test: flash
Change-Id: I44e7693cfb4c15e64455b56212a02f9abde88d61
When flashing or resizing partitions, remove the
LP_PARTITION_ATTR_UPDATED flag. This will cause first-stage init to skip
any snapshots for that partition, and the backing storage (if any)
will later be reclaimed.
Bug: 139155473
Test: manual test
Change-Id: I3b185f68dfecb5a93636af0b5ae289ead1363fd0
Introduce a parameter struct to eliminate parameter explosion, and refactor
existing callers to use the new helper.
Test: manual test
Bug: 135752105
Change-Id: I0c5ebe4e084ad7503c2ac6c65886a71505d50d00
This is no longer needed as CreateLogicalPartition() ensures the
obtained path will not race with device deletion.
Bug: 135771280
Test: device builds, flashes
Change-Id: I821290aa08fede99d5c51cd68681c351a1ea97bc
These tend to get manually, so let's promote to actual helpers.
Bug: 134536978
Test: liblp_test gtest
Change-Id: Ifb79c8d6f247cc3f9635bf6adfd1c99907340002
non-aio USB read function was stuck in a loop waiting for more data
because data length parameter is always set 64 for fastbootd commands.
It should be a normal case to get less data than expected
since lengths of these commands are usually less than 64.
Add logic to check this and one more parameter to distinguish
fastbootd from general adbd case.
Bug: 133189029
Test: try various fastbootd commands
Change-Id: I6690324840d78f3f1e04235040301520329976db
Merged-In: I6690324840d78f3f1e04235040301520329976db
Currently if the device is unplugged from host,
there is a lot of log spamming since fastbootd
does not not recognize that the device has been
disconnected and keeps trying to read/write to the
device.
2856 printk messages dropped ** [ 169.941904] c7 579 fastbootd: aio: got error event on
read total bufs 1: No such devie
** 2960 printk messages dropped ** [ 169.953328] c7 579 fastbootd: Fastboot command:
** 2074 printk messages dropped ** [ 169.961355] c7 579 fastbootd: aio: got error event
on read total bufs 1: No such devie
Bug: 121333158
Test: unplug device and check for log spam multiple times
Change-Id: I1d4c6f48f34e313c5ebce23d62a4fe6a6373f94f
This command erroneously reports that no GSI is installed, because
/metadata is not mounted in recovery. To address this, temporarily mount
/metadata when the gsi command is invoked.
Bug: 122556707
Test: fastboot gsi disable
fastboot gsi wipe
Change-Id: Ib21971b49b46fd580b902ff75f01cfb96192afc0
And deprecate one more old style function that is not used after this
change.
Test: boot, disable and enable verity
Change-Id: Id509f479850120352b4ea4dc3b6c40f6e8e2e53e
Note: this only removes the bootable marker, since we're unable to
remove the userdata files within recovery.
Bug: 121210348
Test: fastboot gsi wipe
fastboot gsi disable
Change-Id: I64fe848c787d426ae9d18a1557a9d6b340bfc2cf
When the update-super command is issued, we want overlayfs overrides
to disappear without a doubt, which includes non-A/B utilizing
/cache/overlay/ tree. Call fs_mgr_overlayfs_teardown() on successful
return.
Test: adb-remount-test.sh
Bug: 120034852
Change-Id: Ia5cdb797f7e8350b5591a51fc8ae5f323901aee4
Retrofit devices will have two super partitions, spanning the A and B
slots separately. By design an OTA will never cause "A" or "B"
partitions to be assigned to the wrong super. However, the same is not
true of fastbootd, where it is possible to flash the inactive slot. We
do not want, for example, logical "system_a" flashing to super_b.
When interacting with partitions, fastbootd now extracts the slot suffix
from a GetSuperSlotSuffix() helper. On retrofit devices, if the partition
name has a slot, that slot will override FastbootDevice::GetCurrentSlot.
This forces partitions in the inactive slot to be assigned to the correct
super.
There are two consequences of this. First, partitions with no slot
suffix will default to the current slot. That means it is possible to
wind up with two "scratch" partitions, if "adb remount" is used on both
the "A" and "B" slots. However, only the active slot's "scratch" will be
visible to the user (either through adb or fastboot).
Second, if one slot does not have dynamic partitions, flashing will
default to fixed partitions. For example, if the A slot is logical and B
is not, flashing "system_a" will be logical and "system_b" will be
fixed. This works no matter which slot is active. We do not try to
upgrade the inactive slot to dynamic partitions.
Bug: 116802789
Test: fastboot set_active a
fastboot flashall # dynamic partitions
fastboot getvar is-logical:system_a # true
fastboot getvar is-logical:system_b # false
fastboot set_active b
fastboot flashall --skip-secondary
fastboot getvar is-logical:system_a # true
fastboot getvar is-logical:system_b # true
Booting both slots works.
Change-Id: Ib3c91944aaee1a96b2f5ad69c90e215bd6c5a2e8
This patch adds a new variable, "super-partition-name", to query the
name of the super partition (with a slot suffix if it has one). The
fastboot flashing tool has been updated to query this variable.
Since the super partition name can no longer be determined without
fastbootd, the presence of super_empty.img is used to test for
dynamic partition support rather than the presence of a super partition.
Bug: 116802789
Test: fastboot flashall on retrofit device
Change-Id: If830768eba6de7f31ac3183c64167fae973c77a4
When updating the super partition, attempt to preserve partitions from
the other slot. If any partition can't be preserved, fail and require a
wipe (-w) to proceed. This allows two bootable builds to be flashed to
both slots.
The preserve operation can fail if the metadata is not compatible with
the old partition layout. For example, if the partition references a
group that no longer exists, or a group changed its capacity, or the
metadata's block device list or list contents changed.
Bug: N/A
Test: liblp_test gtest
fastboot flashall --skip-secondary
Change-Id: I53fdd29bc1f0ef132005a93d3cf1cdcd7f2fc05f
Without this, it is much more difficult to ensure that the "a" and "b"
slots are both bootable during development. We already update all
metadata slots for update-super, so we should here as well.
Bug: N/A
Test: fastboot flashall
fastboot set_active other
fastboot flashall
Change-Id: Ib661e35fa89171a68a0b1da195dc5ba0375d72e4
Arrange to delete the overlayfs backing when a specified partition
has been flashed.
Test: manual
Bug: 109821005
Bug: 117605276
Change-Id: I1c6a0341c6cd2ecfbb7c71bec5679a74d579aadd
The purpose of this code was to support preserving partitions across a
flashall operation. Since we are not supporting persistent read-write
partitions, this merging code is effectively useless - it is preserving
only partitions that will be deleted.
Additionally, this code does not merge partition group changes, since
doing so accurately is difficult. Partition size changes aren't sent
until after update-super resolves, so a valid re-grouping could be
rejected during update-super if the existing partitions are too big.
This patch removes the update-super merging code until a use case comes
along and we can properly evaluate how it should work.
Bug: N/A
Test: fastboot flashall
Change-Id: I1d622b23dabdf031897be9de49f59fc8cf3caf3b
Cleanup to utilize all the manifest values in constants.h.
If the cli command _and_ the protocol name match, use a common
source of convenient truth. This should set a pattern for future
additional commands. When the command and the protocol differ,
we want to introduce resistance as it results in confusion and
maintenance issues.
Test: compile
Change-Id: Idad413c63cbbfcb6e851856105a5d5a9ef53ef29
Bug: 78793464
Test: fastboot flashall
Sparse images with CRC are not supported by the Android build
system and hence the calculated CRC is unused.
Change-Id: Ia48b2f7e29f2adea26d185c5a8f2337c4cbe6dcb
Boot control HAL implementations will return the current boot
slot as the active slot. If a set_active command is issued on another
slot, it should be considered as the new active slot and subsequent
flashes should flash the same.
Test: fastboot set_active "b", fastboot getvar current-slot
Bug: 78793464
Change-Id: Ida3817670de8e74a7d7ae2a905e7ac1756c6bdf1
This is required to pass fuzzy_fastboot conformance tests.
Also, allow for zero sized partitions in fuzzy_fastboot.
Test: ./fuzzy_fastboot --gtest_filter=Conformance.Slots
Bug: 117220134
Change-Id: Ifb12994a7796b081215084cb68b37674210aaa12
